Proton-Enriched Alginate-Graphene Hydrogel Microreactor for Enhanced Hydrogen Peroxide Photosynthesis

Efficient synthesis of H2O2 via photocatalytic oxygen reduction without sacrificial agents is challenging due to inadequate proton supply from water and difficulty in maintaining O-O bond during O2 activation. Herein, we developed a straightforward strategy involving a proton-rich hydrogel cross-linked by metal ions [M(n)], which is designed to facilitate the selective production of H2O2 through proton relay and metal ion-assisted detachment of crucial intermediates. The hydrogel comprises CdS/graphene and alginate cross-linked by metal ions via O=C-O-M(n) bonds. Efficient O2 reduction and hydrogenation occurred, benefitting from the collaboration between proton-rich alginate and the photocatalytically active CdS/graphene. Meanwhile, the O=C-O-M(n) bonds enhance the electron density of α-carbon sites on graphene, crucial for O2 activation and *OOH intermediate detachment, preventing deeper O-O bond cleavage. The role of metal ions in promoting *OOH desorption was demonstrated through Lewis acidity-dependent activity, with Y(III) having the highest activity, followed by Lu(III), La(III), and Ca(II).

Anodic H2O2 Generation in Carbonate-Based Electrolytes-Mechanistic Insight from Scanning Electrochemical Microscopy

For the anodic H2O2 generation, it has been shown that the electrolyte composition can steer the reaction pathway toward increased H2O2 generation. Previous efforts made on composition optimization found that the impact of the molar fraction of carbonate species varies for different anodes, and therefore, controversies remain concerning the reaction pathways as well as the species involved in H2O2 formation. Considering that water oxidation results in the liberation of protons within the anode microenvironment, the corresponding acidification would cause an equilibrium shift between carbonate species, which in turn may modulate the reaction pathway. We determined the changes in the fraction of carbonate species in the vicinity of an anode by performing local pH measurements using a Au nanoelectrode positioned in close proximity to an operating anode by shear-force scanning electrochemical microscopy (SECM). It could be confirmed that the main anionic species at the interface is HCO3 -, at potentials where H2O2 is preferentially formed, regardless of the pH value in the bulk. The simultaneous use of a Au-Pt double barrel microelectrode in generator-collector SECM measurements demonstrates that the local HCO3 - concentration is collectively determined by the oxidation current, buffer capacity, and bulk pH of the electrolyte.

Photoelectrochemical Synthesis of Hydrogen Peroxide from Saline Water via the Two-Electron Water Oxidation Reaction

Hydrogen peroxide (H2O2) production on the anode is more valuable than oxygen and chlorine evolution for photoelectrochemical saline water splitting. In this work, by the introduction of bicarbonate (HCO3-), H2O2 is produced from saline water (2 M KHCO3 + 0.5 M NaCl aqueous solution) via the two-electron water oxidation reaction by a photoanode of bismuth vanadate (BiVO4). Furthermore, the Faradaic efficiency (FE) and accumulation for H2O2 are improved by coating antimony tetroxide (Sb2O4) on BiVO4. A H2O2 FE of 26% at 1.54 V vs RHE is obtained by Sb2O4/BiVO4 and 49 ppm of H2O2 is accumulated after a 135 min chronoamperometry. Similar to that in KHCO3 pure water solution, infrared spectroscopy and electrochemical analysis confirm that HCO3- plays a surface-mediating role in the formation of H2O2 in KHCO3 saline water solution. The presence of HCO3- in the electrolyte is able to not only increase the photocurrent density but also effectively inhibit the chlorine evolution reaction.

Peroxodicarbonate - a renaissance of an electrochemically generated green oxidizer

The direct anodic conversion of alkali carbonates in aqueous media provides access to peroxodicarbonate, which is a safe to use and green oxidizer. Although first reports date back around 150 years, its low concentrations and limited thermal stability have consigned this reagent to oblivion. Boron-doped diamond anodes, novel electrolyser concepts for heat dissipation, and the mixed cation trick allow record breaking peroxodicarbonate concentrations >900 mM. The electrochemical generation of peroxodicarbonate was already demonstrated on a pilot scale. The inherent safety is ensured by the limited stability of the peroxodicarbonate solution, which decomposes under ambient conditions to oxygen and facilitates subsequent downstream processing. This peroxide has, in particular at higher concentrations, an unusual reactivity and seems to be an ideal reagent when peroxo-equivalents in combination with alkaline base are required. The conversions with peroxodicarbonate include the Dakin reaction, epoxidation, oxidation of amines (aliphatic and aromatic) and sulfur compounds, deborolative hydroxylation reactions, and many more. Since the base equivalents also represent the makeup chemical for pulping plants, peroxodicarbonate is an ideal reagent for the selective degradation of lignin to vanillin. Moreover, peroxodicarbonate can be used as a halogen-free bleaching agent. The emerging electrogeneration and use of this green platform oxidizer are surveyed for the first time.

