Electrochemical peptide-based biosensor for the detection of the inflammatory disease biomarker, interleukin-1beta

This paper reports the development of a highly sensitive and selective electrochemical peptide-based biosensor for the detection of the inflammatory disease biomarker, interleukin-1beta (IL-1β). To this end, flower-like Au-Ag@MoS2-rGO nanocomposites were used as the signal amplification platform to achieve a label-free biosensor with a high sensitivity and selectivity. First, a high-affinity peptide for IL-1β was identified through biopanning with M13 random peptide libraries, and was newly designed by incorporating cysteine at the C-terminus. An IL-1β specific binding peptide was used as the bio-receptor, and the interaction between the IL-1β binding peptide and IL-1β was confirmed via enzyme-linked immunosorbent assay and various physicochemical and electrochemical analyses. Under optimal conditions, the biosensor achieved an ultrasensitive and specific IL-1β detection in a wide linear concentration range of 0-250 ng/mL with a picomolar-level detection limit (∼2.4 pM), low binding constant (∼0.62 pM), and a low coefficient of variation (<1.65 %). The biosensor was successfully utilized for IL-1β determination in the serum of Crohn's disease patients with a good correlation coefficient. In addition, the detection performance was comparable to that of commercially available IL-1β ELISA kit. This indicates that the electrochemical peptide-based biosensor may offer a potentially valuable platform for the clinical diagnosis of various inflammatory disease biomarkers.

Fabrication and investigation of a pentamerous composite based on calix[4]arene functionalized graphene oxide grafted with silk fibroin, cobalt ferrite, and alginate

This paper presents a new scaffold made from graphene oxide nanosheets, calix[4]arene supramolecules, silk fibroin proteins, cobalt ferrite nanoparticles, and alginate hydrogel (GO-CX[4]/SF/CoFe2O4/Alg). After preparing the composite, we conducted various analyses to examine its structure. These analyses included FTIR, XRD, SEM, EDS, VSM, DLS, and zeta potential tests. Additionally, we performed tests to evaluate the swelling ratio, rheological properties, and compressive mechanical strength of the material. The biological capability of the composite was tested through biocompatiblity, anticancer, hemolysis, antibacterial anti-biofilm assays. Besides, the rheological properties and swelling behaviour of the composite were studied. The results showed that the scaffold is biocompatible with Hu02 cells and the cell viability percentages of 85.23 %, 82.78 %, and 80.18 % for were acquired for 24, 48, and 72 h, respectively. In contrast, the cell viability percentage of BT549 cancer cells were obtained 65.79 %, 60.45 % and 58.16 % for same period which confirmed notable anticancer activity of the product composite. Moreover, a significant antibacterial growth inhibition against E. coli and S. aureus species highlights its potential as an effective antibacterial agent. Furthermore, the observed minimal hemolytic effect (6.56 %) and strong inhibition of P. aeruginosa biofilm formation with a low OD value (0.24) indicate notable hemocompatibility and antibacterial activity.

Reduced graphene oxide/ionic liquid composites with tunable interlayer spacing for improved charge/discharge kinetics in supercapacitors

The large specific surface area and high conductivity of reduced graphene oxide (RGO) make it a promising material for supercapacitors. However, aggregation of graphene sheets into graphitic domains upon drying hampers supercapacitor performance by drastically impeding ion transport inside electrodes. Here, we present a facile approach to optimize charge storage performance in RGO-based supercapacitors by systematically tuning their micropore structure. To this end, we combine RGOs with room temperature ionic liquids during electrode processing to impede stacking of sheets into graphitic structures with small interlayer distance. In this process, RGO sheets function as the active electrode material while ionic liquid serves both as a charge carrier and a spacer to control interlayer spacing inside electrodes and form ion transport channels. We show that composite RGO/ionic liquid electrodes with larger interlayer spacing and more ordered structure exhibit improved capacitance and charging kinetics.

