Enhanced photocatalytic degradation of Rhodamine B using gold nanoparticles decorated on BaTiO3 with surface plasmon resonance enhancement

This study focused on synthesizing and applying gold nanoparticle (Au NP) decorated barium titanate (BaTiO3) nanoparticles for photocatalytic purposes. BaTiO3 NPs were synthesized using a facile hydrothermal method. Various techniques were employed to characterize the structure and morphological characteristics of the prepared materials. The photocatalytic degradation of Rhodamine B over the Au NPs-modified BaTiO3 photocatalysts was studied. Trapping experiments were conducted using different scavengers to elucidate the degradation mechanism and the involvement of photogenerated species. The incorporation of an appropriate amount of Au NPs into the composites resulted in a significant improvement in photocatalytic activity, attributed to the combined effect of Schottky junction at the interface and the surface plasmon resonance of Au NPs.

Hydrogen bond-mediated self-assembly of Tin (II) oxide wrapped with Chitosan/[BzPy]Cl network: An effective bionanocomposite for textile wastewater remediation

A novel and efficient bionanocomposite was synthesized by incorporating SnO into chitosan (Ch) and a room-temperature ionic liquid (RTIL). The bionanocomposite was synthesized in benzoyl pyridinium chloride [BzPy]Cl to maintain the unique properties of SnO, chitosan, and the ionic liquid. Adsorption and photodegradation processes were applied to evaluate the bionanocomposite for removing azo and anthraquinone dyes and textile wastewater. SnO/[BzPy]Cl and SnO/[BzPy]Cl/Ch samples were prepared and characterized using various techniques, including FT-IR, SEM, XRD, EDAX, XPS, DSC, TGA, nitrogen adsorption/desorption isotherm, and DRS analysis. SEM analysis revealed a hierarchical roughened rose flower-like morphology for the biocomposite. The band gap energies of SnO/[BzPy]Cl and SnO/[BzPy]Cl/chitosan were found to be 3.9 and 3.3 eV, respectively, indicating a reduction in the band gap energy with the introduction of [BzPy]Cl and chitosan. SnO/[BzPy]Cl/Ch showed high removal rates (92-95 %) for Fast Red, Blue 15, Red 120, Blue 94, Yellow 160, and Acid Orange 7 dyes. The adsorption kinetics followed a pseudo-second-order model. In addition, the effect of different photodegradation parameters such as solution pH, dye concentrations, contact time, and amount of photocatalyst, was studied. Given the optimal results obtained in removing azo and anthraquinone dyes, the SnO/[BzPy]Cl/Ch nanocomposite was used as an efficient nanocomposite for removing dyes from textile wastewater. The highest removal efficiency was found to be 95.8 %, obtained under ultraviolet and visible light. Furthermore, BOD and COD reduction analysis showed significant reductions, indicating the excellent performance of the photocatalyst.

A comparison of endosulfan removal by photocatalysis process under UV-A and visible light irradiation: optimization, degradation byproducts and reuse

In this study, the removal efficiency of endosulfan as a persistent organic pollutant and formation of its metabolites were investigated using Ag/TiO2/Fe3O4 photocatalyst under visible and UV-A light. Light intensity, catalyst amount, initial endosulfan concentration, initial pH and time were determined as controllable factors for Taguchi experimental design. The highest removal efficiencies of endosulfan were achieved as 86.14% and 85.46% for visible and UV-A light sources, respectively. According to the greatest best criterion, the level at which the highest S/N ratio was obtained for each parameter was accepted as the optimum value. As a result of the validation experiments, 94.2% and 91.9% efficiency were obtained for visible and UV-A light, respectively. The metabolite formations of endosulfan (endosulfan sulfate, ether, and lactone) remained below 7% in all experiments on a concentration basis. In the reuse experiments of the magnetically recovered photocatalyst, high removal efficiency of around 80% was obtained after four cycles. The removal efficiencies were found to be 86.7% and 84.8%, for real samples taken from the drinking water treatment plant inlet and the spring water network injected with endosulfan under optimal photocatalysis experimental conditions, respectively. It has been shown that nitrate and sulfate anions, which are in significant concentrations in raw water samples, have very little effects on endosulfan removal. The overall results showed that the Ag/TiO2/Fe3O4 photocatalyst was produced successfully, the catalyst was highly effective in the mineralization of endosulfan in synthetic and real water samples under UV and visible light, and effective yields could be obtained even with reuse.

