In vitro degradation, swelling, and bioactivity performances of in situ forming injectable chitosan-matrixed hydrogels for bone regeneration and drug delivery

Injectable, tissue mimetic, bioactive, and biodegradable hydrogels offer less invasive regeneration and repair of tissues. The monitoring swelling and in vitro degradation capacities of hydrogels are highly important for drug delivery and tissue regeneration processes. Bioactivity of bone tissue engineered constructs in terms of mineralized apatite formation capacity is also pivotal. We have previously reported in situ forming chitosan-based injectable hydrogels integrated with hydroxyapatite and heparin for bone regeneration, promoting angiogenesis. These hydrogels were functionalized by glycerol and pH to improve their mechano-structural properties. In the present study, functionalized hybrid hydrogels were investigated for their swelling, in vitro degradation, and bioactivity performances. Hydrogels have degraded gradually in phosphate-buffered saline (PBS) with and without lysozyme enzyme. The percentage weight loss of hydrogels and their morphological and chemical properties, and pH of media were analyzed. The swelling ratio of hydrogels (55%-68%(wt), 6 h of equilibrium) indicated a high degree of cross-linking, can be suitable for controlled drug release. Hydrogels have gradually degraded reaching to 60%-70% (wt%) in 42 days in the presence and absence of lysozyme, respectively. Simulated body fluid (SBF)-treated hydrogels containing hydroxyapatite-induced needle-like carbonated-apatite mineralization was further enhanced by heparin content significantly.

Biodegradable and Biocompatible Adhesives for the Effective Stabilisation, Repair and Regeneration of Bone

Bone defects and complex fractures present significant challenges for orthopaedic surgeons. Current surgical procedures involve the reconstruction and mechanical stabilisation of complex fractures using metal hardware (i.e., wires, plates and screws). However, these procedures often result in poor healing. An injectable, biocompatible, biodegradable bone adhesive that could glue bone fragments back together would present a highly attractive solution. A bone adhesive that meets the many clinical requirements for such an application has yet to be developed. While synthetic and biological polymer-based adhesives (e.g., cyanoacrylates, PMMA, fibrin, etc.) have been used effectively as bone void fillers, these materials lack biomechanical integrity and demonstrate poor injectability, which limits the clinical effectiveness and potential for minimally invasive delivery. This systematic review summarises conventional approaches and recent developments in the area of bone adhesives for orthopaedic applications. The required properties for successful bone repair adhesives, which include suitable injectability, setting characteristics, mechanical properties, biocompatibility and an ability to promote new bone formation, are highlighted. Finally, the potential to achieve repair of challenging bone voids and fractures as well as the potential of new bioinspired adhesives and the future directions relating to their clinical development are discussed.

Inherent and Composite Hydrogels as Promising Materials to Limit Antimicrobial Resistance

Antibiotic resistance has increased significantly in the recent years, and has become a global problem for human health and the environment. As a result, several technologies for the controlling of health-care associated infections have been developed over the years. Thus, the most recent findings in hydrogel fabrication, particularly antimicrobial hydrogels, could offer valuable solutions for these biomedical challenges. In this review, we discuss the most promising strategies in the development of antimicrobial hydrogels and the application of hydrogels in the treatment of microbial infections. The latest advances in the development of inherently and composite antimicrobial hydrogels will be discussed, as well as hydrogels as carriers of antimicrobials, with a focus on antibiotics, metal nanoparticles, antimicrobial peptides, and biological extracts. The emergence of CRISR-Cas9 technology for removing the antimicrobial resistance has led the necessity of new and performant carriers for delivery of the CRISPR-Cas9 system. Different delivery systems, such as composite hydrogels and many types of nanoparticles, attracted a great deal of attention and will be also discussed in this review.

PEG-α-CD/AM/liposome @amoxicillin double network hydrogel wound dressing-Multiple barriers for long-term drug release

Wound infection and poor wound healing are the major challenges of wound treatment. Antibiotic drug treatment is the effective way to inhibit wound infection. It is necessary to achieve sustained release of antibiotics to get a longer treatment for wound infection. The double network hydrogels based on liposome, polyethylene glycol (PEG), α- cyclodextrin (α-CD) and acrylamide (AM) were developed, in which liposome acts as amoxicillin repository. Because the drug would release from the multiple barriers including two cavities of liposome and α-CD, as well as polyethylene glycol -α- cyclodextrin/acrylamide (PEG-CD/AM) double network, the PEG-α-CD/AM/liposome @amoxicillin double network hydrogels could achieve sustained drug release. The drug release assay showed that the dressing could release amoxicillin continuously until 12 days, than that of 8th day for single-network hydrogel releasing. The antibacterial ratio of the hydrogel could reach above 80%. What's more, the hydrogels present adjustable mechanical strength by changing the ratio of the components. The swelling ratio proved that the hydrogel had potential ability to absorb wound exudates. The cytotoxicity test of the hydrogels demonstrated excellent biocompatibility. These results indicated that this study can provide a new thought for antibacterial wound dressing and has a broad application prospect.

