The Performance of Different AgTiO2 Loading into Poly(3-Nitrothiophene) for Efficient Adsorption of Hazardous Brilliant Green and Crystal Violet Dyes

The in-situ polymerization technology was used to successfully produce nanostructured binary nanocomposites (NCs) made from a poly (3-nitrothiophen) matrix (P3NT) that were loaded effectively with nanoparticles (NPs) of silver titanium dioxide (AgTiO2), of varying percentages (10%, 20%, and 30%). A uniform coating of P3NT covers the AgTiO2 NPs. Various methods were performed to confirm the fabrication of the binary P3NT/AgTiO2 NCs adsorbents, such as FTIR, XRD, SEM, and EDX. Both dyes (brilliant green (B.G.) and crystal violet (C.V.)) were removed from liquid media by using the binary P3NT/AgTiO2 NCs. A range of batch adsorption studies was used to optimize various factors that impact the elimination of B.G. or C.V. dyes, including the pH, weight of the binary P3NT/AgTiO2 NC, proportion of AgTiO2 NP, time, and temperature. The pseudo-second-order kinetics ( $R^2=0.999$ ) was better adapted for the adsorption procedure’s empirical data whereby the maximum adsorption capacity of the C.V. dye was 43.10 mg/g and ( $R^2=0.996$ ) the maximum adsorption potential was 40.16 mg/g for B.G. dye, succeeded by the pseudo-second-order kinetics. Moreover, the adhesion of B.G. and C.V. pigments on the layers of NCs involves an endothermic reaction. In addition, the concocted adsorbent not only exhibited strong adsorption characteristics during four consecutive cycles but also possessed a higher potential for its reuse. According to the findings, the NCs might possibly be used as a robust and reusable adsorbent to remove B.G. and C.V. pigments from an aqueous medium.

Photocatalytic Degradation of Organic Dyes and Antimicrobial Activities by Polyaniline-Nitrogen-Doped Carbon Dot Nanocomposite

Nitrogen-doped carbon nanodots (N@CDs) were prepared by hydrothermal processing of bovine serum albumin (Mw: 69,324 with 607 amino acids). A polyaniline (PANI-N@CDs) nanocomposite was then synthesized by ultrasonication and used to degrade Congo red (CR), methylene blue (MB), Rhodamine B (RhB), and crystal violet (CV) four common organic dyes. The PANI-N@CD nanocomposite simultaneously adsorbed and concentrated the dye from the bulk solution and degraded the adsorbed dye, resulting in a high rate of dye degradation. The combination of holes (h+), hydroxyl (OH•), and O2•- was involved in the N@CD-mediated photocatalytic degradation of the dyes. Under visible light illumination at neutral pH, the PANI-N@CDs were proven as an efficient adsorbent and photocatalyst for the complete degradation of CR within 20 min. MB and RhB were also degraded but required longer treatment times. These findings supported the design of remediation processes for such dyes and predicted their fate in the environment. The nanocomposite also exhibited antimicrobial activities against Gram-negative bacterium E. coli and Gram-positive bacterium S. aureus.

Fabrication, Functionalization, and Application of Carbon Nanotube-Reinforced Polymer Composite: An Overview

A novel class of carbon nanotube (CNT)-based nanomaterials has been surging since 1991 due to their noticeable mechanical and electrical properties, as well as their good electron transport properties. This is evidence that the development of CNT-reinforced polymer composites could contribute in expanding many areas of use, from energy-related devices to structural components. As a promising material with a wide range of applications, their poor solubility in aqueous and organic solvents has hindered the utilizations of CNTs. The current state of research in CNTs-both single-wall carbon nanotubes (SWCNT) and multiwalled carbon nanotube (MWCNT)-reinforced polymer composites-was reviewed in the context of the presently employed covalent and non-covalent functionalization. As such, this overview intends to provide a critical assessment of a surging class of composite materials and unveil the successful development associated with CNT-incorporated polymer composites. The mechanisms related to the mechanical, thermal, and electrical performance of CNT-reinforced polymer composites is also discussed. It is vital to understand how the addition of CNTs in a polymer composite alters the microstructure at the micro- and nano-scale, as well as how these modifications influence overall structural behavior, not only in its as fabricated form but also its functionalization techniques. The technological superiority gained with CNT addition to polymer composites may be advantageous, but scientific values are here to be critically explored for reliable, sustainable, and structural reliability in different industrial needs.

Current Advances of Polymer Composites for Water Treatment and Desalination

Over the past five years, a lot of research activities in polymer composites were done in order to improve environmental sustainability and to present advantages for commercial applications of water treatment and desalination. Polymers offered tunable properties, improved processability, remarkable stability, high surface area for fast decontamination, selectivity to eliminate different pollutants, and cost-cutting of water treatment. Hence, the development of polymeric materials is one of the future directions to meet the environmental water standards and to supply the water requirements of the growing populations. This review highlighted the very recent achievements in fabrication, characterization, and applications of polymeric composites used for water treatment and desalination. The polymeric modifications, the addition of functional groups, and the assemblies of nanomaterials were also discussed in detail. In particular, great attention was paid to the recent advances in polymer/polymer composites, polymer/carbon composites, and polymer/clay composites, presenting their usage in the removal of various types of contaminants, e.g., metal ions, dyes, and other toxic pollutants. The review also summarized the main advantages and disadvantages of the different adsorbent materials. Specific attention was paid to the mechanism of adsorption, including chemisorption and physisorption mechanisms. In addition, the challenges and the future perspectives were identified to reach the optimal performance of the different adsorbents.