Reduced graphene oxide doped tellurium nanotubes for high performance supercapacitor

Supercapacitors have been achieving great interest in energy storage systems for the past couple of decades. Such devices with superior performance, mainly, depending on the material architecture of the electrodes. We report on the preparation of Tellurium nanotubes (Te-tubes diameter ∼100 nm and length ∼700 nm), with variable doping of conducting network reduced graphene oxide (rGO) to fabricate high-performance electrode characteristics of rGO @ Te. The prepared material was characterized using XRD, FTIR, FESEM, and Raman spectroscopy techniques, including Brunauer-Emmett-Teller, Barrett-Joyner-Halenda measurements. FTIR study revealed that 15% rGO @ Te has a wide C-O vibration band at ∼ 1,100–1,300 cm⁻¹, over other compositions. FESEM study shows the Te-tubes dispersion in rGO layers. The EDX study revealed that 15% of the composition has an optimistic concentration of C and O elements. In other compositions, either at lower/higher rGO concentration, an uneven count of C and O is observed. These support efficient charge dynamics to achieve superior ultra-capacitor characteristics, thereby achieving specific capacitance C_sp 170 + F/g @ 10 mV/s in a symmetric configuration. The reported values are thirty times higher than pristine Te-tubes (∼5 F/g). This finding suggests that rGO @ Te is a promising candidate for supercapacitor.

Novel TiO2/GO-Al2O3 Hollow Fiber Nanofiltration Membrane for Desalination and Lignin Recovery

Due to its greater physical-chemical stability, ceramic nanofiltration (NF) membranes were used in a number of industrial applications. In this study, a novel NF membrane was prepared by co-depositing a titanium dioxide (TiO₂) and graphene oxide (GO) composite layer directly onto a porous α-Al₂O₃ hollow fiber (HF) support. An 8 µm-thick TiO₂/GO layer was deposited to the surface of α-Al2O3 HF support by vacuum deposition method to produce advanced TiO₂/GO-Al₂O₃ HF NF membrane. Scanning electron microscope (SEM) micrographs, energy dispersive spectrometer (EDS), X-ray powder diffraction (XRD), thermogravimetric analyzer (TGA), porosity, 3-point bending strength, zeta potential analysis, and hydrophilic properties by water contact angle are used for TiO₂/GO-Al₂O₃ HF NF membrane characterization. The results show that the developed membrane's MWCO ranged from 600 to 800 Da. The water flux, rejection of lignin, and sodium ions were 5.6 L/m² h·bar, ~92.1%, and ~5.5%, respectively. In a five-day NF process, the TiO₂/GO-Al₂O₃ HF NF membrane exhibits good lignin permeation stability of about 14.5 L/m² h.

Optimization of reduced graphene oxide production using central composite design from Pennisetum glaucum for biomedical applications

The current study outlines the toxicity free Green synthesis of reduced Graphene oxide (GO) using Celosia argenta. The synthesized sample was characterized by UV- Visible spectroscopy with a strong absorption peak at 260 nm due to redshift. The 2θ value around 24.1° by XRD analysis and the functional groups like -OH, -CH2-, -C = C- and -CHO by FT- IR confirmed the reduction of GO. FE-SEM EDX reported stacked sheets with smooth edges with an atomic ratio of Carbon: Oxygen (83.56:16.44). The TEM images proved the reduction of GO by folded thin sheets with the wrinkled appearance of our sample. This novel material showed antibacterial efficiency of 51.72% - 70.83% for both gram-negative and gram-positive organisms. 89.48% of anti-oxidant effect and potential anti-inflammatory property with the IC50 value of 86.04% was reported. RSM study proved the optimization of maximum yield and Two-way ANOVA reported the statistical significance (p-value ≤ 0.05) for its anti-inflammatory effect. Bio-Gel formulated with a good spreadability rate and promising biocompatibility was proved with less Hemolysis value of 2.74%. The Genotoxicity study exposed the aberration-free active mitotic cell division in Onion root tip cells. All these showcased that, our biomaterial can find promising applications in Biomedical and Therapeutic fields. Pearl Millet powder acts as a low cost bio source for GO preparation. Celosia Argenta leaf extract supports rGO synthesis by Green method. rGO has proved significant Biomedical Applications. rGO Bio-Gel formulation will be a promising Biomaterial. This article is protected by copyright. All rights reserved.

