Self-indicating polymers: a pathway to intelligent materials

Self-indicating polymers have emerged as a promising class of smart materials that possess the unique ability to undergo detectable variations in their physical or chemical properties in response to various stimuli. This article presents an overview of the most important mechanisms through which these materials exhibit self-indication, including aggregation, phase transition, covalent and non-covalent bond cleavage, isomerization, charge transfer, and energy transfer. Aggregation is a prevalent mechanism observed in self-indicating polymers, where changes in the degree of molecular organization result in variations in optical or electrical properties. Phase transition-induced self-indication relies on the transformation between different phases, such as liquid-to-solid or crystalline-to-amorphous transitions, leading to observable changes in color or conductivity. Covalent bond cleavage-based self-indicating polymers undergo controlled degradation or fragmentation upon exposure to specific triggers, resulting in noticeable variations in their structural or mechanical properties. Isomerization is another crucial mechanism exploited in self-indicating polymers, where the reversible transformation between the different isomeric forms induces detectable changes in fluorescence or absorption spectra. Charge transfer-based self-indicating polymers rely on the modulation of electron or hole transfer within the polymer backbone, manifesting as changes in electrical conductivity or redox properties. Energy transfer is an essential mechanism utilized by certain self-indicating polymers, where energy transfer between chromophores or fluorophores leads to variations in the emission characteristics. Furthermore, this review article highlights the diverse range of applications for self-indicating polymers. These materials find particular use in sensing and monitoring applications, where their responsive nature enables them to act as sensors for specific analytes, environmental parameters, or mechanical stress. Self-indicating polymers have also been used in the development of smart materials, including stimuli-responsive coatings, drug delivery systems, food sensors, wearable devices, and molecular switches. The unique combination of tunable properties and responsiveness makes self-indicating polymers highly promising for future advancements in the fields of biotechnology, materials science, and electronics.

Mechanochemical synthesis of an AIE-TICT-ESIPT active orange-emissive chemodosimeter for selective detection of hydrogen peroxide in aqueous media and living cells, and solid-phase quantitation using a smartphone

We report herein the design and mechanochemical synthesis of a chemodosimeter, benzothiazole-derived unsymmetrical azine protected by 4-bromomethylphenylboronic acid (BTPAB), an orange aggregation-induced emission (AIE), for the selective detection of H2O2 in a turn-on manner.

Water-soluble AIE-active fluorescent organic nanoparticles for ratiometric detection of SO2 in mitochondria of living cells

We report a water-soluble AIEgen (TYDL) to be self-assembled into fluorescent organic nanoparticles (TYDLs) for specific sensing of SO2 in living hepatoma cells. It is demonstrated that TYDLs were suitable...

Microalgae-Derived Health Supplements to Therapeutic Shifts: Redox-Based Study Opportunities with AIE-Based Technologies

Reactive oxygen species (ROS) are highly reactive molecules, serve the normal signaling in different cell types. Targeting ROS as the chemical signals, different stress based strategies have been developed to synthesis different anti-inflammatory molecules in microalgae. These molecules could be utilized as health supplements in human. To provoke the ROS-mediated defence systems, their connotation with the associated conditions must be well understood, therefore, proper tools for studying ROS in natural state are essential. The in vivo detection of ROS with phosphorescent probes offers promising opportunities to study these molecules in a non-invasive manner. Most of the common problems in the traditional fluorescent probes are lower photostability, excitation intensity, slow responsiveness, and the microenvironment that challenge their performance. Some ROS-specific aggregationinduced emission luminogens (AIEgens) with pronounced spatial and temporal resolution have recently demonstrated high selectivity, rapid responsiveness, and efficacies to resolve the aggregation-caused quenching issues. The nanocomposites of some AIE-photosensitizers can also improve the ROS-mediated photodynamic therapy. These AIEgens could be used to induce bioactive components in microalgae through altering the ROS signaling, therefore are more auspicious for biomedical research. This study reviews the prospects of AIEgen-based technologies to understand the ROS mediated bio-physiological processes in microalgae for better healthcare benefits.

