Intramolecular Folding of PolyT Oligonucleotides Induced by Cooperative Binding of Silver(I) Ions

Ag⁺-bridged T-Ag⁺-T was recently discovered in a Ag⁺-DNA nanowire crystal, but it was reported that Ag⁺ had little to no affinity to T nucleobases and T-rich oligonucleotides in solution. Therefore, the binding mode for the formation of this type of novel metallo base pair in solution is elusive. Herein, we demonstrate that Ag⁺ can interact with polyT oligonucleotides once the concentration of Ag⁺ in solution exceeds a threshold value. The threshold value is independent of the concentration of the polyT oligonucleotide but is inversely proportional to the length of the polyT oligonucleotide. The polyT oligonucleotides are intramolecularly folded due to their positively cooperative formation and the stack of T-Ag⁺-T base pairs, resulting in the 5'- and 3'-ends being in close proximity to each other. The intramolecular Ag⁺-folded polyT oligonucleotide has a higher thermal stability than the duplex and can be reversibly modulated by cysteine.

Aptamer-enhanced the Ag(I) ion-3,3',5,5'-tetramethylbenzdine catalytic system as a novel colorimetric biosensor for ultrasensitive and selective detection of paraquat

A facile and simple colorimetric biosensor was first established for paraquat (PQ) detection based on the aptamer-enhanced oxidation process of 3,3',5,5'-tetramethylbenzidine (TMB) by Ag⁺. The study confirmed that the interaction of PQ-15 aptamer with Ag⁺ accelerates the electron transfer from the aptamer-Ag⁺ complex to dissolved oxygen, which enhances the release of superoxide anion radicals (O₂̇^-) and facilitates the catalytic oxidation of the chromogenic substrate. PQ-15 aptamer will preferentially bind to PQ molecules, resulting in no further enhancement of the catalytic activity of Ag⁺. Molecular docking results revealed that the PQ molecules are attached to the stem-loop region of the PQ-15 aptamer through σ-π conjugation interactions. The proposed method is simple that only contains Ag⁺ and corresponding aptamer. The limit of detection (LOD) of the constructed colorimetric biosensor for PQ detection was determined to be 16.5 μg·L^-1, belowing the maximum residue limit in fruits and vegetables set by the EU. Moreover, the colorimetric biosensor showed excellent selectivity and anti-interference properties, which was validated for detecting PQ residues in several typical agricultural and water samples.

Light responsive nucleic acid for biomedical application

Nucleic acids are widely used in biomedical applications because of their programmability and biocompatibility. The light responsive nucleic acids have attracted wide attention due to their remote control and high spatiotemporal resolution. In this review, we summarized the latest developments in biomedicine of light responsive molecules. The molecules which confer light responsive properties to nucleic acids were summarized. The binding sites of molecules to nucleic acids, the induced structural changes, and functional regulation of nucleic acids were reviewed. Then, the biomedical applications of light responsive nucleic acids were listed, such as drug delivery, biosensing, optogenetics, gene editing, etc. Finally, the challenges were discussed and possible future directions of light-responsive nucleic acids were proposed.

Lead-start isothermal polymerase amplification controlled by DNAzymatic switches

As DNA polymerases are even active at ambient temperature, there is inevitable non-specific amplification; to avoid the undesired amplification of analytes, a heat activation-based polymerase chain reaction (PCR), called hot-start PCR, is widely used to be highly precise and quantitative in detection. Unlike thermocycling amplification, isothermal amplification, compatible for point-of-care (PoC) tests, cannot be benefited by the heat-activation technique, making the method qualitative rather than quantitative. In this work, we newly developed a lead ion (Pb²⁺) activation technique, called lead-start isothermal amplification, allowing on-demand activation or deactivation of DNA polymerases at room temperature. We systematically correlated the DNA polymerase inhibition by the TQ30 aptamer with Pb²⁺-responsive strand cleavage by the GR5 DNAzyme, and relying on the type of interconnectors, Pb²⁺ successfully served as an initiator or a terminator of isothermal DNA amplification. Our lead-start isothermal amplification was exceptionally Pb²⁺-specific, dramatically increasing the enzymatic activity of DNA polymerase (>25 times) only by Pb²⁺ introduction. Despite one-by-one sample preparation, a number of reactions can begin and end at the same time, sharing the identical amplification conditions, and thereby allowing their quantitative analysis and comparison. Using a portable UV lamp and a smartphone camera, we also succeeded in quantifying the amounts of clinically important and human papillomavirus type 16 genes in human serum and SARS-CoV-2's nucleocapsid genes in human serum and saliva, and the limit of detection was as low as 0.1 nM, highly applicable for actual PoC tests in the field with no purification process.

