Updates on Responsive Drug Delivery Based on Liposome Vehicles for Cancer Treatment

Liposomes are well-known nanoparticles with a non-toxic nature and the ability to incorporate both hydrophilic and hydrophobic drugs simultaneously. As modern drug delivery formulations are produced by emerging technologies, numerous advantages of liposomal drug delivery systems over conventional liposomes or free drug treatment of cancer have been reported. Recently, liposome nanocarriers have exhibited high drug loading capacity, drug protection, improved bioavailability, enhanced intercellular delivery, and better therapeutic effect because of resounding success in targeting delivery. The site targeting of smart responsive liposomes, achieved through changes in their physicochemical and morphological properties, allows for the controlled release of active compounds under certain endogenous or exogenous stimuli. In that way, the multifunctional and stimuli-responsive nanocarriers for the drug delivery of cancer therapeutics enhance the efficacy of treatment prevention and fighting over metastases, while limiting the systemic side effects on healthy tissues and organs. Since liposomes constitute promising nanocarriers for site-targeted and controlled anticancer drug release, this review focuses on the recent progress of smart liposome achievements for anticancer drug delivery applications.

Fabrication, modification and application of lipid nanotubes

The potential application of high aspect-ratio nanomaterials motivates the development of the fabrication and modification of lipid nanotubes(LNTs). To date, diverse fabricate processes and elaborate template procedures have produced suitable tubular architectures with definite dimensions and complex structures for expected functions and applications. Herein, we comprehensively summarize the fabrication of LNTs in vitro and discuss the progress made on the micro/nanomaterials fabrication using LNTs as a template, as well as the functions and possible application of a wide range of LNTs as fundamental or derivative material. In addition, the characteristics, advantages, and disadvantages of different fabrication, modification methods, and development prospects of LNTs were briefly summarized.

Mimicking Cellular Metabolism in Artificial Cells: Universal Molecule Transport across the Membrane through Vesicle Fusion

Mass transport across cell membranes is a primary process for cellular metabolism. For this purpose, electrostatically mediated membrane fusion is exploited to transport various small molecules including glucose-6-phosphate, isopropyl β-D-thiogalactoside, and macromolecules such as DNA plasmids from negatively charged large unilamellar vesicles (LUVs) to positively charged giant unilamellar vesicles (GUVs). After membrane fusion between these oppositely charged vesicles, molecules are transported into GUVs to trigger the NAD⁺ involved enzyme reaction, bacterial gene expression, and in vitro gene expression of green fluorescent protein from a DNA plasmid. The optimized charged lipid percentages are 10% for both positively charged GUVs and negatively charged LUVs to ensure the fusion process. The experimental results demonstrate a universal way for mass transport into the artificial cells through vesicle fusions, which paves a crucial step for the investigation of complicated cellular metabolism.

Encapsulation of volatile compounds in liquid media: Fragrances, flavors, and essential oils in commercial formulations

The first marketed example of the application of microcapsules dates back to 1957. Since then, microencapsulation techniques and knowledge have progressed in a plethora of technological fields, and efforts have been directed toward the design of progressively more efficient carriers. The protection of payloads from the exposure to unfavorable environments indeed grants enhanced efficacy, safety, and stability of encapsulated species while allowing for a fine tuning of their release profile and longer lasting beneficial effects. Perfumes or, more generally, active-loaded microcapsules are nowadays present in a very large number of consumer products. Commercial products currently make use of rigid, stable polymer-based microcapsules with excellent release properties. However, this type of microcapsules does not meet certain sustainability requirements such as biocompatibility and biodegradability: the leaking via wastewater contributes to the alarming phenomenon of microplastic pollution with about 4% of total microplastic in the environment. Therefore, there is a need to address new issues which have been emerging in relation to the poor environmental profile of such materials. The progresses in some of the main application fields of microencapsulation, such as household care, toiletries, cosmetics, food, and pesticides are reviewed herein. The main technologies employed in microcapsules production and the mechanisms underlying the release of actives are also discussed. Both the advantages and disadvantages of every technique have been considered to allow a careful choice of the most suitable technique for a specific target application and prepare the ground for novel ideas and approaches for encapsulation strategies that we expect to be proposed within the next years.

Drug release and magneto-calorific analysis of magnetic lipid microcapsules for potential cancer therapeutics

Magnetic nanoparticles (MNPs) with safety, stability and excellent magneto-calorific effect are the precondition for the smart magnetic drug carriers' fabrication and controllable drug release at a specific target in clinical treatment. In this study, the drug release and magneto-calorific effect of two types of magnetic lipid microcapsules (MLMs) loading lipid-coated MNPs and uncoated MNPs respectively were compared deeply in experimental analysis and theoretical simulation. The simulation results revealed that almost same magnetic heat effect and temperature increasing exist between lipid-coated and uncoated MNPs, which was consistent with the experimental drug release results. Coating lipid on MNPs didn't affect the magnetic heat and heat transfer of the MNPs. Because of the heat transfer between MNPs and water, MLMs and water around, the temperature increasing of whole sample solution is lower than that of the MNPs themselves. Our results provide a reliable theoretical basis for the development of healthy, safe, and biocompatible drug delivery systems.

