Construction of a Pickering interfacial biocatalysis system in skim milk and enzymatic transesterification for enhancement of flavor and quality

Despite considerable research efforts, lipase catalysis in a fluid milk system with aqueous multi-component mixtures containing multiple microphases, remains challenging. Pickering interfacial biocatalysis (PIB) platforms are typically fabricated with organic solvents/lipids and water. Whether a PIB with excellent catalytic performance can be constructed in complex milk mixtures remains unknown. Here, we challenged PIB with skim milk, and a small amount of flaxseed oil, and phytosterols as a model system for transesterification and lipolysis to enhance quality and flavor. The amino-modified mesoporous silica spheres (MSS-N) were employed as an emulsifier and carrier of lipase AYS (AYS@MSS-N). The conversion of phytosterol esters reached 75.5% at 1.5 h and prepared phytosterol ester-fortified milk with a content of 1.0 g/100 mL. The relative conversion rate remained above 70% after 6 cycles. In addition, the fortified milk showed an intensified and favorable effect on sensory traits through volatile flavor composition analysis. The findings provide a versatile alternative for PIB applications in complex environments, i.e., milk, which might inspire a new bioprocess strategy for dairy products.

Preparation and investigation of novel endopeptidase-exopeptidase co-immobilized nanoflowers with improved cascade hydrolysis

Enzymatic hydrolysis is a promising approach for protein and food processing. However, the efficiency of this approach is constrained by the self-hydrolysis, self-agglomeration of free enzymes and the limited applicability resulted from enzymes' selectivityt. Here, novel organic-inorganic hybrid nanoflowers (AY-10@AXH-HNFs) were prepared by coordinating Cu2+ with both endopeptidase of PROTIN SD-AY10 and exopeptidase of Prote AXH. The results indicate that the AY-10@AXH-HNFs exhibited 4.1 and 9.6 times higher catalytic activity than free Prote AXH and PROTIN SD-AY10, respectively, for the enzymatic hydrolysis of N-benzoyl-L-arginine ethyl ester (BAEE). The kinetic parameters of Km, Vmax and Kcat/Km by AY-10@AXH-HNFs were determined to be 0.6 mg/mL, 6.8 mL·min/mg and 6.1 mL/(min·mg), respectively, surpassing the values obtained from free endopeptidase and exopeptidase. Furthermore, the ability of AY-10@AXH-HNFs to retain 41 % of their initial catalytic activity after undergoing 5 cycles of repeated use confirmed their stability and reusability. This study introduces a novel approach of co-immobilizing endopeptidase and exopeptidase on nanoflowers, resulting in significantly enhanced stability and reusability of the protease in catalytic applications.

An efficient and robust continuous-flow bioreactor for the enzymatic preparation of phytosterol esters based on hollow lipase microarray

In this study, a continuous-flow bioreactor packed with well-organized lipase microarrays was developed for the sustainable synthesis of functional lipid-phytosterol esters (PEs). Hollow mesoporous silicon spheres with a suitable pore size were prepared for lipase immobilization, and the hydrophobic modification endowed the lipase with excellent catalytic activity and stability. The results showed that the condensely packed lipase microarrays offered large specific surface areas and guaranteed the thorough interaction between the lipase and substrates in the continuous-flow bioreactor. Meanwhile, the substrate could pass through the reactor at 1 mL/min with a high conversion of 93.6% due to the hollow structure of the packing spheres. Moreover, the reactors were able to produce 1564 g PEs/g catalyst in a continuous 30-day processing period, which set the highest records for PEs synthesis. This sustainable and highly-converting flow system provided a feasible path for scale-up production of PEs in the food processing area.

