Magnesium-catalysed nitrile hydroboration

Insight into the MOtBu (M=Na, K)-Mediated Dehydrogenation of Dimethylamine-Borane and Transfer Hydrogenation of Nitriles to Primary Amines

Selective synthesis of primary amines from nitriles is challenging in synthetic chemistry due to the possible en-route generation of various amines and imines. Herein, we report a practical and operationally simple MOtBu-mediated (M=Na, K) transfer hydrogenation of nitriles to the corresponding primary amines with a relatively unexplored sacrificial hydrogen source (dimethylamine borane). The strategy encompasses a broad substrate scope under transition metal-free conditions and does not require any solvent. The mechanistic investigation was performed with the aid of control experiments and spectroscopic studies. The GC analysis of the reaction mixture exhibited the evolution of the H2 gas. Additionally, detailed computational calculations were undertaken to shed light on the possible intermediates and transition states involved during the present protocol.

The borylamino-diborata-allyl anion

Reactions of β-diketiminato alkaline earth alkyldiboranate derivatives [(BDI)Ae{pinBB(R)pin}] (BDI = HC{(Me)CNDipp}2; Dipp = 2,6-i-Pr2C6H3; Ae = Mg, R = n-Bu or Ae = Ca, R = n-hexyl) with t-BuNC provide access to the respective group 2 derivatives of unprecedented diborata-allyl, {(pinB)2CNBpin(t-Bu)}-, anions. Although the necessary mode of B-C bond cleavage implicated in these transformations could not be elucidated, further studies of the reactivity of magnesium triboranates toward isonitriles delivered a more general and rational synthetic access to analogous anionic moieties. Extending this latter reactivity to a less symmetric triboranate variant also provided an isomeric Mg-C-bonded dibora-alkyl species and sufficient experimental insight to prompt theoretical evaluation of this reactivity. DFT calculations, thus, support a reaction pathway predicated on initial RNC attack at a peripheral boron centre and the intermediacy of such dibora-alkyl intermediates.

Low-valent-tungsten catalysis enables hydroboration of esters and nitriles

In the research presented herein, low-valent-tungsten-catalyzed hydroboration of esters and nitriles was investigated. Aromatic and aliphatic substrates were smoothly reduced to corresponding alcohol derivatives and N,N-diborylamines in the presence of W(CO)4(NCMe)2. Valuable derivatives were conveniently accessed by introducing a further functionalization process to crude hydroboration mixtures in one pot.

Iron complexes supported by silyl-NHC chelate ligands: synthesis and use for double hydroboration of nitriles

Iron complexes bearing new silyl-NHC bidentate ligands were synthesised by treating Fe3(CO)12 with a mixture of N-(hydrosilyl)methyl imidazolium salts and a base. These complexes showed high performance in the catalytic double hydroboration of nitrile with pinacolborane (HBpin) to produce N,N-bis(boryl)amine by a combination of UV irradiation and mild heating (60 °C). The product yields for the hydroboration of aromatic and aliphatic nitriles reached 85%-95% (NMR) using an iron complex (5 mol%). Reducing the loading amount of the iron complex to 0.5 mol% still afforded the products in high yields. An analogous ruthenium complex, which was similarly synthesised using Ru3(CO)12, showed lower activity. Stoichiometric reactions of the iron complex with nitriles afforded Fe(0)-N-silylimine complexes, which may be dormant states in nitrile hydroboration. A catalytic mechanism including Fe(0) N-silylimine species is proposed.

Lanthanide Mimicking by Magnesium for Oxazolidinone Synthesis

In the last decade, magnesium complexes have emerged as a viable alternative to transition-metal catalysts for the hydrofunctionalization of unsaturated bonds. However, their potential for advanced catalytic reactions has not been thoroughly investigated. To address this gap, we have developed a novel magnesium amide compound (3) using a PNP framework that is both bulky and flexible. Our research demonstrates that compound 3 can effectively catalyze the synthesis of biologically significant oxazolidinone derivatives. This synthesis involves a tandem reaction of hydroalkoxylation and cyclohydroamination of isocyanate using propargyl alcohol. Furthermore, we conducted comprehensive theoretical calculations to gain insights into the reaction mechanism. It is important to note that these types of transformations have not been reported for magnesium and would significantly enhance the catalytic portfolio of the 7th most abundant element.

