Signal-On Detection of Caspase-3 with Methylene Blue-Loaded Metal-Organic Frameworks as Signal Reporters

In this work, we report on an electrochemical method for the signal-on detection of caspase-3 and the evaluation of apoptosis based on the biotinylation reaction and the signal amplification of methylene blue (MB)-loaded metal-organic frameworks (MOFs). Zr-based UiO-66-NH2 MOFs were used as the nanocarriers to load electroactive MB molecules. Recombinant hexahistidine (His6)-tagged streptavidin (rSA) was attached to the MOFs through the coordination interaction between the His6 tag in rSA and the metal ions on the surface of the MOFs. The acetylated peptide substrate Ac-GDEVDGGGPPPPC was immobilized on the gold electrode. In the presence of caspase-3, the peptide was specifically cleaved, leading to the release of the Ac-GDEVD sequence. A N-terminal amine group was generated and then biotinylated in the presence of biotin-NHS. Based on the strong interaction between rSA and biotin, rSA@MOF@MB was captured by the biotinylated peptide-modified electrode, producing a significantly amplified electrochemical signal. Caspase-3 was sensitively determined with a linear range from 0.1 to 25 pg/mL and a limit of detection down to 0.04 pg/mL. Further, the active caspase-3 in apoptosis inducer-treated HeLa cells was further quantified by this method. The proposed signal-on biosensor is compatible with the complex biological samples and shows great potential for apoptosis-related diagnosis and the screening of caspase-targeting drugs.

A comprehensive review on nanocomposite biomaterials based on gelatin for bone tissue engineering

The creation of a suitable scaffold is a crucial step in the process of bone tissue engineering (BTE). The scaffold, acting as an artificial extracellular matrix, plays a significant role in determining the fate of cells by affecting their proliferation and differentiation in BTE. Therefore, careful consideration should be given to the fabrication approach and materials used for scaffold preparation. Natural polypeptides such as gelatin and collagen have been widely used for this purpose. The unique properties of nanoparticles, which vary depending on their size, charge, and physicochemical properties, have demonstrated potential in solving various challenges encountered in BTE. Therefore, nanocomposite biomaterials consisting of polymers and nanoparticles have been extensively used for BTE. Gelatin has also been utilized in combination with other nanomaterials to apply for this purpose. Composites of gelatin with various types of nanoparticles are particularly promising for creating scaffolds with superior biological and physicochemical properties. This review explores the use of nanocomposite biomaterials based on gelatin and various types of nanoparticles together for applications in bone tissue engineering.

EPR-based in situ enzymatic activity detection of endogenous caspase-3 in apoptosis cell lysates

Caspase-3 plays a vital role in cell apoptosis and related diseases. The detection and characterization of endogenous active caspase-3 are of immense value not only for mechanism studies of apoptosis but also for the diagnosis and treatment of apoptosis-related diseases. Here, an electron paramagnetic resonance (EPR)-based enzymatic assay was developed for the detection of caspase-3 activity both in vitro and in apoptosis cells. This assay uses a sandwich-like probe composed of a caspase-3-specific peptide segment (DEVD) conjugated to an EPR-detectable nitroxide spin label and magnetic beads (MBs). Cleavage of the "Nitroxide-Peptide-MBs" sandwich probe caspase-3 will release the nitroxide, which is readily detected by EPR after magnetic separation, resulting in a distinct EPR "off/on" transition. This assay takes advantage of the specific cleavage of DEVD-containing peptides by caspase-3 for high specificity, magnetic beads for fast magnetic separation, and EPR spectroscopy for considerably high detection sensitivity (LODs for caspase-3 are 116 nM at 60 min and 58 nM at 120 min). Importantly, the assay was proven to be compatible with complex biological samples and can detect the endogenous active caspase-3, thereby providing potential applications in the screening of protease-targeted drugs and the diagnosis of protease-associated diseases.

