Reactions in ultra-small droplets by tip-assisted chemistry

Microdroplet mass spectrometry: Accelerating reaction and application

Electrospray ionization (ESI) and desorption electrospray ionization (DESI) are common soft ionization method of mass spectrometry (MS). However, recent studies revealed that some chemical reactions can be induced or greatly accelerated in the sprayed microdroplets compared to the same reaction in the bulk. These open a new area in using microdroplet MS to explore new chemistry and develop new applications. This minireview will introduce microdroplet chemistries and explore various microdroplet techniques most of which are ESI- or DESI-based extensions by incorporating transfer tube, supersonic nebulizing gas, droplet fusion, spray extraction, laser irradiation, or laser ablation for online/offline MS analysis. Potential applications associated with new techniques, including real-time reaction monitoring, high-throughput reaction screening, protein identification, and protein characterization, are also described. Future outlook, such as coupling microdroplet MS with separation techniques, is proposed and discussed.

Microfluidics for Drug Development: From Synthesis to Evaluation

Drug development is a long process whose main content includes drug synthesis, drug delivery, and drug evaluation. Compared with conventional drug development procedures, microfluidics has emerged as a revolutionary technology in that it offers a miniaturized and highly controllable environment for bio(chemical) reactions to take place. It is also compatible with analytical strategies to implement integrated and high-throughput screening and evaluations. In this review, we provide a comprehensive summary of the entire microfluidics-based drug development system, from drug synthesis to drug evaluation. The challenges in the current status and the prospects for future development are also discussed. We believe that this review will promote communications throughout diversified scientific and engineering communities that will continue contributing to this burgeoning field.

Resonance in Chirogenesis and Photochirogenesis: Colloidal Polymers Meet Chiral Optofluidics

Metastable colloids made of crystalline and/or non-crystalline matters render abilities of photonic resonators susceptible to chiral chemical and circularly polarized light sources. By assuming that μm-size colloids and co-colloids consisting of π- and/or σ-conjugated polymers dispersed into an optofluidic medium are artificial models of open-flow, non-equilibrium coacervates, we showcase experimentally resonance effects in chirogenesis and photochirogenesis, revealed by gigantic boosted chiroptical signals as circular dichroism (CD), optical rotation dispersion, circularly polarized luminescence (CPL), and CPL excitation (CPLE) spectral datasets. The resonance in chirogenesis occurs at very specific refractive indices (RIs) of the surrounding medium. The chirogenesis is susceptible to the nature of the optically active optofluidic medium. Moreover, upon an excitation-wavelength-dependent circularly polarized (CP) light source, a fully controlled absolute photochirogenesis, which includes all chiroptical generation, inversion, erase, switching, and short-/long-lived memories, is possible when the colloidal non-photochromic and photochromic polymers are dispersed in an achiral optofluidic medium with a tuned RI. The hand of the CP light source is not a determining factor for the product chirality. These results are associated with my experience concerning amphiphilic polymerizable colloids, in which, four decades ago, allowed proposing a perspective that colloids are connectable to light, polymers, helix, coacervates, and panspermia hypotheses, nuclear physics, biology, radioisotopes, homochirality question, first life, and cosmology.

Accurate generation of attolitre droplets for directly printing gold nanoparticles from solution through confined reaction

Small droplets exist in nature widely and have attractive applications. Although there are some well-established techniques to produce small droplets, it is still a substantial challenge to generate and measure the volume of ultrafine droplets down to attolitres (aL) precisely. Here, we accurately generate ultrafine droplets in attolitre scale by an electrohydrodynamic jet method. By superimposing a low frequency pulse over a static electric field, the volumes of the ultrafine droplets are accurately controlled from 1 to 5 aL with the best accuracy of 0.3 aL and coefficient of variations less than 25%. Gold nanoparticles are deposited on substrate directly from the ultrafine droplets of HAuCl4/H2O solution through a confined reaction in a reducing environment. The gold nanoparticles exhibit highly sensitive and reproductive in surface-enhanced Raman scattering.

