Whole-cell microtiter plate screening assay for terminal hydroxylation of fatty acids by P450s

Improved Bioproduction of the Nylon 12 Monomer by Combining the Directed Evolution of P450 and Enhancing Heme Synthesis

The nylon 12 (PA12) monomer ω-aminododecanoic acid (ω-AmDDA) could be synthesized from lauric acid (DDA) through multi-enzyme cascade transformation using engineered E. coli, with the P450 catalyzing terminal hydroxylation of DDA as a rate-limiting enzyme. Its activity is jointly determined by the heme domain and the reductase domain. To obtain a P450 mutant with higher activity, directed evolution was conducted using a colorimetric high-throughput screening (HTS) system with DDA as the real substrate. After two rounds of directed evolution, a positive double-site mutant (R14R/D629G) with 90.3% higher activity was obtained. Molecular docking analysis, kinetic parameter determination and protein electrophoresis suggested the improved soluble expression of P450 resulting from the synonymous mutation near the N-terminus and the shortened distance of the electron transfer between FMN and FAD caused by D629G mutation as the major reasons for activity improvement. The significantly increased k_cat and unchanged K_m provided further evidence for the increase in electron transfer efficiency. Considering the important role of heme in P450, its supply was strengthened by the metabolic engineering of the heme synthesis pathway. By combining P450-directed evolution and enhancing heme synthesis, 2.02 ± 0.03 g/L of ω-AmDDA was produced from 10 mM DDA, with a yield of 93.6%.

Carboxylic Acid Directed γ-Lactonization of Unactivated Primary C-H Bonds Catalyzed by Mn Complexes: Application to Stereoselective Natural Product Diversification

Reactions that enable selective functionalization of strong aliphatic C-H bonds open new synthetic paths to rapidly increase molecular complexity and expand chemical space. Particularly valuable are reactions where site-selectivity can be directed toward a specific C-H bond by catalyst control. Herein we describe the catalytic site- and stereoselective γ-lactonization of unactivated primary C-H bonds in carboxylic acid substrates. The system relies on a chiral Mn catalyst that activates aqueous hydrogen peroxide to promote intramolecular lactonization under mild conditions, via carboxylate binding to the metal center. The system exhibits high site-selectivity and enables the oxidation of unactivated primary γ-C-H bonds even in the presence of intrinsically weaker and a priori more reactive secondary and tertiary ones at α- and β-carbons. With substrates bearing nonequivalent γ-C-H bonds, the factors governing site-selectivity have been uncovered. Most remarkably, by manipulating the absolute chirality of the catalyst, γ-lactonization at methyl groups in gem-dimethyl structural units of rigid cyclic and bicyclic carboxylic acids can be achieved with unprecedented levels of diastereoselectivity. Such control has been successfully exploited in the late-stage lactonization of natural products such as camphoric, camphanic, ketopinic, and isoketopinic acids. DFT analysis points toward a rebound type mechanism initiated by intramolecular 1,7-HAT from a primary γ-C-H bond of the bound substrate to a highly reactive Mn^IV-oxyl intermediate, to deliver a carbon radical that rapidly lactonizes through carboxylate transfer. Intramolecular kinetic deuterium isotope effect and ¹⁸O labeling experiments provide strong support to this mechanistic picture.

Biomacromolecule-Assisted Screening for Reaction Discovery and Catalyst Optimization

Reaction discovery and catalyst screening lie at the heart of synthetic organic chemistry. While there are efforts at de novo catalyst design using computation/artificial intelligence, at its core, synthetic chemistry is an experimental science. This review overviews biomacromolecule-assisted screening methods and the follow-on elaboration of chemistry so discovered. All three types of biomacromolecules discussed─enzymes, antibodies, and nucleic acids─have been used as "sensors" to provide a readout on product chirality exploiting their native chirality. Enzymatic sensing methods yield both UV-spectrophotometric and visible, colorimetric readouts. Antibody sensors provide direct fluorescent readout upon analyte binding in some cases or provide for cat-ELISA (Enzyme-Linked ImmunoSorbent Assay)-type readouts. DNA biomacromolecule-assisted screening allows for templation to facilitate reaction discovery, driving bimolecular reactions into a pseudo-unimolecular format. In addition, the ability to use DNA-encoded libraries permits the barcoding of reactants. All three types of biomacromolecule-based screens afford high sensitivity and selectivity. Among the chemical transformations discovered by enzymatic screening methods are the first Ni(0)-mediated asymmetric allylic amination and a new thiocyanopalladation/carbocyclization transformation in which both C-SCN and C-C bonds are fashioned sequentially. Cat-ELISA screening has identified new classes of sydnone-alkyne cycloadditions, and DNA-encoded screening has been exploited to uncover interesting oxidative Pd-mediated amido-alkyne/alkene coupling reactions.

