Emerging Electrochromic Materials and Devices for Future Displays

With the rapid development of optoelectronic fields, electrochromic (EC) materials and devices have received remarkable attention and have shown attractive potential for use in emerging wearable and portable electronics, electronic papers/billboards, see-through displays, and other new-generation displays, due to the advantages of low power consumption, easy viewing, flexibility, stretchability, etc. Despite continuous progress in related fields, determining how to make electrochromics truly meet the requirements of mature displays (e.g., ideal overall performance) has been a long-term problem. Therefore, the commercialization of relevant high-quality products is still in its infancy. In this review, we will focus on the progress in emerging EC materials and devices for potential displays, including two mainstream EC display prototypes (segmented displays and pixel displays) and their commercial applications. Among these topics, the related materials/devices, EC performance, construction approaches, and processing techniques are comprehensively disscussed and reviewed. We also outline the current barriers with possible solutions and discuss the future of this field.

Reversible Multielectron Release from Redox-Active Three-Dimensional Molecular Barrels with Ruthenium-Alkenyl Moieties

Three-dimensional molecular barrels Ru₆-4 and Ru₆-5 were synthesized in high yields from dinuclear ruthenium-vinyl clamps and tritopic triphenylamine-derived carboxylate linkers and characterized by multinuclear NMR spectroscopy including ¹H-¹H COSY and ¹H DOSY measurements, high-resolution electrospray ionization mass spectrometry, and X-ray crystallography. The metal frameworks of the cages adopt the shape of twisted trigonal prisms, and they crystallize as racemic mixtures of interdigitating Δ- and Λ-enantiomers with a tight columnar packing in Ru₆-4. Electrochemical studies and redox titrations revealed that the cages are able to release up to 11 electrons on the voltammetric timescale and that their cage structures persist up to the hexacation level. IR and UV-vis-near-infrared spectroelectrochemical studies confirm substituent-dependent intramolecular electronic communication within the π-conjugated 1,3-divinylphenylene backbone in the tricationic states, where all three divinylphenylene-bridged diruthenium clamps are present in mixed-valent radical cation states. The formation of 1:3 charge-transfer salts with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane as the electron acceptor is also demonstrated.

Tetraruthenium Macrocycles with Laterally Extended Bis(alkenyl)quinoxaline Ligands and Their F4TCNQ•− Salts

We report on the tetraruthenium macrocycles Ru4-5 and -6 with a π-conjugated pyrene-appended 5,8-divinylquinoxaline ligand and either isophthalate or thiophenyl-2,5-dicarboxylate linkers and their charge-transfer salts formed by oxidation with two equivalents of F4TCNQ. Both macrocyclic complexes were characterized by NMR spectroscopy, mass spectrometry, cyclic and square-wave voltammetry, and by IR, UV–vis–NIR, and EPR spectroscopy in their various oxidation states.

A "Pretender" Croconate-Bridged Macrocyclic Tetraruthenium Complex: Sizable Redox Potential Splittings despite Electronically Insulated Divinylphenylene Diruthenium Entities

Careful optimization of the reaction conditions provided access to the particularly small tetraruthenium macrocycle ²Ru₂Ph-Croc, which is composed out of two redox-active divinylphenylene-bridged diruthenium entities {Ru}-1,4-CH=CH-C₆H₄-CH=CH-{Ru} (Ru₂Ph; {Ru} = Ru(CO)Cl(PⁱPr₃)₂) and two likewise redox-active and potentially non-innocent croconate linkers. According to single X-ray diffraction analysis, the central cavity of ²Ru₂Ph-Croc is shielded by the bulky PⁱPr₃ ligands, which come into close contact. Cyclic voltammetry revealed two pairs of split anodic waves in the weakly ion pairing CH₂Cl₂/NBu₄BAr^F₂₄ (BAr^F₂₄ = [B{C₆H₃(CF₃)₂-3,5}₄]⁻ electrolyte, while the third and fourth waves fall together in CH₂Cl₂/NBu₄PF₆. The various oxidized forms were electrogenerated and scrutinized by IR and UV/Vis/NIR spectroscopy. This allowed us to assign the individual oxidations to the metal-organic Ru₂Ph entities within ²Ru₂Ph-Croc, while the croconate ligands remain largely uninvolved. The lack of specific NIR bands that could be assigned to intervalence charge transfer (IVCT) in the mono- and trications indicates that these mixed-valent species are strictly charge-localized. ²Ru₂Ph-Croc is hence an exemplary case, where stepwise IR band shifts and quite sizable redox splittings between consecutive one-electron oxidations would, on first sight, point to electronic coupling, but are exclusively due to electrostatic and inductive effects. This makes ²Ru₂Ph-Croc a true “pretender”.