Supplementary information

The online version contains supplementary material available at 10.1007/s40201-023-00864-z.

e-Beam and γ-rays Induced Synthesis and Catalytic Properties of Copper Nanoclusters-Deposited Composite Track-Etched Membranes

Effective removal of toxic inorganic and organic pollutants is one of the current leading challenges of wastewater treatment. In this study, the decomposition of methylene blue (MB) under UV light irradiation was investigated in the presence of copper nanoclusters (NCs)-deposited polyethylene terephthalate (PET) track-etched hybrid membranes. PET track-etched membranes (TeMs) with an average pore size of ~400 nm were grafted by functional acrylic acid (AA) monomer under electron beam irradiation after oxidation with H₂O₂/UV system. The radiation dose varied between 46 and 200 kGy. For the deposition of copper NCs, poly(acrylic acid) (PAA)-grafted membranes saturated with Cu(II) ions were irradiated either by electron beam or γ-rays to obtain copper-based NCs for the catalytic degradation of MB. Irradiation to 100 kGy with accelerated electrons resulted in the formation of small and uniform copper hydroxide (Cu(OH)₂) nanoparticles homogeneously distributed over the entire volume of the template. On the other hand, irradiation under γ-rays yielded composites with copper NCs with a high degree of crystallinity. However, the size of the deposited NCs obtained by γ-irradiation was not uniform. Nanoparticles with the highest uniformity were obtained at 150 kGy dose. Detailed analysis by X-ray diffraction (XRD) and scanning electron microscopy (SEM) confirmed the loading of copper nanoparticles with an average size of 100 nm on the inner walls of nanochannels and on the surface of PET TeMs. Under UV light irradiation, composite membranes loaded with NCs exhibited high photocatalytic activity. It was determined that the highest catalytic activity was observed in the presence of Cu(OH)₂@PET-g-PAA membrane obtained at 250 kGy. More than 91.9% of the initial dye was degraded when this hybrid membrane was employed for 180 min, while only 83.9% of MB was degraded under UV light using Cu@PET-g-PAA membrane. Cu(OH)₂@PET-g-PAA membranes obtained under electron beam irradiation demonstrated a higher photocatalytic activity compared to Cu@PET-g-PAA membranes attained by γ-rays.

C, F co-doping Ag/TiO2 with visible light photocatalytic performance toward degrading Rhodamine B

The organic pollutants in industrial wastewater continuously endanger human health. Therefore, effective treatment of organic pollutants is very urgent. Photocatalytic degradation technology is an excellent solution to remove it. TiO₂ photocatalysts are easy to prepare and have high catalytic activity, unfortunately, TiO₂ only absorbs ultraviolet light limiting its utilization of visible light. In this study, a facile environmentally friendly synthesis of Ag-coated on micro-wrinkled TiO₂-based catalysts in order to extend the absorption of Visible light. Firstly, a fluorinated titanium dioxide precursor was prepared by a one-step solvothermal method, and the precursor was calcined at high temperature in a nitrogen atmosphere to form a carbon dopant, and then a surface silver-deposited carbon/fluorine co-doped TiO₂ photocatalyst C/F-Ag-TiO₂ was prepared by a hydrothermal method The results showed that the Ag was coated on the wrinkled TiO₂ layer and C/F-Ag-TiO₂ photocatalyst was synthetized successfully. Benefit from the synergistic effect of doped carbon and fluorine atoms in combination with the quantum size effect of the surface silver nanoparticles, the band gap energy of C/F-Ag-TiO₂ (2.56 eV) is obviously lower than anatase (3.2eV). The photocatalyst achieved an impressive degradation rate of 84.2% for Rhodamine B in 4 h, with a degradation rate constant of 0.367 h^-1, which was 17 times higher than that of P25 under visible light. Therefore, the C/F-Ag-TiO₂ composite is a promising candidate as a highly efficient photocatalyst for environmental remediation.