A review on silver-mediated DNA base pairs: methodology and application

The investigation of the interaction between metal ions and DNA has always attracted much attention in the fields of bioinorganic chemistry, supramolecular coordination chemistry, and DNA nanotechnology. Its mode of action can be simply divided into two aspects. On the one hand, it is non-specific electrostatic adsorption, mainly including Na⁺, K⁺, Mg²⁺, Ca²⁺ and other physiologically regulating ions; on the other hand, it is specific covalent binding, such as Pt²⁺, Hg²⁺, Ag⁺ and other heavy metal ions. This article focuses on the mechanism of action between Ag⁺ and DNA mismatch pair C-C, and summarizes its main characterization methods and various applications. It aims to provide a certain reference for the field of biological devices. With the development of cryo-electron microscopy and liquidcell TEM, the structure of C-Ag⁺-C is expected to be further characterized, which will be more widely used.

Metal Complexes as DNA Synthesis and/or Repair Inhibitors: Anticancer and Antimicrobial Agents

Medicinal inorganic chemistry involving the utilization of metal-based compounds as therapeutics has become a field showing distinct promise. DNA and RNA are ideal drug targets for therapeutic intervention in the case of various diseases, such as cancer and microbial infection. Metals play a vital role in medicine, with at least 10 metals known to be essential for human life and a further 46 nonessential metals having been involved in drug therapies and diagnosis. These metal-based complexes interact with DNA in various ways, and are often delivered as prodrugs which undergo activation in vivo. Metal complexes cause DNA crosslinking, leading to the inhibition of DNA synthesis and repair. In this review, the various interactions of metal complexes with DNA nucleic acids, as well as the underlying mechanism of action, were highlighted. Furthermore, we also discussed various tools used to investigate the interaction between metal complexes and the DNA. The tools included in vitro techniques such as spectroscopy and electrophoresis, and in silico studies such as protein docking and density-functional theory that are highlighted for preclinical development.

Enzymatic construction of metal-mediated nucleic acid base pairs

Artificial metal base pairs have become increasingly important in nucleic acids chemistry due to their high thermal stability, water solubility, orthogonality to natural base pairs, and low cost of production. These interesting properties combined with ease of chemical and enzymatic synthesis have prompted their use in several practical applications, including the construction of nanomolecular devices, ions sensors, and metal nanowires. Chemical synthesis of metal base pairs is highly efficient and enables the rapid screening of novel metal base pair candidates. However, chemical synthesis is limited to rather short oligonucleotides and requires rather important synthetic efforts. Herein, we discuss recent progress made for the enzymatic construction of metal base pairs that can alleviate some of these limitations. First, we highlight the possibility of generating metal base pairs using canonical nucleotides and then describe how modified nucleotides can be used in this context. We also provide a description of the main analytical techniques used for the analysis of the nature and the formation of metal base pairs together with relevant examples of their applications.

Switching the activity of Taq polymerase using clamp-like triplex aptamer structure

In nature, allostery is the principal approach for regulating cellular processes and pathways. Inspired by nature, structure-switching aptamer-based nanodevices are widely used in artificial biotechnologies. However, the canonical aptamer structures in the nanodevices usually adopt a duplex form, which limits the flexibility and controllability. Here, a new regulating strategy based on a clamp-like triplex aptamer structure (CLTAS) was proposed for switching DNA polymerase activity via conformational changes. It was demonstrated that the polymerase activity could be regulated by either adjusting structure parameters or dynamic reactions including strand displacement or enzymatic digestion. Compared with the duplex aptamer structure, the CLTAS possesses programmability, excellent affinity and high discrimination efficiency. The CLTAS was successfully applied to distinguish single-base mismatches. The strategy expands the application scope of triplex structures and shows potential in biosensing and programmable nanomachines.

A DNAzyme-mediated logic gate system based on Ag(I)-cysteine

Ag+ plays an important role in DNA mismatch technology due to its affinity for cytosine in DNA. This article introduces a strategy to control the enzyme digesting reaction by utilizing the characteristics of C-Ag+-C mismatches, effectively regulating and controlling the activity of the E6 DNAzyme via changing the structure of its conservative domain. We designed a series of basic logic gates, a "Yes" Gate, an "Or" Gate and an "Inhibit" Gate. Cysteine (Cys) can combine with Ag+, reducing the concentration of Ag+ in solution, thus restraining the C-Ag+-C mismatch effect. Based on this principle, we regard Cys as a threshold, and designed a type of "Inhibit" Gate based on input quantity by changing the concentration of Ag+, thus generating different statues of logic output. On this basis, the E6 DNAzyme and Ag10c DNAzyme can be integrated into new systems with the function of logic operation circuit based on the control of Ag+ concentration in solution. This system could represent three different states of logical expression by controlling the quantity of Ag+ and Cys.

