A seven-dimensional quantum dynamics study of the dissociative chemisorption of H2O on Cu(111): effects of azimuthal angles and azimuthal angle-averaging

Six-dimensional quantum dynamics study for the dissociative chemisorption of H2 on pure and alloyed AgAu surfaces

The 6D time-dependent wave packet calculations were performed to explore H2 dissociation on Ag, Au, and two AgAu alloy surfaces, using four newly fitted potential energy surfaces based on the neural network fitting to density functional theory energy points. The ligand effect resulting from the Ag-Au interaction causes a reduction in the barrier height for H2+Ag/Au(111) compared to H2+Ag(111). However, the scenario is reversed for H2+Au/Ag(111) and H2+Au(111). The 6D dissociation probabilities of H2 on Ag/Au(111) surfaces are significantly higher than those on the pure Ag(111) surface, but the corresponding results for H2 on Au/Ag(111) surfaces are substantially lower than those on the pure Au(111) surface. The reactivity of H2 on Au(111) is larger than that on Ag(111), despite Ag(111) having a slightly lower static barrier height. This can be attributed to the exceptionally small dissociation probabilities at the hcp and fcc regions, which are at least 100 times smaller compared to those at the bridge or top site for H2+Ag(111). Due to the late barrier being more pronounced, the vibrational excitation of H2 on Ag(111) is more effective in promoting the reaction than on Au(111). Moreover, a high degree of alignment dependence is detected for the four reactions, where the H2 dissociation has the highest probability at the helicopter alignment, as opposed to the cartwheel alignment.

Charge-Transfer-Controlled Quantum Dynamics of HCl Dissociation on the Ag/Au(111) Bimetallic Alloy Surface

Understanding polar molecule dynamics on bimetallic surfaces, especially electropositivity and electronegativity, remains a challenge. Here, we report the reactivity of HCl on a strained Ag monolayer on Au(111) using six-dimensional quantum dynamics with a new machine-learning-based potential energy surface. Surprisingly, HCl reactivity is significantly suppressed by the Ag-Au interaction despite a lower HCl+Ag/Au(111) barrier than pure Ag(111). This arises from charge transfer between Ag and Au, where electronegative Au makes the top Ag layer on Ag/Au(111) electropositive, unlike that on pure Ag(111). Electropositive Ag in HCl+Ag/Au(111) attracts Cl, yielding an unfavorable H-Cl configuration and reduced reactivity. These findings deepen our understanding of polar molecule interactions on bimetallic surfaces, highlighting the role of charge transfer in dissociative chemisorption and the implications for catalyst design in heterogeneous catalysis.

Quantum dynamics reveal different ligand effects by vibrational excitation in the dissociative chemisorption of HCl on the Au/Ag(111) surface

The reactivity and selectivity of bimetallic surfaces are of fundamental importance in industrial applications. Here, we report the first six-dimensional (6D) quantum dynamics study for the role of surface strain and ligand effects on the reactivity of HCl on a strained pseudomorphic monolayer of Au deposited onto a Ag(111) substrate, with the aid of accurate machine learning-based potential energy surfaces. The substitute of Au into Ag changes the location of the transition state; however, the static barrier height remains roughly the same as pure Au(111). The 6D quantum dynamics calculations reveal that the surface strain due to lattice expansion slightly enhances the reactivity. The ligand effect due to electronic structure interactions between Au and Ag substantially suppresses the reactivity of HCl in the ground vibrational state but promotes the reactivity via vibrational excitation at high kinetic energies. This finding can be attributed to more close interaction with Ag atoms at the transition state close to the fcc site, as well as the tight transition-state region, making the vibrational excitation highly efficient in enhancing the reactivity. Our study quantitatively unravels the dynamical origin of reactivity control by two metals, which will ultimately provide valuable insight into the selectivity of the catalyst.