Rhodamine B dye degradation using used face masks-derived carbon coupled with peroxymonosulfate

Catalytic carbon materials from used face masks (UFM) activated by peroxymonosulfate (PMS) were developed for the degradation of rhodamine B (RhB) dye in aqueous solution. The UFM-derived carbon (UFMC) catalyst had a relatively large surface area as well as active functional groups and promoted the generation of singlet ¹O₂ and radicals from PMS, giving a high RhB degradation performance (98.1% after 3 h) in the presence of 3 mM PMS. The UFMC could degrade only 13.7% at a minimal RhB dose of 10^-5 M. The principal reactive oxygen species of sulphate (SO₄^•), hydroxyl radicals (^•OH), and singlet ¹O₂ were discovered using electron paramagnetic resonance and radical scavenger studies. Finally, a toxicological plant and bacterial study was performed to demonstrate the potential non-toxicity of the degraded RhB water sample.

Functionalization of graphene nanostructures with inorganic nanoparticles and their use for the removal of pharmaceutical pollutants in water

Emerging pollutants such as pharmaceuticals are of special concern because despite their low environmental concentration, their biological activity can be intense, and they should be prevented to reach uncontrolledly to the environment. A graphene-based hybrid material decorated with Fe3O4 and TiO2 nanoparticles (NPs) has been prepared to effectively remove emerging pollutants as nonsteroidal anti-inflammatory drugs (NSAIDs) Ibuprofen and Diclofenac present in water at low environmental concentrations by a one-step functionalization process following a novel gentle and scalable surfactant depletion approach. Following this methodology, nanoparticles are progressively deprived of their original surfactant in the presence of graphene, leading to the formation of hybrid nanostructures composed of two different types of nanoparticles well dispersed over the graphene nanosheets. Ibuprofen and Diclofenac adsorption kinetics on the composites was investigated via UV-Vis spectroscopy. The as prepared hybrid material possesses high adsorption capacity, superparamagnetic properties, photocatalytic behavior, and good water dispersibility. Thanks to incorporating TiO2 nanoparticles as in situ catalysts, the adsorption performance of composites is restored after use, which could be a promising recycling pathway for the adsorbents in wastewater treatments.

Photocatalytic Activity of TiO2 for the Degradation of Anticancer Drugs

To prevent water pollution, photocatalysis is often used to remove small molecules such as drugs by generating reactive species. This study aimed to determine the photocatalytic activity of two anticancer drugs, imatinib and crizotinib, and to investigate various influences that may alter the kinetic degradation rate and ultimately the efficacy of the process. In order to obtain optimal parameters for the removal of drugs with immobilized TiO₂, the mutual influence of the initial concentration of the contaminant at environmentally relevant pH values was investigated using the response surface modeling approach. The faster kinetic rate of photocatalysis was obtained at pH 5 and at the smallest applied concentration of both drugs. The photocatalytic efficiency was mostly decreased by adding various inorganic salts and organic compounds to the drug mixture. Regarding the degradation mechanism of imatinib and crizotinib, hydroxyl radicals and singlet oxygen showed a major role in photochemical reactions. The formation of seven degradation products for imatinib and fifteen for crizotinib during the optimal photocatalytic process was monitored by high-resolution mass spectrometry (HPLC-QqTOF). Since the newly formed products may pose a hazard to the environment, their toxicity was studied using Vibrio fischeri, where the significant luminescence inhibition was assessed for the mixture of crizotinib degradants during the photocatalysis from 90 to 120 min.

