Analysis of the Anti-Corrosion Performance of Dextrin and Its Graft Copolymer on J55 Steel in Acid Solution

This paper studies the corrosion inhibition performance and mechanism of dextrin (Dxt) and its graft copolymer with caprolactam (Dxt-g-CPL) on J55 steel in 1 M HCl solution. Caprolactam is grafted and copolymerized with dextrin by a chemical synthesis method, to obtain a dextrin graft copolymer corrosion inhibitor. The composition of the synthesized graft copolymer was characterized by FTIR to identify whether the grafting was successful. Through weightlessness, electrochemical impedance spectroscopy (EIS), potentiodynamic polarization curve (TAFEL), scanning electrochemical microscope (SECM), scanning electron microscope (SEM), and contact angle experiments, the graft copolymer to J55 steel in 1 M HCl solution and the corrosion inhibition performance were evaluated. Moreover, we discuss its corrosion inhibition mechanism. The dextrin graft copolymer has good corrosion inhibition performance for J55 in 1 M HCl solution. When the concentration of the corrosion inhibitor increases, the corrosion inhibition efficiency will also increase. At a certain concentration, when the temperature rises, the corrosion inhibition efficiency will gradually decrease. When the concentration is 300 mg/L, it has a better corrosion inhibition effect, and the corrosion inhibition efficiency is 82.38%. Potential polarization studies have shown that Dxt-g-CPL is a mixed corrosion inhibitor, which inhibits both the cathode and the anode of the electrode reaction. SEM, SECM, and contact angle analysis results show that Dxt-g-CPL can significantly inhibit corrosion. Compared with Dxt, Dxt-g-CPL has a better inhibitory effect.

Injectable hydrogels of newly designed brush biopolymers as sustained drug-delivery vehicle for melanoma treatment

Novel biocompatible and brush copolymers have been developed for cancer treatment using its controlled drug-release potential. Polyurethane graft on linear dextrin has been synthesized to control the hydrophilic-hydrophobic balance for regulated drug delivery. The properties of the graft copolymers have been tuned through graft density. The prepared grafts are thermally stable and mechanically strong. An injectable hydrogel has been developed by embedding the drug-loaded brush copolymers in methyl cellulose to better control the release for a prolonged period, importantly by keeping the drug release at a constant rate. Cellular studies indicate the biocompatible nature of the brush copolymers whose controlled and slow release of drug exhibit significant cytotoxic effects on cancer cells. Endocytosis of drug tagged contrast agent indicates greater transport of biologically active material inside cell as observed through cellular uptake studies. In vivo studies on melanoma mice exhibit the real efficacy of the controlled drug release from the injectable hydrogel with significant melanoma suppression without any side effects as opposed to severe toxic effects observed in conventional chemotherapy. Special application method of drug-loaded hydrogel just beneath the tumor makes this system incredibly effective through confinement. Thus, brush copolymer injectable hydrogel is a promising vehicle for control release of drug for cancer treatment in future.

In vivo systemic toxicity assessment of an oxidized dextrin-based hydrogel and its effectiveness as a carrier and stabilizer of granular synthetic bone substitutes

The worldwide incidence of bone disorders is raising, mainly due to aging population. The lack of effective treatments is pushing the development of synthetic bone substitutes (SBSs). Most ceramic-based SBSs commercially available display limited handling properties. Attempting to solve these issues and achieve wider acceptance by the clinicians, granular ceramics have been associated with hydrogels (HGs) to produce injectable/moldable SBSs. Dextrin, a low-molecular-weight carbohydrate, was used to develop a fully resorbable and injectable HG. It was first oxidized with sodium periodate and then cross-linked with adipic acid dihydrazide. The in vivo biocompatibility and safety of the dextrin-based HG was assessed by subacute systemic toxicity and skin sensitization tests, using rodent models. The results showed that the HG did not induce any systemic toxic effect, skin reaction, or genotoxicity, neither impaired the bone repair/regeneration process. Then, the HG was successfully combined with granular bone substitute, registered as Bonelike (250-500 μm) to obtain a moldable/injectable SBS, which was implanted in tibial fractures in goats for 3 and 6 weeks. The obtained results showed that HG allowed the stabilization of the granules into the defect, ensuring effective handling, and molding properties of the formulation, as well as an efficient cohesion of the granules. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1678-1689, 2019.

Biocompatible nanogel derived from functionalized dextrin for targeted delivery of doxorubicin hydrochloride to MG 63 cancer cells

The present article demonstrates the targeted delivery of doxorubicin hydrochloride to human osteosarcoma cancer cell lines (MG 63) using functionalized dextrin based crosslinked, pH responsive and biocompatible nanogel. The nanogel has been prepared through Michael-type addition reaction using dextrin (Dxt), N, N'-methylene bisacrylamide (MBA, as crosslinker), acrylic acid (AA, as monomer) and potassium persulfate (KPS, as initiator). The structure, composition, morphology of the nanogel have been explored using FTIR and ¹H NMR spectroscopy, XRD, TGA, DSC, CHN and AFM analyses. The TEM analysis confirmed that the size of nanogel appeared within 100nm, while DLS study indicates that the diameter of the nanogel remained between 113 and 126nm. The AFM study implied the porous morphology of the synthesized nanogel. The rheological study suggests the gel behaviour of the synthesized nanogel at 37±0.1°C. Difference in% swelling at pH 5.5 and 7.4 indicates pH-responsiveness of the nanogel. The in vitro cytocompatibility results ascertained that the nanogel is non-toxic to human mesenchymal stem cells (hMSCs). In vitro cellular uptake study confirmed that FITC-loaded nanogel can cross the cellular membrane and be well uptake by the cell cytoplasm. The nanogel could efficiently encapsulate doxorubicin hydrochloride (Dox) with the loading efficiency of 27±0.2% after 72h. The Dox-loaded nanogel demonstrates anti-cancer activity towards MG 63 cancer cells and release the encapsulated drug in a controlled way.

Dextrin and poly(lactide)-based biocompatible and biodegradable nanogel for cancer targeted delivery of doxorubicin hydrochloride

Herein, we report the development and application of a novel biocompatible, chemically crosslinked nanogel for use in anticancer drug delivery.