Thermal and optical control of electronic states in a single layer of switchable paramagnetic molecules

Valence tautomerism, non-innocence, and emergent magnetic phenomena in lanthanide-organic tessellations

Coordination networks based on lanthanide ions entangle collective magnetic phenomena, otherwise only observed in inorganic 4f materials, and the tunable spatial and electronic structure engineering intrinsic to coordination chemistry. In this review, we discuss the use of 2D-structure-directing linear {LnII/IIII2} nodes to direct the formation of polymeric coordination networks. The equatorial coordination plasticity of {LnII/IIII2} results in broad structural diversity, including previously unobtainable tessellations containing motifs observed in quasicrystalline tilings. The new phases host also magnetic frustration, which is at the origin of enhanced magnetic refrigeration potential. Finally, careful redox matching of Ln node and frontier orbitals of the ligand scaffold has culminated in the discovery of quantitative valence tautomeric conversion in a molecule-based Ln material, opening up new avenues for combining exotic magnetic phenomena with an encoded switch.

Thermodynamics of spin crossover in a bis(terpyridine) cobalt(II) complex featuring a thioether functionality

In this contribution, a terpyridine-based ligand bearing a thioether functionality is used to prepare a new cobalt(II) spin crossover complex: [Co(TerpyPhSMe)2](PF6)2 (1), where TerpyPhSMe is 4'-(4-methylthiophenyl)-2,2':6',2''-terpyridine. Its structure, determined by single crystal X-ray diffraction, reveals a mer coordination of the tridentate terpyridine ligands, leading to a tetragonally compressed octahedron. Intermolecular interactions in the crystal lattice freeze the complex in the high spin state in the solid state at all temperatures, as indicated by magnetometry and Electron Paramagnetic Resonance (EPR) spectra. When dissolved in acetonitrile, however, temperature dependent electronic, 1H-NMR and EPR spectra highlight an entropy-driven spin crossover transition, whose thermodynamics parameters have been determined. This is the first report of a cobalt(II) SCO complex featuring a thioether group, allowing its implementation in chemically grown bistable monolayers and may open important perspectives for the use of such systems in molecular spintronics.

Valence tautomerism in a cobalt-dioxolene complex containing an imidazolic ancillary ligand

This work reports the synthesis, structural, spectroscopic and magnetic investigation of two complexes, [Co(bmimapy)(3,5-DTBCat)]PF₆·H₂O (1) and [Co(bmimapy)(TCCat)]PF₆·H₂O (2), where bmimapy is an imidazolic tetradentate ancillary ligand and 3,5-DTBCat and TCCat are the 3,5-di-tert-butyl-catecholate and tetrachlorocatecholate anions, respectively. Their structures have been elucidated using single crystal X-ray diffraction, showing a pseudo-octahedral cobalt ion bound to a chelating dioxolene ligand and the ancillary bmimapy ligand in a folded conformation. Magnetometry displayed an entropy-driven, incomplete, Valence Tautomeric (VT) process for 1 in the 300-380 K temperature range, while 2 displayed a temperature independent, diamagnetic low-spin cobalt(iii)-catecholate charge distribution. This behaviour was interpreted on the basis of the cyclic voltammetric analysis, allowing the estimation of the free energy difference associated with the VT interconversion of +8 and +96 kJ mol^-1 for 1 and 2, respectively. A DFT analysis of this free energy difference highlighted the ability of the methyl-imidazole pendant arm of bmimapy favouring the onset of the VT phenomenon. This work introduces the imidazolic bmimapy ligand to the scientific community working in the field of valence tautomerism, increasing the library of ancillary ligands to prepare temperature switchable molecular magnetic materials.

