Isolation of a structural intermediate during switching of degree of interpenetration in a metal-organic framework

Breathing Behavior and Superprotonic Conductivity of Two-Dimensional Flexible Metal-Organic Frameworks Tuned with Alkoxy Groups

Flexible metal-organic frameworks (FMOFs) exhibit reversible structural transitions ("breathing" behaviors), which can regulate the proton transport passageway effectively. This property offers remarkable advantages for improving the proton conductivity. Our objective of this work is to design a single-variable flexibility synergistic strategy for the fabrication of FMOFs with high conductivity. Herein, four two-dimensional FMOFs, {[Co(4-bpdb)(R-ip)]·xsolvents}n (x = rich, 1-4), have been successfully designed and assembled (4-bpdb = 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene and R-ip = MeO/EtO/n-PrO/n-BuO-isophthalate). Upon the release and/or absorption of different solvent molecules, they display reversible breathing behaviors, thereby resulting in the formation of the partial and complete solvent-free compounds {[Co(4-bpdb)(R-ip)]·ysolvents}n (y = free or poor, 1A-4A). This breathing behavior involves the synergistic self-adaption of the dynamic torsion of alkoxy groups and reversible structural transformation, leading to remarkable changes in cell parameters and void space, as evidenced by single-crystal X-ray diffraction, powder X-ray diffraction, and N2 and CO2 adsorption analyses. At 363 K and 98% relative humidity, 2A exhibits the best proton conductivity among the FMOFs. Its conductivity reaches 4.08 × 10-2 S cm-1 and is one of the highest conductivities shown by reported unmodified MOF-based proton conductors.

Solvent-Driven Dynamics: Crafting Tailored Transformations of Cu(II)-Based MOFs

Metal-organic frameworks (MOFs), a sort of crystalline porous coordination polymers composed of metal ions and organic linkers, have been intensively studied for their ability to take up nonpolar gas-phase molecules such as ethane and ethylene. In this context, interpenetrated MOFs, where multiple framework nets are entwined, have been considered promising materials for capturing nonpolar molecules due to their relatively higher stability and smaller micropores. This study explores a solvent-assisted reversible strategy to interpenetrate and deinterpenetrate a Cu(II)-based MOF, namely, MOF-143 (noninterpenetrated form) and MOF-14 (doubly interpenetrated forms). Interpenetration was achieved using protic solvents with small molecular sizes such as water, methanol, and ethanol, while deinterpenetration was accomplished with a Lewis-basic solvent, pyridine. Additionally, this study investigates the adsorptive separation of ethane and ethylene, which is a significant application in the chemical industry. The results showed that interpenetrated MOF-14 exhibited higher ethane and ethylene uptakes compared to the noninterpenetrated MOF-143 due to narrower micropores. Furthermore, we demonstrate that pristine MOF-14 displayed higher ethane selectivity than transformed MOF-14 from MOF-143 by identifying the "fraction of micropore volume" as a key factor influencing ethane uptake. These findings highlight the potential of controlled transformations between interpenetrated and noninterpenetrated MOFs, anticipating that larger MOF crystals with narrower micropores and higher crystallinity will be more suitable for selective gas capture and separation applications.

Impact of the Structural Modification of Diamondoid Cd(II) MOFs on the Nonlinear Optical Properties

