Molybdenum-doped BiVO4 thin films: Facile preparation via hot-spin coating method and the relationship between surface statistical parameters and photoelectrochemical activity

Molybdenum-doped BiVO4 thin films were uniformly coated on indium-doped tin oxide (ITO) substrates via a facile modified hot spin coating (HSC) technique. The prepared layers were used as photoanode in a photoelectrochemical (PEC) cell. Different percentage of Mo dopant was examined to maximize the photo-current density (J) of the layers. The highest J value (872 ± 8 μA/cm2) was obtained by 5 atomic% of Mo doping. After that, the surface topographies of these samples were changed by varying the initial precursor concentration from 27 to 80 mM. The relation between surface topographies and the PEC activity of Mo-doped BiVO4 thin films was investigated from microscopic point of view by calculating the surface roughness exponent of α, and a mechanism for the PEC activity of Mo-doped BiVO4 photoanodes was proposed accordingly. The sample with a small roughness exponent provided a surface with jagged microscopic fluctuations which may trap the air molecules between the electrolyte and sample surface, hindering the fine atomic interaction for photo-generated electron-hole transition. Therefore, the layer with the highest roughness exponent (2α = 0.48 ± 0.03), which means the smoother microscopic surface and better interfacial contact with the electrolyte, exhibited the best PEC activity.

Band alignment tuning of heptazine-g-C3N4/g-ZnO vdW heterostructure as a promising water-splitting photocatalyst

Van der Waals (vdW) heterostructures of two-dimensional monolayers are a relatively new class of materials with highly tunable band alignment, bandgap energy, and bandgap transition type. In this study, we performed density functional theory calculations to investigate how a vdW heterostructure of heptazine-based graphitic carbon nitride (hg-C₃N₄) and graphitic zinc oxide (g-ZnO) monolayers is formed (hg-C₃N₄/g-ZnO). This heterostructure is a potential solar-driven photocatalyst for the water-splitting reaction. Upon the formation of the heterostructure, a type-I indirect bandgap (E_g = 2.08 eV) is created with appropriate conduction band minimum and valence band maximum levels relative to the oxidation/reduction potentials for the water-splitting reaction. In addition, a very large electrostatic potential difference of 11.18 eV is generated across the heterostructure, leading to a large, naturally-formed, built-in electric field directing from hg-C₃N₄ to g-ZnO. The produced electric field forces photogenerated electrons in g-ZnO to transfer toward hg-C₃N₄, leading to a decrease in the electron-hole recombination rate. We also found that both g-ZnO and hg-C₃N₄ synergistically lead to higher light absorption of the heterostructure (λ_max = 387 nm). Furthermore, band alignment, bandgap energy, and transition type of the heterostructure can be tuned by applying external perpendicular electric fields and biaxial strains. It was found that a strain of +2% leads to a Z-scheme band alignment (E_g = 2.34 eV, direct) and an electric field of 1 V Å^-1 leads to a type-II heterostructure (E_g = 2.29 eV, indirect), which are both beneficial for efficient water-splitting photocatalysis.

Extended Gibbs Free Energy and Laplace Pressure of Ordered Hexagonal Close-Packed Spherical Particles: A Wettability Study

The wetting property of spherical particles in a hexagonal close-packed (HCP) ordering from extended Gibbs free energy (GFE) and Laplace pressure view points is studied. A formalism is proposed to predict the contact angle (θ) of a droplet on the HCP films and penetration angle (α) of the liquid on the spherical particles. Then, the extended Laplace pressure for the layered HCP ordering is calculated and a correlation between the wetting angle, sign of pressure, and pressure gradient is achieved. Our results show that the sign and the slope of pressure are important criteria for determining the wettability state and it is found that the contact angle is independent of the particle radius, as supported by various experimental reports. The pressure gradient for the HCP films with Young contact angle higher than (lower than) a critical contact angle, 135° (45°), is positive (negative), indicating the superhydrophobicity (superhydrophilicity) state of the surface. To validate the proposed formulation, theoretical calculations are compared with the reported experimental measurements, showing a good agreement.

Group 6 transition metal dichalcogenide nanomaterials: synthesis, applications and future perspectives

Group 6 transition metal dichalcogenides (G6-TMDs), most notably MoS₂, MoSe₂, MoTe₂, WS₂ and WSe₂, constitute an important class of materials with a layered crystal structure. Various types of G6-TMD nanomaterials, such as nanosheets, nanotubes and quantum dot nano-objects and flower-like nanostructures, have been synthesized. High thermodynamic stability under ambient conditions, even in atomically thin form, made nanosheets of these inorganic semiconductors a valuable asset in the existing library of two-dimensional (2D) materials, along with the well-known semimetallic graphene and insulating hexagonal boron nitride. G6-TMDs generally possess an appropriate bandgap (1-2 eV) which is tunable by size and dimensionality and changes from indirect to direct in monolayer nanosheets, intriguing for (opto)electronic, sensing, and solar energy harvesting applications. Moreover, rich intercalation chemistry and abundance of catalytically active edge sites make them promising for fabrication of novel energy storage devices and advanced catalysts. In this review, we provide an overview on all aspects of the basic science, physicochemical properties and characterization techniques as well as all existing production methods and applications of G6-TMD nanomaterials in a comprehensive yet concise treatment. Particular emphasis is placed on establishing a linkage between the features of production methods and the specific needs of rapidly growing applications of G6-TMDs to develop a production-application selection guide. Based on this selection guide, a framework is suggested for future research on how to bridge existing knowledge gaps and improve current production methods towards technological application of G6-TMD nanomaterials.

Controlling electronic properties of MoS2/graphene oxide heterojunctions for enhancing photocatalytic performance: the role of oxygen

The manipulation of the constituents of novel hetero-photocatalysts is an effective method for improving photocatalytic efficiency, but a theoretical understanding of the relationship between interlayer interaction and photocatalytic activity is still lacking.