Reliable impedance analysis of Li-ion battery half-cell by standardization on electrochemical impedance spectroscopy (EIS)

Electrochemical impedance spectroscopy (EIS) is a powerful characterization technique for the in-depth investigation of kinetic/transport parameters detection, reaction mechanism understanding, and degradation effects exploration in lithium-ion battery (LIB) systems. However, due to the lack of standardized criterion/paradigm, severe misinterpretations occur frequently during an EIS measurement. In this paper, the significance of instrumental accuracy is described and the character/principle of selection on the simulation model is illuminated/proposed, showing that an adequate precision device and an appropriate fitting model are a prerequisite for a correct EIS analysis. Moreover, the drawbacks of conventional two-electrode EIS experiments for typical coin-type cells are rigorously pointed out by comparison with the ideal three-electrode configuration, where the real impedance information of the cathode would be masked by the sum of both the anode film resistance response and the unavoidable inductive loop signal. The three-electrode case enables efficient accurate observations on individual electrodes, thus facilitating abundant and useful information acquisition. Consequently, devices with a sufficient accuracy, rational simulation models, and advanced three-electrode cells are distinctly illustrated as standardized criterion/paradigm for EIS characterizations, which are essentially important for electrode and interface modifications in LIBs.

Transition anionic complex in trihexyl(tetradecyl)phosphonium-bis(oxalato)borate ionic liquid - revisited

It was found that Li[BOB]·nH2O salts were not readily suitable for the synthesis of high-purity orthoborate-based tetraalkylphosphonium ionic liquids, as exemplified here for trihexyl(tetradecyl)phosphonium bis(oxalato)borate, [P6,6,6,14][BOB]; along with [BOB]-, a metastable transition anionic complex (TAC) of dihydroxy(oxalato)borate with oxalic acid, [B(C2O4)(OH)2·(HOOC-COOH)]-, was also formed and passed into the ionic liquid in the course of the metathesis reaction with trihexyl(tetradecyl)phosphonium chloride. On the contrary, Na[BOB] was found to be a more suitable reagent for the synthesis of this IL, because [BOB]- anions safely passed into the final IL without hydrolysis, when metathesis reactions were performed using aqueous-free media. Since ultra-pure Na[BOB] is not commercially available, in this work, a preparation protocol for ultra-pure (>99%) Na[BOB] was developed: (i) molar ratios of boric and oxalic acids were optimised to minimise boron-containing impurities, (ii) the Na[BOB] product was thoroughly purified by sequential washing of a fine powder product in hot acetonitrile and ethanol and (iii) characterised using powder X-ray diffraction and solid-state 11B MAS NMR spectroscopy. The physico-chemical properties of the prepared boron-impurity-free IL, i.e., its density, viscosity, electric conductivity, glass-transition temperature and thermal stability, were found to be significantly different from those of the previously reported [P6,6,6,14][BOB], containing ca. 45 mol% of TAC, [B(C2O4)(OH)2·(HOOC-COOH)]-. It was found that a high-purity [P6,6,6,14][BOB] prepared in this work has a considerably lower viscosity, a higher viscosity index and a wider electro-chemical window (ECW) compared to those of the sample of [P6,6,6,14][BOB] with ca. 45 mol% of TAC. Interestingly, [B(C2O4)(OH)2·(HOOC-COOH)]- in the latter sample almost completely transformed into [BOB]- anions upon heating of the IL sample at 413 K for 1 hour, as confirmed using both 11B and 13C NMR. Therefore, in this work, apart from a well-optimised synthetic protocol for boron-impurity-free [P6,6,6,14][BOB], implications of boron-containing transition anionic complexes in tetraalkylphosphonium-orthoborate ILs used in different applications were highlighted.