Electrochemical immunosensor for detection of avian Salmonellosis based on electroactive reduced graphene oxide (rGO) modified electrode

A novel reduced graphene oxide based (rGO) fluorine doped tin oxide (FTO) electrode was fabricated to explore the interaction of Salmonella serovars (Salmonella gallinarum, and Salmonella pullorum) with specific antibodies. Reduced graphene oxide (rGO) was labelled with S. gal and S. pul-Ab via carbodiimide activation. The biophysical characterization of fabricated electrode was done by Fourier-transform infrared spectroscopy (FT-IR), Raman Spectroscopy, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Analysis (EDX), cyclic voltammetry (CV), and differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The optimization of fabricated electrode was done for various physico-chemical parameters. Under optimum conditions, the immunosensor exhibited a linear detection range (1- 1 × 105 cells) with 37 and 25 viable cells of S. gal and S. pul, respectively. The developed FTO/rGO/S.gal or S.pul-Ab/Ag immunosensor successfully detected S. gal or S. pul up to 51 and 37 cells, respectively in faecal samples and 218 and 173 cells, respectively in meat samples. FTO/rGO/S.gal or S.pul-Ab/Ag immunosensor revealed satisfactory response, and exhibited relatively low detection limit along with reproducibility. The proposed sensing model can be used as an alternative quantitative tool for the rapid and sensitive detection of Salmonellosis in meat and faecal samples.

Superior quality chemically reduced graphene oxide for high performance EMI shielding materials

The chemical reduction process of graphene oxide combined with a mild and controllable thermal treatment under vacuum at 200 °C for 4 hours provided a cost-effective, scalable, and high-yield route for Reduced Graphene Oxide (RGO) industrial production and became a potential candidate for producing electromagnetic interference (EMI) shielding. We investigated graphite, and RGO using l-ascorbic acid and Sodium borohydride before and after thermal treatment by carefully evaluating the chemical and morphological structures. The thermally treated l-ascorbic Acid reduction route (TCRGOL) conductivity was 2.14 × 10³ S m⁻¹ and total shielding efficiency (SET) based on mass loadings per area of shielding was 94 dB with about one-tenth less graphite weight and surpassing other graphene reduction mechanisms in the frequency range of 8.2–12.4 GHz, i.e., X-band, at room temperature while being tested using the waveguide line technique. The developed treatment represents valuable progress in the path to chemical reduction using a safe reducing agent and offering superior quality RGO rarely achieved with the top-down technique, providing a high EMI shielding performance.

The developed two-step protocol offers a superior reduced graphene oxide TCRGOL quality (7 layers), and its SET was 94 dB over the X-band.

Enhanced Electrochemical Performance of Micro-Supercapacitors Via Laser-Scribed Cobalt/Reduced Graphene Oxide Hybrids

The evolution of "smart life," which connects all internet-of-things (IoT) microdevices and microsensors under wireless communication grids, requires microscale energy storage devices with high power and energy density and long-term cyclability to integrate them with sustainable power generators. Instead of Li-ion batteries with a short lifetime, pseudocapacitors with longer or infinite cyclability and high-power density have been considered as efficient energy storage devices for IoT. However, the design and fabrication of microscale pseudocapacitors have difficulties in patterning microscale electrodes when loading active materials at specific points of the electrodes using conventional microfabrication methods. Here, we developed a facile, one-step fabrication method of micro-supercapacitors (MSCs) through the in situ formation of Co metals and the reduced graphene oxides (rGOs) in a one-pot laser scribing process. The prepared Co/rGO MSC thus exhibited four times higher capacitance than the rGO MSC, due to the Faradaic charge capacitance behavior of the Co/rGO composites.

Electrochemical sensor based on glassy carbon electrode modified by polymelamine formaldehyde/graphene oxide nanocomposite for ultrasensitive detection of oxycodone

Polymelamine formaldehyde/graphene oxide (PMF/GO) nanocomposite was used, for the first time, to study the ultrasensitive and selective electrochemical detection of oxycodone (OXC). The successful characterization of PMF/GO was verified based on scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), and Raman spectroscopy. The modified GCE (PMF/GO-GCE) proved its electrocatalytic effect on OXC determination according to cyclic, linear sweep, and differential pulse voltammetry (CV, LSV, and DPV) and electrochemical impedance spectroscopy (EIS) studies. The developed sensor under optimal conditions offered a linear relationship in a limited range of  0.01 to 45 μmol L^-1 with the limit of detection (LOD) of 2.0 nmol L^-1. The proposed PMF/GO-GCE sensor was effectively employed for the OXC detection in human urine and serum samples. Graphical abstract.