Allosteric Regulation of DNAzyme Activities through Intrastrand Transformation Induced by Cu(II)-Mediated Artificial Base Pairing

Allosteric regulation is gaining increasing attention as a basis for the production of stimuli-responsive materials in many research areas including DNA nanotechnology. We expected that metal-mediated artificial base pairs, consisting of ligand-type nucleotides and a bridging metal ion, could serve as allosteric units that regulate the function of DNA molecules. In this study, we established a rational design strategy for developing Cu^II-responsive allosteric DNAzymes by incorporating artificial hydroxypyridone ligand-type nucleotides (H) that form a Cu^II-mediated base pair (H-Cu^II-H). We devised a new enzymatic method using a standard DNA polymerase and a ligase to prepare DNA strands containing H nucleotides. Previously reported DNAzymes were modified by introducing a H-H pair into the stem region, and the stem-loop sequences were altered so that the structure becomes catalytically inactive in the absence of Cu^II ions. The formation of a H-Cu^II-H base pair triggers intrastrand transformation from the inactive to the active structure, enabling allosteric regulation of the DNAzyme activity in response to Cu^II ions. The activity of the H-modified DNAzyme was reversibly switched by the addition and removal of Cu^II ions under isothermal conditions. Similarly, by incorporating a H-Cu^II-H pair into an in vitro-selected Ag^I-dependent DNAzyme, we have developed a DNAzyme that exhibits an AND logic-gate response to Cu^II and Ag^I ions. The rational design strategy and the easy enzymatic synthetic method presented here provide a versatile way to develop a variety of metal-responsive allosteric DNA materials, including molecular machines and logic circuits, based on metal-mediated artificial base pairing.

Enzymatic formation of consecutive thymine–HgII–thymine base pairs by DNA polymerases

Ten consecutive T–Hg^II–T base pairs were successfully formed by DNA polymerase-catalyzed primer extension reactions.

A glass nanopore ionic sensor for surface charge analysis

Surface charge-based nanopore characterization techniques unfold unique properties and provide a powerful platform for a variety of sensing applications. In this paper, we have proposed a nanoconfined inner wall surface charge characterization method with glass nanopores. The glass nanopores were functionalized with DNA aptamers that were designed for mercury (Hg²⁺) ion immobilization by forming thymine–Hg²⁺–thymine structures. The surface charge of the nanopores was modulated by surface chemistry and Hg²⁺ ion concentrations and analysed by combining zeta potential measurements on glass slides and the ionic current rectification ratio of the nanopores. Also, 1 pM Hg²⁺ ions could be detected by the nanopores.

Surface charge-based nanopore characterization techniques unfold unique properties and provide a powerful platform for a variety of sensing applications.

On the Enzymatic Formation of Metal Base Pairs with Thiolated and pKa -Perturbed Nucleotides

The formation of artificial metal base pairs is an alluring and versatile method for the functionalization of nucleic acids. Access to DNA functionalized with metal base pairs is granted mainly by solid-phase synthesis. An alternative, yet underexplored method, envisions the installation of metal base pairs through the polymerization of modified nucleoside triphosphates. Herein, we have explored the possibility of using thiolated and pK_a -perturbed nucleotides for the enzymatic construction of artificial metal base pairs. The thiolated nucleotides S2C, S6G, and S4T as well as the fluorinated analogue 5FU are readily incorporated opposite a templating S4T nucleotide through the guidance of metal cations. Multiple incorporation of the modified nucleotides along with polymerase bypass of the unnatural base pairs are also possible under certain conditions. The thiolated nucleotides S4T, S4T, S2C, and S6G were also shown to be compatible with the synthesis of modified, high molecular weight single-stranded (ss)DNA products through TdT-mediated tailing reactions. Thus, sulfur-substitution and pK_a perturbation represent alternative strategies for the design of modified nucleotides compatible with the enzymatic construction of metal base pairs.

Aptamer-based regulation of transcription circuits

We propose synthetic DNA/RNA transcription circuits based on specific aptamer recognition. By mimicking transcription factor regulation, combined with specific enzyme/DNA aptamer binding, multiple biomolecules including DNA, RNA, polymerase, restriction enzymes and methylase were used as regulators. In addition, multi-level cascading networks and methylation-switch circuits were also established. This regulation strategy has the potential to expand the toolkit of in vitro synthetic biology.

