Modulation of partition and localization of perfume molecules in sodium dodecyl sulfate micelles

Host-guest system of a phosphorylated macrocycle assisting structure determination of oily molecules in single-crystal form

X-ray crystallography is the most reliable method for structure elucidation and absolute configuration determination of organic molecules based on their single-crystal forms. However, many analytes are hard to crystallize because of their low melting points (an oily state at room temperature) or conformational flexibility. Here, we report the crystallization of a macrocycle, CTX[P(O)Ph] (host), which is a cyclotrixylohydroquinoylene (CTX) derivative, with 26 oily organic molecules (guests), which is applied for the structural determination of the guest with X-ray crystallography. With the aid of the host, CTX[P(O)Ph], the guest molecules were well-ordered with full occupancy in crystal structures. In most cases, at least one guest structure without any disorder could be observed; solvent masking was not necessary for the single crystal X-ray structural analysis, and thus the structures of the guests could be successfully determined, and the absolute configuration could be assigned reliably for chiral guests with this method. The crystallization mechanism was further discussed from theoretical and experimental perspectives, suggesting that the negative electrostatic potential surface of CTX[P(O)Ph] and noncovalent interactions between the host and guest were crucial for the ordered arrangements of the guest.

Structural alterations of branched versus linear mixed-surfactant micellar systems with the addition of a complex perfume mixture and dipropylene glycol as cosolvent

Personal care products commonly contain perfume mixtures, consisting of numerous perfume raw materials (PRMs), and cosolvents. The lipophilicity and structure of an individual PRM is known to affect its localization within the surfactant self-assembly as well as the micellar geometry. However, because multiple PRMs are used in formulations, significant intermolecular interactions between the PRMs and between the PRMs and the surfactant tail may also influence the location of the PRMs and their effects on the self-assembly. Herein, two anionic/zwitterionic mixed-surfactant systems (sodium trideceth-2 sulfate (ST2S)/cocamidopropyl betaine (CAPB) and sodium laureth-3 sulfate/CAPB) were formulated with a cosolvent (dipropylene glycol (DPG)) and 12 PRMs of varying structures and lipophilicities. This 12 PRM accord is simpler than a fully formulated perfume but more complex than a single perfume molecule. The geometric variations in the self-assemblies were evaluated using small-angle neutron scattering, perfume head space concentrations were determined using gas chromatography-mass spectrometry, and perfume localization was identified using NMR spectroscopy. The addition of the perfume accord caused enlargement of the micelles in both surfactant systems, with a greater change observed for ST2S/CAPB formulations. Furthermore, the addition of DPG to ST2S/CAPB resulted in micelle shrinkage. The micelle geometries and PRM localization in the micelles were affected by the degree of branching in the surfactant tail.

Personal care products commonly contain perfume mixtures, consisting of numerous perfume raw materials (PRMs), and cosolvents. Depending on the molecular structures of the additives and surfactants, the geometry of the colloidal structures can be affected.

Effects of a Multicomponent Perfume Accord and Dilution on the Formation of ST2S/CAPB Mixed-Surfactant Microemulsions

Perfume mixtures contain perfume raw materials (PRMs) with varying structures and hydrophobicities, which influence PRM localization within a surfactant-based formulation and thereby affect the phase behavior. In rinse-off products, the addition of water can further affect the phase behavior. In this study, a mixture of 12 PRMs was used as the oil phase in an aqueous system consisting of sodium trideceth-2 sulfate as a primary surfactant, cocamidopropyl betaine as a cosurfactant, and dipropylene glycol as a cosolvent. A series of phase diagrams were constructed with increasing water content, simulating the use conditions for rinse-off products, to determine how the phase boundaries shift with dilution. Using these phase diagrams, the compositions of interest in the micelle without perfume, micelle with perfume, microemulsion, and micelle-microemulsion transition regions were identified at each dilution level. The structural changes were probed through combined small-angle neutron scattering (SANS) and cryo-transmission electron microscopy analyses. The SANS results showed that ellipsoidal micelles were maintained as the perfume content and the dilution level increased. With ≥50 wt % water, increasing the perfume content increased the micelle volume. Interestingly, a higher rate of volume increase was observed at ≥70 wt % water. Notably, the volumes of the micelles with and without perfume increased steadily with dilution, whereas the volumes of the assemblies in the transition region and the microemulsion region increased more rapidly once diluted to 70 and 80 wt % water, respectively.