Emerging Biomedical Applications Based on the Response of Magnetic Nanoparticles to Time-Varying Magnetic Fields

Magnetic nanoparticles are of interest for biomedical applications because of their biocompatibility, tunable surface chemistry, and actuation using applied magnetic fields. Magnetic nanoparticles respond to time-varying magnetic fields via physical particle rotation or internal dipole reorientation, which can result in signal generation or conversion of magnetic energy to heat. This dynamic magnetization response enables their use as tracers in magnetic particle imaging (MPI), an emerging biomedical imaging modality in which signal is quantitative of tracer mass and there is no tissue background signal or signal attenuation. Conversion of magnetic energy to heat motivates use in nanoscale thermal cancer therapy, magnetic actuation of drug release, and rapid rewarming of cryopreserved organs. This review introduces basic concepts of magnetic nanoparticle response to time-varying magnetic fields and presents recent advances in the field, with an emphasis on MPI and conversion of magnetic energy to heat.

The pH-Induced Specific Area Changes of Unsaturated Lipids Deposited onto a Bubble Interface

In this work, we used an original experimental setup to examine the behavior of insoluble monolayers made with pH-sensitive lipids. Two kinds of unsaturated lipids were chosen: a cationic one (lipid 1) bearing an ammonium headgroup and an anionic one (lipid 2) terminated with an acidic phenol group. The lipids were deposited onto an air bubble interface maintained in an aqueous phase and, after stabilization, were subjected to a series of compressions performed at different pH values. These experiments disclosed a gradual increase in the specific area per molecule when lipids were neutralized. Imposing a pH variation at constant bubble volume also provided surface pressure profiles that confirmed this molecular behavior. As complementary characterization, dilatational rheology disclosed a phase transition from a purely elastic monophasic system to a viscoelastic two-phase system. We hypothesized that this unexpected increase in the specific area with lipid neutralization is related to the presence of unsaturations in each of the two branches of the hydrophobic tails that induce disorder, thereby increasing the molecular area at the interface. Application of the two-dimensional Volmer equation of state allowed the generation of quantitative values for the specific areas that showed variations with pH. It also allowed the determination of apparent pK_a values, which are affected by both the electrostatic potential within the monolayer and the affinity of the lipid polar head for the aqueous phase.

Hierarchically flower-like WS2 microcrystals for capture and recovery of Au (III), Ag (I) and Pd (II)

In the past few years, two-dimensional (2D) nanomaterials have emerged great potential for the removal of valuable metals and the capture of polluted-heavy metals. Herein, hierarchically flower-like microcrystals with 2D WS₂ nanosheets (F-WS₂ MCs) were prepared by one-pot hydrothermal synthesis strategy and its adsorption performances for precious metals were systematically assessed. The excellent adsorption efficiencies of ∼86.8%, ∼27.6%, and ∼94.1% towards Ag (I), Pd (II), and Au (III) respectively were achieved within 120 min, and the adsorption curves were in good agreement with a pseudo-second-order kinetic model showing a fast uptake rate at the optimum pH values (1.30 for Au (III), 1.43 for Ag (I), and 3.20 for Pd (II)). The adsorption isotherm followed well in the Langmuir model with the maximum removal capacities (q_max) of 186.2 mg g^-1 for Ag (I), 67.29 mg g^-1 for Pd (II), and 1340.6 mg g^-1 for Au (III), respectively. Furthermore, for recycling purposes, the relevant desorption solution was investigated with different ratios of monobasic acid and thiourea, suggesting the best desorption efficiency of 93.03%, 88.08%, and 85.34% for Ag (I), Pd (II), and Au (III), respectively. By characterizing the crystalline phase, and micromorphology element mapping of F-WS₂ MCs before and after adsorption, the strong affinity and significant adsorption-reduction were indicated to dominate the adsorption process. Therefore, this work broadens the application range of WS₂ microcrystals, providing an alternative material for capturing precious metals and wastewater treatment applications.