Investigation of a Tetrathiafulvalene-Based Fe2+ Thermal Spin Crossover Assembled on Gold Surface

A thick film and a monolayer of tetrathiafulvalene-based Fe2+ spin-crossover complex have been deposited by solution on a Au (111) substrate, attempting both self-assembling monolayer protocol and a simpler drop-casting procedure. The thermally induced spin transition has been investigated using X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS). Temperature-dependent investigations demonstrated the retention of the switching behavior between the two spin states in thick molecular films obtained by drop-casting, while in the monolayer sample, the loss of the spin-crossover properties appears as a possible consequence of the strong interaction between the sulfur atoms of the ligand and the gold substrate.

A complementary characterisation technique for spin crossover materials; the application of X-ray photoelectron spectroscopy for future device applications

Spin crossover (SCO) materials have long been studied for their inherent electronic switchability, which has been well investigated for potential application in electronic and switching devices. As the technologies for the fabrication of thin films and monolayers continue to develop at an exceedingly rapid pace, an emerging challenge for the SCO community has become the characterisation of spin transitions in the surface layers of a material, as well as understanding the origins of discrepancies observed between SCO in thin films and that of the bulk material. For the manufacture of such devices to become a reality, it is crucial to understand how spin crossover is affected by interactions with the substrate material and within thin films. As such, detailed analysis of the surface layers without interference from the substrate material emerged as a critical area of characterisation for future developments in SCO devices. In this regard, X-ray Photoelectron Spectroscopy (XPS) has emerged as a complementary technique for the analysis of SCO in the surface layers of a material, becoming an essential part of a multi-technique protocol that is driving advances in the field. Here we describe the complementary application of XPS to a variety of SCO materials, review major developments and provide illustrative examples of innovations made through surface analysis with XPS.

The effect of tether groups on the spin states of iron(II)/bis[2,6-di(pyrazol-1-yl)pyridine] complexes

The synthesis of six 2,6-di(pyrazol-1-yl)pyridine derivatives bearing dithiolane or carboxylic acid tether groups is described: [2,6-di(pyrazol-1-yl)pyrid-4-yl]methyl (R)-lipoate (L1), 2-[(2,6-di(pyrazol-1-yl)pyridine)-4-carboxamido]ethyl (R)-lipoate (L2), 2-[(2,6-di(pyrazol-1-yl)pyridine)-4-carboxy]ethyl (R)-lipoate (L3), N-([2,6-di(pyrazol-1-yl)pyrid-4-ylsulfanyl]-2-aminoethyl (R)-lipoamide (L4), 2-[(2,6-di(pyrazol-1-yl)pyridine)-4-carboxamido]acetic acid (L5) and 2-[(2,6-di(pyrazol-1-yl)pyridine)-4-carboxamido]propionic acid (L6). The iron(ii) perchlorate complexes of all the new ligands exhibit gradual thermal spin-crossover (SCO) in the solid state above room temperature, except L4 whose complex remains predominantly high-spin. Crystalline [Fe(L6)2][ClO4]2·2MeCN contains three unique cation sites which alternate within hydrogen-bonded chains, and undergo gradual SCO at different temperatures upon warming. The SCO midpoint temperature (T1/2) of the complexes in CD3CN solution ranges between 208-274 K, depending on the functional group linking the tether groups to the pyridyl ring. This could be useful for predicting how these complexes might behave when deposited on gold or silica surfaces.

Triphenylantimony(V) Catecholates of the Type (3-RS-4,6-DBCat)SbPh3-Catechol Thioether Derivatives: Structure, Electrochemical Properties, and Antiradical Activity

A new series of triphenylantimony(V) 3-alkylthio/arylthio-substituted 4,6-di-tert-butylcatecholates of the type (3-RS-4,6-DBCat)SbPh3, where R = n-butyl (1), n-hexyl (2), n-octyl (3), cyclopentyl (4), cyclohexyl (5), benzyl (6), phenyl (7), and naphthyl-2 (8), were synthesized from the corresponding catechol thioethers and Ph3SbBr2 in the presence of a base. The crystal structures of 1, 2, 3, and 5 were determined by single-crystal X-ray analysis. The coordination polyhedron of 1-3 is better described as a tetragonal pyramid with a different degree of distortion, while that for 5- was a distorted trigonal bipyramid (τ = 0.014, 0.177, 0.26, 0.56, respectively). Complexes demonstrated different crystal packing of molecules. The electrochemical oxidation of the complexes involved the catecholate group as well as the thioether linker. The introduction of a thioether fragment into the aromatic ring of catechol ligand led to a shift in the potential of the "catechol/o-semiquinone" redox transition to the anodic region, which indicated the electron-withdrawing nature of the RS group. The radical scavenging activity of the complexes was determined in the reaction with DPPH radical.