Green Synthesis of Electrophilic Alkenes Using a Magnesium Catalyst under Aqueous Conditions and Mechanistic Insights by Density Functional Theory

A green approach for the synthesis of electrophilic alkenes has been developed via Knoevenagel condensation between active methylene compounds and carbonyl compounds using Mg powder under aqueous conditions. In this strategy, Mg(OH)2 acts as a catalyst, which was generated in situ by the reaction between metallic Mg (20 mol %) and water. Mg was found to be an efficient, nontoxic, and inexpensive metal catalyst system for producing a range of electrophilic alkenes in excellent yields (≤98%). A gram-scale synthesis of electrophilic alkenes has been developed, and Mg metal was recovered and recycled up to three times without an appreciable loss of catalytic activity. A catalytic cycle was proposed, and the reaction mechanism was investigated using density functional theory. The key steps are enolization of ethyl cyanoacetate, C-C bond formation, and then regeneration of the catalyst via metathesis with H2O. The overall reaction occurs easily with a maximum ΔG°⧧ value of 7.9 kcal/mol for the rate-determining C-C bond formation step. Our protocol has several advantages and can be further extended to one-pot sequential Knoevenagel condensation and Michael addition, and one-pot sequential Knoevenagel condensation and chemoselective reduction can be used for the synthesis of valuable precursors of pharmaceutical products under green and aqueous conditions.

Secondary-sphere preorganization enables nickel-catalyzed nitrile hydroboration

Herein, we describe nickel-catalyzed nitrile hydroboration with pinacolborane, wherein a tethered NHC-pyridonate ligand enables efficient catalysis (5 mol% [Ni], ≤6 h reaction time) at room temperature. Mechanistic studies, including isolation of the catalytically relevant intermediates, shed light on the cooperative role of the ligand in activating both reagents simultaneously.

Grignard Reagent-Catalyzed Hydroboration of Esters, Nitriles, and Imines

The reduction in esters, nitriles, and imines requires harsh conditions (highly reactive reagents, high temperatures, and pressures) or complex metal-ligand catalytic systems. Catalysts comprising earth-abundant and less toxic elements are desirable from the perspective of green chemistry. In this study, we developed a green hydroboration protocol for the reduction in esters, nitriles, and imines at room temperature (25 °C) using pinacolborane as the reducing agent and a commercially available Grignard reagent as the catalyst. Screening of various alkyl magnesium halides revealed MeMgCl as the optimal catalyst for the reduction. The hydroboration and subsequent hydrolysis of various esters yielded corresponding alcohols over a short reaction time (~0.5 h). The hydroboration of nitriles and imines produced various primary and secondary amines in excellent yields. Chemoselective reduction and density functional theory calculations are also performed. The proposed green hydroboration protocol eliminates the requirements for complex ligand systems and elevated temperatures, providing an effective method for the reduction in esters, nitriles, and imines at room temperature.

Synthesis and Reactivity of Alkali Metal Hydrido-Magnesiate Complexes which Exhibit Group 1 Metal Counter-Cation Specific Stability

Reactions of the series of alkali metal amides M(HMDS) (M = Li-Cs; HMDS = [N(SiMe3)2]-) with the neutral magnesium(II) hydride compound [Mg(BDIDipp)(μ-H)]2 (BDIDipp = [CH{C(Me)NDipp}2], Dipp = 2,6-iPr2-C6H3) have been carried out. When M = Li or Na, the reactions yielded Mg(BDIDipp)(HMDS) and MH as the primary products. In the sodium amide reaction, [Na2(HMDS)][{Mg(BDIDipp)}2(H)3] was obtained as a low-yield by-product. When M = K-Cs, the reactions gave the group 1 metal hydrido-magnesiates, M2[Mg(BDIDipp)(HMDS)(H)]2·(benzene)n (n = 0 or 1), the thermal stability of which increases with the increasing molecular weight of the alkali metal involved. Reactions of Cs2[Mg(BDIDipp)(HMDS)(H)]2·(benzene) with 18-crown-6 and CO gave the first monomeric alkali metal hydrido-magnesiate [Cs(18-crown-6)][Mg(BDIDipp)(HMDS)(H)] and the ethenediolate complex Cs2[{Mg(BDIDipp)(HMDS)}2(μ-C2H2O2)], respectively. The new synthetic route to alkali metal hydrido-magnesiates described herein may facilitate further reactivity studies of this rare compound class.

