Hollow CoS2 anchored on hierarchically porous carbon derived from Pien Tze Huang for high-performance supercapacitors

The development of electrode materials with a high specific capacitance, power density, and long-term stability is essential and remains a challenge for developing supercapacitors. Cobalt sulfides (CoS₂) are considered one of the most promising and widely studied electrode materials for supercapacitors. Herein, CoS₂ and hierarchical porous carbon derived from Pien Tze Huang waste are assembled into a cobalt sulfide/carbon (CoS₂/PZH) matrix composite using a one-step hydrothermal method to resolve the challenges of supercapacitors. The resulting CoS₂/PZH composite material exhibits a hierarchical porous structure with hollow CoS₂ embedded in a PZH framework. The uniform dispersion of the hierarchical porous structure CoS₂/PZH is achieved due to the PZH framework, while the uniform decoration of the porous PZH with the hollow CoS₂ prevents the PZH from stacking easily. Moreover, the excellent synergistic effect of the hierarchical porous and hollow structure of CoS₂/PZH can shorten the electron/ion diffusion channels, expose additional active sites, and provide stable structures for subsequent reactions. As a result, the CoS₂/PZH composite material displays a high initial specific capacity of 447.5 F g^-1 at 0.5 A g^-1, a high energy density of 22.38 W h kg^-1, and long-term cycling stability (a retention rate of 92.3% over 10 000 cycles at 5 A g^-1).

Superior supercapacitor performance of Bi2S3 nanorod/reduced graphene oxide composites

The present work is focused on the synthesis of bismuth sulfide (Bi2S3) nanorod/reduced graphene oxide (RGO) composites via a one-step hydrothermal method using GO and bismuth nitrate in 5 : 1, 3 : 1 and 2 : 1 weight ratios and their characterization. The morphological studies revealed the formation of homogeneously dispersed Bi2S3 nanorods on RGO sheets along with occasional wrapping in the Bi2S3 nanorod/RGO (3 : 1) composite. XRD, FTIR, Raman and XPS studies suggested the incorporation of Bi2S3 in RGO sheets. The galvanostatic charge-discharge measurements showed that the Bi2S3 nanorod/RGO (3 : 1) composite exhibited the highest specific capacitance (1932 F g-1) at 1 A g-1 in the presence of 2 M aqueous KOH in a three-electrode cell. This is ascribed to the enhanced contact area between metal sulfide nanoparticles and RGO, increased conductivity and synergistic effect of Bi2S3 and RGO. The optimized Bi2S3 nanorod/RGO (3 : 1) composite also maintained an excellent cycling stability with ∼100% capacitance retention after 700 cycles. It is noted that the supercapacitor performance of the Bi2S3 nanorod/RGO (3 : 1) composite was better than group V and VI metal chalcogenides and their nanocomposites reported in several previous studies.

Cobalt-tungsten diselenide-supported nickel foam as a battery-type positive electrode for an asymmetric supercapacitor device: comparison with various MWSe2 (M = Ni, Cu, Zn, and Mn) on the structural and capacitance characteristics

New exploration in nanomaterial research has been greatly encouraged so as to discover active electrode materials with extraordinary properties and performances. In this report, we demonstrated the synthesis of different transition metal-incorporated MWSe2 (M = Co, Ni, Cu, Zn, and Mn) and studied them using various characterization techniques. Subsequently, the proposed bimetallic chalcogenides were successfully applied as the active electrode materials for pseudocapacitor applications. The results of the electrochemical studies showed that CoWSe2 exhibited a higher specific capacitance of 3309.58 F g-1 at a constant applied current density of 1.35 A g-1, which is 1.07, 1.76, 2.04, 8.7, and 12.28-fold higher than that of NiWSe2, CuWSe2, ZnWSe2, MnWSe2, and pristine WSe2, respectively. The interconnected nanosheet structure with voids facilitates rich active sites for efficient electrolyte uptake and superior charge transfer during the faradaic redox reaction. In addition, the cycle stability of CoWSe2/NF was studied and the retention capacitance of about 82.1% was recorded, which is higher than that of NiWSe2 (60.4%), CuWSe2 (50.12%), ZnWSe2 (46.44%), MnWSe2 (40.12%), and pristine WSe2 (31.2%). Owing to the higher specific capacitance and cycle stability, CoWSe2 was proposed as a battery-type electrode material for the fabrication of an asymmetric device. The fabricated CoWSe2//AC device provided excellent energy density and power density of 182.54 W h kg-1 and 2810.81 W kg-1, respectively, at 3.51 A g-1. Based on these properties, the proposed research and studies can provide a way for the profound development of 2D-layered metal chalcogenides for energy storage applications.

