Pyridine appended pyrimidine bis hydrazone: Zn2+/ATP detection, bioimaging and functional properties of its dinuclear Zn(II) complex

A pyridine functionalized pyrimidine-based system, H2P was successfully synthesized, characterized, and evaluated for its remarkable selective characteristics towards Zn2+ and ATP ions. The chemical sensing capabilities of H2P were demonstrated through absorption, fluorescence, and NMR spectroscopic techniques. The probe exhibited outstanding sensitivity when interacting with the ions, demonstrating relatively strong association constants and impressively low detection limits. The comprehensive binding mechanism of H2P with respect to Zn2+ and ATP ions was investigated using a combination of analytical methods, including Job's plot, NMR spectroscopy, mass spectrometry, and density functional theory (DFT) experiments. The interesting sensing ability of H2P for Zn2+/ATP ions was harnessed for live cell bioimaging and other diverse on-site detection purposes, including paper strips, cotton swabs, and applications involving mung bean sprouts. Further, the fluorescent probe demonstrated its effectiveness in detecting Zn2+ and ATP within live cells, indicating its significant potential in the realm of biological imaging applications. Moreover, the molecular configuration of the zinc complex (H2P-Zn2Cl4), derived from H2P, was elucidated using X-ray crystallography. This complex exhibited intriguing multifunctional attributes, encompassing its capability for detecting picric acid and for reversible acid/base sensing responses. The enhanced conducting behavior of the complex as well as its resistance properties were investigated by performing I-V characteristics and electrochemical impedance spectroscopic (EIS) experiments respectively.

AIEgens in Solar Energy Utilization: Advances and Opportunities

Solar energy is the most abundant energy resource on earth. Unfortunately, only a very small portion of the solar radiation can be utilized by current light-harvesting materials, thus leading to the poor utilization efficiency of solar energy. In this regard, aggregation-induced emission luminogens (AIEgens) have demonstrated versatile properties that can enhance energy conversion and potentially revolutionize solar utilization systems. AIEgens with great processability can selectively absorb radiation across multiple spectral regions and transform solar energy into longer-wavelength light, heat, or alternative forms of energy. These processes can considerably enhance the solar energy utilization performance by either developing light-harvesting systems based on AIEgens or hybridizing modern light-harvesting systems with AIE technology. In this Perspective, based on material properties, we highlight different functions of AIEgens related to solar light utilization, including sunlight transformation, chemical conversion, and thermal conversion.

Solar energy conversion using first row d-block metal coordination compound sensitizers and redox mediators

The use of renewable energy is essential for the future of the Earth, and solar photons are the ultimate source of energy to satisfy the ever-increasing global energy demands. Photoconversion using dye-sensitized solar cells (DSCs) is becoming an established technology to contribute to the sustainable energy market, and among state-of-the art DSCs are those which rely on ruthenium(ii) sensitizers and the triiodide/iodide (I3 -/I-) redox mediator. Ruthenium is a critical raw material, and in this review, we focus on the use of coordination complexes of the more abundant first row d-block metals, in particular copper, iron and zinc, as dyes in DSCs. A major challenge in these DSCs is an enhancement of their photoconversion efficiencies (PCEs) which currently lag significantly behind those containing ruthenium-based dyes. The redox mediator in a DSC is responsible for regenerating the ground state of the dye. Although the I3 -/I- couple has become an established redox shuttle, it has disadvantages: its redox potential limits the values of the open-circuit voltage (V OC) in the DSC and its use creates a corrosive chemical environment within the DSC which impacts upon the long-term stability of the cells. First row d-block metal coordination compounds, especially those containing cobalt, and copper, have come to the fore in the development of alternative redox mediators and we detail the progress in this field over the last decade, with particular attention to Cu2+/Cu+ redox mediators which, when coupled with appropriate dyes, have achieved V OC values in excess of 1000 mV. We also draw attention to aspects of the recyclability of DSCs.

Two viologen-based photoluminescent compounds: excitation-wavelength-dependent and photoirradiation-time-dependent photoluminescent switches

We synthesized two isostructural multi-coloured photoluminescent coordination polymers. They exhibit excitation-wavelength-dependent photoluminescence emission and photoirradiation-time-dependent photoluminescence emission in solid-state.

Stretchable and colorless freestanding microwire arrays for transparent solar cells with flexibility

Transparent solar cells (TSCs) are emerging devices that combine the advantages of visible transparency and light-to-electricity conversion. Currently, existing TSCs are based predominantly on organics, dyes, and perovskites; however, the rigidity and color-tinted transparent nature of those devices strongly limit the utility of the resulting TSCs for real-world applications. Here, we demonstrate a flexible, color-neutral, and high-efficiency TSC based on a freestanding form of n-silicon microwires (SiMWs). Flat-tip SiMWs with controllable spacing are fabricated via deep-reactive ion etching and embedded in a freestanding transparent polymer matrix. The light transmittance can be tuned from ~10 to 55% by adjusting the spacing between the microwires. For TSCs, a heterojunction is formed with a p-type polymer in the top portion of the n-type flat-tip SiMWs. Ohmic contact with an indium-doped ZnO film occurs at the bottom, and the side surface has an Al₂O₃ passivation layer. Furthermore, slanted-tip SiMWs are developed by a novel solvent-assisted wet etching method to manipulate light absorption. Finite-difference time-domain simulation revealed that the reflected light from slanted-tip SiMWs helps light-matter interactions in adjacent microwires. The TSC based on the slanted-tip SiMWs demonstrates 8% efficiency at a visible transparency of 10% with flexibility. This efficiency is the highest among Si-based TSCs and comparable with that of state-of-the-art neutral-color TSCs based on organic-inorganic hybrid perovskite and organics. Moreover, unlike others, the stretchable and transparent platform in this study is promising for future TSCs.

