Rapid UV Photo-Cross-Linking of α-Lactalbumin Hydrogel Biomaterial To Enable Wound Healing

Although both the function and biocompatibility of protein-based biomaterials are better than those of synthetic materials, their usage as medical material is currently limited by their high costs, low yield, and low batch-to-batch reproducibility. In this article, we show how α-lactalbumin (α-LA), rich in tryptophan, was used to produce a novel type of naturally occurring, protein-based biomaterial suitable for wound dressing. To create a photo-cross-linkable polymer, α-LA was methacrylated at a 100-g batch scale with >95% conversion and 90% yield. α-LAMA was further processed using photo-cross-linking-based advanced processing techniques such as microfluidics and 3D printing to create injectable hydrogels, monodispersed microspheres, and patterned scaffolds. The obtained α-LAMA hydrogels show promising biocompatibility and degradability during in vivo testing. Additionally, the α-LAMA hydrogel can accelerate post-traumatic wound healing and promote new tissue regeneration. In conclusion, cheap and safe α-LAMA-based biomaterials could be produced, and they have a beneficial effect on wound healing. As a result, there may arise a potential partnership between the dairy industry and the development of pharmaceuticals.

Synthesis of Magneto-Controllable Polymer Nanocarrier Based on Poly(N-isopropylacrylamide-co-acrylic Acid) for Doxorubicin Immobilization

In this work, the preparation procedure and properties of anionic magnetic microgels loaded with antitumor drug doxorubicin are described. The functional microgels were produced via the in situ formation of iron nanoparticles in an aqueous dispersion of polymer microgels based on poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAM-PAA). The composition and morphology of the resulting composite microgels were studied by means of X-ray diffraction, Mössbauer spectroscopy, IR spectroscopy, scanning electron microscopy, atomic-force microscopy, laser microelectrophoresis, and static and dynamic light scattering. The forming nanoparticles were found to be β-FeO(OH). In physiological pH and ionic strength, the obtained composite microgels were shown to possess high colloid stability. The average size of the composites was 200 nm, while the zeta-potential was -27.5 mV. An optical tweezers study has demonstrated the possibility of manipulation with microgel using external magnetic fields. Loading of the composite microgel with doxorubicin did not lead to any change in particle size and colloidal stability. Magnetic-driven interaction of the drug-loaded microgel with model cell membranes was demonstrated by fluorescence microscopy. The described magnetic microgels demonstrate the potential for the controlled delivery of biologically active substances.

Scalable Milk-Derived Whey Protein Hydrogel as an Implantable Biomaterial

There are limited naturally derived protein biomaterials for the available medical implants. High cost, low yield, and batch-to-batch inconsistency, as well as intrinsically differing bioactivity in some of the proteins, make them less beneficial as common implant materials compared to their synthetic counterparts. Here, we present a milk-derived whey protein isolate (WPI) as a new kind of natural protein-based biomaterial for medical implants. The WPI was methacrylated at 100 g bench scale, >95% conversion, and 90% yield to generate a photo-cross-linkable material. WPI-MA was further processed into injectable hydrogels, monodispersed microspheres, and patterned scaffolds with photo-cross-linking-based advanced processing methods including microfluidics and 3D printing. In vivo evaluation of the WPI-MA hydrogels showed promising biocompatibility and degradability. Intramyocardial implantation of injectable WPI-MA hydrogels in a model of myocardial infarction attenuated the pathological changes in the left ventricle. Our results indicate a possible therapeutic value of WPI-based biomaterials and give rise to a potential collaboration between the dairy industry and the production of medical therapeutics.

Bottlebrush Amphiphilic Polymer Co-Networks

We report the synthesis of novel poly(ethylene glycol) and poly(dimethyl siloxane) (PEG and PDMS, respectively) bottlebrush amphiphilic polymer co-networks (B-APCNs) with high gel fractions by a grafting-through ring-opening metathesis polymerization. By varying the volume fraction of PEG (ϕPEG), we alter the crystallinity of the networks, achieving complete suppression of PEG crystallinity at ϕPEG=0.35. Furthermore, we show that the crystallinity of these networks can be tuned to alter their moduli. Through dynamic mechanical analysis, we show that the storage and loss moduli of networks with completely suppressed crystallinity (ϕPEG=0.35) behave similarly to a PDMS homopolymer bottlebrush network. These bottlebrush networks represent an unexplored architecture for the field of amphiphilic polymer co-networks.