A change in the degree of interpenetration (DOI) in metal-organic frameworks (MOFs) prompted by heat, pressure, or exchange of solvents is a fascinating phenomenon that can potentially impact the functional properties of MOFs. Structural transformation involving two noncentrosymmetric MOFs with different DOIs provides a rare opportunity to manipulate their optical properties. Herein, we report an unusual single-crystal-to-single-crystal (SCSC) transformation of a noncentrosymmetric 7-fold interpenetrated diamondoid (dia) Cd(II) MOF into another noncentrosymmetric but 8-fold interpenetrated dia MOF upon the removal of guest solvents. A hydrogen-bond network formed between the lattice solvents and linker trans-2-(4-pyridyl)-4-vinylbenzoate (pvb) in a 7-fold interpenetrated noncentrosymmetric MOF results in a significant increase in the two-photon absorption cross-section (11 times) as compared to that in the desolvated 8-fold interpenetrated MOF. Also, an increase in the DOI in the noncentrosymmetric crystals strengthened the π···π interaction between the individual diamondoid networks and enhanced the second-order nonlinear optical (NLO) coefficient (deff) by 4.5 times. These results provide a way to manipulate the optical properties of MOFs using a combined strategy of the formation of hydrogen bonds and interpenetration for access to tunable single-crystal NLO devices in an SCSC manner. By changing the experimental conditions, another dia Cd(II) MOF with 4-fold interpenetration can be isolated. In this centrosymmetric MOF, the olefin groups in the backbone of the ligand (pvb) undergo a [2 + 2] cycloaddition reaction quantitatively under UV light but in a non-SCSC fashion.

High Pressure In Situ Single-Crystal X-Ray Diffraction Reveals Turnstile Linker Rotation Upon Room-Temperature Stepped Uptake of Alkanes

The rare availability of suitable single-crystal X-ray diffraction (SCXRD) structural data allows for the direct interpretation of the response of a framework to gas sorption and may lead to the development of improved functional porous materials. We report an in situ SCXRD structural investigation of a flexible MOF subjected to methane, ethane, propane, and butane gas pressures. Supporting theoretical investigations indicate weak host-guest interactions for the crystallographically modelled gaseous guests and, in addition, reveal that a turnstile mechanism facilitates the transport of alkanes through the seemingly nonporous system. Inflections present in the adsorption isotherms are furthermore rationalized as due to gate-opening, but without the expected creation of new accessible space.

Linker Expansion and Its Impact on Switchability in Pillared-Layer MOFs

Linker elongation is an important method to systematically adjust porosity and pore size in isoreticular MOFs. In flexible structures, this approach opens the possibility for the systematic analysis of the building blocks and their contribution to the overall flexible behavior enabling tuning of the framework responsivity toward molecular stimuli. In this work, we report two new compounds isoreticular to the highly flexible pillared layer structure DUT-8(Ni) ([Ni₂(2,6-ndc)₂(dabco)]_n, 2,6-ndc = 2,6-naphthalenedicarboxylate, dabco = 1,4-diazabicylo[2.2.2]octane). Aromatic linker 2,6-ndc was substituted by longer carboxylic linkers, namely, 4,4'-biphenyldicarboxylate (4,4'-bpdc) and 4,4'-stilbenedicarboxylate (4,4'-sdc), while the dabco pillar was retained. The structural response of the new compounds toward the desolvation and adsorption of various fluids was studied using advanced in situ PXRD techniques, demonstrating distinct differences in the flexible behavior of three compounds and disclosing the impact of linker structure on the framework response. Theoretical calculations provide mechanistic insights and an energetic rationale for the pronounced differences in switchability observed. The energetics of linker bending and linker-linker dispersion interactions govern the phase transitions in investigated MOFs.

Solvent-triggered single-crystal-to-single-crystal transformation from a monomeric to polymeric copper(II) complex based on an aza macrocyclic ligand

Reversible solvent-triggered single-crystal-to-single-crystal (SCSC) transformations are observed between two copper(II) azamacrocyclic complexes: [Cu(C₁₆H₃₈N₆)(H₂O)₂](C₁₂H₆O₄) (1) and [Cu(C₁₆H₃₈N₆)(C₁₂H₆O₄)] (2). Complex (1) was prepared via self-assembly of a copper(II) azamacrocyclic complex containing butyl pendant groups, [Cu(C₁₆H₃₈N₆)(ClO₄)₂], with 2,7-naphthalenedicarboxylic acid. When monomeric compound (1) was immersed in CH₃OH, coordination polymer (2) was obtained, indicating a solvent-triggered SCSC transformation. Furthermore, when (2) was immersed in water, an reverse SCSC transformation from (2) to (1) occurred. Complex (1) presents a 3D supramolecular structure formed via intermolecular hydrogen-bonding interactions, whereas complex (2) features a 1D zigzag coordination polymer. The reversible SCSC transformation of (1) and (2) was characterized using single-crystal X-ray diffraction and in situ powder X-ray diffraction techniques. Despite its poor porosity, complex (2) displayed interesting CO₂ adsorption behaviour under CO₂ gas.