BiVO4 Photoanode with NiV2O6 Back Contact Interfacial Layer for Improved Hole-Diffusion Length and Photoelectrochemical Water Oxidation Activity

The short hole diffusion length (HDL) and high interfacial recombination are among the main drawbacks of semiconductor-based solar energy systems. Surface passivation and introducing an interfacial layer are recognized for enhancing HDL and charge carrier separation. Herein, we introduced a facile recipe to design a pinholes-free BiVO4 photoanode with a NiV2O6 back contact interfacial (BCI) layer, marking a significant advancement in the HDL and photoelectrochemical activity. The fabricated BiVO4 photoanode with NiV2O6 BCI layer exhibits a 2-fold increase in the HDL compared to pristine BiVO4. Despite this improvement, we found that the front surface recombination still hinders the water oxidation process, as revealed by photoelectrochemical (PEC) studies employing Na2SO3 electron donors and by intensity-modulated photocurrent spectroscopy measurements. To address this limitation, the surface of the NiV2O6/BiVO4 photoanode was passivated with a cobalt phosphate electrocatalyst, resulting in a dramatic enhancement in the PEC performance. The optimized photoanode achieved a stable photocurrent density of 4.8 mA cm-2 at 1.23 VRHE, which is 12-fold higher than that of the pristine BiVO4 photoanode. Density Functional Theory (DFT) simulations revealed an abrupt electrostatic potential transition at the NiV2O6/BiVO4 interface with BiVO4 being more negative than NiV2O6. A strong built-in electric field is thus generated at the interface and drifts photogenerated electrons toward the NiV2O6 BCI layer and photogenerated holes toward the BiVO4 top layer. As a result, the back-surface recombination is minimized, and ultimately, the HDL is extended in agreement with the experimental findings.

Stabilizing BiVO4 Photoanode in Bicarbonate Electrolyte for Efficient Photoelectrocatalytic Alcohol Oxidation

In order to expand the application of bismuth vanadate (BiVO4) to the field of photoelectrochemistry, researchers have explored the potential of BiVO4 in catalyzing or degrading organic substances, potentially presenting a green and eco-friendly solution. A study was conducted to investigate the impact of electrolytes on the photocatalysis of benzyl alcohol by BiVO4. The research discovered that, in an acetonitrile electrolyte (pH 9) with sodium bicarbonate, BiVO4 catalyzed benzyl alcohol by introducing saturated V5+. This innovation addressed the issue of benzyl alcohol being susceptible to catalysis in an alkaline setting, as V5+ was prone to dissolution in pH 9 on BiVO4. The concern of the photocorrosion of BiVO4 was mitigated through two approaches. Firstly, the incorporation of a non-aqueous medium inhibited the formation of active material intermediates, reducing the susceptibility of the electrode surface to photocorrosion. Secondly, the presence of saturated V5+ further deterred the leaching of V5+. Concurrently, the production of carbonate radicals by bicarbonate played a vital role in catalyzing benzyl alcohol. The results show that, in this system, BiVO4 has the potential to oxidize benzyl alcohol by photocatalysis.

Controlled crystal facet of tungsten trioxide photoanode to improve on-demand hydrogen peroxide production for in-situ tetracycline degradation

Advanced oxidation processes utilizing hydrogen peroxide (H2O2) are widely employed for the treatment of organic pollutions. However, the conventional anthraquinone method for H2O2 synthesis is unsuitable for this application owing to its hazardous and costly nature. Alternative approaches involve a photoelectrochemical method. Herein, tungsten trioxide (WO3) photoanode has been used for the conversion of H2O into H2O2 through oxidation reaction from a PEC system, simultaneously utilizing in-situ generated hydroxyl (OH•) radicals for tetracycline degradation. By manipulating the ratio of crystal facets between (020) and (200) of the WO3 photoanode, a significant improvement in H2O2 production has been achieved by increasing the proportion of (020) facet. The production rate of WO3 photoanode enriched with the (020) facet is approximately 1.9 times higher than that enriched with (200) facet. This enhanced H2O2 production performance can be attributed to the improved formation of OH• radicals and the accelerated desorption of H2O2 on the (020) facet. Simultaneously, the in-situ generated OH• radicals are applied for tetracycline degradation. Under illumination of sunlight stimulator for 180 min, the optimal photoanode achieves a degradation rate of 86.7% for tetracycline. Furthermore, the resulting chemicals have been analyzed, revealing that C8H10O and C7H8O were formed as the primary products. Notably, these products exhibit significantly lower toxicity compared to tetracycline. This study presents a promising approach for the rational design of WO3 based photoanodes for oxidation reaction, including not only H2O2 production but also the efficient degradation of organic pollutants.

Synergistic photogeneration of reactive oxygen species by Fe species self-deposited on resorcinol-formaldehyde towards the degradation of phenols under visible light

In this study, a heterogeneous photo-Fenton catalyst of Fe species/resorcinol-formaldehyde (Fe/RF) was synthesized in the degradation process of phenols under visible light in a homogeneous photo-Fenton system. The in situ generated H2O2 by bare RF in the medium and the follow-added Fe2+ can construct homogeneous photo-Fenton system, and Fe/RF heterogeneous photo-Fenton catalyst was formed after the reaction through Fe species self-deposition. Due to the addition of Fe2+, more hydroxyl radical (·OH) generated in the homogeneous Fenton system, which lead to the higher degradation efficiency of phenols that achieved 90.5 % with 150 min. Fe/RF was subsequently formed and more C=O functional group in the structure appeared, which was beneficial to the production of H2O2. The above-mentioned results can be proved by the involved calculation and experimental results. Fe species, including Fe2+ and Fe3+, were beneficial to the conversion of reactive oxygen species (ROSs), and further improved the degradation efficiency of Phenols. Since the existence of photo-generated electrons, Fe2+ concentration in the solution can maintain a stable level. Interestingly, the degradation efficiency of Phenols was higher when Fe3+ was used instead of Fe2+ as the additive, which may be caused by the promotive effect of Fe3+ on singlet oxygen (1O2) generation. In addition, the degradation efficiency of Phenols under alkaline conditions was higher than that under acid conditions, which broke the limit of traditional Fenton process that works mostly in acidic medium. This study shows promising results in terms of synergistic photocatalytic/photo-Fenton processes for the degradation of organic pollutants in water.