Synthesis of Template-Free Iron Oxyhydroxide Nanorods for Sunlight-Driven Photo-Fenton Catalysis

Designing a photocatalyst with high efficiency using semiconductor materials emerges as a promising approach for the treatment of wastewater. At the same time, it is very essential to develop nondestructive, green, and sustainable techniques for the degradation of refractory pollutants. Here, we have demonstrated a facile route to prepare iron oxyhydroxide nanorods (β-FeOOH) without employment of any templating agent via a light-driven solution chemistry pathway and explored the as-prepared nanorods as the photo-Fenton catalyst under solar light irradiation. The photocatalytic experiments were performed toward the degradation of the aqueous solution of two different pollutants, namely, methylene blue and rhodamine B dyes. We have illustrated the effect of pH of the solution together with the concentration of H₂O₂ during the degradation process and optimized the solution pH as well as the H₂O₂ concentration. The superb photocatalytic efficiency of β-FeOOH is attributed to the generation of reactive oxygen species in the presence of solar light, and these photo-produced reactive oxygen species assist the degradation process. The excellent photocatalytic efficacy and sustainability of β-FeOOH nanorods along with their effortless synthesis approach point to a cost-effective and environmentally benign pathway in fabricating a highly active photocatalyst for the degradation of organic dyes.

Acoustic Droplet-Assisted Superhydrophilic-Superhydrophobic Microarray Platform for High-Throughput Screening of Patient-Derived Tumor Spheroids

Cell-based high-throughput screening is a key step in the current disease-based research, drug development, and precision medicine. However, it is challenging to establish a rapid culture and screening platform for rare cells (patient-derived) due to the obvious differences between the traditional 2D cell model and the tumor microenvironment, as well as the lack of a low-consumption screening platform for low numbers of cells. Here, we developed an acoustic drop-assisted superhydrophilic-superhydrophobic microarray platform for the rapid culture and screening of a few cells. By employing hydrophilic and hydrophobic microarrays, we can automatically distribute the cell suspension into uniform droplets, and these cells can spontaneously form compact 3D cell spheroids within 36 h (similar to the microenvironment of tumors in vivo). By using the acoustic droplet ejection device, we can accurately inject a drug solution with a volume of ∼pL to ∼nL into the droplet, and the whole process can be completed within 20 ms (one print). By using three different cell lines (Caco-2, MCF-7, and HeLa) to optimize the platform, the culture and screening of five patients' colon cancer were subsequently realized. Using three conventional chemotherapeutics (5-fluorouracil, cetuximab, and panitumumab) of various concentrations, the best treatment was screened out and compared with the actual treatment effect of the patients, and the results were extremely similar. As a proof-of-concept application, we have proved that our platform can quickly cultivate patient samples and effectively screen the best treatment methods, highlighting its wide application in precision medicine, basic tumor research, and drug development.

Bandgap Engineering in a Staggered-Type Oxide Perovskite Heterojunction for Efficient Visible Light-Driven Photocatalytic Dye Degradation

Oxide perovskite materials with ABO₃ structure have been widely employed for photocatalytic applications. However, owing to the disadvantageous electron-hole recombination process and wide bandgap of some materials, the photocatalytic performance is seemingly restricted. Coupling two catalysts together through the formation of a heterojunction ensures effective charge carrier separation. The intimate interaction between the materials is propitiously useful for charge transfer, thereby increasing the efficacy. In this study, the photocatalytic activity of a K_xNa_(1-x)NbO₃-BaBiO₃ (KNN-BBO) heterojunction material for the degradation of Rhodamine 6G organic dye was investigated. The materials were extensively characterized by X-ray diffraction, UV-Vis diffused reflectance spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and N₂ adsorption isotherms. The degradation efficiency of the organic contaminant under 1 sun simulated sunlight is monitored by spectral analysis from UV-Vis absorption spectroscopy. The resistance to charge transfer was also observed by electrochemical impedance spectroscopy. The effect of the sintering temperature on the photoinduced degradation activity was also included in our study. An unsintered KNN-BBO (UKB) composite material is found to be the most efficient catalyst with 84% removal efficiency as compared to the sintered one (SKB). This is attributed to the reduced bandgap with staggered-type band alignment, increased surface area, and surface oxygen vacancy states. Together with the crucial findings of this work, a probable mechanism for enhanced photocatalytic activity has been proposed here.

