Trimetallic Oxide Foam as an Efficient Catalyst for Fixation of CO2 into Oxazolidinone: An Experimental and Theoretical Approach

The excess anthropogenic CO₂ depletion via the catalytic approach to produce valuable chemicals is an industrially challenging, demanding, and encouraging strategy for CO₂ fixation. Herein, we demonstrate a selective one-pot strategy for CO₂ fixation into "oxazolidinone" by employing stable porous trimetallic oxide foam (PTOF) as a new catalyst. The PTOF catalyst was synthesized by a solution combustion method using transition metals Cu, Co, and Ni and systematically characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), N₂ sorption, temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS) analysis. Due to the distinctive synthesis method and unique combination of metal oxides and their percentage, the PTOF catalyst displayed highly interconnected porous channels along with uniformly distributed active sites on its surface. Well ahead, the PTOF catalyst was screened for the fixation of CO₂ into oxazolidinone. The screened and optimized reaction parameters revealed that the PTOF catalyst showed highly efficient and selective activity with 100% conversion of aniline along with 96% selectivity and yield toward the oxazolidinone product at mild and solvent-free reaction conditions. The superiority of the catalytic performance could be due to the presence of surface active sites and acid-base cooperative synergistic properties of the mixed metal oxides. A doubly synergistic plausible reaction mechanism was proposed for the oxazolidinone synthesis experimentally with the support of DFT calculations along with bond lengths, bond angles, and binding energies. In addition, stepwise intermediate formations with the free energy profile were also proposed. Also, the PTOF catalyst displayed good tolerance toward substituted aromatic amines and terminal epoxides for the fixation of CO₂ into oxazolidinones. Very interestingly, the PTOF catalyst could be significantly reused for up to 15 consecutive cycles with stable activity and retention in physicochemical properties.

Facile preparation of a cobalt diamine diketonate adduct as a potential vapor phase precursor for Co3O4films

Co3O4 thin films and nanosystems are implemented in a broad range of functional systems, including gas sensors, (photo)catalysts, and electrochemical devices for energy applications. In this regard, chemical vapor deposition (CVD) is a promising route for the fabrication of high-quality films in which the precursor choice plays a key role in the process development. In this work, a heteroleptic cobalt complex bearing fluorinated diketonate ligands along with a diamine moiety [Co(tfa)2·TMEDA; tfa = 1,1,1-trifluoro-2,4-pentanedionate and TMEDA = N,N,N',N'-tetramethylethylenediamine] is investigated as a potential Co molecular precursor for the CVD of Co3O4 systems. For the first time, the compound is characterized by crystal structure determination and comprehensive analytical studies, focusing also on its thermal properties and fragmentation patterns, important figures of merit for a CVD precursor. The outcomes of this investigation, accompanied by detailed theoretical studies, highlight its very favorable properties for CVD applications. In fact, growth experiments under oxygen atmospheres containing water vapor revealed the suitability of Co(tfa)2·TMEDA for the fabrication of high-quality, phase-pure Co3O4 thin films. The versatility of the proposed strategy in tailoring Co3O4 structural/morphological features highlights its potential to obtain multi-functional films with controllable properties for a variety of eventual technological end-uses.

ZnO Metal Oxide Semiconductor in Surface Acoustic Wave Sensors: A Review

Surface acoustic wave (SAW) gas sensors are of continuous development interest to researchers due to their sensitivity, short detection time, and reliability. Among the most used materials to achieve the sensitive film of SAW sensors are metal oxide semiconductors, which are highlighted by thermal and chemical stability, by the presence on their surface of free electrons and also by the possibility of being used in different morphologies. For different types of gases, certain metal oxide semiconductors are used, and ZnO is an important representative for this category of materials in the field of sensors. Having a great potential for the development of SAW sensors, the discussion related to the development of the sensitivity of metal oxide semiconductors, especially ZnO, by the synthesis method or by obtaining new materials, is suitable and necessary to have an overview of the latest results in this domain.

CoOx nanoparticles embedded in porous graphite carbon nanofibers derived from electrospun polyacrylonitrile@polypyrrole core–shell nanostructures for high-performance supercapacitors

A novel composite nanostructure of C–CoO_x–C with CoO_x nanoparticles embedded in N-containing porous graphite carbon nanofibers exhibited a more acceptable specific capacitance, higher rate capability and better cycling stability.