Yellow to blue switching of fluorescence by the tuning of the pentaphenylphosphole structure: phosphorus electronic state vs. ring conjugation

The interaction between diphenylacetylene and dichlorophenylphosphine under various conditions is a simple method for the preparation of pentaphenylphosphole derivatives exhibiting fluorescence properties. Depending on the electronic state of the various centers of the phospholic structure, it was possible to obtain molecules with fluorescence, as in the blue area for 1,2,3,4,5-pentaphenyl-2,5-dihydro-phosphole-1-oxide (H₂PPPO), in the yellow area for 1,2,3,4,5-pentaphenylphosphole-1-oxide (PPPO) and in the cyan area for 1,2,3,4,5-pentaphenylphosphole (PPP). The effect of the structure and π-conjugation on the optical properties of these compounds was studied using PPP derivatives as examples. Unusual changes in the optical properties of PPP derivatives in solution and in the crystalline state are explained. In the case of agglomeration of PPPO and PPP molecules, the effect of aggregation-induced emission (AIE) was observed to have weak fluorescence in solution and strong fluorescence in the aggregated state. However, for H₂PPPO, the AIE effect remains mild. With the help of experimental studies, supported by theoretical calculations, the main mechanism of the optical properties of pentaphenylphosphole derivatives has been revealed. It was observed that the intramolecular motions of PPPO and PPP are more limited in the solid state than the motions of H₂PPPO, which is associated with less conjugation of the phenyl rotors of H₂PPPO. The analysis of the structure and distribution of electron density showed why hydrogenation of the phosphole ring leads to a sharp change in the optical properties of pentaphenylphosphole derivatives, while the oxidation of phosphorus does not lead to the disappearance of the AIE effect and to a lesser extent affects the change in the fluorescence wavelength. Thus, it was shown how the regulation of various structural features of the phospholic ring helps to control the optical properties of such compounds.

PDA-PEI-Copolymerized Nanodots with Tailorable Fluorescence Emission and Quenching Properties for the Sensitive Ratiometric Fluorescence Sensing of miRNA in Serum

Dopamine and polyethyleneimine (PEI) copolymerized nanodots (PDA-PEI nanodots) with both fluorescence emission and quenching features were synthesized by a simple one-step reaction at room temperature. By adjusting the dopamine and PEI ratio as well as the chain length of PEI, the fluorescence emission and quenching properties of PDA-PEI nanodots can be controlled well. Under optimal conditions, the nanodots showed strong green fluorescence emission with an absolute quantum yield of 1-2% and a quenching efficiency of more than 99% to several fluorophores with emission wavelengths ranging from blue to red light regions. The nanodots with a large number of functional groups also showed strong affinity to nucleic acid strands, excellent solubility in aqueous solution, long-term stability, and uniform size distribution. Integrating these attractive features with the specific enzymatic digestion reaction of the DSN enzyme, a highly sensitive ratiometric fluorescence nanoprobe for miRNA analysis was developed. Aminomethylcoumarin acetate (AMCA), which possesses the same excitation wavelength but a well-resolved blue fluorescence emission with PDA-PEI nanodots, was selected as the signal-reporting unit for capture probe labeling, while the inherent green fluorescence of PDA-PEI nanodots served as the reference. According to the ratiometric fluorescence signal, the ratiometric fluorescence nanoprobes showed high sensitivity and good accuracy for the miRNA assay. Because of the high and universal quenching efficiency, stable fluorescence emission, easily assembled interface, and uniform morphology, the nanodots may have great application prospects to serve as a universal nanoplatform for the fabrication of ratiometric fluorescence nanoprobes.

Bumpy Roads Lead to Beautiful Places: The Twists and Turns in Developing a New Class of PN-Heterocycles

The Haley and Johnson labs at the University of Oregon have been collaborating since 2006, combining skillsets in synthetic organic, physical organic, and supramolecular chemistries. This joint project has produced many examples of host molecules that bind anionic guests and give chemical, photophysical, and/or electrical responses. Many of these receptors utilize two-armed arylethynyl backbones that have a variety of hydrogen- or halogen-bonding functional groups appended. However, in attempts to produce a bisamide-containing host using a peptide-coupling protocol with P(OPh)3 present, we isolated something unexpected – a heterocycle containing neighboring P and N atoms. This ‘failed’ reaction turned into a surprisingly robust synthesis of phosphaquinolinones, an unusual class of PN-heterocycles. This Account article tells the rollercoaster story of these heterocycles in our lab. It will highlight our key works to this field, including a suite of fundamental studies of both the original PN-naphthalene moiety, as well as a variety of structural modifications to the arene backbone. It will also discuss the major step forward the project took when we developed a phosphaquinolinone-containing receptor molecule capable of binding HSO4 – selectively, reversibly, and with recyclability. With these findings, the project has gone from hospice care to making a full, robust recovery.