Photoelectrocatalytic Surfactant Pollutant Degradation and Simultaneous Green Hydrogen Generation

For the first time, we demonstrate a photoelectrocatalysis technique for simultaneous surfactant pollutant degradation and green hydrogen generation using mesoporous WO3/BiVO4 photoanode under simulated sunlight irradiation. The materials properties such as morphology, crystallite structure, chemical environment, optical absorbance, and bandgap energy of the WO3/BiVO4 films are examined and discussed. We have tested the anionic type (sodium 2-naphthalenesulfonate (S2NS)) and cationic type surfactants (benzyl alkyl dimethylammonium compounds (BAC-C12)) as model pollutants. A complete removal of S2NS and BAC-C12 surfactants at 60 and 90 min, respectively, by applying 1.75 V applied potential vs RHE to the circuit, under 1 sun was achieved. An interesting competitive phenomenon for photohole utilization was observed between surfactants and adsorbed water. This led to the formation of H2O2 from water alongside surfactant degradation (anode) and hydrogen evolution (cathode). No byproducts were observed after the direct photohole mediated degradation of surfactants, implying its advantage over other AOPs and biological processes. In the cathode compartment, 82.51 μmol/cm2 and 71.81 μmol/cm2 of hydrogen gas were generated during the BAC-C12 and S2NS surfactant degradation process, respectively, at 1.75 V RHE applied potential.

A Molecular Z-Scheme Artificial Photosynthetic System Under the Bias-Free Condition for CO2 Reduction Coupled with Two-electron Water Oxidation: Photocatalytic Production of CO/HCOOH and H2 O2

Bio-inspired molecular-engineered systems have been extensively investigated for the half-reactions of H2 O oxidation or CO2 reduction with sacrificial electron donors/acceptors. However, there has yet to be reported a device for dye-sensitized molecular photoanodes coupled with molecular photocathodes in an aqueous solution without the use of sacrificial reagents. Herein, we will report the integration of SnIV - or AlIII -tetrapyridylporphyrin (SnTPyP or AlTPyP) decorated tin oxide particles (SnTPyP/SnO2 or AlTPyP/SnO2 ) photoanode with the dye-sensitized molecular photocathode on nickel oxide particles containing [Ru(diimine)3 ]2+ as the light-harvesting unit and [Ru(diimine)(CO)2 Cl2 ] as the catalyst unit covalently connected and fixed within poly-pyrrole layer (RuCAT-RuC2 -PolyPyr-PRu/NiO). The simultaneous irradiation of the two photoelectrodes with visible light resulted in H2 O2 on the anode and CO, HCOOH, and H2 on the cathode with high Faradaic efficiencies in purely aqueous conditions without any applied bias is the first example of artificial photosynthesis with only two-electron redox reactions.

Thin Zinc Oxide Layer Passivating Bismuth Vanadate for Selective Photoelectrochemical Water Oxidation to Hydrogen Peroxide

Selective photoelectrochemical (PEC) water oxidation to hydrogen peroxide is an underexplored option as opposed to the mainstream oxygen reduction reaction. Albeit interesting, selective H2 O2 production via oxidative pathway is plagued by the noncontrollable two-electron transfer reaction and the overoxidation of the thus-formed H2 O2 to O2 . Here, ZnO passivator-coated BiVO4 photoanode is reported for selective PEC H2 O2 production. Both the H2 O2 selectivity and production rate increase in the range of 1.0-2.0 V versus RHE under simulated sunlight irradiation. The photoelectrochemical impedance spectra and open-circuit potentials suggest a flattened band bending and positively shifted quasi-Fermi level of BiVO4 upon ZnO coating, facilitating H2 O2 generation and suppressing the competitive reaction of O2 evolution. The ZnO overlayer also inhibits H2 O2 decomposition, accelerates charge extraction from BiVO4 , and serves as a hole reservoir under photoexcitation. This work offers insights into surface states and the role of the coating layer in manipulating two/four-electron transfer for selective H2 O2 synthesis from PEC water oxidation.

Surface Oxygen Species in Metal Oxide Photoanodes for Solar Energy Conversion

Converting and storing solar energy directly as chemical energy through photoelectrochemical devices are promising strategies to replace fossil fuels. Metal oxides are commonly used as photoanode materials, but they still encounter challenges such as limited light absorption, inefficient charge separation, sluggish surface reactions, and insufficient stability. The regulation of surface oxygen species on metal oxide photoanodes has emerged as a critical strategy to modulate molecular and charge dynamics at the reaction interface. However, the precise role of surface oxygen species in metal oxide photoanodes remains ambiguous. The review focuses on elucidating the formation and regulation mechanisms of various surface oxygen species in metal oxides, their advantages and disadvantages in photoelectrochemical reactions, and the characterization methods employed to investigate them. Additionally, the article discusses emerging opportunities and potential hurdles in the regulation of surface oxygen species. By shedding light on the significance of surface oxygen species, this review aims to advance our understanding of their impact on metal oxide photoanodes, paving the way for the design of more efficient and stable photoelectrochemical devices.

