A flexible polymer confined inside a cone-shaped nano-channel

Ejection dynamics of a semiflexible polymer from a nanosphere

Polymer ejection has been of interest due to its relation to the viral genome ejection. However, the ejection dynamics of a semiflexible polymer from a nanosphere is not yet understood. Here, a theory is developed for the ejection dynamics of a polymer with total length L_{0} and persistence length l from a sphere of diameter D. These length scales define different confinement regimes to study the polymer dynamics. The polymer sometimes undergoes between two to three regimes during its ejection. The rate of change of the free energy of confinement is balanced by the rate of energy dissipation, in each regime. The polymer experiences a final stage in which the free energy of polymer attachment to the sphere governs the ejection. The total ejection time τ depends on the polymer dynamics in the various regimes that it passes through in the phase space. Dependence of the ejection time on the polymer length, the persistence length, and the sphere diameter τ∝L_{0}^{α}D^{β}l^{γ} is obtained from the theory. It is shown that α changes between 1 and 1.7, β between 3 and 5, and γ takes a zero or positive value often smaller than 1. Agreement of these exponents with other theory and simulations are discussed.

Polymer Translocation and Nanopore Sequencing: A Review of Advances and Challenges

Various biological processes involve the translocation of macromolecules across nanopores; these pores are basically protein channels embedded in membranes. Understanding the mechanism of translocation is crucial to a range of technological applications, including DNA sequencing, single molecule detection, and controlled drug delivery. In this spirit, numerous efforts have been made to develop polymer translocation-based sequencing devices, these efforts include findings and insights from theoretical modeling, simulations, and experimental studies. As much as the past and ongoing studies have added to the knowledge, the practical realization of low-cost, high-throughput sequencing devices, however, has still not been realized. There are challenges, the foremost of which is controlling the speed of translocation at the single monomer level, which remain to be addressed in order to use polymer translocation-based methods for sensing applications. In this article, we review the recent studies aimed at developing control over the dynamics of polymer translocation through nanopores.

Driven translocation of a semiflexible polymer through a conical channel in the presence of attractive surface interactions

We study the translocation of a semiflexible polymer through a conical channel with attractive surface interactions and a driving force which varies spatially inside the channel. Using the results of the translocation dynamics of a flexible polymer through an extended channel as control, we first show that the asymmetric shape of the channel gives rise to non-monotonic features in the total translocation time as a function of the apex angle of the channel. The waiting time distributions of individual monomer beads inside the channel show unique features strongly dependent on the driving force and the surface interactions. Polymer stiffness results in longer translocation times for all angles of the channel. Further, non-monotonic features in the translocation time as a function of the channel angle changes substantially as the polymer becomes stiffer, which is reflected in the changing features of the waiting time distributions. We construct a free energy description of the system incorporating entropic and energetic contributions in the low force regime to explain the simulation results.

Simulation Study of Chain-like Body Translocation through Conical Pores in Thick Membranes

Artificial membranes with conical pores and controllable thickness reveal ionic-transport capabilities that are superior compared with those offered by cylindrical pores. By simulating the translocation of an abstract chain-like body through a conical pore in a membrane with a variable thickness, we formulate a statistical model of the translocation time τ. Our rough model encodes the biochemical details of a given real chain-like molecule as evolving sequences of the allowed chain-like body’s conformations. In our simulation experiments, we focus primarily on pore geometry and kinetic aspects of the translocation process. We study the impact of the membrane thickness L, and both conical-pore diameters ϕcis,ϕtrans on the probability distribution of τ. We have found that for all considered simulation setups, the randomness of τ is accurately described by the family of Moyal distributions while its expected value τ is proportional to Lξ, with ξ being dependent on ϕcis,ϕtrans.

Crowding-induced polymer trapping in a channel

In this work, we report an intriguing phenomenon: crowding-induced polymer trapping in a channel. Using Langevin dynamics simulations and analytical calculations, we find that for a polymer confined in a channel, crowding particles can push a polymer into the channel corner through inducing an effective polymer-corner attraction due to the depletion effect. This phenomenon is referred to as polymer trapping. The occurrence of polymer trapping requires a minimum volume fraction of crowders, ϕ^{*}, which scales as ϕ^{*}∼(a_{c}/L_{p})^{1/3} for a_{c}≫a_{m} and ϕ^{*}∼(a_{c}/L_{p})^{1/3}(a_{c}/a_{m})^{1/2} for a_{c}≪a_{m}, where a_{c} is the crowder diameter, a_{m} is the monomer diameter, and L_{p} is the polymer persistence length. For DNA, ϕ^{*} is estimated to be around 0.25 for crowders with a_{c}=2nm. We find that ϕ^{*} also strongly depends on the shape of the channel cross section, and ϕ^{*} is much smaller for a triangle channel than a square channel. The polymer trapping leads to a nearly fully stretched polymer conformation along a channel corner, which may have practical applications, such as full stretching of DNA for the nanochannel-based genome mapping technology.