Photothermal effect of albumin-modified gold nanorods diminished neuroblastoma cancer stem cells dynamic growth by modulating autophagy

Here, we investigated the photothermal effect of gold nanorods (GNRs) on human neuroblastoma CD133⁺ cancer stem cells (CSCs) via autophagic cell death. GNRs were synthesized using Cetyltrimethylammonium bromide (CTAB), covered with bovine serum albumin (BSA). CD133⁺ CSCs were enriched from human neuroblastoma using the magnetic-activated cell sorting (MACS) technique. Cells were incubated with GNRs coated with BSA and exposed to 808-nm near-infrared laser irradiation for 8 min to yield low (43 °C), medium (46 °C), and high (49 °C) temperatures. After 24 h, the survival rate and the percent of apoptotic and necrotic CSCs were measured using MTT assay and flow cytometry. The expression of different autophagy-related genes was measured using polymerase chain reaction (PCR) array analysis. Protein levels of P62 and LC3 were detected using an enzyme-linked immunosorbent assay (ELISA). The viability of CSC was reduced in GNR-exposed cells compared to the control group (p < 0.05). At higher temperatures (49 °C), the percent of apoptotic CSCs, but not necrotic cells, increased compared to the lower temperatures. Levels of intracellular LC3 and P62 were reduced and increased respectively when the temperature increased to 49 °C (p < 0.05). These effects were non-significant at low and medium temperatures (43 and 46 °C) related to the control CSCs (p > 0.05). The clonogenic capacity of CSC was also inhibited after photothermal therapy (p < 0.05). Despite these changes, no statistically significant differences were found in terms of CSC colony number at different temperatures regardless of the presence or absence of HCQ. Based on the data, the combination of photothermal therapy with HCQ at 49 °C can significantly abort the CSC clonogenic capacity compared to the control-matched group without HCQ (p < 0.0001). PCR array showed photothermal modulation of CSCs led to alteration of autophagy-related genes and promotion of co-regulator of apoptosis and autophagy signaling pathways. Factors related to autophagic vacuole formation and intracellular transport were significantly induced at a temperature of 49 °C (p < 0.05). We also note the expression of common genes belonging to autophagy and apoptosis signaling pathways at higher temperatures. Data showed tumoricidal effects of laser-irradiated GNRs by the alteration of autophagic response and apoptosis.

Early stage evaluation of colon cancer using tungsten disulfide quantum dots and bacteriophage nano-biocomposite as an efficient electrochemical platform

Background

Recently, biosensors have become popular analytical tools for small analytes due to their high sensitivity and wide analytical range. In the present work, development of a novel biosensing method based on tungsten disulfide quantum dots (WS2 QDs)-Au for rapidly and selectively detecting c-Met protein is introduced. As a proof of concept, M13 bacteriophage-based biosensors were used for the electrochemical detection of c-Met protein as a colon cancer biomarker.

Method

The M13 bacteriophage (virus), as the biorecognition element, was immobilized on glassy carbon electrodes which were modified by WS2 QDs-functionalized gold nanoparticles. The stepwise presence of the WS2 QDs, gold nanoparticles, and immobilized phage on glassy carbon electrodes were confirmed by scanning electron microscope (SEM) and square wave voltammetry (SWV) technique.

Results

The designed biosensor was applied to measure the amount of c-Met protein in standard solutions, and consequently the desirable detection limit of 1 pg was obtained. Finally, as a proof of concept, the developed platform was used for the evaluation of c-Met protein in serum samples of colon cancer-suffering patients and the results were compared with the results of the common Elisa kit.

Conclusions

As an interesting part of this study, some concentrations of the c-Met protein in colon cancer serum samples which could not be determined by Elisa, were easily analyzed by the developed bioassay system. The developed bioassay system has great potential to application in biomedical laboratories.

Graphical Abstract

Peptide-Derived Biosensors and Their Applications in Tumor Immunology-Related Detection

Small-molecular targeting peptides possess features of biocompatibility, affinity, and specificity, which is widely applied in molecular recognition and detection. Moreover, peptides can be developed into highly ordered supramolecular assemblies with boosting binding affinities, diverse functions, and enhanced stabilities suitable for biosensors construction. In this Review, we summarize recent progress of peptide-based biosensors for precise detection, especially on tumor-related analysis, as well as further provide a brief overview of the progress in tumor immune-related detection. Also, we are looking forward to the prospective future of peptide-based biosensors.