Sunlight-Driven Generation of Hypochlorous Acid on Plasmonic Au/AgCl Catalysts in Aerated Chloride Solution

HClO is typically manufactured from Cl₂ gas generated by the electrochemical oxidation of Cl^- using considerable electrical energy with a large concomitant emission of CO₂. Therefore, renewable energy-driven HClO generation is desirable. In this study, we developed a strategy for stable HClO generation by sunlight irradiation of a plasmonic Au/AgCl photocatalyst in an aerated Cl^- solution at ambient temperature. Plasmon-activated Au particles by visible light generate hot electrons, which are consumed by O₂ reduction, and hot holes, which oxidize the lattice Cl^- of AgCl adjacent to the Au particles. The formed Cl₂ is disproportionated to afford HClO, and the removed lattice Cl^- are compensated by the Cl^- in the solution, thus promoting a catalytic HClO generation cycle. A solar-to-HClO conversion efficiency of ∼0.03% was achieved by simulated sunlight irradiation, where the resultant solution contained >38 ppm (>0.73 mM) of HClO and exhibited bactericidal and bleaching activities. The strategy based on the Cl^- oxidation/compensation cycles will pave the way for sunlight-driven clean, sustainable HClO generation.

Photocatalytic Synthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Hydrogen peroxide is a powerful and green oxidant that allows for the oxidation of a wide span of organic and inorganic substrates in liquid media under mild reaction conditions, and forms only molecular water and oxygen as end products. Hydrogen peroxide is therefore used in a wide range of applications, for which the well-documented and established anthraquinone autoxidation process is by far the dominating production method at the industrial scale. As this method is highly energy consuming and environmentally costly, the search for more sustainable synthesis methods is of high interest. To this end, the article reviews the basis and the recent development of the photocatalytic synthesis of hydrogen peroxide. Different oxygen reduction and water oxidation mechanisms are discussed, as well as several kinetic models, and the influence of the main key reaction parameters is itemized. A large range of photocatalytic materials is reviewed, with emphasis on titania-based photocatalysts and on high-prospect graphitic carbon nitride-based systems that take advantage of advanced bulk and surface synthetic approaches. Strategies for enhancing the performances of solar-driven photocatalysts are reported, and the search for new, alternative, photocatalytic materials is detailed. Finally, the promise of in situ photocatalytic synthesis of hydrogen peroxide for water treatment and organic synthesis is described, as well as its coupling with enzymes and the direct in situ synthesis of other technical peroxides.

Tailored BiVO4 Photoanode Hydrophobic Microenvironment Enables Water Oxidative H2 O2 Accumulation

Direct photoelectrochemical 2-electron water oxidation to renewable H₂ O₂ production on an anode increases the value of solar water splitting. BiVO₄ has a theoretical thermodynamic activity trend toward highly selective water oxidation H₂ O₂ formation, but the challenges of competing 4-electron O₂ evolution and H₂ O₂ decomposition reaction need to overcome. The influence of surface microenvironment has never been considered as a possible activity loss factor in the BiVO₄ -based system. Herein, it is theoretically and experimentally demonstrated that the situ confined O₂ , where coating BiVO₄ with hydrophobic polymers, can regulate the thermodynamic activity aiming for water oxidation H₂ O₂ . Also, the hydrophobicity is responsible for the H₂ O₂ production and decomposition process kinetically. Therefore, after the addition of hydrophobic polytetrafluoroethylene on BiVO₄ surface, it achieves an average Faradaic efficiency (FE) of 81.6% in a wide applied bias region (0.6-2.1 V vs RHE) with the best FE of 85%, which is 4-time higher than BiVO₄ photoanode. The accumulated H₂ O₂ concentration can reach 150 µm at 1.23 V versus RHE under AM 1.5 illumination in 2 h. This concept of modifying the catalyst surface microenvironment via stable polymers provides a new approach to tune the multiple-electrons competitive reactions in aqueous solution.

Electrochemical generation of hydrogen peroxide from a zinc gallium oxide anode with dual active sites

Electrochemical water oxidation enables the conversion of H₂O to H₂O₂. It holds distinct advantages to the O₂ reduction reaction, which is restricted by the inefficient mass transfer and limited solubility of O₂ in aqueous media. Nonetheless, most reported anodes suffer from high overpotentials (usually >1000 mV) and low selectivity. Electrolysis at high overpotentials often causes serious decomposition of peroxides and leads to declined selectivity. Herein, we report a ZnGa₂O₄ anode with dual active sites to improve the selectivity and resist the decomposition of peroxides. Its faradaic efficiency reaches 82% at 2.3 V versus RHE for H₂O₂ generation through both direct (via OH^-) and indirect (via HCO₃^-) pathways. The percarbonate is the critical species generated through the conversion of bicarbonate at Ga-Ga dual sites. The peroxy bond is stable on the surface of the ZnGa₂O₄ anode, significantly improving faradaic efficiency.

The development of cobalt phosphide co-catalysts on BiVO4 photoanodes to improve H2O2 production

Photoanodic hydrogen peroxide (H₂O₂) production via water oxidation is limited by low yields and poor selectivity. Herein, four variations of cobalt phosphides, including pristine CoP and Co₂P crystals, and two mixed-phase cobalt phosphides (CoP/Co₂P) with different ratios, were applied as co-catalysts on the BiVO₄ (BVO) photoanode to improve H₂O₂ production. The optimal yield and selectivity were approximately 9.6 µmol‧h^-1‧cm^-2 and 25.2 % at a voltage bias of 1.7 V vs reversible hydrogen electrode (V_RHE) under sunlight illumination, respectively. This performance is approximately 1.8 times that of pristine BVO photoanode. The roles of the Co and P sites were investigated. In particular, the Co site promotes the breaking of one HO bond in water to form OH^• radicals, which is the rate-determining step in H₂O₂ production. The P site plays an important role in the desorption of H₂O₂ formed from the catalyst, which is responsible for the recovery of fresh catalytic sites. Among the four samples, Co₂P exhibited the best performance for H₂O₂ production because it had the highest rate of OH^• formation owing to its improved accumulation property. This study offers a rational design strategy for co-catalysts for photoanodic H₂O₂ production.