Hypersensitive pressure-dependence of the conversion temperature of hysteretic valence tautomeric manganese-nitronyl nitroxide radical 2D-frameworks

Valence tautomeric manganese(ii)-radical lamellar compounds {[Mn₂(NITIm)₃]X}_n with NITIm a nitronyl nitroxide radical and X = ClO₄^- (1) or BF₄^- (2) show a pressure-induced increase of their conversion temperature by approximately 40 K at a mild external pressure of 0.1 GPa, shifting the transition from near room temperature to hot temperature regions.

Metal/Metal Redox Isomerism Governed by Configuration

A pair of diastereomeric dinuclear complexes, [Tp′(CO)BrW{μ‐η²‐C,C′‐κ²‐S,P‐C₂(PPh₂)S}Ru(η⁵‐C₅H₅)(PPh₃)], in which W and Ru are bridged by a phosphinyl(thiolato)alkyne in a side‐on carbon P,S‐chelate coordination mode, were synthesized, separated and fully characterized. Even though the isomers are similar in their spectroscopic properties and redox potentials, the like‐isomer is oxidized at W while the unlike‐isomer is oxidized at Ru, which is proven by IR, NIR and EPR‐spectroscopy supported by spectro‐electrochemistry and computational methods. The second oxidation of the complexes was shown to take place at the metal left unaffected in the first redox step. Finally, the tipping point could be realized in the unlike isomer of the electronically tuned thiophenolate congener [Tp′(CO)(PhS)W{μ‐η²‐C,C′‐κ²‐S,P‐C₂(PPh₂)S}Ru(η⁵‐C₅H₅)‐(PPh₃)], in which valence trapped W^III/Ru^II and W^II/Ru^III cationic species are at equilibrium.

Electrospray ionization: an efficient approach to deposit polymetallic molecular switches onto gold surfaces

Electrospray ionization (EI) deposition is proven efficient in obtaining monolayers of a polymetallic charge transfer complex on gold surfaces. The molecule's integrity is monitored by using PM-IRRAS and XPS. This approach broadens the perspective of molecular magnetic switch deposition, which is currently dominated by the thermal evaporation of monometallic spin crossover (SCO) complexes.

Macroscopic Polarization Change via Electron Transfer in a Valence Tautomeric Cobalt Complex

Polarization change induced by directional electron transfer attracts considerable attention owing to its fast switching rate and potential light control. Here, we investigate electronic pyroelectricity in the crystal of a mononuclear complex, [Co(phendiox)(rac-cth)](ClO₄)·0.5EtOH (1·0.5EtOH, H₂phendiox = 9, 10-dihydroxyphenanthrene, rac-cth = racemic 5, 5, 7, 12, 12, 14-hexamethyl-1, 4, 8, 11-tetraazacyclotetradecane), which undergoes a two-step valence tautomerism (VT). Correspondingly, pyroelectric current exhibits double peaks in the same temperature domain with the polarization change consistent with the change in dipole moments during the VT process. Time-resolved Infrared (IR) spectroscopy shows that the photo-induced metastable state can be generated within 150 ps at 190 K. Such state can be trapped for tens of minutes at 7 K, showing that photo-induced polarization change can be realized in this system. These results directly demonstrate that a change in the molecular dipole moments induced by intramolecular electron transfer can introduce a macroscopic polarization change in VT compounds.