Surface Plasmon Resonance for Protease Detection by Integration of Homogeneous Reaction

The heterogeneous assays of proteases usually require the immobilization of peptide substrates on the solid surface for enzymatic hydrolysis reactions. However, immobilization of peptides on the solid surface may cause a steric hindrance to prevent the interaction between the substrate and the active center of protease, thus limiting the enzymatic cleavage of the peptide. In this work, we reported a heterogeneous surface plasmon resonance (SPR) method for protease detection by integration of homogeneous reaction. The sensitivity was enhanced by the signal amplification of streptavidin (SA)-conjugated immunoglobulin G (SA-IgG). Caspase-3 (Cas-3) was determined as the model. A peptide labeled with two biotin tags at the N- and C-terminals (bio-GDEVDGK-bio) was used as the substrate. In the absence of Cas-3, the substrate peptide was captured by neutravidin (NA)-covered SPR chip to facilitate the attachment of SA-IgG by the avidin-biotin interaction. However, once the peptide substrate was digested by Cas-3 in the aqueous phase, the products of bio-GDEVD and GK-bio would compete with the substrate to bond NA on the chip surface, thus limiting the attachment of SA-IgG. The method integrated the advantages of both heterogeneous and homogeneous assays and has been used to determine Cas-3 inhibitor and evaluate cell apoptosis with satisfactory results.

Necessity of regulatory guidelines for the development of amyloid based biomaterials

Amyloid diseases are caused due to protein homeostasis failure where incorrectly folded proteins/peptides form cross-β-sheet rich amyloid fibrillar structures. Besides proteins/peptides, small metabolite assemblies also exhibit amyloid-like features. These structures are linked to several human and animal diseases. In addition, non-toxic amyloids with diverse physiological roles are characterized as a new functional class. This finding, along with the unique properties of amyloid like stability and mechanical strength, led to a surge in the development of amyloid-based biomaterials. However, the usage of these materials by humans and animals may pose a health risk such as the development of amyloid diseases and toxicity. This is possible because amyloid-based biomaterials and their fragments may assist seeding and cross-seeding mechanisms of amyloid formation in the body. This review summarizes the potential uses of amyloids as biomaterials, the concerns regarding their usage, and a prescribed workflow to initiate a regulatory approach.

Emerging trends of receptor-mediated tumor targeting peptides: A review with perspective from molecular imaging modalities

Natural peptides extracted from natural components such are known to have a relatively short in-vivo half-life and can readily metabolize by endo- and exo-peptidases. Fortunately, synthetic peptides can be easily manipulated to increase in-vivo stability, membrane permeability and target specificity with some well-known natural families. Many natural as well as synthetic peptides target to their endogenous receptors for diagnosis and therapeutic applications. In order to detect these peptides externally, they must be modified with radionuclides compatible with single photon emission computed tomography (SPECT) or positron emission tomography (PET). Although, these techniques mainly rely on physiological changes and have profound diagnostic strength over anatomical modalities such as MRI and CT. However, both SPECT and PET observed to possess lack of anatomical reference frame which is a key weakness of these techniques, and unfortunately, cannot be available freely in most clinical centres especially in under-developing countries. Hence, it is need of the time to design and develop economic, patient friendly and versatile strategies to grapple with existing problems without any hazardous side effects. Optical molecular imaging (OMI) has emerged as a novel technique in field of medical science using fluorescent probes as imaging modality and has ability to couple with organic drugs, small molecules, chemotherapeutics, DNA, RNA, anticancer peptide and protein without adding chelators as necessary for radionuclides. Furthermore, this review focuses on difference in imaging modalities and provides ample knowledge about reliable, economic and patient friendly optical imaging technique rather radionuclide-based imaging techniques.

Protease Biosensor by Conversion of a Homogeneous Assay into a Surface-Tethered Electrochemical Analysis Based on Streptavidin-Biotin Interactions

This work proposed a new sensing strategy for protease detection by converting a homogeneous assay into a surface-tethered electrochemical analysis. Streptavidin (SA), a tetramer protein, was used as the sensing unit based on the SA-biotin coupling chemistry. Caspase-3 was used as the model analyte, and a biotinylated peptide with a sequence of biotin-GDEVDGK-biotin was designed as the substrate. Specifically, the peptide substrate could induce an assembly of SA to form (SA-biotin-GDEVDGK-biotin)_n aggregates through SA-biotin interactions, which was confirmed by atomic force microscopy (AFM). The peptide substrate-induced assembly of SA was facilely initiated on an electrode-liquid surface by modification of the electrode with SA. The in situ formation of (SA-biotin-GDEVDGK-biotin)_n aggregates created an insulating layer, thus limiting the electron transfer of ferricyanide. Once the peptide substrate was cleaved into two shorter fragments (biotin-GDEVD and GK-biotin) by caspase-3, the resulting products would compete with biotin-GDEVDGK-biotin to bind SA proteins immobilized on the electrode surface and distributed in a solution, thus preventing the in situ formation of (SA-biotin-GDEVDGK-biotin)_n assemblies. With the simple principle of the substrate-induced assembly of SA, a dual-signal amplification was achieved with improved sensitivity. Taking advantage of high sensitivity, simple principle, and easy operation, this method can be augmented to design various surface-tethered biosensors for practical applications.