Multilayer Multiconfiguration Time-Dependent Hartree Study on the Mode-/Bond-Specific Quantum Dynamics of Water Dissociation on Cu(111)

In this work, full-dimensional (9D) quantum dynamics calculations on mode-/bond-specific surface scattering of a water molecule on a copper (111) rigid surface are performed through the multilayer multiconfiguration time-dependent Hartree (ML-MCTDH) method. To easily perform the ML-MCTDH calculations on such a triatomic molecule-surface system, we first choose specific Jacobi coordinates as a set of coordinates of water. Next, to efficiently perform the 9D ML-MCTDH wavepacket propagation, the potential energy surface is transferred to a canonical polyadic decomposition form with the aid of a Monte Carlo-based method. Excitation-specific dissociation probabilities of H₂O on Cu(111) are computed, and mode-/bond-specific dynamics are demonstrated by comparison with a probability curve computed for a water molecule in the ground state. The dependence of the dissociation probability of the initial state of H₂O is studied, and it is found that the excitation-specific dissociation probabilities can be divided into three groups. We find that the vibrationally excited states enhance the dissociation reactivity of H₂O, while the rotationally excited states hardly influence it.

Adiabatic models for the quantum dynamics of surface scattering with lattice effects

In this contribution, we review models for the lattice effects in quantum dynamics calculations on surface scattering, which is important to modeling heterogeneous catalysis for achieving an interpretation of experimental measurements. Unlike dynamics models for reactions in the gas phase, those for heterogeneous reactions have to include the effects of the surface. For manageable computational costs in calculations, the effects of static surface (SS) are firstly modeled as this is simply and easily implemented. Then, the SS model has to be improved to include the effects of the flexible surface, that is the lattice effects. To do this, various surface models have been designed where the coordinates of the surface atoms are introduced in the Hamiltonian operator, especially those of the top surface atom. Based on this model Hamiltonian operator, extensive multi-dimension quantum dynamics calculations can be performed to recover the lattice effects. Here, we first review an overview of the techniques in constructing the Hamiltonian operator, which is a sum of the kinetic energy operator (KEO) and potential energy surface (PES). Since the PES containing the coordinates of the surface atoms in a cell is still expensive, the SS model is often accepted. We consider a mathematical model, called the coupled harmonic oscillator (CHO) model, to introduce the concepts of adiabatic and diabatic representations for separating the molecule and surface. Under the adiabatic model, we further introduce the expansion model where the potential function is Taylor expanded around the optimized geometry of the surface. By an expansion model truncated at the first and second order, various coupling surface models between the molecule and surface are derived. Moreover, by further and deeply understanding the adiabatic representation, an effective Hamiltonian operator is obtained by optimizing the total wave function in factorized form. By this factorized form of wave function and effective Hamiltonian operator, the geometry phase of the surface wave function is theoretically found. This theoretical prediction may be measured by carefully designing experiments. Finally, discussions on the adiabatic representation, the PES construction, and possibility of the classical-dynamics solutions are given. Based on these discussions, a simple outlook on the dynamics of photocatalytics is finally given.

Mode Selective Chemistry for the Dissociation of Methane on Efficient Ni/Pt-Bimetallic Alloy Catalysts

The mode selectivity of methane dissociation is studied on three different Ni/Pt-bimetallic alloy surfaces using a fully quantum approach based on reaction path Hamiltonian. Dissociative sticking probability depends on the...

A full-dimensional ab initio potential energy and dipole moment surfaces for (NH3)2

A full-dimensional ab initio potential energy surface (PES) and dipole moment surface (DMS) for the ammonia dimer (NH₃)₂ are reported. The database of the PES consists of 27 736 ab initio energy points and all of these points were calculated at the UCCSD(T)-F12a/AVTZ level. The PES was fitted by using the fundamental invariant neural network (FI-NN) method that satisfies the permutational symmetry of identical atoms, and the root mean square fitting error for the PES is very small as low as 0.562 meV. The geometries for the (NH₃)₂ DMS are the same as those used for the PES and are calculated at the XYG3/AVTZ level. This PES can describe a variety of internal floppy motions, including all kinds of vibrational modes no matter intermolecular or intramolecular. The CCSD(T)-PES can dissociate correctly to two NH₃ monomers, with D_e = 1135.55 cm^-1 (13.58 kJ/mol) which agrees accurately with the 13.5 ± 0.3 kJ/mol predicted by previous work.