Accelerated Formation of H2 Nanobubbles from a Surface Nanodroplet Reaction

The compartmentalization of chemical reactions within droplets has advantages in low costs, reduced consumption of reagents, and increased throughput. Reactions in small droplets have also been shown to greatly accelerate the rate of many chemical reactions. The accelerated growth rate of nanobubbles from nanodroplet reactions is demonstrated in this work. The gaseous products from the reaction at the nanodroplet surface promoted nucleation of hydrogen nanobubbles within multiple organic liquid nanodroplets. The nanobubbles were confined within the droplets and selectively grew and collapsed at the droplet perimeter, as visualized by microscopy with high spatial and temporal resolutions. The growth rate of the bubbles was significantly accelerated within small droplets and scaled inversely with droplet radius. The acceleration was attributed to confinement from the droplet volume and effect from the surface area on the interfacial chemical reaction for gas production. The results of this study provide further understanding for applications in droplet enhanced production of nanobubbles and the on-demand liberation of hydrogen.

Speeding up biphasic reactions with surface nanodroplets

Biphasic chemical reactions compartmentalized in small droplets offer advantages, such as streamlined procedures for chemical analysis, enhanced chemical reaction efficiency and high specificity of conversion. In this work, we experimentally and theoretically investigate the rate for biphasic chemical reactions between acidic nanodroplets on a substrate surface and basic reactants in a surrounding bulk flow. The reaction rate is measured by droplet shrinkage as the product is removed from the droplets by the flow. In our experiments, we determine the dependence of the reaction rate on the flow rate and the solution concentration. The theoretical analysis predicts that the life time τ of the droplets scales with Peclet number Pe and the reactant concentration in the bulk flow c_re,bulk as τ∝ Pe^-3/2c_re,bulk^-1, in good agreement with our experimental results. Furthermore, we found that the product from the reaction on an upstream surface can postpone the droplet reaction on a downstream surface, possibly due to the adsorption of interface-active products on the droplets in the downstream. The time of the delay decreases with increasing Pe of the flow and also with increasing reactant concentration in the flow, following the scaling same as that of the reaction rate with these two parameters. Our findings provide insight for the ultimate aim to enhance droplet reactions under flow conditions.

Droplet Imbibition Enables Nonequilibrium Interfacial Reactions in Charged Microdroplets

A droplet imbibition experiment is proposed to study interfacial effects, which appears to be the main factor influencing reaction acceleration in charged microdroplets produced by electrospray ionization (ESI). One reagent is deposited onto the surface of rapidly moving microdroplets containing the second reagent to be reacted. In this manner, reactions are hindered from reaching equilibrium and monitored in real time by mass spectrometry. We demonstrated this phenomenon using Katritzky chemistry, which is known to proceed either by the solvent-stabilized 2H-pyran intermediate or via the surface-active pseudobase intermediate. Comparisons with reactions performed using ESI show obvious surface effects in favor of the droplet imbibition experiment. By keeping reactant mole ratio constant, it was demonstrated that similar interfacial effects observed in the droplet imbibition experiment can be reached by allowing ESI microdroplets containing premixed reagents to traverse a distance >16 mm. At such spray distance, molecular diffusion and droplet lifetime become comparable allowing reactants to be enriched at droplet surface. Reactions were also conducted in rapid mixing, theta capillary-based droplets, which showed markedly reduced yields compared with the interfacial droplet imbibition experiment.

Scale-up of microdroplet reactions by heated ultrasonic nebulization

Dramatically higher rates for a variety of chemical reactions have been reported in microdroplets compared with those in the liquid bulk phase. However, the scale-up of microdroplet chemical synthesis has remained a major challenge to the practical application of microdroplet chemistry. Heated ultrasonic nebulization (HUN) was found as a new way for scaling up chemical synthesis in microdroplets. Four reactions were examined, a base-catalyzed Claisen-Schmidt condensation, an oximation reaction from a ketone, a two-phase oxidation reaction without the use of a phase-transfer-catalyst, and an Eschenmoser coupling reaction. These reactions show acceleration of one to three orders of magnitude (122, 23, 6536, and 62) in HUN microdroplets compared to the same reactions in bulk solution. Then, using the present method, the scale-up of the reactions was achieved at an isolated rate of 19 mg min-1 for the product of the Claisen-Schmidt condensation, 21 mg min-1 for the synthesis of benzophenone oxime from benzophenone, 31 mg min-1 for the synthesis of 4-methoxybenzaldehyde from 4-methoxybenzyl alcohol, and 40 mg min-1 for the enaminone product of the Eschenmoser coupling reaction.