Immobilized Lipase Based on Hollow Mesoporous Silicon Spheres for Efficient Enzymatic Synthesis of Resveratrol Ester Derivatives

Enzymatic esterification of resveratrol is crucial for its potential application in lipophilic foods and drugs. However, the poor activity of the free enzyme hinders the reaction. In this work, the highly efficient enzymatic synthesis of resveratrol ester derivatives was achieved by immobilized lipase on hydrophobic modified hollow mesoporous silicon spheres (HMSS-C₈). We preliminarily explored the use of Candida sp. 99-125 lipase (CSL) for the acylation of resveratrol, with a regioselectivity toward 3-OH- over 4'-OH-acylation. HMSS-C₈ provided ideal accommodation for CSL with a loading capacity of up to 652 mg/g. The catalytic efficiency of CSL@HMSS-C₈ was 15 times higher than that of free CSL, and the conversion of resveratrol reached 98.7% within only 2 h, which is the fastest value recorded in the current literature. After 10 cycles, the conversion remained up to 86.3%. Benefiting from better lipid solubility, the relative oxidation stability index values of oil containing monoester derivatives were 43.1%-68.8% and 23.9%-33.2% higher than that of refined oil and oil containing resveratrol, respectively. This research provides a new pathway for efficient enzymatic synthesis of resveratrol ester derivatives and demonstrates the potential application of resveratrol monoester derivatives as a group of excellent lipid-soluble antioxidants.

Enzymatic preparation of phytosterol esters with fatty acids from high-oleic sunflower seed oil using response surface methodology

Phytosterol esters are functional compounds that can effectively reduce plasma cholesterol concentration, and have wide applications in the food industry. In this study, a simple and efficient enzymatic method was successfully applied to synthesize phytosterol oleic acid esters with fatty acids from high-oleic sunflower seed oil. Among the tested lipases, Candida rugosa lipase (CRL) exhibited higher catalytic activity in the esterification of phytosterols with fatty acids (oleic acid 84%) from high-oleic sunflower seed oil. Box-Behnken design and response surface methodology were used to investigate the influence of reaction factors on the conversion of phytosterols. The maximum conversion of phytosterols (96.8%) and yield of phytosterol esters (92%) could be obtained under optimal conditions: reaction temperature 50 °C, a molar ratio of phytosterols to fatty acids at 1 : 2.3, enzyme loading of 5.8%, isooctane volume of 2 mL and reaction time of 2 h. It was noteworthy that this enzymatic esterification method indeed expended a much shorter reaction time (2 h) than that observed in previous reports. In general, the enzymatic preparation of phytosterol oleic acid esters with fatty acids from high-oleic sunflower seed oil will be a simple and rapid method for producing unsaturated fatty acid esters of phytosterol with both higher oil solubility and oxidative stability, which is beneficial as functional food ingredients.

A GDSL lipase-like from Ipomoea batatas catalyzes efficient production of 3,5-diCQA when expressed in Pichia pastoris

The synthesis of 3,5-dicaffeoylquinic acid (3,5-DiCQA) has attracted the interest of many researchers for more than 30 years. Recently, enzymes belonging to the BAHD acyltransferase family were shown to mediate its synthesis, albeit with notably low efficiency. In this study, a new enzyme belonging to the GDSL lipase-like family was identified and proven to be able to transform chlorogenic acid (5-O-caffeoylquinic acid, 5-CQA, CGA) in 3,5-DiCQA with a conversion rate of more than 60%. The enzyme has been produced in different expression systems but has only been shown to be active when transiently synthesized in Nicotiana benthamiana or stably expressed in Pichia pastoris. The synthesis of the molecule could be performed in vitro but also by a bioconversion approach beginning from pure 5-CQA or from green coffee bean extract, thereby paving the road for producing it on an industrial scale.

Miguel et al. identify a new enzyme belonging to the GDSL lipase-like family that is involved in the final stage of transformation of 5-CQA into 3,5-diCQA. This enzyme is able to realize an efficient transformation by over 60%, making the transformation process a valuable technological tool that can be easily transferred on an industrial scale.