In Vitro Hyperthermia Evaluation of Electrospun Polymer Composite Fibers Loaded with Reduced Graphene Oxide

Electrospun meshes (EM) composed of natural and synthetic polymers with randomly or aligned fibers orientations containing 0.5% or 1% of thermally reduced graphene oxide (TrGO) were prepared by electrospinning (ES), and their hyperthermia properties were evaluated. EM loaded with and without TrGO were irradiated using near infrared radiation (NIR) at 808 nm by varying the distance and electric potential recorded at 30 s. Morphological, spectroscopic, and thermal aspects of EM samples were analyzed by using SEM-EDS, Raman and X-ray photoelectron (XPS) spectroscopies, X-ray diffraction (XRD), and NIR radiation response. We found that the composite EM made of polyvinyl alcohol (PVA), natural rubber (NR), and arabic gum (AG) containing TrGO showed improved hyperthermia properties compared to EM without TrGO, reaching an average temperature range of 42–52 °C. We also found that the distribution of TrGO in the EM depends on the orientation of the fibers. These results allow infering that EM loaded with TrGO as a NIR-active thermal inducer could be an excellent candidate for hyperthermia applications in photothermal therapy.

Tungsten nitride-coated graphene fibers for high-performance wearable supercapacitors

Graphene-fiber (GF) supercapacitors have attracted significant research attention in the field of wearable devices. However, there is still a need for active materials with high energy density. Transition Metal Nitrides (TMNs) are promising candidates for this purpose compared with conventional Transition Metal Oxides (TMOs) or conducting polymers (CPs) owing to their higher electrical conductivity, stability and relevant electrochemical properties. We have successfully integrated Tungsten Nitride (WN) with reduced graphene oxide fibers (rGOF) and developed high-performance hybrid fiber (WN-rGOF) supercapacitors. These hybrid supercapacitors attained a high capacitance of 16.29 F cm-3 at 0.05 A cm-3 and an energy density of 1.448 mW h cm-3, which is 7.5 and 1.75 times higher than those of the pure rGOF supercapacitor and the Tungsten Oxide/rGO hybrid fiber (WO3-rGOF) supercapacitor, respectively. The energy density readily increased up to 2.896 mW h cm-3 when three WN-rGOF supercapacitors were connected in series. The WN-rGOF supercapacitor also showed high capacitance retention of 84.7% after 10 000 cycles along with appreciable performance under severe mechanical deformation.

Graphene oxide/alginate/silk fibroin composite as a novel bionanostructure with improved blood compatibility, less toxicity and enhanced mechanical properties

For biomedical applications, the design and synthesis of biocompatible nanostructures, are considered as critical challenges. In this study, graphene oxide (GO) was covalently modified by natural sodium alginate (Alg) polymer. By adding silk fibroin (SF) to this nanostructure, a hybrid nanobiocomposite (GO/Alg/SF) was resulted and its unique features were determined using FT-IR, EDX, FE-SEM, XRD and TG analyses. Because of using less toxic and high biocompatible materials, specific biological results were achieved. The cell viability of this novel nanostructure was 89.2 % and its hemolytic effect was less than 6% while the highest concentration (1000 μg/mL) of this nanostructure was chosen for these purposes. Also, high mechanical properties including the compressive strength (0.87 ± 0.034 (MPa)) and the compressive modulus (2.25 ± 0.091 (MPa)) were exposed. This nanostructure can be considered as a scaffold for wound dressing applications due to the mentioned properties.

Reduced graphene oxide-based magnetic composite for trace determination of polycyclic aromatic hydrocarbons in cosmetics by stir bar sorptive dispersive microextraction

This work describes a sensitive and rapid analytical method for trace determination of polycyclic aromatic hydrocarbons (PAHs) in cosmetic samples. The proposed method is based on stir bar sorptive-dispersive microextraction (SBSDME). A magnetic composite made of CoFe₂O₄ magnetic nanoparticles embedded into reduced graphene oxide sheets is used as sorbent phase. After the extraction, the target analytes are desorbed in toluene and then analyzed by gas chromatography-mass spectrometry (GC-MS). The main parameters involved in the extraction procedure (i.e., composite amount, extraction time and desorption time) were evaluated and optimized to provide the best extraction efficiency. The method was successfully validated under the selected conditions, showing a linear range of at least up to 125 ng mL^-1, instrumental and method limits of detection from 0.02 to 2.50 ng mL^-1 and from 0.15 to 24.22 ng g^-1, respectively, and relative standard deviations (RSD) below 10 % for all the target analytes. Standard addition combined with internal standard calibration was employed for quantification. The proposed method was successfully applied to the analysis of ten PAHs in four cosmetic products of different matrix. Several analytes between 14 and 464 ng g^-1 were found, some of them prohibited in cosmetic products. This work expands the analytical potential of SBSDME technique to other analytes and to the use of new sorbent phases, showing the great versatility of this approach depending on the characteristics of the analytes.