Ultrasound-responsive polymersomes capable of endosomal escape for efficient cancer therapy

Stimuli-responsive anticancer drug delivery vehicles have attracted increasing attention in nanomedicine. However, controlled drug release in vivo is still an important challenge, as traditional stimuli lack maneuverability. To solve this problem, we designed an ultrasound and pH-responsive polymersome by self-assembly of poly(ethylene oxide)-block-poly(2-(diethylamino)ethyl methacrylate)-stat-poly(methoxyethyl methacrylate) [PEO-b-P(DEA-stat-MEMA)], where PEO acts as the corona-forming block, DEA acts as the endosomal escape segment, and MEMA acts as the ultrasound-responsive segment. This strategy combines the advantages of noninvasive ultrasonic stimulus which can be applied from outside to any organ regardless of depth, and the weakly acidic microenvironment of tumor tissue. In vitro experiments confirmed excellent endosomal escape ability, on-demand drug release behavior, low cytotoxicity, and high intracellular delivery efficiency of polymersomes. In vivo antitumor tests revealed that in the presence of sonication, the anticancer drug was released at an accelerated rate from these ultrasound-responsive polymersomes, and the DOX-loaded polymersomes + sonication group significantly inhibited tumor growth (95% reduction in tumor mass) without any side effects. Overall, this ultrasound-responsive polymersome provides us with a fresh insight into designing next-generation stimuli-responsive drug carriers with better maneuverability and higher chemotherapeutic efficiency.

A pre-formulation strategy for the liposome encapsulation of new thioctic acid conjugates for enhanced chemical stability and use as an efficient drug carrier for MPO-mediated atherosclerotic CVD treatment

Lipoyl-apocynin and lipoyl-sesamol are bio-active conjugates of thioctic acid, synthesized using a benign chemical approachviathe combination of thioctic acid and the powerful bio-phytonutrients, apocynin and sesamol, respectively.

Magnetic liposome design for drug release systems responsive to super-low frequency alternating current magnetic field (AC MF)

HYPOTHESIS

Magnetic liposomes are shown to release the entrapped dye once modulated by low frequency AC MF. The mechanism and effectiveness of MF application should depend on lipid composition, magnetic nanoparticles (MNPs) properties, temperature and field parameters.

EXPERIMENTS

The study was performed using liposomes of various lipid composition and embedded hydrophobic MNPs. The liposomes structural changes were studied by the transmission electron microscopy (TEM) and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and the leakage was monitored by the fluorescent dye release.

FINDINGS

Magnetic liposomes exposure to the AC MF resulted in the clustering of the MNPs in the membranes and disruption of the lipid packaging. Addition of cholesterol diminished the dye release from the saturated lipid-based liposomes. Replacement of the saturated lipid for unsaturated one also decreased the dye release. The dye release depended on the strength, but not the frequency of the field. Thus, the oscillating motion of MNPs in AC MF ruptures the gel phase membranes of saturated lipids. As the temperature increases the disruption also increases. In the liquid crystalline membranes formed by unsaturated lipids the deformations and defects created by mechanical motion of the MNPs are more likely to heal and results in decreased release.

Magnetically Navigated Core-Shell Polymer Capsules as Nanoreactors Loadable at the Oil/Water Interface

Polymer core-shell nanocapsules with magnetic nanoparticles embedded in their oil cores were fabricated and applied as nano(photo)reactors. Superparamagnetic iron oxide nanoparticles (SPIONs) coated with oleic acid were first synthesized and characterized structurally, and their magnetic properties were determined. The capsules with chitosan-based shells were then formed in a one-step process by sonication-assisted mixing of (1) an aqueous solution of the hydrophobically derived chitosan and (2) oleic acid containing the dispersed SPIONs. In this way, magnetic capsules with a diameter of approximately 500-600 nm containing encapsulated SPIONs with an average diameter of approximately 20-30 nm were formed as revealed by dynamic light scattering and scanning transmission electron microscopy measurements. The composition and magnetic properties of the formed capsules were also followed using dynamic light scattering, electron microscopies, and magnetic force microscopy. The water-dispersible capsules, thanks to their magnetic properties, were then navigated in a static magnetic field gradient and transferred between the water and oil phases, as evidenced by fluorescence microscopy. In this way, the capsules could be loaded in a controlled way with a hydrophobic reactant, perylene, which was later photooxidized upon transferring the capsules to the aqueous phase. The capsules were shown to serve as robust reloadable nanoreactors/nanocontainers that via magnetic navigation can be transferred between immiscible phases without disruption. These features make them promising reusable systems not only for loading and carrying lipophilic actives, conducting useful reactions in the confined environment of the capsules, but also for magnetically separating and guiding the encapsulated active molecules to the site of action.

A multifunctional biomimetic hybrid nanocarrier for the controlled delivery of chemotherapy drugs by near-infrared light

We have constructed a biocompatible magnetic nanoparticle-based nanocomposite material by integrating the features of Fe₃O₄ nanoparticles, mesoporous silica and lipid bilayer for the treatment of tumor.