Computational approaches to dissociative chemisorption on metals: towards chemical accuracy

We review the state-of-the-art in the theory of dissociative chemisorption (DC) of small gas phase molecules on metal surfaces, which is important to modeling heterogeneous catalysis for practical reasons, and for achieving an understanding of the wealth of experimental information that exists for this topic, for fundamental reasons. We first give a quick overview of the experimental state of the field. Turning to the theory, we address the challenge that barrier heights (E_b, which are not observables) for DC on metals cannot yet be calculated with chemical accuracy, although embedded correlated wave function theory and diffusion Monte-Carlo are moving in this direction. For benchmarking, at present chemically accurate E_b can only be derived from dynamics calculations based on a semi-empirically derived density functional (DF), by computing a sticking curve and demonstrating that it is shifted from the curve measured in a supersonic beam experiment by no more than 1 kcal mol^-1. The approach capable of delivering this accuracy is called the specific reaction parameter (SRP) approach to density functional theory (DFT). SRP-DFT relies on DFT and on dynamics calculations, which are most efficiently performed if a potential energy surface (PES) is available. We therefore present a brief review of the DFs that now exist, also considering their performance on databases for E_b for gas phase reactions and DC on metals, and for adsorption to metals. We also consider expressions for SRP-DFs and briefly discuss other electronic structure methods that have addressed the interaction of molecules with metal surfaces. An overview is presented of dynamical models, which make a distinction as to whether or not, and which dissipative channels are modeled, the dissipative channels being surface phonons and electronically non-adiabatic channels such as electron-hole pair excitation. We also discuss the dynamical methods that have been used, such as the quasi-classical trajectory method and quantum dynamical methods like the time-dependent wave packet method and the reaction path Hamiltonian method. Limits on the accuracy of these methods are discussed for DC of diatomic and polyatomic molecules on metal surfaces, paying particular attention to reduced dimensionality approximations that still have to be invoked in wave packet calculations on polyatomic molecules like CH₄. We also address the accuracy of fitting methods, such as recent machine learning methods (like neural network methods) and the corrugation reducing procedure. In discussing the calculation of observables we emphasize the importance of modeling the properties of the supersonic beams in simulating the sticking probability curves measured in the associated experiments. We show that chemically accurate barrier heights have now been extracted for DC in 11 molecule-metal surface systems, some of which form the most accurate core of the only existing database of E_b for DC reactions on metal surfaces (SBH10). The SRP-DFs (or candidate SRP-DFs) that have been derived show transferability in many cases, i.e., they have been shown also to yield chemically accurate E_b for chemically related systems. This can in principle be exploited in simulating rates of catalyzed reactions on nano-particles containing facets and edges, as SRP-DFs may be transferable among systems in which a molecule dissociates on low index and stepped surfaces of the same metal. In many instances SRP-DFs have allowed important conclusions regarding the mechanisms underlying observed experimental trends. An important recent observation is that SRP-DFT based on semi-local exchange DFs has so far only been successful for systems for which the difference of the metal work function and the molecule's electron affinity exceeds 7 eV. A main challenge to SRP-DFT is to extend its applicability to the other systems, which involve a range of important DC reactions of e.g. O₂, H₂O, NH₃, CO₂, and CH₃OH. Recent calculations employing a PES based on a screened hybrid exchange functional suggest that the road to success may be based on using exchange functionals of this category.

A fundamental invariant-neural network representation of quasi-diabatic Hamiltonians for the two lowest states of H3

The FI-NN approach is capable of representing highly accurate diabatic PESs with particular and complicated symmetry problems.