A magnetic nanoparticle functionalized reduced graphene oxide-based drug carrier system for a chemo-photodynamic cancer therapy

The proposed work shows the dual therapeutic impact of an external stimulus responsive CPT loaded MrGO-AA-g-4-HC carrier system for cancer treatments.

A "One-Pot" Route for the Synthesis of Snowflake-like Dendritic CoNi Alloy-Reduced Graphene Oxide-Based Multifunctional Nanocomposites: An Efficient Magnetically Separable Versatile Catalyst and Electrode Material for High-Performance Supercapacitors

In this paper, a simple "one pot" methodology to synthesize snowflake-like dendritic CoNi alloy-reduced graphene oxide (RGO) nanocomposites has been reported. First-principles quantum mechanical calculations based on density functional theory (DFT) have been conducted to understand the electronic structures and properties of the interface between Co, Ni, and graphene. Detailed investigations have been conducted to evaluate the performance of CoNi alloy and CoNi-RGO nanocomposites for two different types of applications: (i) as the catalyst for the reduction reaction of 4-nitrophenol and Knoevenagel condensation reaction and (ii) as the active electrode material in the supercapacitor applications. Here, the influence of microstructures of CoNi alloy particles (spherical vs snowflake-like dendritic) and the effect of immobilization of CoNi alloy on the surface of RGO on the performance of CoNi-RGO nanocomposites have been demonstrated. CoNi alloy having a snowflake-like dendritic microstructure exhibited better performance than that of spherical CoNi alloy, and CoNi-RGO nanocomposites showed improved properties compared to CoNi alloy. The k app value of the (CoNiD)60RGO40-catalyzed reduction reaction of 4-nitrophenol is 20.55 × 10-3 s-1, which is comparable and, in some cases, superior to many RGO-based catalysts. The (CoNiD)60RGO40-catalyzed Knoevenagel condensation reaction showed the % yield of the products in the range of 80-93%. (CoNiD)60RGO40 showed a specific capacitance of 501 F g-1 (at 6 A g-1), 21.08 Wh kg-1 energy density at a power density of 1650 W kg-1, and a retention of ∼85% of capacitance after 4000 cycles. These results indicate that (CoNiD)60RGO40 could be considered as a promising electrode material for high-performance supercapacitors. The synergistic effect, derived from the hierarchical structure of CoNiD-RGO nanocomposites, is the origin for its superior performance. The easy synthetic methodology, high catalytic efficiency, and excellent supercapacitance performance make (CoNiD)60RGO40 an appealing multifunctional material.

Ultrasensitive electrochemical detection of ochratoxin A based on signal amplification by one-pot synthesized flower-like PEDOT-AuNFs supported on a graphene oxide sponge

To enhance the sensitivity of an aptasensor, a novel strategy was designed to develop an electrochemical aptasensor based on poly(3,4-ethylenedioxy thiophene)-gold nanoflower (PEDOT-AuNF) composites supported on a three-dimensional graphene oxide sponge (GOS). GOS with a three-dimensional sponge-like porous structure, exhibiting excellent electrical conductivity and a large surface area, provided the first amplification of the electrochemical signal for ochratoxin A (OTA) detection. PEDOT-AuNFs, synthesized by an ionic liquid-assisted one-pot method, presented a peculiar hierarchical flower-like structure, a high electroactive surface area, and more binding sites for immobilizing the aptamer molecules by the Au-S bonds. When PEDOT-AuNFs were supported on the surface of GOS by the interaction of the π-π packing between PEDOT and graphene oxide, a synergistic effect was produced to provide the second amplification for the aptasensor. PEDOT-AuNFs/GOS provided an ultrasensitive detection technique by multiple signal amplification for the electrochemical sensing of OTA. Consequently, this strategy not only endowed the aptasensor with high sensitivity but also needed no complicated signal amplification. The electrochemical sensor was fabricated successfully on a glassy carbon electrode to detect OTA with a linear response in the range of 0.01-20 ng L^-1 and a limit of detection of 4.9 pg L^-1. Moreover, it displayed good specificity, reproducibility and stability. The utilization of the proposed aptasensor for the quantitative determination of OTA in wine indicates that it can find promising applications in detecting OTA and even other mycotoxins in foodstuffs.