Water-soluble AIE-active Fluorescent Organic Nanoparticles: Design, Preparation and Application for Specific Detection of Cyanide in Water and Food Samples

A dilactosyl-dicyanovinyl-functionalized tetraphenylethene (TPELC) was designed, synthesized and used for ratiometric sensing of cyanide. TPELC was comprised of three moieties (tetraphenylethylene, dicyanovinyl group and lactose unit) in one molecule, making TPELC water-soluble and aggregation-induced emission (AIE)-active and selectively reactive to cyanide. Compared with other reported fluorescent probes containing dicyanovinyl group, TPELC is the first AIE luminogen to be assembled as fluorescent organic nanoparticles (FONs) for sensing of cyanide in water without the use of surfactant or the help of organic solvents based on the nucleophilic addition reaction. The detection mechanism was verified by liquid chromatograph mass spectrometry experiments and by protonation of cyanide to reduce the nucleophilicity of cyanide. In addition, TPELC was used for detection of the cyanide content of food samples and test strips were developed to simplify the detection procedure.

Fluorogenic Biosensors Constructed via Aggregation-Induced Emission based on Enzyme-Catalyzed Coupling Reactions for Detection of Hydrogen Peroxide

Hydrogen peroxide (H2O2) is a main reactive oxygen by-product produced in the metabolism of organisms and a common biomarker of oxidative stress. Aggregation-induced emission (AIE) probes for H2O2 have been proposed. Such AIEgens mostly use benzeneboronic acid as a recognition group. Recently, a strategy involving enzyme-catalyzed polymerization of AIE compounds shows great potential in AIEgens design. We herein modify the AIE motif, tetraphenylethene (TPE) with o-phenylenediamine (TPE-TAF), which can be oxidated by H2O2 in HRP to form an intramolecular phenazine structure. Compared with a similar approach, the proposed strategy is simple and the TPE-TAF showed a sensitive "turn-on" fluorescence with H2O2. The detection limit (LOD) is 3.39 μM and the probe is highly specific against H2O2. We further verified the reaction mechanism of the enzyme-catalyzed coupling reaction. The probe is a promising candidate as a stable and safe fluorescent substrate in H2O2 sensing.

Assembly of Water-soluble AIE-active Fluorescent Organic Nanoparticles for Ratiometric Detection of Hypochlorite in Living Cells

Hypochlorous acid (HOCl) plays a crucial role in many physiological processes and is widely used as bleach, deodorant and fungicide. In this work, we designed an amphiphilic hydrazone fluorescent molecule THG-1 containing hydrophilic sugar units and hydrophobic tetraphenylethylene unit for ratiometric detection of HOCl with high sensitivity and excellent selectivity based on HOCl-triggered hydrolyzation reaction and aggregation-induced emission (AIE) effect. The detection mechanism was verified by liquid chromatograph mass spectrometry experiments and scanning electron microscope (SEM) tests. Contrast experiments revealed that the numbers of lactose unit and hydrazone linker were essential for assembly of THG-1 and detection of HOCl. In addition, THG-1 was successfully used for imaging of exogenous and endogenous HOCl in living cells.

Boronate-Based Probes for Biological Oxidants: A Novel Class of Molecular Tools for Redox Biology

Boronate-based molecular probes are emerging as one of the most effective tools for detection and quantitation of peroxynitrite and hydroperoxides. This review discusses the chemical reactivity of boronate compounds in the context of their use for detection of biological oxidants, and presents examples of the practical use of those probes in selected chemical, enzymatic, and biological systems. The particular reactivity of boronates toward nucleophilic oxidants makes them a distinct class of probes for redox biology studies. We focus on the recent progress in the design and application of boronate-based probes in redox studies and perspectives for further developments.

Room-Temperature Phosphorescence-active Boronate Particles: Characterization and Ratiometric Afterglow-sensing Behavior by Surface Grafting of Rhodamine B

We found that boronate particles (BP), as a self-assembled system prepared by sequential dehydration of benzene-1,4-diboronic acid with pentaerythritol, showed greenish room-temperature phosphorescence (RTP). This emission was observed in both solid and dispersion state in water. To understand the RTP properties, X-ray crystallographic analysis, and density functional theory (DFT) and time-dependent DFT at M06-2X/6-31G(d,p) level were performed using 3,9-dibenzo-2,4,8,10-tetraoxa-3,9-diboraspiro[5.5]undecane (1) as a model compound. Our interest in functionalizing the RTP-active particles led us to graft Rhodamine B onto their surface. The resulting system emitted a dual afterglow via a Förster-type resonance energy transfer process from the BP in the excited triplet state to Rhodamine B acting as an acceptor fluorophore. This emission behavior was used for ratiometric afterglow sensing of water content in THF with a detection limit of 0.28 %, indicating that this study could pave the way for a new strategy for developing color-variable afterglow chemosensors for various analytes.