Tuning structures and emissive properties in a series of Zn(ii) and Cd(ii) coordination polymers containing dicarboxylic acids and nicotinamide pillars

The influence of the metal, ligand, and solvent on structures and emission properties was monitored.

Thermally-induced single-crystal-to-single-crystal transformations from a 2D two-fold interpenetrating square lattice layer to a 3D four-fold interpenetrating diamond framework and its application in dye-sensitized solar cells

In this work, a rare 2D → 3D single-crystal-to-single-crystal transformation (SCSC) is observed in metal-organic coordination complexes, which is triggered by thermal treatment. The 2D two-fold interpenetrating square lattice layer [Cd(IBA)2]n (1) is irreversibly converted into a 3D four-fold interpenetrating diamond framework {[Cd(IBA)2(H2O)]·2.5H2O}n (2) (HIBA = 4-(1H-imidazol-1-yl)benzoic acid). Consideration is given to these two complexes with different interpenetrating structures and dimensionality, and their influence on photovoltaic properties are studied. Encouraged by the UV-visible absorption and HOMO-LUMO energy states matched for sensitizing TiO2, the two complexes are employed in combination with N719 in dye-sensitized solar cells (DSSCs) to compensate absorption in the ultraviolet and blue-violet region, offset competitive visible light absorption of I3(-) and reducing charge the recombination of injected electrons. After co-sensitization with 1 and 2, the device co-sensitized by 1/N719 and 2/N719 to yield overall efficiencies of 7.82% and 8.39%, which are 19.94% and 28.68% higher than that of the device sensitized only by N719 (6.52%). Consequently, high dimensional interpenetrating complexes could serve as excellent co-sensitizers and have application in DSSCs.

Halogen-bridged metal–organic frameworks constructed from bipyridinium-based ligand: structures, photochromism and non-destructive readout luminescence switching

Halogen-bridged photochromic metal–organic frameworks have been reported, and one can exhibit photomodulated luminescence featuring a non-destructive readout capability.

Tunable Luminescence and Application in Dye-Sensitized Solar Cells of Zn(II)/Hg(II) Complexes: Methyl Substitution-Induced Supramolecular Structures Based on (E)-N-(6-Methoxypyridin-2-ylmethylene)arylamine Derivatives

Using Schiff-base ligands (E)-N-(6-methoxypyridin-2-yl)(CH═NAr) (where Ar = C6H5, L1; 2-MeC6H4, L2; 2,4,6-Me3C6H2, L3), six Zn(II)/Hg(II) complexes, namely, [ZnL1Cl2] (Zn1), [HgL1Cl2] (Hg1), [ZnL2Cl2] (Zn2), [HgL2Cl2] (Hg2), [ZnL3Cl2] (Zn3), and [HgL3Cl2] (Hg3) have been synthesized under solvothermal conditions. The structures of six complexes have been established by X-ray single-crystal analysis and further physically characterized by EA, FT-IR, (1)H NMR, and ESI-MS. The crystal structures of these complexes indicate that noncovalent interactions, such as hydrogen bonds, C-H···Cl, and π···π stacking, play essential roles in constructing the resulting supramolecular structures (1D for Hg3; 2D for Zn2, Hg2; 3D for Zn1, Hg1, and Zn3). Upon irradiation with UV light, the emission of complexes Zn1-Zn3 and Hg1-Hg3 could be finely tuned from green (480-540 nm) in the solid state to blue (402-425 nm) in acetonitrile solution. It showed that the ligand and metal cation can influence the structures and luminescence properties of complexes such as emission intensities and maximum wavelengths. Since these ligands and complexes could compensate for the absorption of N719 in the low-wavelength region of the visible spectrum and reduce charge recombination of the injected electron, the ligands L1-L3 and complexes Zn3/Hg3 were employed to prepare cosensitized dye-sensitized solar cells devices for investigating the influences of the electron-donating group and coordination on the DSSCs performance. Compared to DSSCs only being sensitized by N719, these prepared ligands and complexes chosen to cosensitize N719 in solar cell do enhanced its performance by 11-41%. In particular, a DSSC using L3 as cosensitizer displays better photovoltaic performance with a short circuit current density of 18.18 mA cm(-2), corresponding to a conversion efficiency of 7.25%. It is much higher than that for DSSCs only sensitized by N719 (5.14%).