Discovery of LaAlO3 as an efficient catalyst for two-electron water electrolysis towards hydrogen peroxide

Electrochemical two-electron water oxidation reaction (2e-WOR) has drawn significant attention as a promising process to achieve the continuous on-site production of hydrogen peroxide (H₂O₂). However, compared to the cathodic H₂O₂ generation, the anodic 2e-WOR is more challenging to establish catalysts due to the severe oxidizing environment. In this study, we combine density functional theory (DFT) calculations with experiments to discover a stable and efficient perovskite catalyst for the anodic 2e-WOR. Our theoretical screening efforts identify LaAlO₃ perovskite as a stable, active, and selective candidate for catalyzing 2e-WOR. Our experimental results verify that LaAlO₃ achieves an overpotential of 510 mV at 10 mA cm^-2 in 4 M K₂CO₃/KHCO₃, lower than those of many reported metal oxide catalysts. In addition, LaAlO₃ maintains a stable H₂O₂ Faradaic efficiency with only a 3% decrease after 3 h at 2.7 V vs. RHE. This computation-experiment synergistic approach introduces another effective direction to discover promising catalysts for the harsh anodic 2e-WOR towards H₂O₂.

Snowflake-like CdS@ZnIn2S4 heterojunction-based photocatalyst-electrolyte effect: An innovative mode for photoelectrochemical immunoassay

Exploiting innovative strategies with signal amplification in photoelectrochemical (PEC) biosensing systems to realize sensitive screening of low-abundance proteins has become one of the mainstream research orientations. Herein we reported a new strategy to amplify photocurrent signal employing a photocatalyst-electrolyte effect in alkaline media for the sensitive monitoring of prostate-specific antigen (PSA) using snowflake-liked CdS@ZnIn2S4 heterojunction as photosensitizer. In this strategy, both the band-edge position and surface redox reaction process were subtly altered by modulating the alkalinity of electrolyte. The hydroxyl anions (OH-) from NaOH could be oxidized to hydroxyl radicals (·OH) by the holes in CdS@ZnIn2S4, thus accelerating the scavenging of holes and promoting the photocurrent. Based on the above-mentioned mechanism, a sensitive split-type glucose oxidase-mediated PEC immunosensor for PSA detection was fabricated. Upon target PSA introduction, the glucose acid was generated through the sandwich-type immunoreaction to affect the alkalinity of PEC detection environment, thereby suppressing the photocurrent intensity. The CdS@ZnIn2S4-based PEC immunosensor exhibited satisfactory photocurrent responses with a good linear range of 0.04-40 ng mL-1 at a limit of detection of 14 pg mL-1. Significantly, this research not only introduces an effective strategy to detect PSA with good sensitivity and specificity, but also provides a new insight to amplify the signal by regulating the electrolyte.

Extended Conjugation Tuning Carbon Nitride for Non-sacrificial H2 O2 Photosynthesis and Hypoxic Tumor Therapy

Artificial photocatalysis offers a clean approach for producing H₂ O₂ . However, the poor selectivity and activity of H₂ O₂ production hamper traditional industrial applications and emerging photodynamic therapy (PDT)/chemodynamic therapy (CDT). Herein, we report a C₅ N₂ photocatalyst with a conjugated C=N linkage for selective and efficient non-sacrificial H₂ O₂ production in both normoxic and hypoxic systems. The strengthened delocalization of π-electrons by linkers in C₅ N₂ downshifted the band position, thermodynamically eliminating side H₂ evolution reaction and kinetically promoting water oxidation. As a result, C₅ N₂ had a competitive solar-to-chemical conversion efficiency of 0.55 % in overall H₂ O₂ production and exhibited by far the highest activity under hypoxic conditions (698 μM h^-1 ). C₅ N₂ was further applied to hypoxic PDT/CDT with outstanding performance in apparent cancer cell death and synchronous bioimaging. The study sheds light on the photosynthesis of H₂ O₂ by carbon nitrides for health applications.

Bromo- and iodo-bridged building units in metal-organic frameworks for enhanced carrier transport and CO2 photoreduction by water vapor

Organolead halide hybrids have many promising attributes for photocatalysis, e.g. tunable bandgaps and excellent carrier transport, but their instability constraints render them vulnerable to polar molecules and limit their photocatalysis in moisture. Herein, we report the construction of metal-organic frameworks based on [Pb2X]3+ (X = Br-/I-) chains as secondary building units and 2-amino-terephthalate as organic linkers, and extend their applications in photocatalytic CO2 reduction with water vapor as the reductant. Hall effect measurement and ultrafast transient absorption spectroscopy demonstrate the bromo/iodo-bridged frameworks have substantially enhanced photocarrier transport, which results in photocatalytic performances superior to conventional metal-oxo metal-organic frameworks. Moreover, in contrast to lead perovskites, the [Pb2X]3+-based frameworks have accessible porosity and high moisture stability for gas-phase photocatalytic reaction between CO2 and H2O. This work significantly advances the excellent carrier transport of lead perovskites into the field of metal-organic frameworks.