Target-Activated DNA Polymerase Activity for Sensitive RNase H Activity Assay

Herein, the ribonuclease H (RNase H) activity assay based on the target-activated DNA polymerase activity is described. In this method, a detection probe composed of two functional sequences, a binding site for DNA polymerase and a catalytic substrate for RNase H, serves as a key component. The detection probe, at its initial state, suppresses the DNA polymerase activity, but it becomes destabilized by RNase H, which specifically hydrolyzes RNA in RNA/DNA hybrid duplexes. As a result, DNA polymerase recovers its activity and initiates multiple primer extension reactions in a separate TaqMan probe-based signal transduction module, leading to a significantly enhanced fluorescence "turn-on" signal. This assay can detect RNase H activity as low as 0.016 U mL^-1 under optimized conditions. Furthermore, its potential use for evaluating RNase H inhibitors, which have been considered potential therapeutic agents against acquired immune deficiency syndrome (AIDS), is successfully explored. In summary, this approach is quite promising for the sensitive and accurate determination of enzyme activity and inhibitor screening.

Sensitive and specific detection of proteins based on target-responsive DNA polymerase activity

We herein describe a novel method for the detection of target protein based on the target-responsive DNA polymerase activity. In the sensor, two different types of DNA aptamers with the respective functions: one binds to the target protein and the other binds to DNA polymerase, are rationally engineered and combined to form the detection probe that regulates DNA polymerase activity in response to the target protein. In the presence of target protein, the detection probe becomes destabilized and stops the inhibition of DNA polymerase activity. Consequently, the active DNA polymerase initiates the primer extension reaction on the target-specific DNA aptamer, which recycles the target protein to promote another activation cycle of DNA polymerase. In addition, DNA polymerase also catalyzes the primer extension reaction on the primer/template complex in conjugation with TaqMan probe, leading to the significantly enhanced fluorescence intensities. With this novel strategy, we detected a model target protein, lysozyme with a limit of detection as low as 0.80 nM. In addition, the practical applicability of this system was successfully demonstrated by determining lysozyme in human serum.

Simulated enzyme inhibition-based strategy for ultrasensitive colorimetric biothiol detection based on nanoperoxidases

A simulated enzyme inhibition-based strategy based on a nanoperoxidase mimic was adopted for ultrasensitive colorimetric glutathione detection.

Dual-entropy-driven catalytic amplification reaction for ultra-sensitive and visible detection of Hg2+ in water based on thymine–Hg2+–thymine coordination chemistry

An ultra-sensitive and visible Hg²⁺ detection strategy was established.

HgII binds to C-T mismatches with high affinity

Binding reactions of HgII and AgI to pyrimidine-pyrimidine mismatches in duplex DNA were characterized using fluorescent nucleobase analogs, thermal denaturation and 1H NMR. Unlike AgI, HgII exhibited stoichiometric, site-specific binding of C-T mismatches. The on- and off-rates of HgII binding were approximately 10-fold faster to C-T mismatches (kon ≈ 105 M-1 s-1, koff ≈ 10-3 s-1) as compared to T-T mismatches (kon ≈ 104 M-1 s-1, koff ≈ 10-4 s-1), resulting in very similar equilibrium binding affinities for both types of 'all natural' metallo base pairs (Kd ≈ 10-150 nM). These results are in contrast to thermal denaturation analyses, where duplexes containing T-T mismatches exhibited much larger increases in thermal stability upon addition of HgII (ΔTm = 6-19°C), as compared to those containing C-T mismatches (ΔTm = 1-4°C). In addition to revealing the high thermodynamic and kinetic stabilities of C-HgII-T base pairs, our results demonstrate that fluorescent nucleobase analogs enable highly sensitive detection and characterization of metal-mediated base pairs - even in situations where metal binding has little or no impact on the thermal stability of the duplex.

Binding-responsive catalysis of Taq DNA polymerase for the sensitive and selective detection of cell-surface proteins

Here we develop a new method for the sensitive and selective detection of cell-surface proteins with an aptamer probe designed for binding-responsive catalysis of Taq DNA polymerase. Taking the biotin receptor as a model, the method allows the detection of target protein on surfaces of different types of cancer cells.

Metal-Mediated Base Pairs: From Characterization to Application

The investigation of metal-mediated base pairs and the development of their applications represent a prominent area of research at the border of bioinorganic chemistry and supramolecular coordination chemistry. In metal-mediated base pairs, the complementary nucleobases in a nucleic acid duplex are connected by coordinate bonds to an embedded metal ion rather than by hydrogen bonds. Because metal-mediated base pairs facilitate a site-specific introduction of metal-based functionality into nucleic acids, they are ideally suited for use in DNA nanotechnology. This minireview gives an overview of the general requirements that need to be considered when devising a new metal-mediated base pair, both from a conceptual and from an experimental point of view. In addition, it presents selected recent applications of metal-modified nucleic acids to indicate the scope of metal-mediated base pairing.