Redox-Induced Hydrogen Bond Reorientation Mimicking Electronic Coupling in Mixed-Valent Diruthenium and Macrocyclic Tetraruthenium Complexes

We present the coordination-driven self-assembly of three tetranuclear metallacycles containing intracyclic NH₂, OH, or OMe functionalities through the combination of various isophthalic acid building blocks with a divinylphenylene diruthenium complex. All new complexes of this study were characterized by means of nuclear magnetic resonance spectroscopy, ultrahigh-resolution ESI mass spectrometry, cyclic and square wave voltammetry and, in two cases, X-ray diffraction. The hydroxy functionalized macrocycle 4-BOH and the corresponding half-cycle 2-OH stand out, as their intracyclic OH···O hydrogen bonds stabilize their mixed-valent one- (2-OH, 4-BOH) and three-electron-oxidized states (4-BOH). Despite sizable redox splittings between all one-electron waves, the mixed-valent monocations and trications do not exhibit any intervalence charge-transfer band, assignable to through-bond electronic coupling, but nevertheless display distinct IR band shifts of their charge-sensitive Ru(CO) tags. We ascribe these seemingly contradicting observations to a redox-induced shuffling of the OH···O hydrogen bond(s) to the remaining, more electron-rich, reduced redox site.

Ring size matters: supramolecular isomerism in self-assembled redox-active tetra- and hexaruthenium macrocycles

Self-assembly of a divinylthiophene-bridged diruthenium complex with 2,5-furandicarboxylate leads to the formation of two macrocyclic structures that differ solely with regard to their respective nuclearities. Both supramolecular isomers were fully characterized and the conversion of the hexa- to the tetraruthenium macrocycle was followed by NMR monitoring.

Tuning the structure and the properties of dithiafulvene metalla-assembled tweezers

An electroactive M₂L₂ metalla-macrocycle constructed through coordination driven self-assembly dimerizes upon oxidation and binds an electro-deficient substrate with a high association constant.

Nanocrystalline Sb-doped SnO2 films modified with cyclometalated ruthenium complexes for two-step electrochromism

Sb-Doped nanocrystalline SnO2 (SnO2:Sb) thin films functionalized with cyclometalated ruthenium complexes 1 or 2 on FTO conductive glasses have been prepared and characterized. These complexes contain a redox-active amine unit separated from the ruthenium ion by a phenyl or biphenyl linker, respectively, to modify the absorption wavelengths at different redox states. Near-infrared electrochromism of both films has been examined by oxidative spectroelectrochemical measurements and double-potential-step chronoamperometry. A contrast ratio (ΔT%) of 33% at 1070 nm and 63% at 696 nm has been achieved for the SnO2:Sb/1 film in two stepwise oxidation processes, respectively. The other film with complex 2 shows two-step electrochromism at 1310 and 806 nm with ΔT% of 36% and 76%, respectively. The response time of electrochromic switching is around a few seconds. Taking advantage of the good contrast ratio, the rapid response, and the long retention time of each oxidation state, these films have been successfully used to demonstrate surface-confined flip-flop memory functions with a high ON/OFF ratio.