The Nanosized Dye Adsorbents for Water Treatment

Clean water is a vital element for survival of any living creature and, thus, crucially important to achieve largely and economically for any nation worldwide. However, the astonishingly fast trend of industrialization and population growth and the arisen extensive water pollutions have challenged access to clean water across the world. In this regard, 1.6 million tons of dyes are annually consumed. Thereof, 10%–15% are wasted during use. To decolorize water streams, there is an urgent need for the advanced remediation approaches involving utilization of novel materials and technologies, which are cost and energy efficient. Nanomaterials, with their outstanding physicochemical properties, can potentially resolve the challenge of need to water treatment in a less energy demanding manner. In this review, a variety of the most recent (from 2015 onwards) opportunities arisen from nanomaterials in different dimensionalities, performances, and compositions for water decolorization is introduced and discussed. The state-of-the-art research studies are presented in a classified manner, particularly based on structural dimensionality, to better illustrate the current status of adsorption-based water decolorization using nanomaterials. Considering the introduction of many newly developed nano-adsorbents and their classification based on the dimensionality factor, which has never been employed for this sake in the related literature, a comprehensive review will be presented.

Kinetic, isotherm and mechanism studies of organic dye adsorption on poly(4,4′-oxybisbenzenamine) and copolymer of poly(4,4′-oxybisbenzenamine-pyrrole) macro-nanoparticles synthesized by multifunctional carbon dots

The organic dye adsorption on POBBA and COP.

Adsorption of low concentration perchlorate from aqueous solution onto modified cow dung biochar: Effective utilization of cow dung, an agricultural waste

In this study, cow dung biochar (CDB) and ferric chloride-modified CDB (Fe@CDB) were synthesized to remove low concentration perchlorate from water. The pseudo-second-order kinetics model was used and satisfactorily described perchlorate removal onto CDB and Fe@CDB. The Langmuir model fit the experimental isotherm data better than the Freundlich model. The maximum adsorption capacity obtained using the Langmuir model was 1787 μg/g for Fe@CDB and 304 μg/g for CDB. The detrimental effects of coexisting anions decreased as: NO₃^- > SO₄^2- > Cl^-. FeCl₃ modification enhanced ion exchange, and this was the main mechanism rather than electrostatic interactions. Also, after modification, the surface area, pore volume, and pore size increased and promoted adsorption. The surface hydrophilicity increased and so did the amounts of the surface oxygenated functional groups OH and COOH, which were responsible for perchlorate adsorption. The materials were further characterized using Brunner-Emmet-Teller (BET) measurements, Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES), Scanning Electron Microscopy (SEM), Elemental analysis, X-ray photoelectron spectroscopy (XPS), Boehm titration, Zeta potential and Fourier transform infrared spectroscopy (FTIR).

Synthesis of hierarchical hollow sodium titanate microspheres and their application for selective removal of organic dyes

Titanate-based materials are attractive inorganic adsorbents for wastewater treatment. In this study, hierarchical hollow sodium titanate microspheres (HHSTMs) were successfully synthesized via a template-assisted method. Silica microspheres were selected as hard templates, with a uniformly smooth TiO₂ shell first grown onto the surface of the SiO₂ cores. Then, through an alkaline hydrothermal process, the silica core was removed and the TiO₂ shell gradually converted into a sodium titanate shell with a preserved morphology. The as-synthesized HHSTMs are constructed from twined nanobelts, with a high surface area of 308 m² g^-1. A typical organic dye, methylene blue, was employed to investigate the adsorption properties of the HHSTMs. The adsorption process matched well with the Langmuir isothermal model, with the maximum adsorption capacity of methylene blue reaching 443 mg g^-1. Moreover, the resulting HHSTMs can be used to selectively capture of methylene blue from a cationic-anionic dye binary system due to their negatively charged surface. All adsorption processes were very fast and could complete in ten minutes.

Facile preparation of water-soluble hyperbranched polyamine functionalized multiwalled carbon nanotubes for high-efficiency organic dye removal from aqueous solution

Water-soluble hyperbranched polyamine functionalized multiwalled carbon nanotubes nanocomposite (WHPA-OMCNT) was successfully prepared and applied to water remediation in this paper. WHPA-OMCNT was characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), zeta potential, scanning electron microscopy (SEM) and transmission electron microscope (TEM) analyses. WHPA-OMCNT exhibited excellent adsorption performance for removal of organic dyes e.g., methylene blue (MB), malachite green (MG) and methyl violet (MV). The equilibrium adsorption capacity was 800.0 mg g^-1 for MB, 840.3 mg g^-1 for MG and 970.9 mg g^-1 for MV under the optimal conditions. The pseudo-second order equation and the Langmuir model exhibited good correlation with the adsorption kinetic and isotherm data for all three pollutants, respectively. The thermodynamic results (ΔG < 0, ΔH < 0, ΔS < 0) implied that the adsorption process of MB, MG and MV was feasible, exothermic and spontaneous in nature. A possible adsorption mechanism has been proposed, where H-bonding, electrostatic attraction and π-π stacking interactions dominated the adsorption of the organic dyes. In addition, the excellent reproducibility endowed WHPA-OMCNT with the potential for application in water treatment.