Alcalase Microarray Base on Metal Ion Modified Hollow Mesoporous Silica Spheres as a Sustainable and Efficient Catalysis Platform for Proteolysis

The industrial exploitation of protease is limited owing to its sensitivity to environmental factors and autolysis during biocatalytic processes. In the present study, the alcalase microarray (Bacillus licheniformis, alcalase@HMSS-NH₂-Metal) based on different metal ions modified hollow mesoporous silica spheres (HMSS-NH₂-Metal) was successfully developed via a facile approach. Among the alcalase@HMSS-NH₂-Metal (Ca²⁺, Zn²⁺, Fe³⁺, Cu²⁺), the alcalase@HMSS-NH₂-Fe³⁺ revealed the best immobilization efficiency and enzymatic properties. This tailor-made nanocomposite immobilized alcalase on a surface-bound network of amino-metal complex bearing protein-modifiable sites via metal-protein affinity. The coordination interaction between metal ion and alcalase advantageously changed the secondary structure of enzyme, thus significantly enhanced the bioactivities and thermostability of alcalase. The as-prepared alcalase@HMSS-NH₂-Fe³⁺ exhibited excellent loading capacity (227.8 ± 23.7 mg/g) and proteolytic activity. Compared to free form, the amidase activity of alcalase microarray increased by 5.3-fold, the apparent kinetic constant V_max/K_m of alcalase@HMSS-NH₂-Fe³⁺ (15.6 min⁻¹) was 1.9-fold higher than that of free alcalase, and the biocatalysis efficiency increased by 2.1-fold for bovine serum albumin (BSA) digestion. Moreover, this particular immobilization strategy efficiently reduced the bioactivities losses of alcalase caused by enzyme leaking and autolysis during the catalytic process. The alcalase microarray still retained 70.7 ± 3.7% of the initial activity after 10 cycles of successive reuse. Overall, this study established a promising strategy to overcome disadvantages posed by free alcalase, which provided new expectations for the application of alcalase in sustainable and efficient proteolysis.

Inhibition assays of free and immobilized urease for detecting hexavalent chromium in water samples

The present work describes the inhibition studies of free as well as immobilized urease by different heavy metals. Porous silicon (PS) films prepared by electrochemical etching were used for urease immobilization by physical adsorption. The enzyme was subjected to varying concentrations of Cr⁶⁺, Cr³⁺, Cu²⁺, Fe²⁺, Cd²⁺ and Ni²⁺ and analyzed for the variation in the activity. To study the effect of other heavy metals on the interaction of urease and Cr⁶⁺, free as well as immobilized urease was subjected to the combination of each metal ion with Cr⁶⁺. Results proved the sensitivity of free as well as immobilized urease towards heavy metals by observed reduction in activity. Immobilized urease showed less degree of inhibition compared to free urease when tested for inhibition by individual metal ions and in combination with Cr⁶⁺. IC₅₀ values were found higher for inhibition by the combination of metal ions with Cr⁶⁺. Interaction of heavy metal ions with functional groups in active site of urease and limitations of mass transfer are the two factors responsible for the variation in activity of urease. Relation between the variation of urease activity and amount of heavy metals can be applied in biosensor development for determining the concentration of Cr⁶⁺ present in the water samples.

Preparation of immobilized lipase by modified polyacrylonitrile hollow membrane using nitrile-click chemistry

The application of immobilized lipase in the enzymatic production of biodiesel has shown numerous advantages. In this study, surface of Polyacrylonitrile (PAN) hollow membrane was first modified using nitrile-click chemistry in order to fit for interaction with enzyme proteins. Then sodium alginate (SA) was introduced and the membrane was post-treated by CaCl₂. When the prepared PAN-PEI-SA-CaCl₂ was used for lipase immobilization, the protein loading was 36.90 mg/g, and the enzyme activity reached up to 54.47 U/g, which was 2.5 times as much as that of Novozym® 435. As a result, the constructed immobilized lipase obtained a maximum biodiesel yield of 78.5%, which was 2.4 times that of the Novozym® 435 in transesterification reactions. Moreover, the biodiesel yield decreased by only 11% after the immobilized enzyme was continuously used for 20 times. This study exhibits that this technic has broad application prospects in the field of conversion of biomass resources.

Synthesis and characterization of B–C polymer hollow microspheres from a new organodecaborane preceramic polymer

A new poly(norbornenyldecaborane-co-hexadiene) (P(NB-co-DE)) copolymer as a kind of boron carbide preceramic polymer was synthesized by the ROMP reaction. And it was used to fabricate B–C polymer hollow microspheres by microencapsulation.