Electrospun Nanofibers Embedding ZnO/Ag2CO3/Ag2O Heterojunction Photocatalyst with Enhanced Photocatalytic Activity

The immobilization of photocatalyst onto substrate has a great potential for energy-intensive separation to avoid the costly separation process and unwanted release of photocatalyst into the treated water. In this study, electrospun nanofiber composed of polyvinylidene fluoride (PVDF) with the immobilized ZnO, ZnO/Ag2CO3, ZnO/Ag2CO3/Ag2O, and ZnO/Ag2O photocatalysts were prepared via the electrospinning process. The immobilized ZnO and heterojunctioned ZnO in the PVDF electrospun nanofiber were proven via X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The electrospinning allowed high chemical binding of the nanofiber composite with good physical interaction between the photocatalyst and the electrospun nanofiber. AFM images obtained for the nanofibers were found to be rougher than that of the pristine PVDF electrospun nanofiber. Among the photocatalyst embedded, the immobilized ZnO/Ag2CO3/Ag2O had endowed the nanofiber with an excellent photocatalytic activity and recyclability for the degradation of the RR120 under UV light irradiation. Based on the results, effective immobilization of ZnO/Ag2CO3/Ag2O in PVDF nanofiber with 99.62% photodegradation in 300 min compared to PVDF-ZnO, PVDF-ZnO/Ag2CO3, and PVDF-ZnO/Ag2O of 28.14%, 90.49%, and 96.34%, respectively. The effective ZnO/Ag2CO3/Ag2O immobilization into polymers with affinity toward organic dye pollutants could both increase the efficiency and reduce the energy requirements for water treatment via the photocatalytic application.

Photo-reduction of heavy metal ions and photo-disinfection of pathogenic bacteria under simulated solar light using photosensitized TiO2 nanofibers

We report the photosensitization of electrospun titania nanofibers, with a mean diameter of 195 nm, by low bandgap silver sulfide nanoparticles of 11-23 nm mean size with the aim of treating heavy metal ions and pathogenic bacteria simultaneously under simulated solar light irradiation. The 17 nm Ag2S/TiO2 nanofibers showed 90% photocatalytic reduction of Cr(vi) at pH of 3 with a pseudo-first order rate constant of 0.016 min-1 which is significantly better than the previously reported for Ag-Ag2S/TiO2 composite particles. The antibacterial capability of the Ag2S/TiO2 nanofibers was evaluated via photo-disinfection of the Gram-positive and Gram-negative bacterial strains. The smallest sized 11 nm Ag2S/TiO2 nanofiber showed the best bactericidal efficiency of 100% and 90.6% against Gram-negative E. coli and Gram-positive S. aureus after 1 h of irradiation, respectively, whereas, only 50% E. coli and 41% S. aureus were found to be inactivated in dark. Furthermore, a UV-O3 treatment of the 11 nm Ag2S/TiO2 nanofibers remarkably enhanced the antibacterial activity where 89% E. coli and 81% S. aureus were inactivated in just 10 min of the irradiation. Enhanced photocatalytic activity is attributed to the efficient charge separation and transfer and reduced electron-hole recombination induced by the effective heterojunction formation between TiO2 and the optimally sized Ag2S nanoparticles. The disinfection nature of the Ag2S nanoparticles, role of the generated hydroxyl species under irradiation, and the cell wall damage mechanism is also discussed. This study demonstrates the potential use of these multifunctional composite TiO2 nanofibers for water remediation.

Synthesis, Morphologies and Building Applications of Nanostructured Polymers

Nanostructured polymers (NSPs) are polymeric materials in the size of nanoscale, normally consisting of nanoparticles, nanofibers, nanowires, nanospheres and other morphologies. Polymer nanoparticles (PNPs) can be fabricated either by physical methods (i.e., solvent evaporation, nanoprecipitation, salting out) or by direct nanosynthesis, using micro- or nanoemulsions with nanoreactor compartments to perform polymerization. Polymer nanofibers (PNFs) can be produced via various techniques and the most commonly used approach is electrospinning, whereby a charged solution of a polymer when exposed to an opposite high electric field is pulled into long thin nanofibers. NSPs in general exhibit enhanced properties such as excellent structural and mechanical properties, making them promising candidates for some particular building applications. A variety of PNFs have been developed and used for noise and air pollution filtration. Moreover, PNFs can also be fabricated with phase change materials which are usually employed for thermal energy storage in construction industry. In this review, we will summarize the morphologies and nanosynthesis methods of NSPs, in particular, PNPs and PNFs. In addition, representative NSPs mainly used in construction are introduced for building applications.

Photosensitization of TiO2 nanofibers by Ag2S with the synergistic effect of excess surface Ti3+ states for enhanced photocatalytic activity under simulated sunlight

TiO₂ nanofibers, with mean diameter ~200 nm, were fabricated by electrospinning and successfully photosensitized with low bandgap Ag₂S nanoparticles of 11, 17, 23 and 40 nm mean sizes, with corresponding loading of 4, 10, 18 and 29 wt.% Ag₂S, respectively. 17 nm Ag₂S@TiO₂ nanofibers exhibited optimal activity in the photodegradation of methylene blue under simulated sunlight with pseudo-first order rate constant of 0.019 min⁻¹ compared to 0.009 min⁻¹ for pure TiO₂ nanofibers. In spite of greater visible-light absorption and reduced bandgap, larger than 17 nm Ag₂S nanoparticles exhibited sluggish photodegradation kinetics probably due to less photo-induced carriers generation in TiO₂ and reduced electron injection rates from the larger sized Ag₂S into TiO₂. Furthermore, a UV-O₃ surface treatment induced excess Ti³⁺ surface states and oxygen vacancies which synergistically enhanced the photodegradation rate constant to 0.030 min⁻¹ for 17 nm Ag₂S@TiO₂ sample which is ~70% better than the previously reported for Ag₂S/TiO₂ hierarchical spheres. This was attributed to the efficient charge separation and transfer driven by increased visible-light absorption, bandgap narrowing and reduced electron-hole recombination rates. The present study demonstrate the potential utilization of Ag₂S@TiO₂ nanofibers in filtration membranes for removal of organic pollutants from wastewater.