Synthesis and Characterization of Samarium-Substituted Molybdenum Diselenide and Its Graphene Oxide Nanohybrid for Enhancing the Selective Sensing of Chloramphenicol in a Milk Sample

The electronic conductivity and electrocatalytic activity of metal chalcogenides are normally enhanced by following the ideal strategies such as substitution/doping of heterogeneous atoms and hybridization of highly conductive carbon supportive materials. Here, a rare earth element (samarium) was substituted with MoSe₂ using the simple hydrothermal method. The lattice distortion due to the substitution of Sm³⁺ with MoSe₂ was clearly observed by using high-resolution transmission electron microscopy analysis. As a consequence, the prepared SmMoSe₂ nanorod was encapsulated with graphene oxide (GO) sheets by using ultrasonication process. Furthermore, the GO-encapsulated SmMoSe₂ nanocomposite modified glassy carbon electrode (GO@SmMoSe₂/GCE) was used for the sensing of chloramphenicol. The results showed that the GO@SmMoSe₂/GCE revealed the superior electrocatalytic activity with low detection (5 nM) and sensitivity (20.6 μA μM^-1 cm^-2) to electrochemical detection of proposed analyte. It indicates that the substitution of Sm³⁺ and encapsulation of GO significantly increased both the electrical conductivity and electrocatalytic activity of MoSe₂.

High performance asymmetric supercapacitor based on Cobalt Nickle Iron-layered double hydroxide/carbon nanofibres and activated carbon

A novel Cobalt Nickle Iron-layered double hydroxide/carbon nanofibres (CoNiFe-LDH/CNFs-0.5) composite was successfully fabricated through an easy in situ growth approach. The morphology and composition of the obtained materials were systematically investigated. When the two derived materials were used for supercapacitor electrodes, the CoNiFe-LDH/CNFs-0.5 composite displayed high specific surface area (114.2 m² g⁻¹), specific capacitance (1203 F g⁻¹ at 1 A g⁻¹) and rate capability (77.1% from 1 A g⁻¹ to 10 A g⁻¹), which were considerably higher than those of pure CoNiFe-LDH. Moreover, the specific capacitance of CoNiFe-LDH/CNFs-0.5 composite remained at 94.4% after 1000 cycles at 20 A g⁻¹, suggesting excellent long-time cycle life. The asymmetric supercapacitor based on CoNiFe-LDH/CNFs-0.5 as a positive electrode and activated carbon as a negative electrode was manufactured and it exhibited a specific capacitance of 84.9 F g⁻¹ at 1 A g⁻¹ and a high energy density of 30.2 W h kg⁻¹. More importantly, this device showed long-term cycling stability, with 82.7% capacity retention after 2000 cycles at 10 A g⁻¹. Thus, this composite with outstanding electrochemical performance could be a promising electrode material for supercapacitors.

Flexible all solid state supercapacitor with high energy density employing black titania nanoparticles as a conductive agent

Increasing the electrical conductivity of pseudocapacitive materials without changing their morphology is an ideal structural solution to realize both high electrochemical performance and superior flexibility for an all solid state supercapacitor (ASSSC). Herein, we fabricate a flexible ASSSC device employing black titania (TiO2-x:N) decorated two-dimensional (2D) NiO nanosheets as the positive electrode and mesoporous graphene as the negative electrode. In this unique design, NiO nanosheets are used as pseudocapacitive materials and TiO2-x:N nanoparticles serve as the conductive agent. Owing to the excellent electrical conductivity of TiO2-x:N and well defined "particle on sheet" planar structure of NiO/TiO2-x:N composites, the 2D morphology of the decorated NiO nanosheets is completely retained, which efficiently reinforces the pseudocapacitive activity and flexibility of the whole all solid state device. The maximum specific capacitance of fabricated the NiO/TiO2-x:N//mesoporous graphene supercapacitor can reach 133 F g(-1), which is 2 and 4 times larger than the values of the NiO based ASSSC employing graphene and carbon black as the conductive agent, respectively. In addition, the optimized ASSSC displays intriguing performances with an energy density of 47 W h kg(-1) in a voltage region of 0-1.6 V, which is, to the best of our knowledge, the highest value for flexible ASSSC devices. The impressive results presented here may pave the way for promising applications of black titania in high energy density flexible storage systems.

Binder-free electrodes of NiMoO4/graphene oxide nanosheets: synthesis, characterization and supercapacitive behavior

In the present work we report a facile and efficient hydrothermal method to fabricate a nanocomposite of NiMoO₄ and graphene nanosheets (NiMoO₄/GNS) on a nickel foam (NF) substrate.