Zinc Catalyzed Hydroboration of Esters and Nitriles with Pinacolborane

We developed a bench-stable iminopyridine-ligated zinc complex for the effective catalytic hydroboration of esters and nitriles under solvent-free conditions. Various esters and nitriles bearing different functionalities were selectively reduced to form corresponding alcohols and amines in good yields. Detailed Hammett plots are provided to explain the electronic effects on the phenyl ring.

Controlled reduction of isocyanates to formamides using monomeric magnesium

This work describes a transition metal-free methodology involving an efficient and controlled reduction of isocyanates to only formamide derivatives using pinacolborane (HBpin) as the hydrogenating agent and a bis(phosphino)carbazole ligand stabilized magnesium methyl complex (1) as the catalyst. A large number of substrates undergo selective hydroboration and give exclusively N-boryl formamides.

Partner effect in accelerating pincer-co catalyzed nitrile hydroboration reactions

The pincer-Co catalyzed nitrile hydroboration of nitrile has been presented as an elegant strategy to afford amine synthesis; however, ligand engineering is required. We show here a strategy to tune the catalytic behavior of the organometallic catalyst, as an alternative approach to ligand engineering, by means of computational investigations to understand the effect of partners such as (18-crown-6)K⁺, W(CO)₃ and W(PMe₃)₃ on the reactivity of the pincer-Co catalyzed nitrile hydroboration reaction through π-coordination to the ligand aromatic ring. The extra additives bind the central phenyl ring of the ligand by either dispersion or chemical bonding. The electron-richness of the cobalt center is tuned by the partner, and follows the order (18-crown-6)K⁺ > W(PMe₃)₃ > no partner > W(CO)₃. While the influence of the covalent W-containing partners parallels the electron-richness of the W, the non-covalent partner, (18-crown-6)K⁺, surprisingly increases the donor ability of the pincer ligand through the polarization effect. All the elementary steps involved in the nitrile hydroboration reaction are influenced by the partner, and the overall barrier is lowered by a surprisingly large amount of 4.9 kcal mol^-1 in the presence of (18-crown-6)K⁺, suggesting a notable partner effect to be explored by experimentalists so that the reactivity of a catalyst can be tuned without ligand modification.

Comparing B-H Bond Activation in NiIIX(NNN)-Catalyzed Nitrile Dihydroboration (X = Anionic N-, C-, O-, S-, or P-donor)

One of the key steps in many metal complex-catalyzed hydroboration reactions is B-H bond activation, which results in metal hydride formation. Anionic ligands that include multiple lone pairs of electrons, in cooperation with a metal center, have notable potential in redox-neutral B-H bond activation through metal-ligand cooperation. Herein, using an easily prepared N_pyridineN_imineN_pyrrolide ligand (L²)^-, a series of divalent Ni^IIX(NNN) complexes were synthesized, with X = bromide (2), phenoxide (3), thiophenoxide (4), 2,5-dimethylpyrrolide (5), diphenylphosphide (6), and phenyl (7). The complexes were characterized using ¹H and ¹³C NMR spectroscopy, mass spectrometry, and X-ray crystallography and employed as precatalysts for nitrile dihydroboration. Superior activity of the phenoxy derivative (3) [vs thiophenoxy (4) or phenyl (7)] suggests that B-H bond activation occurs at the Ni-X (vs ligand Ni-N_pyrrolide) bond. Furthermore, stoichiometric treatment of 2-7 with a nitrile showed no reaction, whereas stoichiometric reactions of 2-7 with pinacolborane (HBpin) gave the same Ni-H complex for 2, 3, and 5. Considering that only 2, 3, and 5 successfully catalyzed nitrile dihydroboration, we suggest that the catalytic cycle involves a conventional inner sphere pathway initiated by substrate insertion into Ni-H.

