Resorbable Membranes for Guided Bone Regeneration: Critical Features, Potentials, and Limitations

Lack of horizontal and vertical bone at the site of an implant can lead to significant clinical problems that need to be addressed before implant treatment can take place. Guided bone regeneration (GBR) is a commonly used surgical procedure that employs a barrier membrane to encourage the growth of new bone tissue in areas where bone has been lost due to injury or disease. It is a promising approach to achieve desired repair in bone tissue and is widely accepted and used in approximately 40% of patients with bone defects. In this Review, we provide a comprehensive examination of recent advances in resorbable membranes for GBR including natural materials such as chitosan, collagen, silk fibroin, along with synthetic materials such as polyglycolic acid (PGA), polycaprolactone (PCL), polyethylene glycol (PEG), and their copolymers. In addition, the properties of these materials including foreign body reaction, mechanical stability, antibacterial property, and growth factor delivery performance will be compared and discussed. Finally, future directions for resorbable membrane development and potential clinical applications will be highlighted.

Looking into a crystal ball: printing and patterning self-assembled peptide nanostructures

The solution processability of organic semiconductors and conjugated polymers along with the advent of nanomaterials as conducting inks have revolutionized next-generation flexible consumer electronics. Another equally important class of nanomaterials, self-assembled peptides, heralded as next-generation materials for bioelectronics, have a lot of potential in printed technology. In this minireview, we address the self-assembly process in dipeptides, their application in electronics, and recent progress in three-dimensional printing. The prospect of a generalizable path for nanopatterning self-assembled peptides using ice lithography and its challenges are further discussed.

Structural Transition-Induced Raman Enhancement in Bioinspired Diphenylalanine Peptide Nanotubes

Semiconducting materials are increasingly proposed as alternatives to noble metal nanomaterials to enhance Raman scattering. We demonstrate that bioinspired semiconducting diphenylalanine peptide nanotubes annealed through a reported structural transition can support Raman detection of 10-7 M concentrations for a range of molecules including mononucleotides. The enhancement is attributed to the introduction of electronic states below the conduction band that facilitate charge transfer to the analyte molecule. These results show that organic semiconductor-based materials can serve as platforms for enhanced Raman scattering for chemical sensing. As the sensor is metal-free, the enhancement is achieved without the introduction of electromagnetic surface-enhanced Raman spectroscopy.

Cell Penetrating Peptide-Based Self-Assembly for PD-L1 Targeted Tumor Regression

Cell penetrating peptides (CPPs) are peptides that can directly adapt to cell membranes and then permeate into cells. CPPs are usually covalently linked to the surface of nanocarriers to endow their permeability to the whole system. However, hybrids with lipids or polymers make the metabolism much more sophisticated and even more difficult to determine. In this study, we present a continuous sequence of 18 amino acids (FFAARTMIWY(d-P)GAWYKRI). It forms nanospheres around 170 nm, which increase slightly after loading with siRNA and DOX. Notably, it can be internalized by cancer cells mainly through electronic interactions and PD-L1-mediated endocytosis. Compared with poly-l-lysine and polyethyleneimine, it has a much higher efficiency (about four times) of gene transduction while lowering toxicity. In the treatment of cancer, it causes apoptosis (21%) and inhibits the expression of SURVIVIN protein in vitro. In vivo, it shows good biocompatibility as there are no changes in mice’s body weight. When administering peptide-siRNA-DOX, tumor growth is inhibited the most (about three times). These results above prove the sequence to be a good candidate for gene therapy and drug delivery.