Polarization change from directional electron transfer attracts considerable attention owing to its fast switching rate and potential light control. Here, the authors provide a proof-of-concept of electronic pyroelectricity induced by intramolecular electron transfer in the single crystal of a valence tautomeric compound.

Polyfunctional Sterically Hindered Catechols with Additional Phenolic Group and Their Triphenylantimony(V) Catecholates: Synthesis, Structure, and Redox Properties

New polyfunctional sterically hindered 3,5-di-tert-butylcatechols with an additional phenolic group in the sixth position connected by a bridging sulfur atom—(6-(CH₂-S-tBu₂Phenol)-3,5-DBCat)H₂ (L₁), (6-(S-tBu₂Phenol)-3,5-DBCat)H₂ (L₂), and (6-(S-Phenol)-3,5-DBCat)H₂ (L₃) (3,5-DBCat is dianion 3,5-di-tert-butylcatecolate)—were synthesized and characterized in detail. The exchange reaction between catechols L₁ and L₃ with triphenylantimony(V) dibromide in the presence of triethylamine leads to the corresponding triphenylantimony(V) catecholates (6-(CH₂-S-tBu₂Phenol)-3,5-DBCat)SbPh₃ (1) and (6-(S-Phenol)-3,5-DBCat)SbPh₃ (2). The electrochemical properties of catechols L₁–L₃ and catecholates 1 and 2 were investigated using cyclic voltammetry. The electrochemical oxidation of L₁–L₃ at the first stage proceeds with the formation of the corresponding o-benzoquinones. The second process is the oxidation of the phenolic moiety. Complexes 1 and 2 significantly expand their redox capabilities, owing to the fact that they can act as the electron donors due to the catecholate metallocycle capable of sequential oxidations, and as donors of the hydrogen atoms, thus forming a stable phenoxyl radical. The molecular structures of the free ligand L₁ and complex 1 in the crystal state were determined by single-crystal X-ray analysis.

Thermally-induced hysteretic valence tautomeric conversions in the solid state via two-step labile electron transfers in manganese-nitronyl nitroxide 2D-frameworks

Near room temperature hysteretic thermo-induced valence tautomerism was discovered in a layered 2D-coordination polymer of manganese(ii) with nitronyl nitroxide radicals separated by ClO4- anions (1). This opens a novel approach towards switchable materials with hysteresis and under ambient conditions with prospects for applications and for investigating solid-state intramolecular electron transfers. Herein, two new compounds with similar layered structures where the anions (X) are BF4- (2) or PF6- (3) are presented. Their magnetic behaviors also reveal hysteretic thermo-induced valence tautomeric conversions but in two steps and evidencing a strong effect of the anion. This occurs near room temperature (278-220 K) for 2 and higher for 3 (380-330 K). Their single crystal structures at different temperatures show that this involves two successive thermally-triggered electron transfers with switching between three redox tautomers formulated as {[MnII2-yMnIIIy(NITIm)3-y(NITRed)y]X}n, where y is temperature dependent. Upon cooling from the high-temperature redox-tautomer (y = 0) to the intermediate one (y = 1), half of the manganese(ii) centers are oxidized to manganese(iii) and 1/3 of the nitronyl nitroxide radicals (NITIm-) are reduced to the aminoxyl form (NITRed2-). On further cooling, the second half of the manganese(ii) centers are oxidized and another 1/3 of the radicals are reduced to reach the low-temperature redox-tautomer (y = 2). Upon reheating, reverse electron transfers occur. This is complementarily supported by X-ray powder measurements, differential scanning calorimetry, and electron paramagnetic resonance and Raman spectroscopies. These multi-stable compounds in which manganese ions exchange reversibly their electron with the nitronyl nitroxide radical are outstanding rare examples of two-step valence tautomerism in the solid state promoted by the polymeric structure.

A valence tautomeric cobalt-dioxolene complex with an anchoring group for prospective chemical grafting to metal oxides

Here, we synthesized a valence tautomeric cobalt-dioxolene complex featuring a protected anchoring group. At room temperature, the complex reveals a nearly pure low-spin-Co(iii)-catecholate state in the solid state, but a nearly pure high-spin-Co(ii)-semiquinonate state in toluene solution. Thermal switchability of the complex in solution and in the solid state is investigated.