CO2-induced single-crystal to single-crystal transformations of an interpenetrated flexible MOF explained by in situ crystallographic analysis and molecular modeling

A molecular-level investigation is reported on breathing behaviour of a metal-organic framework (1) in response to CO2 gas pressure. High-pressure gas adsorption shows a pronounced step corresponding to a gate-opening phase transformation from a closed (1cp ) to a large-pore (1lp ) form. A plateau is observed upon desorption corresponding to narrow-pore intermediate form 1np which does not occur during adsorption. These events are corroborated by pressure-gradient differential scanning calorimetry and in situ single-crystal X-ray diffraction analysis under controlled CO2 gas pressure. Complete crystallographic characterisation facilitated a rationalisation of each phase transformation in the series 1cp → 1lp → 1np → 1cp during adsorption and subsequent desorption. Metropolis grand-canonical Monte Carlo simulations and DFT-PBE-D3 interaction energy calculations strongly underpin this first detailed structural investigation of an intermediate phase encountered upon desorption.

Theoretical Investigation of the Topology of Spiroborate-Linked Ionic Covalent Organic Frameworks (ICOFs)

A novel type of ionic covalent organic framework (ICOF) with a spiroborate linkage has been recently designed and synthesized by Zhang and co-workers (Ionic Covalent Organic Frameworks with Spiroborate Linkage, Angew. Chem. Int. Ed. 2016, 55, 1737-1741). The spiroborate-linked ICOFs exhibit high Brunauer-Emmett-Teller (BET) surface areas and significant amounts of H₂ and CH₄ uptakes, combined with excellent thermal and chemical stabilities. Inspired by the novel properties of ICOFs, with the aim of gaining better understanding of the structure of such spiroborate-linked ICOFs, a series of potential 3D network configurations of ICOFs connected with tetrahedral [BO₄ ]^- nodes were proposed, assuming the [BO₄ ]^- node in spiroborate segments takes a tetrahedral configuration. These ICOFs, in terms of 2D and 3D topology through torsional energy of the [BO₄ ]^- fragment, pore-size distribution, total energy of the framework, and gas adsorption properties were compared and systematically investigated by density functional theory calculations, molecular mechanics, and well-established Grand canonical Monte Carlo simulations. The results indicate that spiroborate-linked ICOFs are likely a mixture of various topologies. Among these architectures, the five-fold interpenetrating model shows the lowest energy and reasonable gas uptakes, therefore, it is considered to be the most possible structure. More importantly, the five-fold interpenetrating model, showing high CH₄ uptakes compared with several classic porous materials, represents a promising CH₄ storage material.

Selective CO2 adsorption and theoretical simulation of a stable Co(ii)-based metal–organic framework with tunable crystal size

A stable Co(ii)-MOF shows selective CO₂ adsorption and high H₂ uptake. The simulations of sorption confirm this reasonable design approach.

MOFs containing a linear bis-pyridyl-tris-amide and angular carboxylates: exploration of proton conductivity, water vapor and dye sorptions

Four new MOFs were shown to have appreciable proton conductivities, selective adsorption of water vapor over nitrogen and a tendency to selectively adsorb cationic dyes such as methylene blue and crystal violet.

Single-side and double-side swing behaviours of a flexible porous coordination polymer with a rhombic-lattice structure

A rhombic porous coordination polymer can show special reversible–irreversible structural transformations with single-side and double-side swing, as well as sophisticated bond reconstitution behaviours.