Photocatalytic hydrogen production from dye contaminated water and electrochemical supercapacitors using carbon nanohorns and TiO2 nanoflower heterogeneous catalysts

In this research, efficient and novel catalysts based on hierarchical carbon nanohorns-titanium nanoflowers have been prepared by one-pot solvothermal process. Hydrogen generation from dye-contaminated water and dye degradation along with electrochemical supercapacitance performance have been investigated using the synthesized hierarchical catalyst to produce 4500 μmol g^-1 h^-1 of hydrogen from the photocatalytically generated aqueous methylene blue and methyl orange dyes, which were degraded up to 90% under natural solar light irradiation. These results offer a new path to generate hydrogen from the aqueous dyes. The catalysts electrode showed 164.6 F g^-1 supercapacitance at 5 mV s^-1 scan rate, which is nearly 1.3 and 1.65-times higher than that of pristine titanium nanoflower and carbon nanohorns electrodes, respectively. Such superior results were achieved due to good crystallinity, improved optical absorption strength, strong chemical composition between the two components, and hierarchical morphology as demonstrated from XRD, UV-DRS, TEM, XPS, and Raman spectral characterizations.

The Spinning Voltage Influence on the Growth of ZnO-rGO Nanorods for Photocatalytic Degradation of Methyl Orange Dye

In this work, well-designed zinc oxide-reduced graphene oxide (ZnO-rGO) nanorods (NRs) were synthesized by a hydrothermal method using electrospun ZnO-rGO seed layers. The ZnO-rGO seed layers were fabricated on fluorine-doped tin oxide (FTO) glass substrates through calcined of electrospun nanofibers at 400 °C in the air for 1 h. The nanofibers were prepared by electrospinning different spinning voltages and a spinning solution containing zinc acetate, polyvinyl pyrrolidone, and 0.2 wt% rGO. From a detailed characterization using various analytical techniques, for instance, X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), Raman spectroscopy, photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS), the dependence of the structure, morphology, and optical properties of the ZnO-rGO NRs was demonstrated. The photocatalytic activities of ZnO-rGO nanorods were evaluated through the degradation of dye methyl orange (MO). The results show that the change of spinning voltages and the coupling of rGO with ZnO improved photodecomposition efficiency as compared to pure ZnO. The highest photocatalytic efficiency was obtained for the ZnO-rGO NRs prepared with a spinning voltage of 40 kV.

Catalytic Decolorization of Rhodamine B, Congo Red, and Crystal Violet Dyes, with a Novel Niobium Oxide Anchored Molybdenum (Nb–O–Mo)

In this work, a new metal-to-metal charge transfer (MMCT) heterogeneous catalyst (Nb–O–Mo) was synthesized by a chemical grafting method under an inert atmosphere. The activity of the covalently anchored oxo-bridged Nb–O–Mo catalyst was estimated for decolorization of Rh B, congo red, and crystal violet dyes in an aqueous solution under fluorescent light. The catalyst was characterized via X-ray diffraction, scanning electron microscopy with energy-dispersive X-ray spectrometer, Fourier-transform infrared, and FT-Raman. The catalytic decolorization was evaluated from the UV spectra of dyes in aqueous solution by changing different factors, including dye concentration, temperature, and catalyst loading. Decolorization percentages were 83%–89%, 86%–95%, 97%–99% for Rh B, Congo Red and Crystal Violet in 1 min at 298 K, showing the best performance among other catalysts. Decolorization efficiency for 50 ppm of Rh B was improved from 92% to 98%, with a temperature increase to 318 K.