Screening of Acetyl Donors and the Robust Enzymatic Synthesis of Acetyl-CoA by 10-Deacetylbaccatin III-10-β-O-acetyltransferase

Acetyl-CoA is the precursor of many bio-manufacturing products and is also the hub of the cellular metabolism of energy and substances. However, acetyl-CoA is not a bulk commodity and its application is hindered due to its high cost and low yield. In this study, we screened acetyl donor candidates and utilized 10-deacetylbaccatin III-10-β-O-acetyltransferase (DBAT) in the synthesis of acetyl-CoA with CoASH as the acetyl acceptor. Among the tested candidates, acetylsalicylic acid methyl ester was identified to be the best acetyl donor, followed by acetyl-trans-resveratrol, acetylsalicylic acid ethyl ester, acetylsalicylsalicylic acid, and 4-acetoxyacetanilide. The enzymatic reaction conditions were optimized and the maximum yield of acetyl-CoA reached 14.82 mg/mL, which is the highest yield among all reported approaches to date. Meanwhile, 4.22 mg/mL of the by-product salicylic acid methyl ester, which is another industrial material, was produced. Additionally, a preliminary purification process for acetyl-CoA was established, in which 40 mg acetyl-CoA (HPLC purity > 98%) was acquired from the finished 20 mL reaction system (feeding 46 mg CoASH and 34 mg ASME) with a recovery rate of 86%. Our study lays the foundation for the large-scale production of acetyl-CoA by an enzymatic approach and will promote its application in different fields.

Contrast Variation Small-Angle Neutron Scattering Study of Solubilization of Perfumes in Cationic Surfactant Micelles

Perfume solubilization is an important process in the production of commercial products such as beverages, foods, and cosmetics. In the present study, small-angle neutron scattering (SANS) experiments were performed to investigate the solubilization behavior of perfumes in cetyltrimethylammonium bromide (CTAB) micelles. The solubilization of linalool (LL) and l-menthol (MT), which are relatively hydrophilic perfumes, did not change the size of the CTAB micelles although the perfumes were incorporated in the micelles, as indicated by a decrease in scattering length density. On the other hand, the solubilization of d-limonene (LN), a hydrophobic perfume, led to the swelling of CTAB micelles. An internal contrast variation SANS study was performed by the deuteration of CTAB molecules to directly observe the perfumes in the micelles. The radius of d-CTAB micelles solubilizing LL or MT corresponds to that of h-CTAB, which indicates that these perfumes are accommodated in the palisade layers of the micelles and are homogeneously distributed in the micelles. On the other hand, LN formed small droplets, as indicated by the SANS profile, which implies the solubilization of LN molecules in the core of the CTAB micelles. We found that the relatively hydrophilic perfumes (LL and MT) show less impact on the sizes of the cationic micelles in comparison to nonionic micelles. Thus, the internal contrast variation method of SANS allowed the direct observation of the solubilization sites of perfumes with different hydrophilicity-hydrophobicity balances. This method is a powerful tool to determine the solubilization states that affect the solubilization capacity, volatilization, or release speed of perfumes.

Investigating the effect of a simplified perfume accord and dilution on the formation of mixed-surfactant microemulsions

The phase analysis of a mixed surfactant system is much more complex than that for a single surfactant system. The addition of fragrance further enhances the complexity of such colloidal systems. The wide variation in structure and log P values of perfume raw materials influence its partitioning into the micellar phase. Herein, we have created a simplified perfume accord consisting of three perfume raw materials (3-PRM) and investigated its loading within a mixed-surfactant system consisting of sodium trideceth-2 sulfate/ST2S and cocamidopropyl betaine/CAPB, along with citric acid and dipropylene glycol. We performed a systematic phase diagram analysis and identified the isotropic phases and compositions of interest. Select compositions from the phase diagram were further investigated to learn how the geometry of the surfactant self-assembly and the localization of the PRMs within the surfactant self-assembly changed when water or perfume is added. A combined small-angle neutron scattering/SANS and NMR methodology was used to identify variation in colloidal domains and positioning of perfume molecules at varying dilutions/rinse off scenarios. The results obtained were utilized to better distinguish distorted micelles from true microemulsions. The systematic investigation here provides a fundamental understanding about the self-assembly, encapsulation and perfume release from a commercially relevant mixed surfactant system.

Structural changes and phase analyses of a three-PRM accord in sodiumtrideceth-2 sulfate and cocamidopropyl betaine, citric acid and diproplylene glycol surfactant system as a function of dilution.

Partitioning of Selected Anisole and Veratrole Derivatives between Water and Anionic Surfactant Micelles

The UV absorption spectra of six structurally related derivatives of anisole and veratrole, i.e., anisaldehyde, (E)-anethole, estragole, veratraldehyde, methyleugenol and (E)-methylisoeugenol, were recorded at various concentrations of the anionic surfactants, either sodium lauryl sulfate (SLS) or sodium lauryl ether sulfate (SLES) at T = 298 K. In addition, conductivity and density measurements were made for the SLS and SLES solutions to determine the volumetric properties of the studied surfactants. Next, using the W. Al-Soufi, L. Pińeiro and M. Novo model (APN model) including the pseudo-phase model for micellar solubilization, the values of micelle-water partition coefficients for each perfume-surfactant system were determined. In addition, the relations between the molecular structures of the solute and the head group of the surfactant and the value of the micelle-water partition coefficient as well as the octanol-water one were discussed.