Whole-cell screening of oxidative enzymes using genetically encoded sensors

Biocatalysis is increasingly used for synthetic purposes in the chemical and especially the pharmaceutical industry. Enzyme discovery and optimization which is frequently needed to improve biocatalytic performance rely on high-throughput methods for activity determination. These methods should ideally be generic and applicable to entire enzyme families. Hydrogen peroxide (H2O2) is a product of several biocatalytic oxidations and its formation can serve as a proxy for oxidative activity. We designed a genetically encoded sensor for activity measurement of oxidative biocatalysts via the amount of intracellularly-formed H2O2. A key component of the sensor is an H2O2-sensitive transcriptional regulator, OxyR, which is used to control the expression levels of fluorescent proteins. We employed the OxyR sensor to monitor the oxidation of glycerol to glyceraldehyde and of toluene to o-cresol catalysed by recombinant E. coli expressing an alcohol oxidase and a P450 monooxygenase, respectively. In case of the P450 BM3-catalysed reaction, we additionally monitored o-cresol formation via a second genetically encoded sensor based on the phenol-sensitive transcriptional activator, DmpR, and an orthogonal fluorescent reporter protein. Single round screens of mutant libraries by flow cytometry or by visual inspection of colonies on agar plates yielded significantly improved oxidase and oxygenase variants thus exemplifying the suitability of the sensor system to accurately assess whole-cell oxidations in a high-throughput manner.

A Structural Model of a P450-Ferredoxin Complex from Orientation-Selective Double Electron-Electron Resonance Spectroscopy

Cytochrome P450 (CYP) monooxygenases catalyze the oxidation of chemically inert carbon-hydrogen bonds in diverse endogenous and exogenous organic compounds by atmospheric oxygen. This C-H bond oxy-functionalization activity has huge potential in biotechnological applications. Class I CYPs receive the two electrons required for oxygen activation from NAD(P)H via a ferredoxin reductase and ferredoxin. The interaction of Class I CYPs with their cognate ferredoxin is specific. In order to reconstitute the activity of diverse CYPs, structural characterization of CYP-ferredoxin complexes is necessary, but little structural information is available. Here we report a structural model of such a complex (CYP199A2-HaPux) in frozen solution derived from distance and orientation restraints gathered by the EPR technique of orientation-selective double electron-electron resonance (os-DEER). The long-lived oscillations in the os-DEER spectra were well modeled by a single orientation of the CYP199A2-HaPux complex. The structure is different from the two known Class I CYP-Fdx structures: CYP11A1-Adx and CYP101A1-Pdx. At the protein interface, HaPux residues in the [Fe₂S₂] cluster-binding loop and the α3 helix and the C-terminus residue interact with CYP199A2 residues in the proximal loop and the C helix. These residue contacts are consistent with biochemical data on CYP199A2-ferredoxin binding and electron transfer. Electron-tunneling calculations indicate an efficient electron-transfer pathway from the [Fe₂S₂] cluster to the heme. This new structural model of a CYP-Fdx complex provides the basis for tailoring CYP enzymes for which the cognate ferredoxin is not known, to accept electrons from HaPux and display monooxygenase activity.

Recent advances in enzymatic oxidation of alcohols

Enzymatic alcohol oxidation plays an important role in chemical synthesis. In the past two years, new alcohol oxidation enzymes were developed through genome-mining and protein engineering, such as new copper radical oxidases with broad substrate scope, alcohol dehydrogenases with altered cofactor preference and a flavin-dependent alcohol oxidase with enhanced oxygen coupling. New cofactor recycling methods were reported for alcohol dehydrogenase-catalyzed oxidation with photocatalyst and coupled glutaredoxin-glutathione reductase as promising examples. Different alcohol oxidation systems were used for the oxidation of primary and secondary alcohols, especially in the cascade conversion of alcohols to lactones, lactams, chiral amines, chiral alcohols and hydroxyketones. Among them, biocatalyst with low enantioselectivity demonstrated an interesting feature for complete conversion of racemic secondary alcohols through non-enantioselective oxidation.

Microbial production of ketoreductases: Development of a novel high-throughput screening method

An assay method for detection of enantiospecific chiral alcohol was developed based on ketoreductase, enantio-selective alcohol oxidase and 2,4-dinitrophenyl hydrazine (DNPH) reagent. The assay method was developed to check the conversion of 1-Acetonapthone to either (S) or (R) specific 1-(1-napthyl) ethanol or its racemic mixture using ketoreductases. Further, estimation was done with the help of 2,4-DNPH method. The resulting orange coloured chromogen showed a maximum absorbance at 560nm. The assay was performed in 96 well microtiter plates and had a linear detection range from 0.05mM to 4mM. The method is found to be suitable for the detection of large numbers of crude samples and screening of ketoreductase producing strains in high-throughput manner.