Polymer-Magnetic Composite Fibers for Remote-Controlled Drug Release

An efficient method is reported, for the fabrication of composite microfibers that can be magnetically actuated and are biocompatible, targeting controlled drug release. Aqueous solutions of polyvinyl alcohol, incorporated with citric acid-coated Fe₃O₄ magnetic nanoparticles (MNPs), are subject to infusion gyration to generate 100-300 nm diameter composite fibers, with controllable MNP loading. The fibers are stable in polar solvents, such as ethanol, and do not show any leaching of MNPs for over 4 weeks. Using acetaminophen as an example, we demonstrate that this material is effective in immobilization and triggered release of drugs, which is achieved by a moving external magnetic field. The remote actuation ability, coupled with biocompatibility and lightweight property, renders enormous potential for these fibers to be used as a smart drug release agent.

Magnetically triggered release of amoxicillin from xanthan/Fe3O4/albumin patches

This work was motivated by the need of stimuli responsive drug carriers, which can be activated by low cost non-invasive stimuli such as external magnetic field (EMF). Thus, novel antimicrobial materials based on xanthan gum (XG), magnetic nanoparticles (MNP), bovine serum albumin (BSA) and amoxicillin (Amox) were designed in order to promote the release of Amox under magnetic stimuli. Firstly, surfaces with different functionalities were prepared by sequential deposition of thin layers on Si wafers and characterized by means of ellipsometry and atomic force microscopy. Amox adsorbed preferentially onto XG or BSA films. In solution, favorable interactions between Amox and BSA were evidenced by substantial changes in the BSA secondary structure, as revealed by circular dichroism. Patches of XG and XG/MNP/BSA were immersed in 2 g L^-1 Amox, yielding 10 ± 3 and 17 ± 4 μg/cm³ Amox loading, respectively. The inclusion of 0.2 wt% Fe₃O₄ in the patches and their exposure to EMF enabled in vitro release of Amox, at pH 5.5 and 0.02 mol L^-1 NaCl, following the quasi-Fickian behavior. Amox diffused from XG/MNP/BSA patches in agar medium containing Staphylococcus aureus and Escherichia coli, inhibiting their growth. The inhibition of E. coli growth was particularly efficient under EMF.

Liposome Crosslinked Polyacrylamide/DNA Hydrogel: a Smart Controlled-Release System for Small Molecular Payloads

A novel stimuli-responsive hydrogel system with liposomes serving as both noncovalent crosslinkers and functional small molecules carriers for controlled-release is developed. Liposomes can crosslink polyacrylamide copolymers functionalized with cholesterol-modified DNA motifs to yield a DNA hydrogel system, due to the hydrophobic interaction between cholesteryl groups and the lipid bilayer of liposomes. Functional information encoded DNA motifs on the polymer backbones endow the hydrogel with programmable smart responsive properties. In a model system, the hydrogel exhibits stimuli-responsive gel-to-sol transformation triggered by the opening of DNA motifs upon the presence of a restriction endonuclease enzyme, EcoR I, or temperature change, realizing the controlled-release of liposomes which are highly efficient carriers of active small molecules payloads. Two active molecules, 1,1-dioctadecyl-3,3,3,3-tetramethylindodicarbocyanine perchlorate (DiIC18(5)) and calcein, are chosen as the hydrophobic and hydrophilic model payloads, respectively, to address the feasibility of the releasing strategy. Moreover, the hydrogel exhibits injectable property as well as self-recovery behaviors.

Lipid bilayer modified gold nanorod@mesoporous silica nanoparticles for controlled drug delivery triggered by near-infrared light

We coupled the photothermal and thermoresponsive properties in one nanoplatform by wrapping AuNRs@mSiO₂ with thermoresponsive lipid bilayer.

Recent Advances of Using Hybrid Nanocarriers in Remotely Controlled Therapeutic Delivery

The development of hybrid biomaterials has been attracting great attention in the design of materials for biomedicine. The nanosized level of inorganic and organic or even bioactive components can be combined into a single material by this approach, which has created entirely new advanced compositions with truly unique properties for drug delivery. The recent advances in using hybrid nanovehicles as remotely controlled therapeutic delivery carriers are summarized with respect to different nanostructures, including hybrid host-guest nanoconjugates, micelles, nanogels, core-shell nanoparticles, liposomes, mesoporous silica, and hollow nanoconstructions. In addition, the controlled release of guest molecules from these hybrid nanovehicles in response to various remote stimuli such as alternating magnetic field, near infrared, or ultrasound triggers is further summarized to introduce the different mechanisms of remotely triggered release behavior. Through proper chemical functionalization, the hybrid nanovehicle system can be further endowed with many new properties toward specific biomedical applications.