Tuning the Encapsulation of Simple Fragrances with an Amphiphilic Graft Copolymer

The encapsulation of poorly water-soluble compounds such as perfumes, flavors, and bioactive molecules is a key step in the formulation of a large variety of consumer products in the fields of household care and personal care. We study the encapsulation ability of an amphiphilic poly(ethylene glycol)-graft-poly(vinyl acetate) (PEG-g-PVAc) graft copolymer, extending the focus to the entire phase diagram of polymer/perfume/water systems with three common natural fragrances. The three perfume molecules (2-phenyl ethanol, L-carvone, and α-pinene) possess different water affinities, as expressed by their octanol/water partition coefficients. The investigation of the polymorphism of PEG-g-PVAc in these systems is carried out by means of dynamic light scattering, small-angle X-ray scattering, NMR spectroscopy, and confocal laser scanning microscopy. The results presented here demonstrate that the choice of fragrance can dramatically affect the supramolecular structures formed by the polymer in aqueous solution, with important consequences on formulations of industrial interest such as the demixing of complex perfume blends when one or more of the components have no chemical affinity for any of the polymer blocks.

Structural Characterization of Pluronic Micelles Swollen with Perfume Molecules

The insertion in nonionic polymer micelles (Pluronics F127) of seven essential oils and some of the pure compounds that compose them was investigated by complementary differential scanning calorimetry, small-angle X-ray, and neutron scattering (SAXS and SANS). The study revealed various insertion and swelling behaviors for the different oil molecules, an evidence of different interaction mechanisms involved between oils and Pluronic monomers. Thermodynamically, the addition of oil increased the micellization enthalpy due to an enhanced release of water molecules, leading subsequently to a decrease of the critical micellar temperature (CMT). Structurally, with oil, SANS revealed the presence of large aggregates at lower temperature than the CMT for which their size is maximal. Above the CMT, the size decreased and the equilibrium was reached a few degrees after the temperature corresponding to the maximum of the endothermic peak. At 37 °C, the detailed combined SANS and SAXS analysis demonstrated a partial phase separation between the oil and the poly(propylene oxide) core. The hydrophilic stabilizing poly(ethylene oxide) shell remains unchanged.

Achieving foaming control smartly: pre-solubilized flavor oil serves as an in situ homogeneous defoamer

In the wide application of aqueous foam, creating abundant foam and processing appropriate foaming control are both essential, depending upon the actual situation; the latter process is not only harder to achieve, but also more complicated to comprehensively understand on the molecular level. In this paper, a type of natural flavor oil, carvone, was solubilized in a micelle solution of sodium dodecyl sulfate (SDS) to study the effect on the foaming properties. The foamability and foam stability of the swollen micelle solutions were experimentally characterized, and the molecular behavior of the surfactant and oil molecules before, during and after the foaming process were investigated. It was found that the solubilized carvone co-adsorbed with SDS at the gas/water interface and caused a prominent effect on the foam film stability in several approaches, thereby making the flavor oil a possible foam controller that would not inhibit foam formation, but could eliminate foam efficiently once foam was undesired. Interestingly, it was found that the release of flavor in the foaming process was promoted. Detailed discussion of the interfacial behavior of carvone and the effect on the foaming properties of surfactants in different stages of foam may provide a theoretical foundation for exploring green and smart approaches in achieving foaming control.

Evaluation of a mixed anionic-nonionic surfactant modified eggshell membrane as an advantageous adsorbent for the solid-phase extraction of Sudan I-IV as model analytes

The coadsorption of mixed anionic-nonionic surfactants, sodium dodecylbenzenesulfonate with Triton X-100, on the surface of eggshell membrane was investigated based on adsorption isotherms to improve the solid-phase extraction performance of eggshell membrane toward organic contaminants. Results showed that even though excess Triton X-100 might inhibit the adsorption of sodium dodecylbenzenesulfonate, a low dosage of Triton X-100 can significantly improve sodium dodecylbenzenesulfonate modification and enhance the extraction efficiency of eggshell membrane from 73.7 to 100.4% because of the formation of mixed hemimicelles. The highest recovery was achieved at 2:8 (Triton X-100/sodium dodecylbenzenesulfonate mass ratios), and multiple mechanisms involving π-π interactions, hydrophobic effect, and π-π electron donor-acceptor interactions contributed to the strong extraction affinity. When mixed, the Triton X-100 and sodium dodecylbenzenesulfonate modified eggshell membrane packed cartridge coupled with high-performance liquid chromatography was applied for the simultaneous determination of trace Sudan I-IV, and low detection limits (0.16-0.26 ng/L) were achieved with satisfactory linearity (R²  > 0.999) in 10-10 000 μg/L. For real samples, Sudan II and III in one chilli sauce sample were found at 4.3 and 1.7 μg/kg. Sudan I-IV recoveries at three spiked levels were 87.4-102.9% with precisions <6.8%. Comparison with commonly used solid-phase extraction adsorbents and methods further reflected the superiorities of the proposed adsorbent in sensitivity, retention ability, and applicability.