Semi-Interpenetrated Hydrogels-Microfibers Electroactive Assemblies for Release and Real-Time Monitoring of Drugs

Simultaneous drug release and monitoring using a single polymeric platform represents a significant advance in the utilization of biomaterials for therapeutic use. Tracking drug release by real-time electrochemical detection using the same platform is a simple way to guide the dosage of the drug, improve the desired therapeutic effect, and reduce the adverse side effects. The platform developed in this work takes advantage of the flexibility and loading capacity of hydrogels, the mechanical strength of microfibers, and the capacity of conducting polymers to detect the redox properties of drugs. The engineered platform is prepared by assembling two spin-coated layers of poly-γ-glutamic acid hydrogel, loaded with poly(3,4-ethylenedioxythiophene) (PEDOT) microparticles, and separated by a electrospun layer of poly-ε-caprolactone microfibers. Loaded PEDOT microparticles are used as reaction nuclei for the polymerization of poly(hydroxymethyl-3,4-ethylenedioxythiophene) (PHMeDOT), that semi-interpenetrate the whole three layered system while forming a dense network of electrical conduction paths. After demonstrating its properties, the platform is loaded with levofloxacin and its release monitored externally by UV-vis spectroscopy and in situ by using the PHMeDOT network. In situ real-time electrochemical monitoring of the drug release from the engineered platform holds great promise for the development of multi-functional devices for advanced biomedical applications.

The Role of Amylogenic Fiber Aggregation on the Elasticity of a Lipid Membrane

This work presents a systematic study of the swelling behavior of a lecithin lamellar phase incorporating different amounts of the short peptide sequence diphenylalanine (FF). Small- and wide-angle X-ray scattering assays provide relevant information about the structure and elasticity of the lamellar stacking. These data show that important changes occur at the interface of the lipid membrane dependent not only on the peptide content but also on the hydration of the lamellar structure. Multilamellar-to-unilamellar transitions, previously observed for an increasing number of peptides, are now observed to be dependent on the hydration of the lamellar phase. Wide-angle X-ray scattering and electron microscopy observations (TEM) provide experimental evidence of peptide aggregation into long amylogenic fibers. We argue that aggregates that partition in water may become large enough to destabilize the lamellar structure. It is also shown that, for a given peptide concentration, the lamellar structure can be rendered more flexible or more rigid, by tuning the hydration.

Self-assembly of dipeptide Boc-diphenylalanine nanotubes inside electrospun polymeric fibers with strong piezoelectric response

Dipeptide biomaterials are strong piezoelectric materials that can convert applied mechanical forces into electricity. We have developed large-scale hybrid electrospun arrays containing N-tert-butoxycarbonyl (Boc) diphenylalanine in the form of nanotubes embedded in biocompatible polymers. These nanofibers exhibit strong piezoelectric properties when a periodic mechanical force is applied. The nanostructured hybrid materials were produced by the electrospinning technique. Optical absorption measurements show four bands in the spectral region 240-280 nm indicating quantum confinement due to nanotube formation of Boc-diphenylalanine in dichloromethane solutions. A strong blue photoluminescence emission was observed from nanotubes crystallized inside the fiber arrays during the electrospinning process. These two dimensional hybrid biomaterial structures are able to generate voltage, current and density power of up to 30 V, 300 nA and 2.3 μW cm^-2, respectively, when a periodical force of 1.5 N is applied. The dipeptide-polymer electrospun arrays can power several liquid-crystal display panels and may be used for biomedical applications and as bio-energy sources.

Peptide-Based Drug-Delivery Systems in Biotechnological Applications: Recent Advances and Perspectives

Peptides of natural and synthetic sources are compounds operating in a wide range of biological interactions. They play a key role in biotechnological applications as both therapeutic and diagnostic tools. They are easily synthesized thanks to solid-phase peptide devices where the amino acid sequence can be exactly selected at molecular levels, by tuning the basic units. Recently, peptides achieved resounding success in drug delivery and in nanomedicine smart applications. These applications are the most significant challenge of recent decades: they can selectively deliver drugs to only pathological tissues whilst saving the other districts of the body. This specific feature allows a reduction in the drug side effects and increases the drug efficacy. In this context, peptide-based aggregates present many advantages, including biocompatibility, high drug loading capacities, chemical diversity, specific targeting, and stimuli responsive drug delivery. A dual behavior is observed: on the one hand they can fulfill a structural and bioactive role. In this review, we focus on the design and the characterization of drug delivery systems using peptide-based carriers; moreover, we will also highlight the peptide ability to self-assemble and to actively address nanosystems toward specific targets.