Recent progress and development on polymeric nanomaterials for photothermal therapy: a brief overview

This review article summarizes the recent development and progress of polymeric photothermal agents for photothermal therapy and imaging-guided photothermal therapy applications.

One Step Assembly of Thin Films of Carbon Nanotubes on Screen Printed Interface for Electrochemical Aptasensing of Breast Cancer Biomarker

Thin films of organic moiety functionalized carbon nanotubes (CNTs) from a very well-dispersed aqueous solution were designed on a screen printed transducer surface through a single step directed assembly methodology. Very high density of CNTs was obtained on the screen printed electrode surface, with the formation of a thin and uniform layer on transducer substrate. Functionalized CNTs were characterized by X-ray diffraction spectroscopy (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and Brunauer–Emmett–Teller (BET) surface area analyzer methodologies, while CNT coated screen printed transducer platform was analyzed by scanning electron microscopy (SEM), atomic force microscopy (AFM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The proposed methodology makes use of a minimum amount of CNTs and toxic solvents, and is successfully demonstrated to form thin films over macroscopic areas of screen printed carbon transducer surface. The CNT coated screen printed transducer surface was integrated in the fabrication of electrochemical aptasensors for breast cancer biomarker analysis. This CNT coated platform can be applied to immobilize enzymes, antibodies and DNA in the construction of biosensor for a broad spectrum of applications.

Recent developments in polydopamine: an emerging soft matter for surface modification and biomedical applications

After more than four billion years of evolution, nature has created a large number of fascinating living organisms, which show numerous peculiar structures and wonderful properties. Nature can provide sources of plentiful inspiration for scientists to create various materials and devices with special functions and uses. Since Messersmith proposed the fabrication of multifunctional coatings through mussel-inspired chemistry, this field has attracted considerable attention for its promising and exiciting applications. Polydopamine (PDA), an emerging soft matter, has been demonstrated to be a crucial component in mussel-inspired chemistry. In this review, the recent developments of PDA for mussel-inspired surface modification are summarized and discussed. The biomedical applications of PDA-based materials are also highlighted. We believe that this review can provide important and timely information regarding mussel-inspired chemistry and will be of great interest for scientists in the chemistry, materials, biology, medicine and interdisciplinary fields.

Mussel-inspired PEGylated carbon nanotubes: biocompatibility evaluation and drug delivery applications

Carbon nanotubes (CNTs) have been widely examined for biomedical applications. However, surface functionalization of CNTs with polymers is often required to improve their application performance. To obtain these CNT-based polymer nanocomposites, surface-initiated polymerization strategies are generally adopted. However, all of these methods rely on the surface oxidation of CNTs, which is a rather complex and time-consuming procedure, and involves hazardous reagents. In this work, a facile and efficient bio-inspired strategy was developed for surface PEGylation of CNTs via a combination of mussel-inspired chemistry and the Michael addition reaction. The potential biomedical applications of these PEGylated CNTs were evaluated for intracellular delivery of a normally used anticancer drug (Doxorubicin hydrochloride). Two steps were involved in this strategy, which included the surface coating of CNTs with polydopamine (PDA) through self-polymerization of dopamine, and a Michael addition reaction between the PDA-coated CNTs (CNT-PDA) and amino-functionalized polymers, which were obtained by free radical polymerization using poly(ethylene glycol) methyl methacrylate and N-(3-aminopropyl) methacrylamide as monomers. Results suggested that these PEGylated CNTs are well dispersed in aqueous solution and showed improved biocompatibility toward cancer cells. On the other hand, we also demonstrated that DOX can be effectively loaded on these PEGylated CNTs and delivered into cells for cancer treatment. More importantly, this strategy can also be utilized for surface modification of many other materials with different polymers due to the strong and universal adhesion of PDA and designability of polymerization. Therefore, this method should be of great interest for the fabrication of multifunctional nanocomposites for biomedical applications.

Preparation of silica nanoparticle based polymer composites via mussel inspired chemistry and their enhanced adsorption capability towards methylene blue

The highly efficient removal of environmental pollutants from aqueous solution using low cost adsorbents has recently attracted great research attention.

Fabrication of silica nanoparticle based polymer nanocomposites via a combination of mussel inspired chemistry and SET-LRP

A facile and efficient strategy combination of mussel inspired chemistry and SET-LRP has been developed for the surface modification of silica nanoparticles.

Nanodiamond based supermolecular nanocomposites: preparation and biocompatibility evaluation

We reported for the first time that water dispersible and biocompatible ND based supermolecular nanocomposites can be facilely and efficiently fabricated via host–guest interactions.