Bubble-Mediated Ultrasensitive Multiplex Detection of Metal Ions in Three-Dimensional DNA Nanostructure-Encoded Microchannels

The development of rapid and sensitive point-of-test devices for on-site monitoring of heavy-metal contamination has great scientific and technological importance. However, developing fast, inexpensive, and sensitive microarray sensors to achieve such a goal remains challenging. In this work, we present a DNA-nanostructured microarray (DNM) with a tubular three-dimensional sensing surface and an ordered nanotopography. This microarray enables enhanced molecular interaction toward the rapid and sensitive multiplex detection of heavy-metal ions. In our design, the use of DNA tetrahedral-structured probes engineers the sensing interface with spatially resolved and density-tunable sensing spots that improve the microconfined molecular recognition. A bubble-mediated shuttle reaction was used inside the DNM-functionalized microchannel to improve the target-capturing efficiency. Using this novel DNM biosensor, the sensitive and selective detection of multiple heavy-metal ions (i.e., Hg²⁺, Ag⁺, and Pb²⁺) was achieved within 5 min, the detection limit was down to 10, 10, and 20 nM for Hg²⁺, Ag⁺, and Pb²⁺, respectively. The feasibility of our DNM sensor was further demonstrated by probing heavy-metal ions in real water samples with a direct optical readout. Beyond metal ions, this unique DNM sensor can easily be extended to in vitro bioassays and clinical diagnostics.

Stimuli-Responsive Self-Assembled DNA Nanomaterials for Biomedical Applications

Stimuli-responsive DNA-based materials represent a major class of remarkable functional nanomaterials for nano-biotechnological applications. In this review, recent progress in the development of stimuli-responsive systems based on self-assembled DNA nanostructures is introduced and classified. Representative examples are presented in terms of their design, working principles and mechanisms to trigger the response of the stimuli-responsive DNA system upon expose to a large variety of stimuli including pH, metal ions, oligonucleotides, small molecules, enzymes, heat, and light. Substantial in vitro studies have clearly revealed the advantages of the use of stimuli-responsive DNA nanomaterials in different biomedical applications, particularly for biosensing, drug delivery, therapy and diagnostic purposes in addition to bio-computing. Some of the challenges faced and suggestions for further development are also highlighted.

Allosteric DNA nanoswitches for controlled release of a molecular cargo triggered by biological inputs

A rationally designed new class of DNA-based nanoswitches allosterically regulated by specific biological targets, antibodies and transcription factors, can load and release a molecular cargo in a controlled fashion.

Here we demonstrate the rational design of a new class of DNA-based nanoswitches which are allosterically regulated by specific biological targets, antibodies and transcription factors, and are able to load and release a molecular cargo (i.e. doxorubicin) in a controlled fashion. In our first model system we rationally designed a stem-loop DNA-nanoswitch that adopts two mutually exclusive conformations: a “Load” conformation containing a doxorubicin-intercalating domain and a “Release” conformation containing a duplex portion recognized by a specific transcription-factor (here Tata Binding Protein). The binding of the transcription factor pushes this conformational equilibrium towards the “Release” state thus leading to doxorubicin release from the nanoswitch. In our second model system we designed a similar stem-loop DNA-nanoswitch for which conformational change and subsequent doxorubicin release can be triggered by a specific antibody. Our approach augments the current tool kit of smart drug release mechanisms regulated by different biological inputs.

Aptamer-mediated universal enzyme assay based on target-triggered DNA polymerase activity

We herein describe an innovative method for a universal fluorescence turn-on enzyme assay, which relies on the target enzyme-triggered DNA polymerase activity. In the first target recognition step, the target enzyme is designed to destabilize detection probe derived from an aptamer specific to DNA polymerase containing the overhang sequence and the complementary blocker DNA, which consequently leads to the recovery of DNA polymerase activity inhibited by the detection probe. This target-triggered polymerase activity is monitored in the second signal transduction step based on primer extension reaction coupled with TaqMan probe. Utilizing this design principle, we have successfully detected the activities of two model enzymes, exonuclease I and uracil DNA glycosylase with high sensitivity and selectivity. Since this strategy is composed of separated target recognition and signal transduction modules, it could be universally employed for the sensitive determination of numerous different target enzymes by simply redesigning the overhang sequence of detection probe, while keeping TaqMan probe-based signal transduction module as a universal signaling tool.