Selective sorting of polymers with different terminal groups using metal-organic frameworks

Separation of high-molecular-weight polymers differing just by one monomeric unit remains a challenging task. Here, we describe a protocol using metal-organic frameworks (MOFs) for the efficient separation and purification of mixtures of polymers that differ only by their terminal groups. In this process, polymer chains are inserted by threading one of their extremities through a series of MOF nanowindows. Selected termini can be adjusted by tuning the MOF structure, and the insertion methodology. Accordingly, MOFs with permanently opened pores allow for the complete separation of poly(ethylene glycol) (PEG) based on steric hindrance of the terminal groups. Excellent separation is achieved, even for high molecular weights (20 kDa). Furthermore, the dynamic character of a flexible MOF is used to separate PEG mixtures with very similar terminal moieties, such as OH, OMe, and OEt, as the slight difference of polarity in these groups significantly changes the pore opening kinetics.

The separation of high molecular weight polymers composed of the same number of monomeric units remains highly challenging. Here, the authors show that efficient separation and purification of mixtures of polymers that differ only by their terminal groups can be achieved through polymer threading in metal-organic framework channels.

Giant Hysteretic Sorption of CO2 : In Situ Crystallographic Visualization of Guest Binding within a Breathing Framework at 298 K

A dynamic Zn^II -MOF has been shown to exhibit extreme breathing behavior under gas pressure. The very narrow pore form of the activated framework opens up in the presence of carbon dioxide, thus making it a suitable material for CO₂ capture. Sorption of CO₂ at 298 K and relatively high pressure clearly shows a two-step isotherm with giant hysteresis for the second step. In-situ single-crystal diffraction analysis was carried out under CO₂ gas pressure at 298 K using an environmental gas cell in order to visualize the interaction between CO₂ and the host framework. The results are well supported by pressure-gradient differential scanning calorimetry (P-DSC) and variable-pressure powder X-ray analysis. Theoretical calculations have been carried out in order to further back up the crystallographic data.

Structural Transformations of Amino-Acid-Based Polymers: Syntheses and Structural Characterization

A discrete complex [Zn(tpro)₂(H₂O)₂] (1, Htpro = l-thioproline), and two structural isomers of coordination polymers, a 1D chain of [Zn(tpro)₂]_n (2) and a layered structure [Zn(tpro)₂]_n (3), were synthesized and characterized. The discrete complex 1 undergoes a temperature-driven structural transformation, leading to the formation of a 1D helical coordination polymer 2. Compound 3 is comprised of a 2D homochiral layer network with a (4,4) topology. These layers are mutually linked through hydrogen bonding interactions, resulting in the formation of a 3D network. When 1 is heated, it undergoes nearly complete conversion to the microcrystalline form, i.e., compound 2, which was confirmed by powder X-ray diffractions (PXRD). The carboxylate motifs could be activated after removing the coordinated water molecules by heating at temperatures of up to 150 °C, their orientations becoming distorted, after which, they attacked the activation sites of the Zn(II) centers, leading to the formation of a 1D helix. Moreover, a portion of the PXRD pattern of 1 was converted into the patterns corresponding to 2 and 3, and the ratio between 2 and 3 was precisely determined by the simulation study of in-situ synchrotron PXRD expriments. Consequently, such a 0D complex is capable of underdoing structural transformations and can be converted into 1D and/or 2D amino acid-based coordination polymers.

Vapour-driven crystal-to-crystal transformation showing an interlocking switch of the coordination polymer chains between 1D and 3D

A rare crystal-to-crystal transformation occurs between 1D coordination polymer chains and 3D mechanically interlocked structures via reversible opening and closing of the homogeneous chains without any change in the coordination mode and composition.

Remoulding a MOF’s pores by auxiliary ligand introduction for stability improvement and highly selective CO2-capture

An auxiliary ligand was introduced as a girder to remould a flexible MOF’s pores and bring new pore functionality, allowing superior stability and highly selective CO₂ capture.

Area negative thermal expansion in a mixed metal mixed organic MOF: “elevator-platform” mechanism induced by O–H⋯O hydrogen bonding

Rare area negative thermal expansion of a new mixed metal mixed organic MOF has been described using an “elevator-platform” analogy induced by O–H⋯O hydrogen bonding.