Tetraruthenium Metallamacrocycles with Potentially Coordinating Appended Functionalities

We present four new tetraruthenium macrocycles built from two 1,4-divinylphenylene diruthenium and two isophthalic acid building blocks with peripheral, potentially mono- or tridentate donor functions attached to the isophthalic linkers. These macrocycles are characterized by multinuclear NMR spectroscopy, mass spectrometry and, in the case of the thioacetyl-appended complex 4, by X-ray crystallography. Cyclic and square wave voltammetry establish that the macrocycles can be oxidized in four consecutive redox steps that come as two pairs of two closely spaced one-electron waves. Spectroscopic changes observed during IR and UV/Vis/NIR spectroelectrochemical experiments (NIR = near infrared) show that the isophthalate linkers insulate the electroactive divinylphenylene diruthenium moieties against each other. The macrocycles exhibit nevertheless pronounced polyelectrochromism with highly intense absorptions in the Vis (2+/4+ states) and the NIR (2+ states) with extinction coefficients of up to >100,000 M−1·cm−1. The strong absorptivity enhancement with respect to the individual divinylphenylene diruthenium building blocks is attributed to conformational restrictions imposed by the macrocycle backbone. Moreover, the di- and tetracations of these macrocycles are paramagnetic as revealed by EPR spectroscopy.

Anodic electrochemistry of mono- and dinuclear aminophenylferrocene and diphenylaminoferrocene complexes

Two related three-membered series of nonlinear aminophenylferrocene and diphenylaminoferrocene complexes were prepared and characterized by 1H and 13C NMR spectroscopy. The first series consists of 4-(diphenylamino)phenylferrocene (TPA-Fc, 1a), its dimethoxy-substituted tetraphenylphenylenediamine derivative (M2TPPD-Fc, 1c), and the triphenylamine-bridged bis(ferrocenyl) complex (Fc-TPA-Fc, 1b). The second series involves bis(4-methoxyphenyl)aminoferrocene (M2DPA-Fc, 1d), 4-methoxyphenylaminoferrocene (MPA-Fc) with N-phenyl-appended terminal TPA (1e), and the corresponding bis(MPA-Fc) complex with bridging TPA (1f). The structure of complex 1d was further confirmed by single crystal X-ray diffraction. Combined investigations, based on anodic voltammetry, UV-vis-NIR spectroelectrochemistry and density functional theory (DFT) calculations, were conducted to illustrate the influence of the integration of multiple redox-active components on the sequential oxidation of these complexes. The first anodic steps in 1a-1f are localized preferentially on the ferrocenyl units, followed by oxidation of the TPA or TPPD moieties (absent in 1d). Irreversible oxidation of the ferrocene-appended strong donor DPA/MPA units in 1d-1f terminates the anodic series. The one-electron oxidation of the triphenylamine-bridged diferrocenyl (1b) and bis(phenylaminoferrocenyl) (1f) complexes triggers their facile redox disproportionation to dicationic bis(ferrocenium) products.

Macrocyclic Triruthenium Complexes Having Electronically Coupled Mixed-Valent States

5-Ethynyl-2-furancarboxylic acid and 3-ethynylbenzoic acid self-assemble with [HRu(CO)Cl(PiPr₃ )₂ ] to form macrocyclic C₃ -symmetric triangular triruthenium alkenyl complexes [{Ru(CO)(PiPr₃ )₂ (CH=CHArCOO)}₃ ] (Ar=C₆ H₄ : 1-B, Ar=C₄ H₂ O: 1-F), which were characterized by multinuclear NMR spectroscopy, high-resolution ESI mass spectrometry, and, in the case of 1-B, by X-ray crystallography. Electrochemical studies indicate that the macrocycles are oxidized in three consecutive one-electron steps. The mixed-valent states obtained by electrochemical or chemical oxidation show signs of valence delocalization, which makes these complexes rare examples of molecule-based conductive loops with through-bond charge delocalization.

Redox-driven porphyrin based systems for new luminescent molecular switches

This work explores the possibility of controlling the fluorescence of porphyrins via oxidation of a ruthenium acetylide unit. The modulation depends on the nature of the porphyrin unit(s).