Bioinspired design of amphiphilic particles with tailored compartments for dual-drug controlled release

Inspired by the phenomenon of water droplets hanging over rose petals, we propose a green interfacial self-assembly strategy to construct amphiphilic particles with controllable compartments for dual-drug encapsulation and controlled release. The method involves fabrication of "sticky" superhydrophobic materials, assembling superhydrophilic hydrogel beads with "sticky" superhydrophobic material into an amphiphilic particle, and amphiphilicity induced self-organization of several small amphiphilic particles into a large-sized amphiphilic multicompartmental particle. With the employment of this approach, amphiphilic particles with tailored sizes, controllable morphology, and tunable numbers of compartments are successfully constructed. The formation process and the underlying principle are further clarified. We finally investigate the potential application of the amphiphilic multicompartmental particles to load both hydrophilic and hydrophobic species in separated domains and release them in a controllable manner without interference. This novel approach may offer a new route to generate amphiphilic materials for the purpose of multidrug combination therapy, multiple-cell encapsulation, and so on.

Synthesis and physicochemical properties of dual-responsive acrylic acid/butyl acrylate cross-linked nanogel systems

HYPOTHESIS

A cross-linked amphiphilic nanogel containing a high mole% of hydrophilic pH-responsive moiety can provide enhanced functionality regarding stimuli-responsiveness, water-dispersibility, hydrophobic substance loading, and structural stability under harsh environmental conditions. These nanogels could be synthesized using a one-pot procedure for large-scale applications. Moreover, the interplay of various interaction forces in these colloidal systems is being investigated.

EXPERIMENTS

Model nanogels consisting of acrylic acid-butyl acrylate-ethylene glycoldimethacrylate were synthesized using an emulsion copolymerization via a seeded semi-batch process under an acidic condition. The structures were assessed by Fourier transform infrared spectroscopy and potentiometric-conductometric titrations. Zeta potential, field-emission scanning electron microscopy, and transmission electron microscopy were used to evaluate the dispersion stability, size distribution, and structural distribution, respectively. Their stimuli-responsive behavior was studied by combining static and dynamic light scattering and titration analyses.

FINDINGS

Monodisperse nanospheres of approximately 150 nm were successfully prepared by implementing a one-pot practical pathway. These nanogels displayed a dual thermo- and pH-responsive behavior, reflecting the high efficiency of physical cross-linking make it ideal for drug delivery and oil industry applications. Moreover, a novel symmetric pH-activated morphology transformation behavior was revealed. Accordingly, a compositional distribution was proposed and assessed by exploring the polymerization process.

Microfluidic fabrication of microparticles for biomedical applications

Droplet microfluidics offers exquisite control over the flows of multiple fluids in microscale, enabling fabrication of advanced microparticles with precisely tunable structures and compositions in a high throughput manner. The combination of these remarkable features with proper materials and fabrication methods has enabled high efficiency, direct encapsulation of actives in microparticles whose features and functionalities can be well controlled. These microparticles have great potential in a wide range of bio-related applications including drug delivery, cell-laden matrices, biosensors and even as artificial cells. In this review, we briefly summarize the materials, fabrication methods, and microparticle structures produced with droplet microfluidics. We also provide a comprehensive overview of their recent uses in biomedical applications. Finally, we discuss the existing challenges and perspectives to promote the future development of these engineered microparticles.

A versatile synthetic platform for amphiphilic nanogels with tunable hydrophobicity

Functionalization of reactive precursor particles allows the preparation of amphiphilic nanogel libraries with tunable network hydrophobicity and comparable colloidal features.

Ultrasonic-assisted synthesis of sodium lignosulfonate-grafted poly(acrylic acid-co-poly(vinyl pyrrolidone)) hydrogel for drug delivery

Ultrasonic-assisted synthesis of sodium lignosulfonate-grafted hydrogel and the sustained release performance of the drug.