BiFeO3 photocathodes for efficient H2O2 production via charge carrier dynamics engineering

Metal oxide semiconductors are promising candidate photoelectrodes for photoelectrochemical H₂O₂ production if the issues of poor efficiency and selectivity can be resolved. An unfavorable charge transport barrier causes poor carrier collection and kinetics, limiting their efficiency and selectivity. Herein, BiFeO₃ was used as the model photocathode, and its interfacial charge transport barrier between fluorine-doped tin oxide substrates was modulated by introducing a LaNiO₃ layer as the charge collection layer. Our findings show the significantly enhanced photoelectrochemical activity of the composite photocathode with an improved photocurrent by three times (-0.9 mA cm^-2 at 0.6 V vs. RHE) and the H₂O₂ formation up to 278 μmol L^-1 with doubled faradaic efficiency. It is shown that these enhancements are due to the promoted charge carrier collection and kinetics. This work demonstrates the significant role of the charge collection layer in improving the collection and usage of photocarriers to accelerate the application of solar-to-fuel conversion.

CO2/carbonate-mediated electrochemical water oxidation to hydrogen peroxide

Electrochemical water oxidation reaction (WOR) to hydrogen peroxide (H₂O₂) via a 2e⁻ pathway provides a sustainable H₂O₂ synthetic route, but is challenged by the traditional 4e⁻ counterpart of oxygen evolution. Here we report a CO₂/carbonate mediation approach to steering the WOR pathway from 4e⁻ to 2e⁻. Using fluorine-doped tin oxide electrode in carbonate solutions, we achieved high H₂O₂ selectivity of up to 87%, and delivered unprecedented H₂O₂ partial currents of up to 1.3 A cm⁻², which represents orders of magnitude improvement compared to literature. Molecular dynamics simulations, coupled with electron paramagnetic resonance and isotope labeling experiments, suggested that carbonate mediates the WOR pathway to H₂O₂ through the formation of carbonate radical and percarbonate intermediates. The high selectivity, industrial-relevant activity, and good durability open up practical opportunities for delocalized H₂O₂ production.

Electrochemical H₂O oxidation to H₂O₂ is challenged by the competitive O₂ evolution reaction. Here, the authors report a CO₂/carbonate mediation approach to steering the H₂O oxidation pathway from O₂ evolution to H₂O₂ generation.

Binary dopant segregation enables hematite-based heterostructures for highly efficient solar H2O2 synthesis

Dopant segregation, frequently observed in ionic oxides, is useful for engineering materials and devices. However, due to the poor driving force for ion migration and/or the presence of substantial grain boundaries, dopants are mostly confined within a nanoscale region. Herein, we demonstrate that core–shell heterostructures are formed by oriented self-segregation using one-step thermal annealing of metal-doped hematite mesocrystals at relatively low temperatures in air. The sintering of highly ordered interfaces between the nanocrystal subunits inside the mesocrystal eliminates grain boundaries, leaving numerous oxygen vacancies in the bulk. This results in the efficient segregation of dopants (~90%) on the external surface, which forms their oxide overlayers. The optimized photoanode based on hematite mesocrystals with oxide overlayers containing Sn and Ti dopants realises high activity (~0.8 μmol min⁻¹ cm⁻²) and selectivity (~90%) for photoelectrochemical H₂O₂ production, which provides a wide range of application for the proposed concept.

Photoelectrochemical H₂O₂ production offers a renewable means for chemical synthesis, yet water oxidation to H₂O₂ remains a challenge. Here, authors prepare heterostructured, metal-doped hematite mesocrystals that show a high selectivity for photoelectrochemical H₂O₂ alongside H₂ production.

Carbonate-Induced Electrosynthesis of Hydrogen Peroxide via Two-Electron Water Oxidation

Electrochemical synthesis of hydrogen peroxide (H₂ O₂ ), via the two-electron water oxidation reaction (2e^- WOR), is an attractive method for the sustainable production of valuable chemicals in place of oxygen during water electrolysis. While the majority of 2e^- WOR studies have focussed on electrocatalyst design, little research has been carried out on the selection of the supporting electrolyte. In this work, we investigate the impact of potassium carbonate (K₂ CO₃ ) electrolytes, and their key properties, on H₂ O₂ production. We found that at electrolyte pH values (>9.5) where the carbonate anion (CO₃ ^2- ) was prevalent in the mixture, a 26.5 % increase in the Faraday efficiency (%FE) for H₂ O₂ production was achieved, compared to bicarbonate (HCO₃ ^- ) dominant solutions. Utilising boron-doped diamond (BDD) in highly concentrated K₂ CO₃ solutions, current densities of up to 511 mA cm^-2 (in 4 m) and %FEs of 91.5 % (in 5 m) could be attained. The results presented in this work highlight the influence of CO₃ ^2- on electrochemical H₂ O₂ generation via the 2e^- WOR and provide novel pathways to produce desirable commodities at the anode during electrochemical water splitting.

Bismuth chromate (Cr2Bi3O11): a new bismuth-based semiconductor with excellent photocatalytic activity

A novel bismuth chromate material (Cr₂Bi₃O₁₁) was synthesized by a direct mixing method with higher photocatalytic activity in both organic pollutant detoxification and oxygen evolution. Cr₂Bi₃O₁₁ with a band gap of 2.20 eV could be activated by photons with a wavelength below 561 nm. This work not only provides an approach for the controllable synthesis of Cr₂Bi₃O₁₁, but also experimentally and theoretically shows its excellence and potential when applied in photocatalysis.

