Piezoelectric and Magnetoelectric Effects of Flexible Magnetoelectric Heterostructure PVDF-TrFE/FeCoSiB

Flexible polymer-based magnetoelectric (ME) materials have broad application prospects and are considered as a new research field. In this article, FeCoSiB thin films were deposited on poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) substrate by DC magnetron sputtering. The structure of PVDF-TrFE/FeCoSiB heterostructure thin films was similar to 2-2. Under a bias magnetic field of 70 Oe, the composites have a dramatically increased ME voltage coefficient as high as 111 V/cm⋅Oe at a frequency of about 85 kHz. The piezoelectric coefficient of PVDF-TrFE thin films is 34.87 pC/N. The surface morphology of PVDF-TrFE thin films were studied by FESEM, and the results of XRD and FTIR showed that the β-phase of PVDF-TrFE thin films was dominant. Meanwhile, the effects of different heating conditions on the crystallization and piezoelectric properties of PVDF-TrFE films were also studied. The flexible ME heterojunction composite has a significant ME voltage coefficient and excellent piezoelectric properties at room temperature, which allows it to be a candidate material for developing flexible magnetoelectric devices.

BiFeO3/Fe2O3 electrode for photoelectrochemical water oxidation and photocatalytic dye degradation: A single step synthetic approach

Herein, mixed-phase BiFeO₃/Fe₂O₃ (BF-M) nanocomposite has been successfully prepared in a simple single-step synthetic strategy and its structural, physicochemical and magnetic properties have been characterized. The performance of as-synthesized mixed-phase BF-M catalyst has been investigated in photoelectrochemical (PEC) water oxidation and photocatalytic dye degradation analysis by comparing with the partials Fe₂O₃ with BiFeO₃ (BF-P). The BF-M photocatalyst has degraded 95.7% of the rhodamine B (RhB) dye while BF-P has degraded 82.1% in 80 min. In addition, the BF-M electrode exhibited 0.57 mA cm^-2 photocurrent density which was 1.83 times higher than the BF-P electrode (0.31 mA cm^-2), signifying that the formation of a mixed-phase nanostructure interface is advantageous in enhancing light absorption capacity and reducing the rate of electron-hole recombination.

Exploring the optical limiting, photocatalytic and antibacterial properties of the BiFeO3-NaNbO3 nanocomposite system

Thin films of BiFeO3-NaNbO3 composites were fabricated in a PMMA matrix. XRD and HRTEM were used for structural investigations. The grain size and surface morphology of samples were analysed through HRTEM images. The self-cleaning property of any material accelerates its industrial applications. Hence, along with the optical limiting performance, the photocatalytic and antibacterial activity of BiFeO3-NaNbO3 composite samples were also studied. BiFeO3-NaNbO3 films fabricated in the PMMA matrix exhibit strong optical nonlinearity when excited by 5 ns laser pulses at 532 nm. The origin and magnitude of the observed optical nonlinearity were explained on the basis of the weak absorption saturation and strong excited state absorption. The photocatalytic performance of samples was analysed by dye degradation method using Methyl Orange dye. The dye degradation rate in the presence of the catalyst is heeded in a particular time interval, which exhibits the photocatalytic performance of the samples. The destruction of microbial organisms that are in contact with the material was contemplated, which could prove its antibacterial activity. The effect of the particle size on the photocatalytic activity was also investigated.

Tuning of nonlinear absorption in highly luminescent CdSe based quantum dots with core-shell and core/multi-shell architectures

We present our effort on an efficient way of tuning the nonlinear absorption mechanisms in ultra-small CdSe based quantum dots by implementing core-shell and core/multi-shell architectures. Depending on the size, architecture and composition of the QDs, these materials exhibited resonant and near-resonant nonlinear optical absorption properties such as saturable (SA) and reverse saturable (RSA) absorption for 5 ns pulses of 532 nm. These QDs exhibited a non-monotonic dependence of the effective two-photon absorption coefficient (β) under nanosecond excitation with a maximum value for a thinner shell. We obtained a nonlinear absorption enhancement of an order of magnitude by adopting the core-shell architecture compared to their individual counterparts. Interestingly, CdSe QDs exhibit SA and/or RSA depending on their size and show a switching over from SA to RSA as the input intensity increases. We explained the enhanced nonlinear absorption in core-shell QDs compared to their individual counterparts in view of enhanced local fields associated with the core-shell structure. Thus, the present nanostructured materials are excellent candidates as saturable absorbers and optical limiters.