Electrochemical determination of caspase-3 using signal amplification by HeLa cells modified with silver nanoparticles

An electrochemical sensor capable of quantitative determination of caspase-3 activities was developed. A thiolated peptide whose sequence contained a caspase-3 cleaved site and a cell penetration sequence was preimmobilized onto an electrode. The quantification of caspase-3 was accomplished after cell penetration and the subsequent adsorption of silver nanoparticles (AgNPs). The oxidation current of AgNPs was found to be inversely proportional to the concentration of caspase-3 between 0.02 and 0.2 U/mL. A detection limit of 0.02 U/mL for caspase-3 was achieved due to the large number of positively charged AgNPs adsorbed onto the negatively charged cells. The proof of concept was demonstrated by monitoring the cleavage of surface-confined peptide substrates by caspase-3 in cell lysates. The current sensor could be extended to detect cells by replacing the surface-confined peptide with aptamers that recognize cells. Thus, the use of a cell as a matrix for AgNPs shows excellent potential for constructing electrochemical sensors and provides a useful alternative for sensor development in the future. Cells modified with silver nanoparticles were utilized as the electrochemical readout of an electrochemical assay.

Peptide-based electrochemical biosensors utilized for protein detection

Proteins are generally detected as biomarkers for tracing or determining various disorders in organisms. Biomarker proteins can be tracked in samples with various origins and in different concentrations, revealing whether an organism is in a healthy or unhealthy state. In regard to detection, electrochemical biosensors are a potential fusion of electronics, chemistry, and biology, allowing for fast and early point-of-care detection from a biological sample with the advantages of high sensitivity, simple construction, and easy operation. Peptides present a promising approach as a biorecognition element when connected with electrochemical biosensors. The benefits of short peptides lie mainly in their good stability and selective affinity to a target analyte. Therefore, peptide-based electrochemical biosensors (PBEBs) represent an alternative approach for the detection of different protein biomarkers. This review provides a summary of the past decade of recently proposed PBEBs designed for protein detection, dividing them according to different protein types: (i) enzyme detection, including proteases and kinases; (ii) antibody detection; and (iii) other protein detection. According to these protein types, different sensing mechanisms are discussed, such as the peptide cleavage by a proteases, phosphorylation by kinases, presence of antibodies, and exploiting of affinities; furthermore, measurements are obtained by different electrochemical methods. A discussion and comparison of various constructions, modifications, immobilization strategies and different sensing techniques in terms of high sensitivity, selectivity, repeatability, and potential for practical application are presented.

Highly sensitive detection of caspase-3 activity based on peptide-modified organic electrochemical transistor biosensors

Caspase-3 is an important proteolytic enzyme that cleaves several key substrates in apoptotic processes, resulting in DNA fragmentation, the degradation of nuclear proteins, and the formation of apoptotic bodies. However, it is challenging to detect caspase-3 due to its low expression levels in cells. In this work, organic electrochemical transistors (OECTs) are used in the detection of caspase-3 for the first time. A self-assembled monolayer of the peptide is bonded to the Au gate electrode (GE) of an OECT via gold-sulphur bonds. It is found that the transfer curve of the transistor shifts to a lower gate voltage due to the modulation of the surface potential of the GE by the peptides. Then, the device is used in the detection of caspase-3 in aqueous solutions and shows a detection limit of 0.1 pM. Due to its high sensitivity, the device can detect caspase-3 in induced apoptotic HeLa cells. The system is low-cost, conveniently used and applicable for biological and medical monitoring where caspase-3 detection and quantification are required.