Metal/Non-Metal Catalyzed Activation of Organic Nitriles

Nitrile activation is a prominent topic in recent developments in chemistry, especially in organic, inorganic, biological chemistry, as well as in the natural synthesis of products and in the pharmaceutical industry. The activation of nitriles using both metal and non-metal precursors has attracted several researchers, who are exploring newer ways to synthesize novel compounds. Nitrile activation can be achieved by combining various catalytic double hydroelementation reactions, such as hydrosilylation, hydroboration, and hydrogenation of organonitriles using silanes, pinacolborane, and other sources of hydrogen. These methodologies have garnered considerable attention since they are effective in the reduction of organonitriles, whose end products are extensively applied in synthetic organic chemistry. In this review, we summarize the development of selective hydroborylation, hydrosilylation, dihydroborysilylation, and hydrogenation of organonitriles, as well as their reaction mechanisms and the role of metal complexes in the catalytic cycles. This review article explains various synthetic methodologies applied toward the reduction of organonitriles into corresponding amines.

B–N/B–H Transborylation: borane-catalysed nitrile hydroboration

The reduction of nitriles to primary amines is a useful transformation in organic synthesis, however, it often relies upon stoichiometric reagents or transition-metal catalysis. Herein, a borane-catalysed hydroboration of nitriles to give primary amines is reported. Good yields (48–95%) and chemoselectivity (e.g., ester, nitro, sulfone) were observed. DFT calculations and mechanistic studies support the proposal of a double B–N/B–H transborylation mechanism.

Applications of catalysis in hydroboration of imines, nitriles, and carbodiimides

The catalytic hydroboration of imines, nitriles, and carbodiimides is a powerful method of preparing amines which are key synthetic intermediates in the synthesis of many value-added products. Imine hydroboration has perennially featured in notable reports while nitrile and carbodiimide hydroboration have gained attention recently. Initial developments in catalytic hydroboration of imines and nitriles employed precious metals and typically required harsh reaction conditions. More recent advances have shifted toward the use of base metal and main group element catalysis and milder reaction conditions. In this survey, we review metal and nonmetal catalyzed hydroboration of these unsaturated organic molecules and group them into three distinct categories: precious metals, base metals, and main group catalysts. The TON and TOF of imine hydroboration catalysts are reported and summarized with a brief overview of recent advances in the field. Mechanistic and kinetic studies of some of these protocols are also presented.

s-Block Metal Catalysts for the Hydroboration of Unsaturated Bonds

The addition of a B-H bond to an unsaturated bond (polarized or unpolarized) is a powerful and atom-economic tool for the synthesis of organoboranes. In recent years, s-block organometallics have appeared as alternative catalysts to transition-metal complexes, which traditionally catalyze the hydroboration of unsaturated bonds. Because of the recent and rapid development in the field of hydroboration of unsaturated bonds catalyzed by alkali (Li, Na, K) and alkaline earth (Mg, Ca, Sr, Ba) metals, we provide a detailed and updated comprehensive review that covers the synthesis, reactivity, and application of s-block metal catalysts in the hydroboration of polarized as well as unsaturated carbon-carbon bonds. Moreover, we describe the main reaction mechanisms, providing valuable insight into the reactivity of the s-block metal catalysts. Finally, we compare these s-block metal complexes with other redox-neutral catalytic systems based on p-block metals including aluminum complexes and f-block metal complexes of lanthanides and early actinides. In this review, we aim to provide a comprehensive, authoritative, and critical assessment of the state of the art within this highly interesting research area.

Bicyclic (alkyl)(amino)carbene (BICAAC) as a metal-free catalyst for reduction of nitriles to amines

Bicyclic (alkyl)(amino)carbene (BICAAC) is introduced as a metal-free catalyst for the reduction of various nitriles to the corresponding amine hydrochloride salts in the presence of pinacolborane. Mechanistic investigations combining experiments and DFT calculations suggest a B-H addition to the carbene center, which acts as a carrier of the hydride source.