Free energy of a knotted polymer confined to narrow cylindrical and conical channels

Monte Carlo simulations are used to study the conformational behavior of a semiflexible polymer confined to cylindrical and conical channels. The channels are sufficiently narrow that the conditions for the Odijk regime are marginally satisfied. For cylindrical confinement, we examine polymers with a single knot of topology 3_{1}, 4_{1}, or 5_{1}, as well as unknotted polymers that are capable of forming S loops. We measure the variation of the free energy F with the end-to-end polymer extension length X and examine the effect of varying the polymer topology, persistence length P, and cylinder diameter D on the free-energy functions. Similarly, we characterize the behavior of the knot span along the channel. We find that increasing the knot complexity increases the typical size of the knot. In the regime of low X, where the knot/S-loop size is large, the conformational behavior is independent of polymer topology. In addition, the scaling properties of the free energy and knot span are in agreement with predictions from a theoretical model constructed using known properties of interacting polymers in the Odijk regime. We also examine the variation of F with the position of a knot in conical channels for various values of the cone angle α. The free energy decreases as the knot moves in a direction where the cone widens, and it also decreases with increasing α and with increasing knot complexity. The behavior is in agreement with predictions from a theoretical model in which the dominant contribution to the change in F is the change in the size of the hairpins as the knot moves to the wider region of the channel.

Dynamics of long hyaluronic acid chains through conical nanochannels for characterizing enzyme reactions in confined spaces

This research reports the transport behaviors of long flexible polymers (hyaluronic acid) through long conical track-etched nanochannels with and without grafted enzymes. The impacts of the channel diameter and the polymer regimes in solution (dilute and semi-dilute) have been investigated. Without enzymes, the experimental results can be well explained by the analytical models of the scaling law of de Gennes. Then, the corresponding enzymes (hyaluronidase) were grafted inside the channel. When enzymes are located at the base side, polymers get degraded at the entrance and the degraded products are detected. When enzymes are grafted at the tip side, the extension of translocation duration due to the binding of substrate-enzyme is observed. This is for the first time that the enzymatic degradation reactions are characterized in situ at the single molecule level by nanopore technology.

Polymer translocation into cavities: Effects of confinement geometry, crowding, and bending rigidity on the free energy

Monte Carlo simulations are used to study the translocation of a polymer into a cavity. Modeling the polymer as a hard-sphere chain with a length up to N=601 monomers, we use a multiple-histogram method to measure the variation of the conformational free energy of the polymer with respect to the number of translocated monomers. The resulting free-energy functions are then used to obtain the confinement free energy for the translocated portion of the polymer. We characterize the confinement free energy for a flexible polymer in cavities with constant cross-sectional area A for various cavity shapes (cylindrical, rectangular, and triangular) as well as for tapered cavities with pyramidal and conical shape. The scaling of the free energy with cavity volume and translocated polymer subchain length is generally consistent with predictions from simple scaling arguments, with small deviations in the scaling exponents likely due to finite-size effects. The confinement free energy depends strongly on cavity shape anisometry and is a minimum for an isometric cavity shape with a length-to-width ratio of unity. Entropic depletion at the edges or vertices of the confining cavity are evident in the results for constant-A and pyramidal cavities. For translocation into infinitely long cones, the scaling of the free energy with taper angle is consistent with a theoretical prediction employing the blob model. We also examine the effects of polymer bending rigidity on the translocation free energy for cylindrical cavities. For isometric cavities, the observed scaling behavior is in partial agreement with theoretical predictions, with discrepancies arising from finite-size effects that prevent the emergence of well-defined scaling regimes. In addition, translocation into highly anisometric cylindrical cavities leads to a multistage folding process for stiff polymers. Finally, we examine the effects of crowding agents inside the cavity. We find that the confinement free energy increases with crowder density. At constant packing fraction the magnitude of this effect lessens with increasing crowder size for a crowder-to-monomer size ratio ≥1.

Ratchet rectification effect on the translocation of a flexible polyelectrolyte chain

We report a three dimensional Langevin dynamics simulation of a uniformly charged flexible polyelectrolyte chain, translocating through an asymmetric narrow channel with periodically varying cross sections under the influence of a periodic external electric field. When reflection symmetry of the channel is broken, a rectification effect is observed with a favored direction for the chain translocation. For a given volume of the channel unit and polymer length, the rectification occurs below a threshold frequency of the external periodic driving force. We have also observed that the extent of the rectification varies non-monotonically with increasing molecular weight and the strength of geometric asymmetry of the channel. Observed non-monotonicity of the rectification performance has been interpreted in terms of a competition between two effects arising from the channel asymmetry and change in conformational entropy. An analytical model is presented with predictions consistent with the simulation results.