Investigation of the Hydration State of Self-Assembled Peptide Nanostructures with Advanced Electron Paramagnetic Resonance Spectroscopy

Probing the intermolecular interactions and local environments of self-assembled peptide nanostructures (SPNs) is crucial for a better understanding of the underlying molecular details of self-assembling phenomena. In particular, investigation of the hydration state is important to understand the nanoscale structural and functional characteristics of SPNs. In this report, we examined the local hydration environments of SPNs in detail to understand the driving force of the discrete geometric structural self-assembling phenomena for peptide nanostructures. Advanced electron paramagnetic resonance spectroscopy was used to probe the hydrogen bond formation and geometry as well as the hydrophobicity of the local environments at various spin-labeled sites in SPNs. The experimental results supplement the sparse experimental data regarding local structures of SPNs, such as the hydrogen bonding and the hydrophobicity of the local environment, providing important information on the formation of SPNs, which have immense potential for bioactive materials.

Advances in nanomaterial based optical biosensing and bioimaging of apoptosis via caspase-3 activity: a review

Caspase-3 plays a vital role in intrinsic and extrinsic pathways of programed cell death and in cell proliferation. Its detection is an important tool for early detection of some cancers and apoptosis-related diseases, and for monitoring the efficacy of pharmaceuticals and of chemo- and radiotherapy of cancers. This review (with 72 references) summarizes nanomaterial based methods for signal amplification in optical methods for the determination of caspase-3 activity. Following an introduction into the field, a first large section covers optical assays, with subsections on luminescent and chemiluminescence, fluorometric (including FRET based), and colorimetric assays. Further section summarize methods for bioimaging of caspase-3. A concluding section covers current challenges and future perspectives. Graphical Abstract ᅟ.

A highly sensitive and reliable detection of CA15-3 in patient plasma with electrochemical biosensor labeled with magnetic beads

An early on-time detection of breast cancer can effectively affect the outcome of the treatment. Here, we developed an ultrasensitive, simple and reliable immunosensor to detect the lowest alteration of CA 15-3, the standard biomarker of breast cancer patients. The proposed immunosensor was achieved by modification of gold electrode by streptavidin to immobilize the biotinylated anti-CA 15-3 monoclonal antibody (mAb). Bovine serum albumin was used to prevent nonspecific binding. To improve the sensitivity of modified immunosensor, the sandwich signal enhancer consisting of streptavidin-coated magnetic beads conjugated with biotinylated horseradish peroxidase (HRP) and anti-CA 15-3 biotinylated mAb was applied. The electrochemical measurements were obtained in the presence of hydroquinone as a redox agent and H₂O₂ as the activating agent of HRP. Under optimized condition and using square wave voltammetry, the lower limit of quantification was obtained as 15 × 10^-6 U/mL and the linear CA 15-3 concentration range was 50-15 × 10^-6 U/mL. While showing significant stability, the immunosensor displayed an excellent sensitivity and specificity for the detection of CA 15-3 even in the human serum as compared to the enzyme-linked immunosorbent assay (ELISA) as a gold standard method. Based on our findings, the engineered immunosensor is proposed as a robust diagnostic tool for the clinical determination of CA 15-3 and other cancer biomarkers.

Recent advances in aptamer-armed multimodal theranostic nanosystems for imaging and targeted therapy of cancer

The side effects of chemotherapeutics during the course of cancer treatment limit their clinical outcomes. The most important mission of the modern cancer therapy modalities is the delivery of anticancer drugs specifically to the target cells/tissue in order to avoid/reduce any inadvertent non-specific impacts on the healthy normal cells. Nanocarriers decorated with a designated targeting ligand such as aptamers (Aps) and antibodies (Abs) are able to deliver cargo molecules to the target cells/tissue without affecting other neighboring cells, resulting in an improved treatment of cancer. For targeted therapy of cancer, different ligands (e.g., protein, peptide, Abs, Aps and small molecules) have widely been used in the development of different targeting drug delivery systems (DDSs). Of these homing agents, nucleic acid Aps show unique targeting potential with high binding affinity to a variety of biological targets (e.g., genes, peptides, proteins, and even cells and organs). Aps have widely been used as the targeting agent, in large part due to their unique 3D structure, simplicity in synthesis and functionalization, high chemical flexibility, low immunogenicity and toxicity, and cell/tissue penetration capability in some cases. Here, in this review, we provide important insights on Ap-decorated multimodal nanosystems (NSs) and discuss their applications in targeted therapy and imaging of cancer.