Highly efficient Ti-catalyst for deoxygenative reduction of esters at ambient conditions: experimental and mechanistic insights from DFT Study

In this paper, we report the synthesis of dianionic amidophosphineborane–supported titanium chloride [{Ph2P(BH3)N}2C6H4}TiCl2] (1) and TiIV alkyl complex [{Ph2P(BH3)N}2C6H4}Ti(CH2SiMe3)2] (2) using salt metathesis reaction. The TiIV complex 1 was obtained...

Spin-state crossover in photo-catalyzed nitrile dihydroboration via Mn-thiolate cooperation

The role of a phosphine-free SNS-pincer ligand in metal–ligand cooperative hydroboration catalysis was investigated. The bifunctional thiolate donor and spin-state change to high-spin Mn are crucial to accessing low-energy activation barriers.

Catalyst-Free Reductions of Nitriles to Amino-Boranes Using Sodium Amidoborane and Lithium Borohydride

An efficient and facile method to reduce nitriles to amine-boranes was developed. Aromatic and aliphatic nitriles were readily reduced in the presense of both sodium amidoborane (NaAB) and LiBH4 at...

Lithium and magnesium complexes from the employment of pyridyl-pendanted unsymmetrical β-diketiminates: syntheses and utilization as catalysts for the hydroboration of carbonyl compounds

The push for environmentally benign and sustainable chemical processes has reinforced the demand to displace transition metals with cheap, nontoxic and naturally abundant metals. To fulfil this requirement, we endeavored...

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Pincer-Supported Gallium Complexes for the Catalytic Hydroboration of Aldehydes, Ketones and Carbon Dioxide

Gallium hydrides stabilised by primary and secondary amines are scarce due to their propensity to eliminate dihydrogen. Consequently, their reactivity has received limited attention. The synthesis of two novel gallium hydride complexes HGa(THF)[ON(H)O] and H₂Ga[μ²‐ON(H)O]Ga[ON(H)O] ([ON(H)O]²⁻=N,N‐bis(3,5‐di‐tert‐butyl‐2‐phenoxy)amine) is described and their reactivity towards aldehydes and ketones is explored. These reactions afford alkoxide‐bridged dimers through 1,2‐hydrogallation reactions. The gallium hydrides can be regenerated through Ga−O/B−H metathesis from the reaction of such dimers with pinacol borane (HBpin) or 9‐borabicyclo[3.3.1]nonane (9‐BBN). These observations allowed us to target the catalytic reduction of carbonyl substrates (aldehydes, ketones and carbon dioxide) with low catalyst loadings at room temperature.

Catalytic hydroboration of carbonyl derivatives by using phosphinimino amide ligated magnesium complexes

Reduction of carbonyl derivatives by using Earth-abundant, cheap, and environmentally benign metal-based catalysts through an atom-efficient method is a challenging task. Herein, we report the synthesis and characterization of dinuclear magnesium complexes 1-3 chelated by a phosphinimino amide skeleton. In combination with pinacolborane (HBpin) as a reducing agent, complex 1 bearing an ortho-methyl substituent on the phenyl ring of the ligand showed excellent reduction capability for a broad range of carbonyl derivatives under mild reaction conditions. Aldehydes, ketones, and acrolein substrates were efficiently reduced to the corresponding alkoxy-borane products with a record high TOF. Besides, acrolein derivatives were exclusively reduced to 1,2-regioselective products. Using two equiv. of HBpin, ester substrates were reduced to two kinds of alkoxy-borane products. Carbonate reduction accomplished by using complex 1 and three equiv. of HBpin afforded diols and a methanol precursor, respectively. When chiral substrates such as (S)-1,2-propanediol carbonate and L-lactide or polymeric P(L-LA) were employed, the chirality was almost retained in their reductive products.

