Microalgae Harvesting by Self-Driven 3D Microfiltration with Rationally Designed Porous Superabsorbent Polymer (PSAP) Beads

Microalgae are emerging as next-generation renewable resources for production of sustainable biofuels and high-value bioproducts. Conventional microalgae harvesting methods including centrifugation, filtration, flocculation, and flotation are limited by intensive energy consumption, high capital cost, long treatment time, or the requirement of chemical addition. In this study, we design and fabricate porous superabsorbent polymer (PSAP) beads for self-driven 3D microfiltration of microalgal cultures. The PSAP beads can swell fast in a microalgal suspension with high water absorption capacity. During this process, microalgal cells are excluded outside the beads and successfully concentrated in the residual medium. After treatment, the beads can be easily separated from the microalgal concentrate and reused after dewatering. In one PSAP treatment, a high concentration factor for microalgal cultures up to 13 times can be achieved in 30 min with a harvesting efficiency higher than 90%. Furthermore, microalgal cultures could be concentrated from 0.2 g L^-1 to higher than 120 g L^-1 with minimal biomass loss through multistage PSAP treatments. Therefore, the use of PSAP beads for microalgae harvesting is fast, effective, and scalable. It does not require any complex instrument or chemical addition. This technique potentially provides an efficient and feasible alternative to obtain high concentrations of functional biomass at a very low cost.

The Role of Biosynthesized Silver Nanoparticles in Antimicrobial Mechanisms

Nanotechnology is an area of science in which new materials are developed. The correlation between nanotechnology and microbiology is essential for the development of new drugs and vaccines. The main advantage of combining these areas is to associate the latest technology in order to obtain new ways for solving problems related to microorganisms. This review seeks to investigate nanoparticle formation's antimicrobial properties, primarily when connected to the green synthesis of silver nanoparticles. The development of new sustainable methods for nanoparticle production has been instrumental in designing alternative, non-toxic, energy-friendly, and environmentally friendly routes. In this sense, it is necessary to study silver nanoparticles' green synthesis concerning their antimicrobial properties. Antimicrobial silver nanoparticles' mechanisms demonstrate efficiency to gram-positive bacteria, gram-negative bacteria, fungi, viruses, and parasites. However, attention is needed with the emergence of resistance to these antimicrobials. This article seeks to relate the parameters of green silver- based nanosystems with the efficiency of antimicrobial activity.

Silver Nanoparticles (AgNPs) Biosynthesized by Aspergillus flavus KF946095; their Characterization and Antibacterial Activity

The antimicrobial agents of silver nanoparticles (AgNPs) have been applied a little while back in diverse therapeutic studies. In this analysis, AgNPs were biosynthesized using an ecologically welcomed and cost-effective simple of bio-reduction. An isolate of Aspergillus flavus KF946095 (A. flavus) was found to biosynthesize AgNPs; the size of AgNPs was (56nm) and detected by UV-Vis analysis at (400 nm). The reducing properties for biosynthesis of AgNPs are mainly due to the protein functional surface reactive groups detected by Fourier Transform Infrared spectroscopy (FTIR).Whereas, FTIR for AgNPs showed different peaks at 3994.5, 3201.6, 1801.4, 1643.2 and 1604.7 cm-1 that shared with the biosynthesize and stability of AgNPs as protein capping agents. Transmission Electron Microscope (TEM) confirmed the scattering of biosynthesized AgNPs within a sol with oval and round shapes. The antibiotic susceptibility test was studied for some pathogenic bacteria. Staphylococcus aureus DSM 1104 (S. aureus) appeared to be the more resistant strain; it resisted the action of 6 antibiotics out of 8 ones tested. MIC value of AgNPs was 20µg/mL and antibiotic ciprofloxacin was 30µg/mL. Mixture of MIC values or double MIC values distinctively inhibited the multidrug resistant (MDR) S.aureus.