MOF the beaten track: unusual structures and uncommon applications of metal-organic frameworks

Over the past few decades, metal-organic frameworks (MOFs) have proved themselves as strong contenders in the world of porous materials, standing alongside established classes of compounds such as zeolites and activated carbons. Following extensive investigation into the porosity of these materials and their gas uptake properties, the MOF community are now branching away from these heavily researched areas, and venturing into unexplored avenues. Ranging from novel synthetic routes to post-synthetic functionalisation of frameworks, host-guest properties to sensing abilities, this review takes a sidestep away from increasingly 'traditional' approaches in the field, and details some of the more curious qualities of this relatively young family of materials.

Opening of an Accessible Microporosity in an Otherwise Nonporous Metal-Organic Framework by Polymeric Guests

The development of highly porous metal-organic frameworks (MOFs) is greatly sought after, due to their wide range of applications. As an alternative to the development of new structures, we propose to obtain new stable configurations for flexible MOFs by insertion of polymeric guests. The guests prevent the otherwise spontaneous closing of the host frameworks and result in stable opened forms. Introduced at a fraction of the maximal capacity, polymer chains cause an opening of the occupied nanochannels, and because of the MOF reticular stiffness, this opening is propagated to the neighboring nanochannels that become accessible for adsorption. Composites were obtained by in situ polymerization of vinyl monomers in the nanochannels of an otherwise nonporous MOF, resulting in homogeneously loaded materials with a significant increase of porosity (S_BET = 920 m²/g). In addition, by limiting the accessible configurations for the framework and forbidding the formation of a reactive intermediate, the polymeric guest prevented the thermal degradation of the host MOF even at very low loading (as low as 3 wt %) and increased its stability domain by more than 200 °C.

Tracking the Superefficient Anion Exchange of a Dynamic Porous Material Constructed by Ag(I) Nitrate and Tripyridyltriazole via Multistep Single-Crystal to Single-Crystal Transformations

To avoid the instability and inefficiency for anion-exchange resins and layered double-hydroxides materials, we present herein a flexible coordination network [Ag(L²⁴³)](NO₃)(H₂O)(CH₃CN) (L²⁴³ = 3-(2-pyridyl)-4-(4-pyridyl)-5-(3-pyridyl)-1,2,4-triazole) with superefficient trapping capacity for permanganate, as a group-7 oxoanion model for radiotoxic pertechnetate pollutant. Furthermore, a high-throughput screening strategy has been developed based on concentration-gradient design principle to ascertain the process and mechanism for anion exchange. Significantly, a series of intermediates can be successfully isolated as the qualified crystals for single-crystal X-ray diffraction. The result evidently indicates that such a dynamic material will show remarkable breathing effect of the three-dimensional host framework upon anion exchange, which mostly facilitates the anion trapping process. This established methodology will provide a general strategy to discover the internal secrets of complicated solid-state reactions in crystals at the molecular level.

Coordination change, lability and hemilability in metal–organic frameworks

Deformation or cleavage/reformation of metal–ligand bonds in MOFs lies at the heart of chemical/thermal stability and dynamic/flexible behaviour, provides avenues for post-synthetic modification, and can enable novel or improved performance for a variety of applications.

A five-fold interpenetrated metal–organic framework showing a large variation in thermal expansion behaviour owing to dramatic structural transformation upon dehydration–rehydration

A five-fold interpenetrated MOF has the highest uniaxial negative thermal expansion coefficient reported for any interpenetrated MOF to date. Upon dehydration, the framework shows considerable change in the magnitudes of the thermal expansion coefficients.

Highly efficient Cr2O72−removal of a 3D metal-organic framework fabricated by tandem single-crystal to single-crystal transformations from a 1D coordination array

Tandem single-crystal to single-crystal (SC–SC) transformation of a 1D neutral chain affords a 3D cationic framework, showing highly efficient Cr₂O₇²⁻captureviaSC–SC anion-exchange.

Dual structure evolution of a Ag(i) supramolecular framework triggered by anion-exchange: replacement of terminal ligand and switching of network interpenetration degree

Dual single-crystal to single-crystal transformations triggered by different anion-exchanges are achieved for a Ag(i) coordination framework, where switching of network interpenetration degree is observed.