1 Introduction

2 Initial Discovery

3 Setbacks Breathe New Life

4 A New Dynamic Duo Develops Dozens of Derivatives

5 Physicochemical Characterization

5.1 Fluorescence

5.2 Molecular Structures

5.3 Solution Dimerization Studies

6 Applying What We Have Learned

6.1 Development of Supramolecular Host

6.2 Use of PN Moiety as an Impressive Fluorophore

7 Conclusions and Outlook

Visible-light-driven metal-free aerobic synthesis of highly diastereoselective phosphinoylpyrroloindoles

A tandem C–P and C–C bond formation promoted by visible light at room temperature in a highly diastereoselective manner is described.

Phosphindole fused pyrrolo[3,2-b]pyrroles: a new single-molecule junction for charge transport

A new family of phosphindole fused ladder-type heteroacenes with a pyrrolo[3,2-b]pyrrole core were synthesized and characterized, which show good luminescence efficiency, high thermostability and tunable conductance.

Synthesis of 1,3-Azaphospholes with Pyrrolo[1,2- a]quinoline Skeleton and Their Optical Applications

A facile synthesis of 1,3-azaphospholes with a pyrrolo[1,2- a]quinoline skeleton has been described. These new annulated 1,3-azaphospholes exhibit good photoelectric performance and can be used as the emitting dopant in organic light-emitting diodes (OLEDs) and dye for bioimaging.

Recent progress in the synthesis of phosphorus-containing indole derivatives

Phosphorus-containing indole derivatives represent a special class of phosphorus-containing nitrogen heterocycles. This review summarizes the recent progress in the synthesis of such compounds, briefly discusses the reaction mechanisms and challenges, and outlines the synthetic opportunities still open.

Synthesis and photophysical properties of novel benzophospholo[3,2-b]indole derivatives

The parent benzophospholo[3,2-b]indole was prepared by the reaction of dichlorophenylphosphine with a dilithium intermediate, which was prepared in two steps from 2-ethynyl-N,N-dimethylaniline. Using the obtained benzophosphole-fused indole as a common starting material, simple modifications were carried out at the phosphorus center of the phosphole, synthesizing various functionalized analogs. The X-ray structure analysis of trivalent phosphole and phosphine oxide showed that the fused tetracyclic moieties are planar. The benzophosphole-fused indoles, such as phosphine oxide, phospholium salt, and borane complex, exhibited strong photoluminescence in dichloromethane (Φ = 67–75%).

Supramolecular assembly of a phosphole-based moiety into nanostructures dictated by alkynylplatinum(ii) terpyridine complexes through non-covalent Pt···Pt and π-π stacking interactions: synthesis, characterization, photophysics and self-assembly behaviors

A new class of platinum(ii) terpyridine complexes with a phosphole-derived bridging alkynyl ligand have been prepared. The X-ray crystal structure of complex 2 has been determined, and reveals a polymeric zig-zag chain structure with the existence of π-π stacking interactions. The photophysical properties have also been studied, with 3MLCT/3LLCT phosphorescence exhibited in degassed CH2Cl2; the energy of which is varied by the π-conjugation of the terpyridine ligands. The solvent-induced assembly of complex 1 has been studied. The incorporation of hydrophobic hydrocarbon chains has been shown to play an important role in assisting the formation of self-assembled nanostructures via Pt···Pt, π-π stacking and hydrophobic-hydrophobic interactions. It has been established that an isodesmic growth mechanism operates in polar media to give nanospheres, while fibrous networks originate from the self-assembly of the complexes in non-polar media, predominantly driven by π-π stacking interactions.

π-Conjugated phospholes and their incorporation into devices: components with a great deal of potential

This review serves as a brief introduction to phospholes and discusses their unique favorable properties for application in organic electronic materials. Over the past several years, π-conjugated phospholes have been slowly making their way into devices. We report here the mode of synthesis of these π-conjugated phospholes as well as discuss the performances of the devices.

Phosphorus and silicon-bridged stilbenes: synthesis and optoelectronic properties

Blue light-emitting phosphorus and silicon-bridged stilbenes have been synthesized and characterized.