Efficient removal of dyes from dyeing wastewater by powder activated charcoal/titanate nanotube nanocomposites: adsorption and photoregeneration

Effective removal of dyes has been widely investigated by the adsorption of powder activated carbon and photodegradation by titanate nanotubes (TNTs). In this study, a facile one-step alkaline-hydrothermal method was applied to synthesize powder activated charcoal-supported TNTs (TNTs@PAC). Adsorption of three representative dyes, i.e., cationic methylene blue (MB), cationic rhodamine B (RhB), and anionic methyl orange (MO), onto TNTs@PAC was evaluated by the adsorption kinetic experiments and adsorption isotherms. The first 30 min is the main time phase of adsorption, and MB, RhB, and MO obtained the experimental equilibrium uptake of 173.30, 115.06, and 106.85 mg/g, respectively, indicating their final removal efficiencies of 100%, 69.36%, and 64.11%, respectively. The increase of pH value reduced adsorption capacity of MO (from 149.35 mg/g at pH of 2 to 96.99 mg/g at pH of 10), but facilitated MB adsorption, which was attributed to the charge distribution on the surface of TNTs@PAC and the charge of dyes at different pH. Furthermore, good capacity recoveries of MB by TNTs@PAC (> 99%) were observed after UV irradiation treatment, indicating the used TNTs@PAC can be easily recycled for the adsorption of MB by UV irradiation. Overall, TNTs@PAC is an effective process for remediation of dye-contaminated water because of its adsorption performance for all selected dyes and good regeneration capacity for MB.

Kinetic, Isotherm, and Thermodynamic Studies for Ag(I) Adsorption Using Carboxymethyl Functionalized Poly(glycidyl methacrylate)

Industrial wastewater contains large amounts of silver ions. Here, a new adsorbent was synthesized by functionalizing poly(glycidyl methacrylate) with carboxymethyl groups. The adsorbent was used to recover Ag(I) in wastewater. Fourier transform infrared spectroscopy, zeta potential, scanning electron microscopy, and X-ray photoelectron spectroscopy were used to characterize the adsorbent. The experimental parameters affecting the adsorption are solution pH, contact time, and initial silver ion concentration. The optimum pH for adsorption of Ag(I) is pH 4. The maximum adsorption capacity at pH 4 is 157.05 mg/g, and the adsorption reaches equilibrium at 300 min. The kinetics and isotherms of the adsorption process were described by pseudo second-order, Langmuir and D-R models, respectively. The adsorption process was a single layer chemical adsorption, exothermic, feasible, and spontaneous. The adsorption mechanism is electrostatic or chelation. The adsorbent selectively absorbed Ag(I) from coexisting ions (Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺). Finally, the removal rate of silver ions decreased from 79.29% to 65.01% after four repetitive experiments, which proved that the adsorbent had good reusability. The adsorbent has great potential benefit in removing Ag(I).

An Unconventional Polymerization Route to Hydrophilic Fluorescent Organic Nanoparticles for Multicolor Cellular Bioimaging

We demonstrated an unconventional polymerization route to synthesize hydrophilic fluorescent organic nanoparticles (FONs) for multicolor cellular bioimaging in this contribution. The route benefits from our unexpected discovery of a rapid polymerization reaction between 1,6-hexanediol dipropiolate and 2,4,6-triazide-1,3,5-triazine under the catalysis of N,N,N',N'',N''-pentamethyldiethylenetriamine (PMDETA). Interestingly, the 2,4,6-triazide-1,3,5-triazine and PMDETA system can also induce rapid free radical polymerization at room temperature. The as-prepared FONs exhibited promising water solubility and stability with an average diameter of 20 nm. The excitation wavelength-dependent fluorescent properties endow the FONs with blue, yellow, and red fluorescent emission under UV, blue, and green excitation, respectively. The cytotoxicity of FONs was investigated by using a Cell Counting Kit (CCK-8) assay, which indicated good biocompatiblity. More importantly, the cell uptake experiment verified the FONs were excellent fluorescent nanoprobes for multicolor cellular bioimaging. Therefore, this unconventional route provides a novel fabrication strategy of highly hydrophilic FONs for biomedical applications.

Surface Chemistry and Nano-/Microstructure Engineering on Photocatalytic In2S3 Nanocrystals

Colloidal nanocrystals (NCs) compete with molecular catalysts in the field of homogenous catalysis, offering easier recyclability and a number of potentially advantageous functionalities, such as tunable band gaps, plasmonic properties, or a magnetic moment. Using high-throughput printing technologies, colloidal NCs can also be supported onto substrates to produce cost-effective electronic, optoelectronic, electrocatalytic, and sensing devices. For both catalytic and technological application, NC surface chemistry and supracrystal organization are key parameters determining final performance. Here, we study the influence of the surface ligands and the NC organization on the catalytic properties of In₂S₃, both as a colloid and as a supported layer. As a colloid, NCs stabilized by inorganic ligands show the highest photocatalytic activities, which we associate with their large and more accessible surfaces. On the other hand, when NCs are supported on a substrate, their organization becomes an essential parameter determining performance. For instance, NC-based films produced through a gelation process provided five-fold higher photocurrent densities than those obtained from dense films produced by the direct printing of NCs.

Synthesis and Evaluation of 8-Aminoquinoline-Grafted Poly(glycidyl methacrylate) for the Recovery of Pd(II) from Highly Acidic Aqueous Solutions

A new adsorbent was prepared via modified poly(glycidyl methacrylate) with 8-aminoquinoline (AQ-PGMA) for the recovery of Pd(II) from solution. The practical application values of AQ-PGMA, including efficiency, selectivity and reusability for the recovery of Pd(II), are proved by the various experiment parameters. The parameters include HCl concentration, adsorption time, initial Pd(II) concentration, coexisting ions and reused cycles. The prepared AQ-PGMA showed a high adsorbing capacity for Pd(II) (up to 267.90 mg/g) when the concentration of HCl is higher than 0.4 mol/L. The analysis of the adsorption process indicated that the adsorption kinetics followed a pseudo-second-order kinetic model and the adsorption isotherms obeyed the Hill model. The Hill model showed that one adsorption site on the AQ-PGMA could combine 1.45 Pd(II). In addition, the obtained adsorbent demonstrated good regenerative ability and satisfying selectivity for the recovery of Pd(II). The adsorption mechanism was dominated by the chelation and ion exchange reactions between amines/hydroxyl groups and Pd(II). The experiments confirmed that AQ-PGMA was efficient for recovery of Pd(II) from highly acidic aqueous solutions.

Nanosilica-supported thiosemicarbazide–glutaraldehyde polymer for selective Au(iii) removal from aqueous solution

A thiosemicarbazide/nanosilica composite exhibited significant uptake toward Au(iii). Adsorption isotherms and kinetics revealed a synergistic effect of ionic interaction and chelation exists between Au(iii) and the synthesized nanocomposites.

Selective removal of cationic micro-pollutants using disulfide-linked network structures

Micropollutants are found in all water sources, even after thorough treatments that include membrane filtration. We have developed swellable di-sulfide covalent organic polymers (COPs) with great affinity towards cationic textile micropollutants.

Copper loaded on activated carbon as an efficient adsorbent for removal of methylene blue

Copper loaded activated carbon (Cu-AC) was prepared by impregnating it with cupric nitrate followed by microwave heating and then used for removing dyes in wastewater.