Recent Advances in Metal Chalcogenides (MX; X = S, Se) Nanostructures for Electrochemical Supercapacitor Applications: A Brief Review

Supercapacitors (SCs) have received a great deal of attention and play an important role for future self-powered devices, mainly owing to their higher power density. Among all types of electrical energy storage devices, electrochemical supercapacitors are considered to be the most promising because of their superior performance characteristics, including short charging time, high power density, safety, easy fabrication procedures, and long operational life. An SC consists of two foremost components, namely electrode materials, and electrolyte. The selection of appropriate electrode materials with rational nanostructured designs has resulted in improved electrochemical properties for high performance and has reduced the cost of SCs. In this review, we mainly spotlight the non-metallic oxide, especially metal chalcogenides (MX; X = S, Se) based nanostructured electrode materials for electrochemical SCs. Different non-metallic oxide materials are highlighted in various categories, such as transition metal sulfides and selenides materials. Finally, the designing strategy and future improvements on metal chalcogenide materials for the application of electrochemical SCs are also discussed.

Benzoate Acid-Dependent Lattice Dimension of Co-MOFs and MOF-Derived CoS2@CNTs with Tunable Pore Diameters for Supercapacitors

Herein three novel cobalt metal-organic frameworks (Co-MOFs) with similar ingredients, [Co(bib)(o-bdc)]_∞ (1), [Co₂(bib)₂(m-bdc)₂]_∞ (2), and {[Co(bib)(p-bdc)(H₂O)](H₂O)_0.5}_∞ (3), have been synthesized from the reaction of cobalt nitrate with 1,4-bis(imidazol-1-yl)benzene (bib) and structure-related aromatic acids (1,2-benzenedicarboxylic acid = o-bdc, 1,3-benzenedicarboxylic acid = m-bdc, and 1,4-benzenedicarboxylic acid = p-bdc) by the solvothermal method. It is aimed to perform systematic research on the relationship among the conformation of benzoate acid, lattice dimension of Co-MOF, and pore diameter of MOF-derived carbon composite. Through the precursor strategy, Co-MOFs 1-3 have been utilized to synthesize porous cobalt@carbon nanotube composites (Co@CNTs). After the in situ gas-sulfurization, secondary composites CoS₂@CNTs were successfully obtained, which kept similar morphologies of corresponding Co@CNTs without destroying previous highly dispersed structures. Co-MOFs and two series of composites (Co@CNTs and CoS₂@CNTs) have been well characterized. Topology and Brunauer-Emmett-Teller analyses elucidate that the bdc^2- ion could control the pore diameters of MOF-derived carbon composites by adjusting the lattice dimension of Co-MOFs. The systematic studies on electrochemical properties demonstrate that (p)-CoS₂@CNT possesses hierarchical morphology, moderate specific surface area, proper pore diameter distribution, and high graphitization, which lead to remarkable specific capacitances (839 F g^-1 at 5 mV s^-1 and 825 F g^-1 at 0.5 A g^-1) in 2 M potassium hydroxide solution. In addition, the (p)-CoS₂@CNT electrode exhibits good electrochemical stability and still retains 82.9% of initial specific capacitance at the current density of 1 A g^-1 after 5000 cycles.

A novel Cu+-doped Li[Fe0.9Cu0.1Li0.1]PO4/C cathode material with enhanced electrochemical properties

LiFePO₄ is an effective battery material which has gained global focus.

Facile controlled synthesis of a hierarchical porous nanocoral-like Co3S4 electrode for high-performance supercapacitors

In this work, a hierarchical porous coral-like Co₃S₄ electrode is synthesized by a facile one-step hydrothermal approach showing high-performance as a supercapacitor.

Bath temperature controlled phase stability of hierarchical nanoflakes CoS2 thin films for supercapacitor application

In the present study, CoS₂ thin-film electrodes are synthesized at different bath temperatures using a simple chemical bath deposition (CBD) method.

Novel synthesis of RGO/NiCoAl–LDH nanosheets on nickel foam for supercapacitors with high capacitance

Hierarchically flower-like RGO/NiCoAl–LDH@NF hybrid has been fabricated by a facile, green approach, giving a high electrochemistry performance with high and stable specific capacitance.