Physisorbed State Regulates the Dissociation Mechanism of H2O on Ni(100)

Water dissociation is a key step in many industrial catalytic processes. The dissociation of H₂O on a rigid Ni(100) surface was investigated by the quantum instanton method with a full-dimensional potential energy surface. The calculated free-energy barrier maps showed that the free-energy barrier varied dramatically with the surface site. The free-energy well map demonstrated that the physisorption well of H₂O was existent at all of the surface sites, and H₂O could be dissociated by both the direct and steady-state processes. The calculated direct dissociation rate constants at different surface sites decreased rapidly in the order transition state (TS) > bridge > top > hollow. The steady-state dissociation rate constants had the same trend as that of the direct process but the steady-state dissociation rate constant at the top site became the largest at high temperatures. The direct dissociation rate constants were always larger than those of the steady-state process at a given temperature. The calculated kinetic isotope effects for the direct and steady-state processes were extremely large at low temperatures, which was caused by the zero-point energy correction and remarkable quantum tunneling. From low temperature to high temperature, H₂O would undergo stable molecular adsorption at the top site, steady-state dissociation at the TS site, direct rupture at the TS site, and direct decomposition at the impact site.

Exclusive Neural Network Representation of the Quasi-Diabatic Hamiltonians Including Conical Intersections

We propose a numerically simple and straightforward, yet accurate and efficient neural networks-based fitting strategy to construct coupled potential energy surfaces (PESs) in a quasi-diabatic representation. The fundamental invariants are incorporated to account for the complete nuclear permutation inversion symmetry. Instead of derivative couplings or interstate couplings, a so-called modified derivative coupling term is fitted by neural networks, resulting in accurate description of near degeneracy points, such as the conical intersections. The adiabatic energies, energy gradients, and derivative couplings are well reproduced, and the vanishing of derivative couplings as well as the isotropic topography of adiabatic and diabatic energies in asymptotic regions are automatically satisfied. All of these features of the coupled global PESs are requisite for accurate dynamics simulations. Our approach is expected to be very useful in developing highly accurate coupled PESs in a quasi-diabatic representation in an efficient machine learning-based way.

High-Fidelity Potential Energy Surfaces for Gas-Phase and Gas-Surface Scattering Processes from Machine Learning

In this Perspective, we review recent advances in constructing high-fidelity potential energy surfaces (PESs) from discrete ab initio points, using machine learning tools. Such PESs, albeit with substantial initial investments, provide significantly higher efficiency than direct dynamics methods and/or high accuracy at a level that is not affordable by on-the-fly approaches. These PESs not only are a necessity for quantum dynamical studies because of delocalization of wave packets but also enable the study of low-probability and long-time events in (quasi-)classical treatments. Our focus here is on inelastic and reactive scattering processes, which are more challenging than bound systems because of the involvement of continua. Relevant applications and developments for dynamical processes in both the gas phase and at gas-surface interfaces are discussed.

Efficient Vibrational Energy Redistribution between Stretching Modes: State-to-State Quantum Scattering of H_{2}O from Cu(111)

State-to-state scattering dynamics of H_{2}O from Cu(111) has been studied by a fully coupled quantum mechanical model which explicitly accounts for the most important molecular degrees of freedom, based on a first-principles determined potential energy surface. When H_{2}O in its antisymmetric O-H stretching vibration (ν_{3}) collides with the surface, we find that the intramolecular vibrational energy redistribution (IVR) is predominant from ν_{3} to the symmetric stretching mode (ν_{1}), while rather inefficient to the bending mode (ν_{2}). This mode-specific IVR results from the strong couplings between stretching modes, which equally dispose the initial energy in ν_{3} into local stretching modes differing by a phase factor. Given the number of stretching modes in H_{2}O and CH_{4}, this mechanism naturally explains why the product ν_{1}/ν_{3} ratio calculated here is ∼3 times over that recently measured for CH_{4} scattering on Ni(111), suggesting that the nonstatistical IVR is more general than expected in polyatomic molecules.