Silver Nanowire-Modified Filter with Controllable Silver Ion Release for Point-of-Use Disinfection

Waterborne diseases related to unsafe water are still major threats to public health in some developing countries and rural areas. Providing affordable and safe drinking water globally remains a great challenge in the coming decades. In this study, we develop a high-throughput and conductive silver nanowire (AgNW)-modified composite filter via depositing thin and ultralong AgNWs on a macroporous substrate. An electrochemical filtration cell (EFC) equipped with the composite filter achieves controllable Ag⁺ release at a μg L^-1 level and superior bacterial inactivation performance (>6-log inactivation efficiency) with an operation voltage of only 1 V at a high flux of 100 m³ h^-1 m^-2. Under such operation conditions, each composite filter (effective area: 0.79 cm²) can treat at least 750 mL of the bacterial suspension (∼10⁷ CFU mL^-1 of Escherichia coli) with a low effluent Ag⁺ concentration below 50 μg L^-1 and almost negligible energy consumption of only ∼70 J m^-3.

ZnO-pHEMA Nanocomposites: An Ecofriendly and Reusable Material for Water Remediation

The design of new hybrid nanocomposites based on poly(2-hydroxyethylmethacrylate) (pHEMA) graphene oxide (GO) cryosponges, wherein ZnO nanolayers have been deposited to induce photocatalytic properties, is reported here. Atomic layer deposition at low temperature is specifically selected as the deposition technique to stably anchor ZnO molecules to the pendant polymer OH groups. Furthermore, to boost the pHEMA cryogel adsorption capability versus organic dyes, GO is added during the synthetic procedure. The morphology, the crystallinity, and the chemical composition of the samples are deeply investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction analyses, Fourier transform infrared spectroscopy, and thermogravimetric analysis. Swelling properties, mechanical performance, and adsorption kinetics models of the hybrid materials are also evaluated. Finally, the adsorption and photocatalytic performance are tested and compared for all of the samples using methylene blue as a dye. Particularly, the adsorption efficiency of ZnO/pHEMA and ZnO/pHEMA-GO nanocomposites, as well as their in situ regeneration via photocatalysis, renders such devices very appealing for advanced wastewater treatment technology.

Biosynthesis of copper nanoparticles using Shewanella loihica PV-4 with antibacterial activity: Novel approach and mechanisms investigation

Metallic nanoparticle based disinfection represents a promising approach for microbial pollution control in drinking water and thus, biosynthesis of non precious metal nanoparticles is of considerable interest. Herein, an original and efficient route for directly microbial synthesis of copper nanoparticles (Cu-NPs) by Shewanella loihica PV-4 is described and their satisfactorily antimicrobial activities are established. Cu-NPs were successfully synthesized and most of them attaching on the bacterial cell surfaces suggested extracellular Cu(II) bioreduction mainly contributed to this biosynthesis. Using a suite of characterization methods, polycrystalline nature and face centered cubic lattice of Cu-NPs were revealed, with size in the range of 10-16 nm. With Cu-NPs dosage of 100 μg/mL and 10⁵ CFU/mL fresh Escherichia coli suspension, the obtained antibacterial efficiency reached as high as 86.3 ± 0.2% within 12 h. Cell damages were primarily caused by the generated reactive oxygen species with H₂O₂ playing significant roles. Both cell membrane and cytoplasm components were destroyed, while the key inactivation mechanisms were lipid peroxidation and DNA damage as concluded through correlation analysis. The cost-effective and eco-friendly biosynthesis of Cu-NPs with high antibacterial activities make them particularly attractive for drinking water disinfection.

3D-macroporous chitosan-based scaffolds with in situ formed Pd and Pt nanoparticles for nitrophenol reduction

3D-macroporous chitosan-based scaffolds (cryogels) were produced via growth of metal-polymer coordinated complexes and electrostatic interactions between oppositely charged groups of chitosan and metal ions under subzero temperatures. A mechanism of reduction of noble metal complexes inside the cryogel walls by glutaraldehyde is proposed, which produces discrete and dispersed noble metal nanoparticles. 3D-macroporous scaffolds prepared under different conditions were characterised using TGA, FTIR, nitrogen adsorption, SEM, EDX and TEM, and the distribution of platinum nanoparticles (PtNPs) and palladium nanoparticles (PdNPs) in the material assessed. The catalytic activity of the in situ synthesised PdNPs, at 2.6, 12.5 and 21.0 μg total mass, respectively, was studied utilising a model system of 4-nitrophenol reduction. The kinetics of the reaction under different conditions (temperature, concentration of catalyst) were examined, and a decrease of catalytic activity was not observed over 17 treatment cycles. Increasing the temperature of the catalytic reaction from 10 to 22 and 35 °C by PdNPs supported within the cryogel increased the kinetic rate by 44 and 126%, respectively. Turnover number and turnover frequency of the PdNPs catalysts at room temperature were in the range 0.20-0.53 h^-1. The conversion degree of 4-nitrophenol at room temperature reached 98.9% (21.0 μg PdNPs). Significantly less mass of palladium nanoparticles (by 30-40 times) was needed compared to published data to obtain comparable rates of reduction of 4-nitrophenol.

