Embedded 3D bioprinting - An emerging strategy to fabricate biomimetic & large vascularized tissue constructs

Three-dimensional bioprinting is an advanced tissue fabrication technique that allows printing complex structures with precise positioning of multiple cell types layer-by-layer. Compared to other bioprinting methods, extrusion bioprinting has several advantages to print large-sized tissue constructs and complex organ models due to large build volume. Extrusion bioprinting using sacrificial, support and embedded strategies have been successfully employed to facilitate printing of complex and hollow structures. Embedded bioprinting is a gel-in-gel approach developed to overcome the gravitational and overhanging limits of bioprinting to print large-sized constructs with a micron-scale resolution. In embedded bioprinting, deposition of bioinks into the microgel or granular support bath will be facilitated by the sol-gel transition of the support bath through needle movement inside the granular medium. This review outlines various embedded bioprinting strategies and the polymers used in the embedded systems with advantages, limitations, and efficacy in the fabrication of complex vascularized tissues or organ models with micron-scale resolution. Further, the essential requirements of support bath systems like viscoelasticity, stability, transparency and easy extraction to print human scale organs are discussed. Additionally, the organs or complex geometries like vascular constructs, heart, bone, octopus and jellyfish models printed using support bath assisted printing methods with their anatomical features are elaborated. Finally, the challenges in clinical translation and the future scope of these embedded bioprinting models to replace the native organs are envisaged.

Development and Prospect of Esophageal Tissue Engineering

Currently, patients with esophageal cancer, especially advanced patients, usually use autologous tissue for esophageal alternative therapy. However, an alternative therapy is often accompanied by serious complications such as ischemia and leakage, which seriously affect the prognosis of patients. Tissue engineering has been widely studied as one of the ideal methods for the treatment of esophageal cancer. In view of the complex multi-layer structure of the natural esophagus, how to use the tissue engineering method to design the scaffold with structure and function matching with the natural tissue is the principle that the tissue engineering method must follow. This article will analyze and summarize the construction methods, with or without cells, and repair effects of single-layer scaffold and multi-layer scaffold. Especially in the repair of full-thickness and circumferential esophageal defects, the flexible design method and the binding force between the layers of the scaffold are very important. In short, esophageal tissue engineering technology has broad prospects and plays a more and more important role in the treatment of esophageal diseases.

Mechanical stimuli enhance simultaneous differentiation into oesophageal cell lineages in a double-layered tubular scaffold

The tissue-engineered oesophagus serves as an alternative and promising therapeutic approach for long-gap oesophageal replacement. This study proposes an advanced in vitro culture platform focused on construction of the oesophagus by combining an electrospun double-layered tubular scaffold, stem cells, biochemical reagents, and biomechanical factors. Human mesenchymal stem cells were seeded onto the inner and outer surfaces of the scaffold. Mechanical stimuli were applied with a hollow organ bioreactor along with different biochemical reagents inside and outside of the scaffold. Electrospun fibres in a tubular scaffold were found to be randomly and circumferentially oriented for the inner and outer surfaces, respectively. Amongst the two types of mechanical stimuli, the intermittent shear flow that can simultaneously cause circumferential stretching due to hydrostatic pressure, and shear stress caused by flow on the inner surface, was found to be more effective for simultaneous differentiation into epithelial and muscle lineage than steady shear flow. Under these conditions, the expression of epithelial markers on the inner surface was significantly observed, although it was minimal on the outer surface. Muscle differentiation showed the opposite expression pattern. Meanwhile, the mechanical tests showed that the strength of the scaffold was improved after incubation for 14 days. We have developed a potential platform for tissue-engineered oesophagus construction. Specifically, simultaneous differentiation into epithelial and muscle lineages can be achieved by utilizing the double-layered scaffold and appropriate mechanical stimulation.

Electrospun Gelatin Fibers Surface Loaded ZnO Particles as a Potential Biodegradable Antibacterial Wound Dressing

Traditional wound dressings require frequent replacement, are prone to bacterial growth and cause a lot of environmental pollution. Therefore, biodegradable and antibacterial dressings are eagerly desired. In this paper, gelatin/ZnO fibers were first prepared by side-by-side electrospinning for potential wound dressing materials. The morphology, composition, cytotoxicity and antibacterial activity were characterized by using Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), particle size analyzer (DLS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), thermogravimetry (TGA) and Incucyte™ Zoom system. The results show that ZnO particles are uniformly dispersed on the surface of gelatin fibers and have no cytotoxicity. In addition, the gelatin/ZnO fibers exhibit excellent antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with a significant reduction of bacteria to more than 90%. Therefore, such a biodegradable, nontoxic and antibacterial fiber has excellent application prospects in wound dressing.

Optimizing the mechanical properties of a bi-layered knitted/nanofibrous esophageal prosthesis using artificial intelligence

The esophagus is a tubular multi-layer organ that carries the food bolus and liquids from the mouth to the stomach. Esophageal prostheses and scaffolds should have the appropriate mechanical and strain properties in the longitudinal and circumferential directions. A novel bi-layered esophageal prosthesis was produced using knitted tubular silk fabric and a coating of polyurethane (PU) nanofibers. The optimization process was performed in two steps. First, 12 different tubular structures of knitted silk fabrics were produced and mechanical properties were measured in both directions. The mechanical properties were optimized using an artificial neural network (ANN) and a genetic algorithm (GA) and the optimum knitted structure was produced as a substrate for coating with PU nanofibers. In second step, 20 different samples were produced by electrospinning the PU nanofibers at different process conditions (collector speed, feeding rate) on the optimized structure of the knitted fabric. Finally, the elastic properties of the bi-layered tubular structures were measured and optimized by the ANN and GA methods. Results presented show that the optimized structure of the esophageal prosthesis had proper mechanical properties similar to the esophagus. Such a structure can be used as a substitute in esophageal disorders.