Influence of Mg, Cu, and Ni Dopants on Amorphous TiO2 Thin Films Photocatalytic Activity

The present study investigates Mg (0 ÷ 17.5 wt %), Cu (0 ÷ 21 wt %) and Ni (0 ÷ 20.2 wt %) dopants (M-doped) influence on photocatalytic activity of amorphous TiO₂ thin films. Magnetron sputtering was used for the deposition of M-doped TiO₂ thin films. According to SEM/EDS surface analysis, the magnetron sputtering technique allows making M-doped TiO₂ thin films with high uniformity and high dopant dispersion. Photocatalysis efficiency analysis was set in oxalic acid under UV irradiation. In accordance with the TOC (total organic carbon) measurements followed by the apparent rate constant (k_app) results, the dopants’ concentration peak value was dopant-dependent; for Mg/TiO₂, it is 0.9% (k_app—0.01866 cm⁻¹), for Cu/TiO₂, it is 0.6% (k_app—0.02221 cm⁻¹), and for Ni/TiO₂, it is 0.5% (k_app—0.01317 cm⁻¹). The obtained results clearly state that a concentration of dopants in TiO₂ between 0.1% and 0.9% results in optimal photocatalytic activity.

Organic–inorganic bimetallic hybrid particles with controllable morphology for the catalytic degradation of organic dyes

Amphiphilic bimetallic hybrid Janus nanoparticles with controllable morphology and ability to perform highly efficient catalytic degradation of organic dyes.

Adsorptive removal and photocatalytic degradation of organic pollutants using metal oxides and their composites: A comprehensive review

Metal oxide nanomaterials and their composites are comprehensively reviewed for water remediation. The controlled morphological and textural features, variable surface chemistry, high surface area, specific crystalline nature, and abundant availability make the nanostructured metal oxides and their composites highly selective materials for efficient removal of organic pollutants based on adsorption and photocatalytic degradation. A wide range of metal oxides like iron oxides, magnesium oxide, titanium oxides, zinc oxides, tungsten oxides, copper oxides, metal oxides composites, and graphene-metal oxides composites having variable structural, crystalline and morphological features are reviewed emphasizing the recent development, challenges, and opportunities for adsorptive removal and photocatalytic degradation of organic pollutants viz. dyes, pesticides, phenolic compounds, and so on. It also covers the deep discussion on the photocatalytic mechanism of metal oxides and their composites along with the properties relevant to photocatalysis. High photodegradation efficiency, economically-viable approaches for the preparation of photocatalytic materials, and controlled band-gap engineering make metal oxides highly efficient photocatalysts for degradation of organic pollutants. The review would be an excellent resource for researchers who are currently focusing on metal oxides-based materials for water remediation as well as for those who are interested in adsorptive and photocatalytic applications of metal oxides and their composites.

UV/H2O2/Ferrioxalate Based Integrated Approach to Decolorize and Mineralize Reactive Blue Dye: Optimization Through Response Surface Methodology

The decolorization and mineralization of Reactive Blue 222 dye was studied using UV/H2O2/ferrioxalate approach in combination with Pleorotus ostreatus. The dye was decolorized by UV/H2O2/ferrioxalate based advanced oxidation process (AOP) at different levels of process variables dye concentration, catalyst dose, pH, reaction time and resultantly, 80% decolorization was achieved. Pleorotus ostreatus treatment enhanced the dye degradation up to 92% at optimum levels of pH, temperature, inoculum size, carbon and nitrogen sources at specific concentration. Response Surface Methodology (RSM) was employed for optimization under face-centered central composite design (CCD). Although both treatments were found efficient for the removal of dye, but on applying the integrated approach, 96% dye removal was obtained which led to complete degradation of the dye. FTIR analysis confirmed the degradation of dye into low mass compounds. The water quality assurance parameters were measured to assess the mineralization efficiency. A significant reduction in COD (94%) and TOC (92%) were found when dye was degraded integrated approach. A phytotoxicity analysis on Pisum sativum plant revealed the non-toxic behavior of metabolites produced. Results revealed that the integrated approach is highly promising for the decolorization and mineralization of the Reactive Blue 222 dye and is also extendable to treat the dye in textile wastewater.

Synthesis, characterization and photo-catalytic performance of meso-porous Si–N co-doped nano-spherical anatase TiO2 with high thermal stability

Meso-porous Si–N co-doped nano-spherical anatase TiO₂ with high thermal stability.