Ferrocene- and Biferrocene-Containing Macrocycles towards Single-Molecule Electronics

Cyclic multiredox centered systems are currently of great interest, with new compounds being reported and developments made in understanding their behavior. Efficient, elegant, and high‐yielding (for macrocyclic species) synthetic routes to two novel alkynyl‐conjugated multiple ferrocene‐ and biferrocene‐containing cyclic compounds are presented. The electronic interactions between the individual ferrocene units have been investigated through electrochemistry, spectroelectrochemistry, density functional theory (DFT), and crystallography to understand the effect of cyclization on the electronic properties and structure.

Multistep Oxidation of Diethynyl Oligophenylamine-Bridged Diruthenium and Diiron Complexes

Homo-dinuclear nonlinear complexes [{M(dppe)Cp*}₂{μ-(-C≡C)₂X}] (dppe = 1,2-bis(diphenylphosphino)ethane; Cp* = η⁵-C₅Me₅; X = triphenylamine (TPA), M = Ru (1a) and Fe (1b); X = N,N,N',N'-tetraphenylphenylene-1,4-diamine (TPPD), M = Ru (2a)) were prepared and characterized by ¹H, ¹³C, and ³¹P NMR spectroscopy and single-crystal X-ray diffraction (1a, 2a). Attempts to prepare the diiron analogue of 2a were not successful. Experimental data obtained from cyclic voltammetry, square wave voltammetry, UV-vis-NIR (NIR = near-infrared) spectro-electrochemistry, and very informative IR spectro-electrochemistry in the C≡C stretching region, combined with density functional theory calculations, afford to make an emphasizing assessment of the close association between the metal-ethynyl termini and the oligophenylamine bridge core as well as their respective involvement in sequential one-electron oxidations of these complexes. The anodic behavior of the homo-bimetallic complexes depends strongly both on the metal center and the length of the oligophenylamine bridge core. The poorly separated first two oxidations of diiron complex 1b are localized on the electronically nearly independent Fe termini. In contrast, diruthenium complex 1a exhibits a significantly delocalized character and a marked electronic communication between the ruthenium centers through the diethynyl-TPA bridge. The ruthenium-ethynyl halves in 2a, separated by the doubly extended and more flexible TPPD bridge core, show a lower degree of electronic coupling, resulting in close-lying first two anodic waves and the NIR electronic absorption of [2a]⁺ with an indistinctive intervalence charge transfer character. Finally, the third anodic waves in the voltammetric responses of the homo-bimetallic complexes are associated with the concurrent exclusive oxidation of the TPA or TPPD bridge cores.

Non-innocence and mixed valency in tri- and tetranuclear ruthenium complexes of a heteroquinone bridging ligand

The potential of a heteroquinone to bridge up to four metal fragments has been structurally elucidated and multiple redox processes have been ascertained.

Localized Mixed-Valence and Redox Activity within a Triazole-Bridged Dinucleating Ligand upon Coordination to Palladium

The new dinucleating redox-active ligand (L^H4 ), bearing two redox-active NNO-binding pockets linked by a 1,2,3-triazole unit, is synthetically readily accessible. Coordination to two equivalents of Pd^II resulted in the formation of paramagnetic (S=1/2 ) dinuclear Pd complexes with a κ² -N,N'-bridging triazole and a single bridging chlorido or azido ligand. A combined spectroscopic, spectroelectrochemical, and computational study confirmed Robin-Day Class II mixed-valence within the redox-active ligand, with little influence of the secondary bridging anionic ligand. Intervalence charge transfer was observed between the two ligand binding pockets. Selective one-electron oxidation allowed for isolation of the corresponding cationic ligand-based diradical species. SQUID (super-conducting quantum interference device) measurements of these compounds revealed weak anti-ferromagnetic spin coupling between the two ligand-centered radicals and an overall singlet ground state in the solid state, which is supported by DFT calculations. The rigid and conjugated dinucleating redox-active ligand framework thus allows for efficient electronic communication between the two binding pockets.