Surface effects on a photochromic spin-crossover iron(ii) molecular switch adsorbed on highly oriented pyrolytic graphite

Thin films of an iron(ii) complex with a photochromic diarylethene-based ligand and featuring a spin-crossover behaviour have been grown by sublimation in ultra-high vacuum on highly oriented pyrolytic graphite and spectroscopically characterized through high-resolution X-ray and ultraviolet photoemission, as well as via X-ray absorption. Temperature-dependent studies demonstrated that the thermally induced spin-crossover is preserved at a sub-monolayer (0.7 ML) coverage. Although the photochromic ligand ad hoc integrated into the complex allows the photo-switching of the spin state of the complex at room temperature both in bulk and for a thick film on highly oriented pyrolytic graphite, this photomagnetic effect is not observed in sub-monolayer deposits. Ab initio calculations justify this behaviour as the result of specific adsorbate-substrate interactions leading to the stabilization of the photoinactive form of the diarylethene ligand over photoactive one on the surface.

Unconventional Method for Fabricating Valence Tautomeric Materials: Integrating Redox Center within a Metal-Organic Framework

Due to the structural advantages displayed by Metal-Organic Frameworks (MOFs), integrating Valence Tautomerism (VT) systems within MOFs could be an effective strategy in order to break through the constraints of the traditional ones. Herein, we report the first successful integration of a VT system into a MOF termed VT-MOF-1. The structural characteristics of VT-MOF-1, such as dinuclear cobalt-catechol clusters and solvent-accessible pores, are both innovative and novel, potentially yielding new vitality within VT field. In addition, VT-MOF-1 exhibits specific behaviors responsive to temperature and different solvent molecules as n-butanol, tert-butanol, and isopropyl alcohol. The entropy values and configurations of the solvent molecules might be responsible for the tunable sensing behaviors.

Spin Crossover Nanomaterials: From Fundamental Concepts to Devices

Nanoscale spin crossover materials capable of undergoing reversible switching between two electronic configurations with markedly different physical properties are excellent candidates for various technological applications. In particular, they can serve as active materials for storing and processing information in photonic, mechanical, electronic, and spintronic devices as well as for transducing different forms of energy in sensors and actuators. In this progress report, a brief overview on the current state-of-the-art of experimental and theoretical studies of nanomaterials displaying spin transition is presented. Based on these results, a detailed analysis and discussions in terms of finite size effects and other phenomena inherent to the reduced size scale are provided. Finally, recent research devices using spin crossover complexes are highlighted, emphasizing both challenges and prospects.

Surface confinement of TbPc2-SMMs: structural, electronic and magnetic properties

Since 2003, terbium(iii) bis-phthalocyaninato complexes have been recognised as acting as single molecule magnets (SMMs), propitiating multiple studies with the aim of better understanding the single metal-ion based magnetism with unusually high blocking temperatures. In the quest for novel applications, it became clear that if spintronic devices were made from SMM molecules, their confinement in the proximity of surfaces or electrodes would become difficult to circumvent. In this perspective article, we highlight the influence of the presence of different substrates on the magnetic performance of TbPc₂-SMMs, in principle caused by, among other effects, electronic hybridization, dipole-dipole coupling and changing quantum tunnelling (QT) rates on the surface. We show that the improved comprehension of how SMMs interact and communicate with the environment finally leads to magnetic remanence and lower tunnelling rates, paving the way to novel classes of spintronic devices.