Dynamics in reactions on metal surfaces: A theoretical perspective

Recent advances in theoretical characterization of reaction dynamics on metal surfaces are reviewed. It is shown that the widely available density functional theory of metals and their interactions with molecules have enabled first principles theoretical models for treating surface reaction dynamics. The new theoretical tools include methods to construct high-dimensional adiabatic potential energy surfaces, to characterize nonadiabatic processes within the electronic friction models, and to describe dynamics both quantum mechanically and classically. Three prototypical surface reactions, namely, dissociative chemisorption, Eley-Rideal reactions, and recombinative desorption, are surveyed with a focus on some representative examples. While principles governing gas phase reaction dynamics may still be applicable, the presence of the surface introduces a higher level of complexity due to strong interaction between the molecular species and metal substrate. Furthermore, most of these reactive processes are impacted by energy exchange with surface phonons and/or electron-hole pair excitations. These theoretical studies help to interpret and rationalize experimental observations and, in some cases, guide experimental explorations. Knowledge acquired in these fundamental studies is expected to impact many practical problems in a wide range of interfacial processes.

Stochastic wave packet approach to nonadiabatic scattering of diatomic molecules from metals

In this contribution, we present a quantum dynamical approach to study inelastic scattering of diatomic molecules from metal surfaces at normal incidence. The dissipative dynamics obeys a stochastic Schrödinger equation describing the time-evolution of the system as a piecewise deterministic process. Energy exchange between the molecular vibrational degrees of freedom and the metal electrons is represented using operators in tensor product form, which are coupled via anharmonic transition rates calculated from first-order perturbation theory. Full dimensional observables are obtained by averaging over simulations in 4D-including the internal stretch, the distance to the surface, and the orientation angles-at different surface sites. The method is applied to the state-resolved scattering of vibrationally excited NO from Au(111), revealing important channels for quantized energy relaxation.

Reactive and Nonreactive Scattering of HCl from Au(111): An Ab Initio Molecular Dynamics Study

The HCl + Au(111) system has recently become a benchmark for highly activated dissociative chemisorption, which presumably is strongly affected by electron-hole pair excitation. Previous dynamics calculations, which were based on density functional theory at the generalized gradient approximation level (GGA-DFT) for the molecule-surface interaction, have all overestimated measured reaction probabilities by at least an order of magnitude. Here, we perform ab initio molecular dynamics (AIMD) and AIMD with electronic friction (AIMDEF) calculations employing a density functional that includes the attractive van der Waals interaction. Our calculations model the simultaneous and possibly synergistic effects of surface temperature, surface atom motion, electron-hole pair excitation, the molecular beam conditions of the experiments, and the van der Waals interaction on the reactivity. We find that reaction probabilities computed with AIMDEF and the SRP32-vdW functional still overestimate the measured reaction probabilities, by a factor 18 for the highest incidence energy at which measurements were performed (≈2.5 eV). Even granting that the experiment could have underestimated the sticking probability by about a factor three, this still translates into a considerable overestimation of the reactivity by the current theory. Likewise, scaled transition probabilities for vibrational excitation from ν = 1, j = 1 to ν = 2 are overestimated by the AIMDEF theory, by factors 3-8 depending on the initial conditions modeled. Energy losses to the surface and translational energy losses are, however, in good agreement with experimental values.

Representation of coupled adiabatic potential energy surfaces using neural network based quasi-diabatic Hamiltonians: 1,2 2A′ states of LiFH

A general algorithm for determining diabatic representations from adiabatic energies, energy gradients and derivative couplings using neural networks is introduced.

Two-state diabatic potential energy surfaces of ClH2 based on nonadiabatic couplings with neural networks

A neural network-fitting procedure based on nonadiabatic couplings is proposed to generate two-state diabatic PESs with conical intersections.

Hot electron effects during reactive scattering of H2 from Ag(111): assessing the sensitivity to initial conditions, coupling magnitude, and electronic temperature

We use an analytical representation of electronic friction for H₂ on Ag(111) to assess the validity and robustness of the MDEF method based on TDPT.