Inorganic Metal-Oxide Photocatalyst for H2 O2 Production

Hydrogen peroxide (H₂ O₂ ) is a mild but versatile oxidizing agent with extensive applications in bleaching, wastewater purification, medical treatment, and chemical synthesis. The state-of-art H₂ O₂ production via anthraquinone oxidation is hardly considered a cost-efficient and environment-friendly process because it requires high energy input and generates hazardous organic wastes. Photocatalytic H₂ O₂ production is a green, sustainable, and inexpensive process which only needs water and gaseous dioxygen as the raw materials and sunlight as the power source. Inorganic metal oxide semiconductors are good candidates for photocatalytic H₂ O₂ production due to their abundance in nature, biocompatibility, exceptional stability, and low cost. Progress has been made to enhance the photocatalytic activity toward H₂ O₂ production, however, H₂ O₂ photosynthesis is still in the laboratory research phase since the productivity is far from satisfaction. To inspire innovative ideas for boosting the H₂ O₂ yield in photocatalysis, the most well-studied metal oxide photocatalysts are selected and the modification strategies to improve their activity are listed. The mechanisms for H₂ O₂ production over modified photocatalysts are discussed to highlight the facilitating role of the modification methods. Besides, methods for the quantification of H₂ O₂ and associated radical intermediates are provided to guide future studies in this field.

Insights into the carbonate effect on water oxidation over metal oxide photocatalysts/photoanodes

Photocatalytic/photoelectrochemical water splitting using metal oxide semiconductors is a promising technology for direct and simple solar-energy conversion. The addition of carbonate salts to an aqueous reaction solution has been known...

Highly efficient photosynthesis of H2O2 via two-channel pathway photocatalytic water splitting

To overcome the problems of high energy consumption, heavy pollution and unsafety in the current H2O2 production process, extensive researches have been carried out on the low-cost, green and safety...

Photoelectrochemical Conversion of Methane into Value-Added Products

Methane has been reported to be directly converted into value-added products through various methods. Among them, photoelectrochemical (PEC) methane conversion is considered an eco-friendly method because it utilizes solar light and is able to control the selectivity to different products by means of application of an external bias. Recently, some PEC methane conversion systems have been reported, but their performance efficiencies are relatively lower than those of other existing thermal, photocatalytic, and electrochemical systems. The detailed mechanism of methane activation is not clear at this stage. In this review, various catalytic materials and their roles in the reaction pathways are summarized and discussed. Furthermore, promising semiconductor materials, co-catalysts, and oxidants have also been proposed. Finally, direct and indirect pathways in the design of the PEC methane conversion system have been discussed.

Supramolecular photocatalysts fixed on the inside of the polypyrrole layer in dye sensitized molecular photocathodes: application to photocatalytic CO2 reduction coupled with water oxidation

The development of systems for photocatalytic CO2 reduction with water as a reductant and solar light as an energy source is one of the most important milestones on the way to artificial photosynthesis. Although such reduction can be performed using dye-sensitized molecular photocathodes comprising metal complexes as redox photosensitizers and catalyst units fixed on a p-type semiconductor electrode, the performance of the corresponding photoelectrochemical cells remains low, e.g., their highest incident photon-to-current conversion efficiency (IPCE) equals 1.2%. Herein, we report a novel dye-sensitized molecular photocathode for photocatalytic CO2 reduction in water featuring a polypyrrole layer, [Ru(diimine)3]2+ as a redox photosensitizer unit, and Ru(diimine)(CO)2Cl2 as the catalyst unit and reveal that the incorporation of the polypyrrole network significantly improves reactivity and durability relative to those of previously reported dye-sensitized molecular photocathodes. The irradiation of the novel photocathode with visible light under low applied bias stably induces the photocatalytic reduction of CO2 to CO and HCOOH with high faradaic efficiency and selectivity (even in aqueous solution), and the highest IPCE is determined as 4.7%. The novel photocathode is coupled with n-type semiconductor photoanodes (CoO x /BiVO4 and RhO x /TaON) to construct full cells that photocatalytically reduce CO2 using water as the reductant upon visible light irradiation as the only energy input at zero bias. The artificial Z-scheme photoelectrochemical cell with the dye-sensitized molecular photocathode achieves the highest energy conversion efficiency of 8.3 × 10-2% under the irradiation of both electrodes with visible light, while a solar to chemical conversion efficiency of 4.2 × 10-2% is achieved for a tandem-type cell using a solar light simulator (AM 1.5, 100 mW cm-2).

Boosting photocatalytic degradation of tetracycline under visible light over hierarchical carbon nitride microrods with carbon vacancies

Graphitic carbon nitride is considered as one of the promising photocatalysts for pollution elimination from wastewater. Manipulating the microstructure of carbon nitride remains a challengeable task, which is essential for improving light absorption, separating photogenerated carrier and creating reactive sites. Herein, a carbon vacancy modified hierarchical carbon nitride microrod (CN1.5) has been prepared templated from a melamine-NH₂OH·HCl complex. The hierarchical microrods are demonstrated to be comprised of interconnected nanosheets with rich carbon vacancies, which endows it with high specific surface area, enhanced light utilization efficiency, available reactive sites, improved charge carrier separation and numerous mass-transport channels. The resultant photocatalyst CN1.5 exhibits an excellent photodegradation efficiency of 87.9% towards tetracycline under visible light irradiation. The remarkable apparent rate constant of 4.91 × 10^-2 min^-1 is 7.3 times higher than that of bulk CN. In addition, the degradation pathways are deduced base on the observation of degradation intermediates generating in the photocatalytic process. Mechanism investigation indicates that the major contribution for photodegradation is attributed to ·O₂^-, ¹O₂ and H₂O₂ species. This work provides new insights into advancing carbon nitride's microstructure to improve photocatalytic degradation performance for highly efficient antibiotic removal and environment remediation.