SERS active self-assembled diphenylalanine micro/nanostructures: A combined experimental and theoretical investigation

Enhancing Raman signatures of molecules by self-assembled metal nanoparticles, nanolithography patterning, or by designing plasmonic nanostructures is widely used for detection of low abundance biological systems. Self-assembled peptide nanostructures provide a natural template for tethering Au and Ag nanoparticles due to its fractal surface. Here, we show the use of L,L-diphenylalanine micro-nanostructures (FF-MNSs) for the organization of Ag and Au nanoparticles (Nps) and its potential as surface-enhanced Raman scattering (SERS)-active substrates. The FF-MNSs undergo an irreversible phase transition from hexagonally packed (hex) micro-nanotubes to an orthorhombic (ort) structure at ∼150 °C. The metal Nps form chains on hex FF-MNSs as inferred from transmission electron microscopy images and a uniform non-aggregated distribution in the ort phase. The high luminescence from the ort FF-MNS phase precludes SERS measurements with AgNps. The calculated Raman spectra using density-functional theory shows a higher intensity from rhodamine 6G (R6G) molecule in the presence of an Ag atom bound to ort FF compared with hex FF. The SERS spectra obtained from R6G bound to FF-MNSs with AuNps clearly show a higher enhancement for the ort phase compared with hex FF, corroborating our theoretical calculations. Our results indicate that FF-MNSs both in the hex and ort phases can be used as substrates for the SERS analysis with different metal nanoparticles, opening up a novel class of optically active bio-based substrates.

Structural Characterization of PEGylated Hexaphenylalanine Nanostructures Exhibiting Green Photoluminescence Emission

Peptides containing aromatic residues are known to exhibit spontaneous phenomena of supramolecular organization into ordered nanostructures (NSs). In this work we studied the structural behavior and optoelectronic properties of new biocompatible materials obtained by the self-assembly of a series of hexaphenylalanines (F6) modified at the N terminus by a PEG chain of different lengths. PEG₁₂ -F6, PEG₁₈ -F6, and PEG₂₄ -F6 peptides were synthesized by coupling sequentially two, three, or four units of amino-carboxy-PEG₆ blocks, each one containing six oxyethylene repetitions. Changes in the length and composition of the PEG chain were found to modulate the structural organization of the phenylalanine-based nanostructures. An increase in the self-aggregation tendency was observed with longer PEG chains, whereas, independently of the PEG length, the peptide NSs display cross-β-like secondary structures with an antiparallel β-strand arrangement. WAXS/GIWAXS diffraction patterns indicate a progressive decrease in fiber order along the series. All the PEG-F6 derivatives present blue photoluminescent (PL) emission at 460 nm, with the adduct with the longest PEG chain (PEG₂₄ -F6) showing an additional green emission at 530 nm.

Silicon-rich nitride waveguides for ultra-broadband nonlinear signal processing

Silicon nitride (SixNy) waveguides constitute a technology platform to realize optical signal processing based on the nonlinear Kerr effect. Varying the stoichiometry of the core (i.e., x and y in silicon nitride) provides an additional degree of freedom for engineering the waveguide properties, such as nonlinear Kerr parameter and dispersion. We demonstrate low-stress high-confinement silicon-rich nitride waveguides with flat and anomalous dispersion over the entire C and L optical wavelength transmission bands for optical signal processing based on cross-phase modulation. The waveguides do not show any nonlinear loss for a measured optical input intensity of up to 1.5 × 10⁹ W/cm². In particular, we achieve wavelength conversion of 10 Gb/s signals across the C band; XPM broadening is also observed in the O band. In addition, we highlight the use of SixNy waveguides for nonlinear microwave photonics. Specifically, we demonstrate radio-frequency spectral monitoring of optical signals with a bandwidth of hundreds of gigahertz.

Probing nonlinear optical coefficients in self-assembled peptide nanotubes

Second harmonic generation polarimetry from individual self-assembled peptide nanotubes is used to obtain the ratio of the nonlinear coefficients.

A structurally self-assembled peptide nano-architecture by one-step electrospinning

Peptide self-assembly during electrospinning while the solvent is evaporating and the fibres are forming.