Chitosan/polydopamine layer by layer self-assembled silk fibroin nanofibers for biomedical applications

Silk fibroin (SF) is increasingly needed in tissue engineering for its superior biocompatibility. However, the practical applications of pure SF biomaterials confront bacterial infection problems. In this study, chitosan (CS) and polydopamine (PDA) were introduced into electrospun nanofibrous SF mats through layer-by-layer self-assembly (LBL) to obtain enhanced antibacterial ability and cytocompatibility. The surface morphology and composition analysis confirmed the successful deposition. After depositing 15 bilayers, the tensile modulus of the mats in wet condition increased from 2.16 MPa (pristine SF mats) to 4.89 MPa. A trend towards better hydrophilicity performance was also recorded with more bilayers coating on the mats. Besides, LBL structured mats showed improved antibacterial ability of more than 98 % against E. coli and S. aureus. In addition, advancement in biocompatibility was observed during the proliferation experiment of L929 cells. Overall, the deposition of CS and PDA may further expand the use of SF in biomedical field.

In-Situ Forming pH and Thermosensitive Injectable Hydrogels to Stimulate Angiogenesis: Potential Candidates for Fast Bone Regeneration Applications

Biomaterials that promote angiogenesis are required for repair and regeneration of bone. In-situ formed injectable hydrogels functionalised with bioactive agents, facilitating angiogenesis have high demand for bone regeneration. In this study, pH and thermosensitive hydrogels based on chitosan (CS) and hydroxyapatite (HA) composite materials loaded with heparin (Hep) were investigated for their pro-angiogenic potential. Hydrogel formulations with varying Hep concentrations were prepared by sol-gel technique for these homogeneous solutions were neutralised with sodium bicarbonate (NaHCO3) at 4 °C. Solutions (CS/HA/Hep) constituted hydrogels setting at 37 °C which was initiated from surface in 5-10 minutes. Hydrogels were characterised by performing injectability, gelation, rheology, morphology, chemical and biological analyses. Hydrogel solutions facilitated manual dropwise injection from 21 Gauge which is highly used for orthopaedic and dental administrations, and the maximum injection force measured through 19 G needle (17.191 ± 2.296N) was convenient for manual injections. Angiogenesis tests were performed by an ex-ovo chick chorioallantoic membrane (CAM) assay by applying injectable solutions on CAM, which produced in situ hydrogels. Hydrogels induced microvascularity in CAM assay this was confirmed by histology analyses. Hydrogels with lower concentration of Hep showed more efficiency in pro-angiogenic response. Thereof, novel injectable hydrogels inducing angiogenesis (CS/HA/Hep) are potential candidates for bone regeneration and drug delivery applications.

Antibacterial Hydrogels

Antibacterial materials are recognized as important biomaterials due to their effective inhibition of bacterial infections. Hydrogels are 3D polymer networks crosslinked by either physical interactions or covalent bonds. Currently, hydrogels with an antibacterial function are a main focus in biomedical research. Many advanced antibacterial hydrogels are developed, each possessing unique qualities, namely high water swellability, high oxygen permeability, improved biocompatibility, ease of loading and releasing drugs, and structural diversity. Here, an overview of the structures, performances, mechanisms of action, loading and release behaviors, and applications of various antibacterial hydrogel formulations is provided. Furthermore, the prospects in biomedical research and clinical applications are predicted.

Bone Response to Porous Poly(methyl methacrylate) Cement Loaded with Hydroxyapatite Particles in a Rabbit Mandibular Model

The aim of the current study was to evaluate bone formation and tissue response to porous poly(methyl methacrylate) (PMMA) cement with or without hydroxyapatite (HA) in a rabbit mandibular model. Therefore, 14 New Zealand White rabbits were randomly divided into two groups of seven according to the designed study end points of 4 and 12 weeks. For each rabbit, two decorticated defects (6 mm in height and 10 mm in width for each) were prepared at both sides of the mandible. Subsequently, the defects were filled with, respectively, porous PMMA and porous PMMA-HA cement. After reaching the designated implantation period, the rabbits were euthanized and the mandibles were retrieved for histological analysis. Results showed that both porous PMMA and porous PMMA-HA supported bone repair. Neither of the bone cements caused significant inflammation to nerve or other surrounding tissues. After implantation of 12 weeks, majority of the porosity was filled with newly formed bone for both cements, which supports the concept that a porous structure within PMMA can enhance bone ingrowth. Histomorphometrical evaluation, using histological grading scales, demonstrated that, at both implantation times, the presence of HA in the PMMA enhanced bone formation. Bone was always in direct contact with the HA particles, while intervening fibrous tissue was present at the PMMA-bone interface. On the basis of results, it was concluded that injectable porous PMMA-HA cement might be a good candidate for craniofacial bone repair, which should be further evaluated in a more clinically relevant large animal model.

Synthesis and characterization of an injectable and self-curing poly(methyl methacrylate) cement functionalized with a biomimetic chitosan–poly(vinyl alcohol)/nano-sized hydroxyapatite/silver hydrogel

Preparation and characterizations of injectable p-PMMA/CS–PVA/Nano-HA/Ag⁺ cements.