Water dissociating on rigid Ni(100): A quantum dynamics study on a full-dimensional potential energy surface

We constructed a nine-dimensional (9D) potential energy surface (PES) for the dissociative chemisorption of H₂O on a rigid Ni(100) surface using the neural network method based on roughly 110 000 energies obtained from extensive density functional theory (DFT) calculations. The resulting PES is accurate and smooth, based on the small fitting errors and the good agreement between the fitted PES and the direct DFT calculations. Time dependent wave packet calculations also showed that the PES is very well converged with respect to the fitting procedure. The dissociation probabilities of H₂O initially in the ground rovibrational state from 9D quantum dynamics calculations are quite different from the site-specific results from the seven-dimensional (7D) calculations, indicating the importance of full-dimensional quantum dynamics to quantitatively characterize this gas-surface reaction. It is found that the validity of the site-averaging approximation with exact potential holds well, where the site-averaging dissociation probability over 15 fixed impact sites obtained from 7D quantum dynamics calculations can accurately approximate the 9D dissociation probability for H₂O in the ground rovibrational state.

Rotational and steric effects in water dissociative chemisorption on Ni(111)

Powerful laser techniques have recently enabled quantum-state resolved molecular beam experiments for investigating gas-surface reactions, which have unveiled intriguing vibrational, rotational, and also steric effects. For reactions involving polyatomic molecules, e.g., the dissociative chemisorption of methane and water, the rotational and related steric effects are far less understood despite a large body of theoretical work having been able to reproduce the observed vibrational mode specificity and related bond selectivity semi-quantitatively or even within chemical accuracy. Herein, we report a high dimensional quantum dynamics study of water dissociation on Ni(111) on a first-principles potential energy surface, focusing on the reactivities of D2O in various rotational quantum states with different spatial orientations. Through an accurate quantum mechanical description of this asymmetric top, remarkable dependence of the reactivity on the orientation is observed. This dependence is site specific and rotational state specific. These single site rotational and steric effects are partially justified by a sudden model on the basis of the overlap between the rotational wavefunctions and the angular potential near the transition state, but rotational steering also plays a significant role which complicates the dynamics. Although site averaging weakens the influence of initial rotational excitations and leads to minor effects to the reactivity, steric effects are predicted to be observable if the water molecule is selectively excited and aligned by a linearly polarized laser.

An approximate full-dimensional quantum dynamics study of the mode specificity in the dissociative chemisorption of D2O on rigid Cu(111)

The approximate 9D dissociation probabilities for D₂O/Cu(111) are obtained to investigate the influence of mode specificity on reaction dynamics.

Effects of Lattice Motion on Dissociative Chemisorption: Toward a Rigorous Comparison of Theory with Molecular Beam Experiments

The dissociative chemisorption of small molecules such as methane and water on metal surfaces is a key step in many important catalyzed reactions. However, it has only very recently become possible to directly compare theory with molecular beam studies of these reactions. For most experimental conditions, such a comparison requires accurate methods for introducing the effects of lattice motion into quantum reactive scattering calculations. We examine these methods and their recent application to methane and water dissociative chemisorption. New results are presented for CO₂ chemisorption and methane dissociation at step edges. The type of molecule-lattice coupling that leads to a strong variation in the dissociative sticking of methane with temperature is shown to occur for many polyatomic-metal systems. Improvements to these models are discussed. The ability to accurately compare theory with molecular beam experiments should lead to improved density functionals and consequently more accurate thermal rate constants for these important reactions.

First-principles quantum dynamical theory for the dissociative chemisorption of H2O on rigid Cu(111)

Despite significant progress made in the past decades, it remains extremely challenging to investigate the dissociative chemisorption dynamics of molecular species on surfaces at a full-dimensional quantum mechanical level, in particular for polyatomic-surface reactions. Here we report, to the best of our knowledge, the first full-dimensional quantum dynamics study for the dissociative chemisorption of H2O on rigid Cu(111) with all the nine molecular degrees of freedom fully coupled, based on an accurate full-dimensional potential energy surface. The full-dimensional quantum mechanical reactivity provides the dynamics features with the highest accuracy, revealing that the excitations in vibrational modes of H2O are more efficacious than increasing the translational energy in promoting the reaction. The enhancement of the excitation in asymmetric stretch is the largest, but that of symmetric stretch becomes comparable at very low energies. The full-dimensional characterization also allows the investigation of the validity of previous reduced-dimensional and approximate dynamical models.