Suppressing Water Dissociation via Control of Intrinsic Oxygen Defects for Awakening Solar H2 O-to-H2 O2 Generation

BiVO₄ theoretically has a thermodynamic activity trend toward highly selective water oxidative H₂ O₂ formation, but it is more inclined to generate O₂ in practical. The influence of intrinsic oxygen vacancy (O_vac ), especially, on surface reactivity, has never been considered as a possible activity loss mechanism in the synthetic BiVO₄ . In this work, it is theoretically and experimentally demonstrated that the intrinsic surface O_vac is responsible for lower H₂ O₂ evolution activity via promoting water dissociation to form intermediate. Through an annealing process under a V₂ O₅ rich atmosphere, the surface O_vac can be eliminated that awakens the photoelectrochemical (PEC) water oxidative H₂ O₂ activity in a NaHCO₃ electrolyte, which achieves an average of 58.4%, and increases by up to 4.28 times of the one annealed in air. This work offers a general understanding of catalytic activity loss and may be extended to other photo or electrocatalysts for catalytic selectivity regulation.

H2O2 production on a carbon cathode loaded with a nickel carbonate catalyst and on an oxide photoanode without an external bias

Efficient H₂O₂ production both on a carbon cathode modified with various metal salts and on an oxide photoanode was investigated. The cathodic current density and faradaic efficiency for H₂O₂ production (FE(H₂O₂)) on a carbon cathode in KHCO₃ aqueous solution were significantly improved by the loading of an insoluble nickel carbonate basic hydrate catalyst. This electrode was prepared by a precipitation method of nickel nitrate and KHCO₃ aqueous solution at ambient temperature. The nickel carbonate basic hydrate electrode was very stable, and the accumulated concentration of H₂O₂ was reached at 1.0 wt% at a passed charge of 2500C (the average FE(H₂O₂) was 80%). A simple photoelectrochemical system for H₂O₂ production from both the cathode and a BiVO₄/WO₃ photoanode was demonstrated without an external bias or an ion-exchange membrane in a one-compartment reactor under simulated solar light. The apparent FE(H₂O₂) from both electrodes was calculated to be 168% in total, and the production rate of H₂O₂ was approximately 0.92 μmol min^-1 cm^-2. The solar-to-chemical energy conversion efficiency for H₂O₂ production (STC_H2O2 ) without an external bias was approximately 1.75%.

Efficient Electrochemical Oxygen Reduction to Hydrogen Peroxide by Transition Metal-Doped Silicate Sr0.7Na0.3SiO3-δ

Electrochemical oxygen reduction in a selective two-electron pathway is an efficient method for onsite production of H₂O₂. State of the art noble metal-based catalysts will be prohibitive for widespread applications, and hence earth-abundant oxide-based systems are most desired. Here we report transition metal (Mn, Fe, Ni, Cu)-doped silicates, Sr_0.7Na_0.3SiO_3-δ, as potential electrocatalysts for oxygen reduction to H₂O₂ in alkaline conditions. These novel compounds are isostructural with the parent Sr_0.7Na_0.3SiO_3-δ and crystallize in monoclinic structure with corner-shared SiO₄ groups forming cyclic trimers. The presence of Na stabilizes O vacancies created on doping, and the transition metal ions provide catalytically active sites. Electrochemical parameters estimated from Tafel and Koutechy-Levich plots suggest a two-electron transfer mechanism, indicating peroxide formation. This is confirmed by the rotating ring disc electrode method, and peroxide selectivity and Faradaic efficiency are calculated to be in the range of 65-82% and 50-68%, respectively, in a potential window 0.3 to 0.6 V (vs RHE). Of all the dopants, Ni imparts the maximum selectivity and efficiency as well as highest rate of formation of H₂O₂ at 1.65 μmol s^-1.

Synthesis and characterization of Sb2O3: a stable electrocatalyst for efficient H2O2 production and accumulation and effective degradation of dyes

Sb₂O₃ films are synthesized and characterized as electrocatalysts showing efficient H₂O₂ production and accumulation properties.

Solar-to-hydrogen peroxide energy conversion on resorcinol-formaldehyde resin photocatalysts prepared by acid-catalysed polycondensation

The photocatalytic generation of hydrogen peroxide from water and dioxygen (H₂O + 1/2O₂ → H₂O₂, ΔG° = +117 kJ mol^-1) under sunlight is a promising strategy for the artificial photosynthesis of a liquid fuel. We had previously found that resorcinol-formaldehyde (RF) resin powders prepared by the base-catalysed high-temperature hydrothermal method act as semiconductor photocatalysts for H₂O₂ generation. Herein, we report that RF resins prepared by the acid-catalysed high-temperature hydrothermal method (~523 K) using common acids at pH < 4 exhibit enhanced photocatalytic activity. The base- and acid-catalysed methods both produce methylene- and methine-bridged resins consisting of π-conjugated and π-stacked benzenoid-quinoid donor-acceptor resorcinol units. The acidic conditions result in the resins with a lower bandgap (1.7 eV) and higher conductivity because the lower-degree of crosslinking creates a strongly π-stacked architecture. The irradiation of the RF-acid resins with simulated sunlight in water with atmospheric-pressure O₂ generates H₂O₂ at a solar-to-chemical conversion efficiency of 0.7%, which is the highest efficiency ever reported for powder catalysts used in artificial photosynthesis.