Peptide-fluorophore/AuNP conjugate-based two-photon excited fluorescent nanosensor for caspase-3 activity imaging assay in living cells and tissue

In the present study, a novel fluorescence resonance energy transfer (FRET) strategy-based two-photon excited nanosensor via the assembly of two-photon dye-labeled peptides on the gold nanoparticle's surface has been developed and successfully applied in the caspase-3 imaging assay in living cells and ischemia-reperfusion surgery-treated rat liver tissue slices.

Quantum dots-based fluorescence resonance energy transfer biosensor for monitoring cell apoptosis

The development of advanced methods for accurately monitoring cell apoptosis has extensive significance in the diagnostic and pharmaceutical fields. In this study, we developed a rapid, sensitive and selective approach for the detection of cell apoptosis by combining the site-specific recognition and cleavage of the DEVD-peptide with quantum dots (QDs)-based fluorescence resonance energy transfer (FRET). Firstly, biotin-peptide was conjugated on the surface of AuNPs to form AuNPs-pep through the formation of an Au-S bond. Then, AuNPs-pep-QDs nanoprobe was obtained through the connection between AuNPs-pep and QDs. FRET is on and the fluorescence of QDs is quenched at this point. The evidence of UV-vis spectra, transmission electron microscopy (TEM), and Fourier transform infrared (FT-IR) spectroscopy revealed that the connection was successful. Upon the addition of apoptosis cell lysis solution, peptide was cleaved by caspase-3, and AuNPs was dissociated from the QDs. At this time, FRET is off, and thus the QDs fluorescence was recovered. The experimental conditions were optimized in terms of ratio of peptide to AuNPs, buffer solution, and the temperature of conjugation and enzyme reaction. The biosensor was successfully applied to distinguishing apoptosis cells and normal cells within 2 h. This study demonstrated that the biosensor could be utilized to evaluate anticancer drugs.

The Chemical Deposition Method for the Decoration of Palladium Particles on Carbon Nanofibers with Rapid Conductivity Changes

Palladium (Pd) metal is well-known for hydrogen sensing material due to its high sensitivity and selectivity toward hydrogen, and is able to detect hydrogen at near room temperature. In this work, palladium-doped carbon nanofibers (Pd/CNFs) were successfully produced in a facile manner via electrospinning. Well-organized and uniformly distributed Pd was observed in microscopic images of the resultant nanofibers. Hydrogen causes an increment in the volume of Pd due to the ability of hydrogen atoms to occupy the octahedral interstitial positions within its face centered cubic lattice structure, resulting in the resistance transition of Pd/CNFs. The resistance variation was around 400%, and it responded rapidly within 1 min, even in 5% hydrogen atmosphere conditions at room temperature. This fibrous hybrid material platform will open a new and practical route and stimulate further researches on the development of hydrogen sensing materials with rapid response, even to low concentrations of hydrogen in an atmosphere.

Reduced graphene oxide decorated with gold nanoparticle as signal amplification element on ultra-sensitive electrochemiluminescence determination of caspase-3 activity and apoptosis using peptide based biosensor

Introduction: Growing demands for ultrasensitive biosensing have led to the development of numerous signal amplification strategies. In this report, a novel electrochemiluminescence (ECL) method was developed for the detection and determination of caspase-3 activity based on reduced graphene oxide sheets decorated by gold nanoparticles as signal amplification element and horseradish peroxidase enzyme (HRP) as ECL intensity enhancing agent. Methods: The ECL intensity of the luminol was improved by using the streptavidin coated magnetic beads and HRP in the presence of hydrogen peroxide. The cleavage behavior of caspase-3 was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques using biotinylated peptide (DEVD containing peptide) which was coated on reduced graphene oxide decorated with gold nanoparticle. The surface modification of graphene oxide was successfully confirmed by FTIR, UV-vis and x-ray spectroscopy. Results: ECL based biosensor showed that the linear dynamic range (LDR) and the lower limit of quantification (LLOQ) were 0.5-100 and 0.5 femtomolar (fM), respectively. Finally, the performance of the engineered peptide based biosensor was validated in the A549 cell line as real samples. Conclusion: The prepared peptide based biosensor could be considered as an excellent candidate for early detection of apoptosis, cell turnover, and cancer related diseases.