Progressing the Frustrated Lewis Pair Abilities of N-Heterocyclic Carbene/GaR3 Combinations for Catalytic Hydroboration of Aldehydes and Ketones

Exploiting the steric incompatibility of the tris(alkyl)gallium GaR₃ (R = CH₂SiMe₃) and the bulky N-heterocyclic carbene (NHC) 1,3-bis(tert-butyl)imidazol-2-ylidene (ItBu), here we report the B-H bond activation of pinacolborane (HBPin), which has led to the isolation and structural authentication of a novel ion pair, [{ItBu-BPin}⁺{GaR₃(μ-H)GaR₃}^-] (2). Contrastingly, neither ItBu or GaR₃ was able to react with HBPin under the conditions of this study. Combining an NHC-stabilized borenium cation, [{ItBu-BPin}⁺], with an anionic dinuclear gallate, [{GaR₃(μ-H)GaR₃}^-], 2 proved to be unstable in solution at room temperature, evolving to the abnormal NHC-Ga complex [BPinC{{N(tBu)]₂CHCGa(R)₃}] (3). Interestingly, the structural isomer of 2, with the borenium cation residing at the C4 position of the carbene, [{aItBu-BPin}⁺{GaR₃(μ-H)GaR₃}^-] (4), was obtained when the abnormal NHC complex [aItBu·GaR₃] (1) was heated to 70 °C with HBPin, demonstrating that, under these forced conditions, it is possible to induce thermal frustration of the Lewis base/Lewis acid components of 1, enabling the activation of HBPin. Building on these stoichiometric studies, the frustrated Lewis pair (FLP) reactivity observed for the GaR₃/ItBu combination with HBPin could then be upgraded to catalytic regimes, allowing the efficient hydroboration of a range of aldehydes and ketones under mild reaction conditions. Mechanistic insights into the possible reaction pathway involved in this process have been gained by combining kinetic investigations with a comparative study of the catalytic capabilities of several gallium and borenium species related to 2. Disclosing a new cooperative partnership, reactions are proposed to occur via the formation of a highly reactive monomeric hydride gallate, [{ItBu-BPin}⁺{GaR₃(H)}^-] (I). Each anionic and cationic component of I plays a key role for success of the hydroboration, with the nucleophilic monomeric gallate anion favoring the transfer of its hydride to the C═O bond of the organic substate, which in turn is activated by coordination to the borenium cation.

Manganese-Catalyzed Hydroborations with Broad Scope

Reductive transformations of easily available oxidized matter are at the heart of synthetic manipulation and chemical valorization. The applications of catalytic hydrofunctionalization benefit from the use of liquid reducing agents and operationally facile setups. Metal‐catalyzed hydroborations provide a highly prolific platform for reductive valorizations of stable C=X electrophiles. Here, we report an especially facile, broad‐scope reduction of various functions including carbonyls, carboxylates, pyridines, carbodiimides, and carbonates under very mild conditions with the inexpensive pre‐catalyst Mn(hmds)₂. The reaction could be successfully applied to depolymerizations.

Direct CO2 capture and conversion to fuels on magnesium nanoparticles under ambient conditions simply using water

Converting CO₂ directly from the air to fuel under ambient conditions is a huge challenge. Thus, there is an urgent need for CO₂ conversion protocols working at room temperature and atmospheric pressure, preferentially without any external energy input. Herein, we employ magnesium (nanoparticles and bulk), an inexpensive and the eighth-most abundant element, to convert CO₂ to methane, methanol and formic acid, using water as the sole hydrogen source. The conversion of CO₂ (pure, as well as directly from the air) took place within a few minutes at 300 K and 1 bar, and no external (thermal, photo, or electric) energy was required. Hydrogen was, however, the predominant product as the reaction of water with magnesium was favored over the reaction of CO₂ and water with magnesium. A unique cooperative action of Mg, basic magnesium carbonate, CO₂, and water enabled this CO₂ transformation. If any of the four components was missing, no CO₂ conversion took place. The reaction intermediates and the reaction pathway were identified by ¹³CO₂ isotopic labeling, powder X-ray diffraction (PXRD), nuclear magnetic resonance (NMR) and in situ attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and rationalized by density-functional theory (DFT) calculations. During CO₂ conversion, Mg was converted to magnesium hydroxide and carbonate, which may be regenerated. Our low-temperature experiments also indicate the future prospect of using this CO₂-to-fuel conversion process on the surface of Mars, where CO₂, water (ice), and magnesium are abundant. Thus, even though the overall process is non-catalytic, it could serve as a step towards a sustainable CO₂ utilization strategy as well as potentially being a first step towards a magnesium-driven civilization on Mars.