Combinatorial Synthesis of Macromolecular Arrays by Microchannel Cantilever Spotting (µCS)

Surface-bound microarrays of multiple oligo- and macromolecules (e.g., peptides, DNA) offer versatile options in biomedical applications like drug screening, DNA analysis, or medical diagnostics. Combinatorial syntheses of these molecules in situ can save significant resources in regard to processing time and material use. Furthermore, high feature densities are needed to enable high-throughput and low sample volumes as generally regarded in combinatorial chemistry. Here, a scanning-probe-lithography-based approach for the combinatorial in situ synthesis of macromolecules is presented in microarray format. Feature sizes below 40 µm allow for the creation of high-density arrays with feature densities of 62 500 features per cm² . To demonstrate feasibility of this approach for biomedical applications, a multiplexed array of functional protein tags (HA- and FLAG-tag) is synthesized, and selective binding of respective epitope recognizing antibodies is shown. This approach uses only small amounts of base chemicals for synthesis and can be further parallelized, therefore, opening up a route to flexible, highly dense, and cost-effective microarrays.

Fluorescence Polarization Anisotropy in Microdroplets

Chemical reactions can be greatly accelerated in microdroplets, but the factors that lead to acceleration are still being elucidated. Using rhodamine 6G (R6G) as a model compound, we studied the density distribution and fluorescence polarization anisotropy of this dye in water-in-oil microdroplets. We found the density of R6G is higher on the surface of the microdroplets, and the ratio of the surface density to that of the center grows with increasing microdroplet radius or with decreasing R6G concentration. The measured fluorescence polarization anisotropy at the surface is almost the same for droplets of different sizes but becomes larger when the concentration is lowered. We also performed three-dimensional simulations by treating R6G⁺ and its associated anion as a dipole of fixed length and magnitude. The simulation results match quite well the experimental measurements, showing that the density distribution and fluorescence polarization anisotropy can be largely explained by a simple electrostatic model.

When lithography meets self-assembly: a review of recent advances in the directed assembly of complex metal nanostructures on planar and textured surfaces

One of the foremost challenges in nanofabrication is the establishment of a processing science that integrates wafer-based materials, techniques, and devices with the extraordinary physicochemical properties accessible when materials are reduced to nanoscale dimensions. Such a merger would allow for exacting controls on nanostructure positioning, promote cooperative phenomenon between adjacent nanostructures and/or substrate materials, and allow for electrical contact to individual or groups of nanostructures. With neither self-assembly nor top-down lithographic processes being able to adequately meet this challenge, advancements have often relied on a hybrid strategy that utilizes lithographically-defined features to direct the assembly of nanostructures into organized patterns. While these so-called directed assembly techniques have proven viable, much of this effort has focused on the assembly of periodic arrays of spherical or near-spherical nanostructures comprised of a single element. Work directed toward the fabrication of more complex nanostructures, while still at a nascent stage, has nevertheless demonstrated the possibility of forming arrays of nanocubes, nanorods, nanoprisms, nanoshells, nanocages, nanoframes, core-shell structures, Janus structures, and various alloys on the substrate surface. In this topical review, we describe the progress made in the directed assembly of periodic arrays of these complex metal nanostructures on planar and textured substrates. The review is divided into three broad strategies reliant on: (i) the deterministic positioning of colloidal structures, (ii) the reorganization of deposited metal films at elevated temperatures, and (iii) liquid-phase chemistry practiced directly on the substrate surface. These strategies collectively utilize a broad range of techniques including capillary assembly, microcontact printing, chemical surface modulation, templated dewetting, nanoimprint lithography, and dip-pen nanolithography and employ a wide scope of chemical processes including redox reactions, alloying, dealloying, phase separation, galvanic replacement, preferential etching, template-mediated reactions, and facet-selective capping agents. Taken together, they highlight the diverse toolset available when fabricating organized surfaces of substrate-supported nanostructures.