Ni(II) Complexes of the Redox-Active Bis(2-aminophenyl)dipyrrin: Structural, Spectroscopic, and Theoretical Characterization of Three Members of an Electron Transfer Series

The sterically hindered bis(2-aminophenyl)dipyrrin ligand H₃^NL was prepared. X-ray diffraction discloses a bifurcated hydrogen bonding network involving the dipyrrin and one aniline ring. The reaction of H₃^NL with one equivalent of nickel(II) in the air produces a paramagnetic neutral complex, which absorbs intensively in the Vis-NIR region. Its electron paramagnetic resonance spectrum displays resonances at g₁ = 2.033, g₂ = 2.008, and g₃ = 1.962 that are reminiscent of an (S = 1/2) system having a predominant organic radical character. Both the structural investigation (X-ray diffraction) and density functional theory calculations on [Ni^II(^NL^•)] points to an unprecedented mixed "pyrrolyl-anilinyl" radical character. The neutral complex [Ni^II(^NL^•)] exhibits both a reversible oxidation wave at -0.28 V vs Fc⁺/Fc and a reversible reduction wave at -0.91 V. The anion was found to be highly air-sensitive, but could be prepared by reduction with cobaltocene and structurally characterized. It comprises a Ni(II) ion coordinated to a closed-shell trianionic ligand and hence can be formulated as [Ni^II(^NL)]^-. The cation was generated by reacting [Ni^II(^NL^•)] with one equivalent of silver hexafluoroantimonate. By X-ray diffraction we established that it contains an oxidized, closed-shell ligand coordinated to a nickel(II) ion. We found that a reliable hallmark for both the oxidation state of the ligand and the extent of delocalization within the series is the bond connecting the dipyrrin and the aniline, which ranges between 1.391 Å (cation) and 1.449 Å (anion). The cation and anion exhibit a rich Vis-NIR spectrum, despite their nonradical nature. The low energy bands correspond to ligand-based electronic excitations. Hence, the HOMO-LUMO gap is small, and the redox processes in the electron transfer series are exclusively ligand-centered.

Coherent transport through spin-crossover magnet Fe2 complexes

As one of the most promising building blocks in molecular spintronics, spin crossover (SCO) complexes have attracted increasing attention due to their magnetic bistability between the high-spin (HS) and low-spin (LS) states. Here, we explore the electronic structures and transport properties of SCO magnet Fe2 complexes with three different spin-pair configurations, namely [LS-LS], [LS-HS], and [HS-HS], by performing extensive density functional theory calculations combined with the non-equilibrium Green's function technique. Our calculations clearly reveal that the SCO magnet Fe2 complexes should display two-step spin transitions triggered by external stimuli, i.e. temperature or light, which confirm the previous phenomenological model and agree well with previous experimental measurements. Based on the calculated transport results, we observe a nearly perfect spin-filtering effect and negative differential resistance (NDR) behavior integrated in the SCO magnet Fe2 junction with the [HS-HS] configuration. The current through the [HS-HS] SCO magnet Fe2 complex under a small bias voltage is mainly contributed by the spin-down electrons, which is significantly larger than those of the [LS-LS] and [LS-HS] cases. The bias-dependent transmissions are responsible for the observed NDR effect. These theoretical findings suggest that SCO Fe2 complexes hold potential applications in molecular spintronic devices.

Cobalt(ii)-catalyzed oxidative esterification of aldehydes: a cooperative effect between cobalt and iodide ions

Efficient cobalt(ii) catalyzed oxidative alkoxylation of aldehydes leading to the corresponding esters is presented. Mechanism studies provide fresh insights into the cobalt mediated decomposition of TBHP in the presence of the iodide ion.

Organic Materials for Time-Temperature Integrator Devices

Time-temperature integrators (TTIs) are devices capable of recording the thermal history of a system. They have an enormous impact in the food and pharmaceutical industries. TTIs exploit several irreversible thermally activated transitions such as recrystallization, dewetting, smoothening, chemical decomposition, and polymorphic transitions, usually considered drawbacks for many technological applications. The aim of this article is to sensitize research groups working in organic synthesis and surface science toward TTI devices, enlarging the prospects of many new materials. We reviewed the principal applications highlighting the need and criticisms of TTIs, which offer a new opportunity for the development of many materials.