We demonstrated the use of magnesium nanoparticles (and bulk) to convert CO₂ (pure & also from the air) to methane, methanol, formic acid and green cement without external energy within a few minutes, using only water as the sole hydrogen source.

Expected and Unexpected Reactivities of Homoleptic LiNacNac and Heteroleptic NacNacMg(TMP) β-Diketiminates toward Various Small Unsaturated Organic Molecules

Homoleptic LiNacNac forms simple donor-acceptor complexes with N,N'-dicyclohexylcarbodiimide (CyN═C═NCy), triphenylphosphine oxide (Ph₃P═O), and benzophenone (Ph₂CO). These crystallographically characterized compounds could be regarded as model intermediates en route to reducing the N═C, P═O, and C═O bonds of unsaturated substrates. Heteroleptic NacNacMg(TMP) intriguingly functions as a TMP nucleophile both with t-BuNCO and t-BuNCS, producing a urea or thiourea derivative respectively attached to Mg, though the NacNac ligand in the former reaction also engages noninnocently with a second t-BuNCO molecule via insertion at the reactive NacNac backbone γ-carbon site.

Hydroboration of Nitriles, Esters, and Carbonates Catalyzed by Simple Earth-Abundant Metal Triflate Salts

During the past decade earth-abundant metals have become increasingly important in homogeneous catalysis. One of the reactions in which earth-abundant metals have found important applications is the hydroboration of unsaturated C-C and C-X bonds (X=O or N). Within these set of transformations, the hydroboration of challenging substrates such as nitriles, carbonates and esters still remain difficult and often relies on elaborate ligand designs and highly reactive catalysts (e. g., metal alkyls/hydrides). Here we report an effective methodology for the hydroboration of challenging C≡N and C=O bonds that is simple and applicable to a wide set of substrates. The methodology is based on using a manganese(II) triflate salt that, in combination with commercially available potassium tert-butoxide and pinacolborane, catalyzes the hydroboration of nitriles, carbonates, and esters at room temperature and with near quantitative yields in less than three hours. Additional studies demonstrated that other earth-abundant metal triflate salts can facilitate this reaction as well, which is further discussed in this report.

Reactivity of a magnesium diboranate with organic nitriles

A series of complexes generated through reactions of the β-diketiminato magnesium diboranate species, [(BDI)Mg{(n-Bu)pinB-Bpin}] (BDI = HC{(Me)CNDipp}2; Dipp = 2,6-di-iso-propylphenyl), and a variety of organic nitriles are reported. Although, in every case, the diboranate anion acts as a surrogate source of the {Bpin} nucleophile, resulting in B-C bond formation at the electrophilic sp-hydridised nitrile carbon, the resultant compounds display a variable propensity to undergo subsequent reaction with additional nitrile equivalents. This behaviour is rationalised to be a consequence of substituent-dependent modulation in the basicity and resultant electrophilicity of magnesium-coordinated nitrile intermediates.

Hydroboration of nitriles and imines by highly active zinc dihydride catalysts

Eco-friendly zinc dihydrides stabilized by N-heterocyclic carbenes were demonstrated to be highly efficient catalysts for the double hydroboration of nitriles with pinacolborane, exhibiting turnover frequencies up to 3000 h⁻¹ at room temperature under solvent-free conditions. The reactions afforded corresponding diboronated amines with excellent yields and good functional group tolerance. A single Zn–H insertion product was isolated from a stoichiometric reaction of zinc dihydride with nitrile, and was proved to be an active species in this transformation. Kinetic studies were performed to give some insights into the catalytic reactions. In addition, zinc dihydride species also showed high activity for the hydroboration of imines to boronated amines.

Molecular zinc dihydrides were found to be highly efficient catalysts for the hydroboration of nitriles and imines at room temperature under solvent-free conditions.