Facile preparation of silver nanoparticle decorated chitosan cryogels for point-of-use water disinfection

In this study, silver nanoparticle decorated chitosan (CS/Ag NP) cryogels were fabricated through a simple freeze-drying process for point-of-use (POU) water disinfection. The CS/Ag NP cryogels showed high porosity, good mechanical properties, an excellent water absorption capability, and most importantly, an efficient bactericidal feature. The absorption capacity for water was found to be 47g/g, approximately 90% of which was recovered by simple squeezing. Three different sizes of Ag NPs were compared regarding their bactericidal capability against both Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis). Under optimum conditions, a 3 log reduction of bacteria was observed by holding the bacteria suspension (10⁸ colony forming units (cfu)/mL) in the cryogels for 5min. Reduction was further increased to a 4 log when the contact time was doubled. The silver content in the cryogels was found to only be 7.5mg/g. Furthermore, the total Ag in processed water was found to only be 22μg/L, half of the safety limit set by China (<50μg/L). The bactericidal effectiveness of the material for real surface water samples was also demonstrated by treating water samples with different water quality matrices, including lake water and sewage water samples. In all three treated lake water samples, both the total bacteria and E. coli met the regulations for drinking water in China (<100cfu/mL for total bacteria and negative for E. coli). CS/Ag NP cryogels can be used for drinking water disinfection during disaster relief and in contingency water supply applications.

Biosynthesis of silver nanoparticles by Novosphingobium sp. THG-C3 and their antimicrobial potential

The present study described biosynthesis of silver nanoparticles (AgNPs) using a bacterial strain Novosphingobium sp. THG-C3, isolated from soil, and their application in antibacterial activity. The maximum absorbance values of the synthesized AgNPs was measured at 406 nm in ultraviolet-visible spectrophotometry and were mostly spherical in shape with particle size in range of 8-25 nm by field emission transmission electron microscopy analysis. X-ray diffraction pattern corresponding to planes (111), (200), (220), and (311) demonstrated the crystalline nature of the AgNPs. The synthesized AgNPs exhibited antimicrobial activity against various pathogens inculding Staphylococcus aureus, Candida tropicalis, Pseudomonas aeruginosa, Escherichia coli, Vibrio parahaemolyticus, Candida albicans, Salmonella enterica, Bacillus subtilis, and Bacillus cereus. In addition, the AgNPs in combination with commercial antibiotics enhanced antimicrobial activity against P. aeruginosa, S. enterica, E. coli, and V. parahaemolyticus. The AgNPs synthesized by strain Novosphingobium sp. THG-C3 are comparatively simple, green, cost-effective, and may serve as a potential antimicrobial agent.

Facile Algae-Derived Route to Biogenic Silver Nanoparticles: Synthesis, Antibacterial, and Photocatalytic Properties

Biogenic synthesis of metal nanoparticles is of considerable interest, as it affords clean, biocompatible, nontoxic, and cost-effective fabrication. Driven by their ability to withstand variable extremes of environmental conditions, several microorganisms, notably bacteria and fungi, have been investigated in the never-ending search for optimal nanomaterial production platforms. Here, we present a hitherto unexplored algal platform featuring Chlorella pyrenoidosa, which offers a high degree of consistency in morphology of synthesized silver nanoparticles. Using a suite of characterization methods, we reveal the intrinsic crystallinity of the algae-derived nanoparticles and the functional moieties associated with its surface stabilization. Significantly, we demonstrate the antibacterial and photocatalytic properties of these silver nanoparticles and discuss the potential mechanisms that drive these critical processes. The blend of photocatalytic and antibacterial properties coupled with their intrinsic biocompatibility and eco-friendliness make these nanoparticles particularly attractive for wastewater treatment.