dz2 orbital-mediated bound magnetic polarons in ferromagnetic Ce-doped BaTiO3 nanoparticles and their enriched two-photon absorption cross-section

The enriched ferromagnetism and two-photon absorption (TPA) cross-section of perovskite BaTiO3 nanoparticles are indispensable for magnetic and optical data storage applications. In this work, hydrothermally synthesized Ce-doped BaTiO3 nanoparticles exhibited the maximum room temperature ferromagnetism (4.26 × 10-3 emu g-1) at 4 mol% due to the increase in oxygen vacancies, as evidenced by X-ray photoelectron and electron spin resonance spectroscopy and density functional theory (DFT) calculations. Hence, the oxygen vacancy-constituted bound magnetic polaron (BMP) model was invoked to explain the enhancement in ferromagnetism. The BMP theoretical model indicated an increase in BMP magnetization (M0, 3.0 to 4.8 × 10-3 emu g-1) and true spontaneous moment per BMP (meff, 4 to 9.88 × 10-4 emu) upon Ce doping. DFT calculations showed that BMPs mediate via the Ti dz2 orbitals, leading to ferromagnetism. Besides, it is known that the magnetic moment induced by Ce at the Ba site is higher than Ce at the Ti site in the presence of oxygen vacancies. The open aperture Z-scan technique displayed the highest TPA coefficient, β (7.08 × 10-10 m W-1), and TPA cross-section, σTPA (455 × 104 GM), at 4 mol% of Ce as a result of the robust TPA-induced excited state absorption. The large σTPA is attributed to the longer excited state lifetime, τ (7.63 ns), of the charge carriers created by oxygen vacancies and Ce ions, which encounter several electronic transitions in the excited sub-states.

Enhanced Ultrafast Nonlinear Optical Response in Ferrite Core/Shell Nanostructures with Excellent Optical Limiting Performance

Nonlinear optical nanostructured materials are gaining increased interest as optical limiters for various applications, although many of them suffer from reduced efficiencies at high-light fluences due to photoinduced deterioration. The nonlinear optical properties of ferrite core/shell nanoparticles showing their robustness for ultrafast optical limiting applications are reported. At 100 fs ultrashort laser pulses the effective two-photon absorption (2PA) coefficient shows a nonmonotonic dependence on the shell thickness, with a maximum value obtained for thin shells. In view of the local electric field confinement, this indicates that core/shell is an advantageous morphology to improve the nonlinear optical parameters, exhibiting excellent optical limiting performance with effective 2PA coefficients in the range of 10^-12 cm W^-1 (100 fs excitation), and optical limiting threshold fluences in the range of 1.7 J cm^-2 . These values are comparable to or better than most of the recently reported optical limiting materials. The quality of the open aperture Z-scan data recorded from repeat measurements at intensities as high as 35 TW cm^-2 , indicates their considerably high optical damage thresholds in a toluene dispersion, ensuring their robustness in practical applications. Thus, the high photostability combined with the remarkable nonlinear optical properties makes these nanoparticles excellent candidates for ultrafast optical limiting applications.

Electric, magnetic, piezoelectric and magnetoelectric studies of phase pure (BiFeO3–NaNbO3)–(P(VDF-TrFE)) nanocomposite films prepared by spin coating

(BiFeO₃–NaNbO₃)–(P(VDF-TrFE)) co-polymer thin films were fabricated by spin coating technique and their electric, magnetic, electromechanical and magnetoelectric properties were investigated.

Size–strain distribution analysis of SnO2 nanoparticles and their multifunctional applications as fiber optic gas sensors, supercapacitors and optical limiters

SnO₂ nanoparticles (NPs) were prepared by a wet chemical method and characterized by X-ray diffraction (XRD) (rutile tetragonal), Fourier transform infrared spectroscopy (FTIR) (Sn–O, 657 cm⁻¹) and micro Raman spectroscopy (Sn–O, 635 cm⁻¹).