Aggregation-induced emission luminogens for RONS sensing

The development of AIE bioprobes for RONS sensing in living systems is now summarized. We discuss some representative examples of AIEgen based bioprobes in terms of their molecular design, sensing mechanism and sensitive sensing in vitro and in vivo.

Rapid-Response and Highly Sensitive Boronate Derivative-Based Fluorescence Probe for Detecting H2O2 in Living Cells

Intracellular H2O2 monitoring is important and has driven researchers to pursue advancements for the rapid identification of H2O2, since H2O2 is short-lived in cell lines. An arylboronate derivative has been investigated as a chemospecific fluorescence recognition agent for H2O2. Triphenylimidazoleoxadiazolephenyl (TPIOP) boronate was contrived as a novel candidate for the rapid and sensitive recognition of H2O2. The probe was conjugated using the TPIOP functional group acting as an excellent fluorescent enhancer. The TPIOP group stimulated the polarization of C-B bond due to its extended π-conjugation, which included heteroatoms, and induced the production of rapid signal because of the highly polar C-B bond along with the corresponding boronate unit. While H2O2 reacts with TPIOP boronate, its nucleophilic addition to the boron generates a charged tetrahedral boronate complex, and then the C-B bond migrates toward one of the electrophilic peroxide oxygen atoms. The resulting boronate ester is then hydrolyzed by water into a phenol, which significantly enhances fluorescence through aggregation-induced emission. The TPIOP boronate probe responded to H2O2 rapidly, within 2 min, and exhibited high sensitivity with a limit of detection of 8 nM and a 1000-fold selectivity in the presence of other reactive oxygen species. Therefore, the developed TPIOP boronate chemodosimeter was successfully utilized to visualize and quantify intracellular H2O2 from human breast cancer (MCF-7) cells, as well as gaseous and aqueous H2O2 from environmental samples using Whatman paper strips coated with TPIOP boronate.

A tetravalent sialic acid-coated tetraphenylethene luminogen with aggregation-induced emission characteristics: design, synthesis and application for sialidase activity assay, high-throughput screening of sialidase inhibitors and diagnosis of bacterial vaginosis

We report a turn-on tetravalent sialic acid-coated tetraphenylethene luminogen (TPE4S) with excellent hydrophilicity, good stability, high sensitivity and unique selectivity towards sialidases, and the maximum fluorescence enhancement was ∼40 fold. More importantly, TPE4S was successfully utilized for the screening of sialidase inhibitors and diagnosis of bacterial vaginosis.

Challenges and Opportunities for Small-Molecule Fluorescent Probes in Redox Biology Applications

SIGNIFICANCE

The concentrations of reactive oxygen/nitrogen species (ROS/RNS) are critical to various biochemical processes. Small-molecule fluorescent probes have been widely used to detect and/or quantify ROS/RNS in many redox biology studies and serve as an important complementary to protein-based sensors with unique applications. Recent Advances: New sensing reactions have emerged in probe development, allowing more selective and quantitative detection of ROS/RNS, especially in live cells. Improvements have been made in sensing reactions, fluorophores, and bioavailability of probe molecules.

CRITICAL ISSUES

In this review, we will not only summarize redox-related small-molecule fluorescent probes but also lay out the challenges of designing probes to help redox biologists independently evaluate the quality of reported small-molecule fluorescent probes, especially in the chemistry literature. We specifically highlight the advantages of reversibility in sensing reactions and its applications in ratiometric probe design for quantitative measurements in living cells. In addition, we compare the advantages and disadvantages of small-molecule probes and protein-based probes.

FUTURE DIRECTIONS

The low physiological relevant concentrations of most ROS/RNS call for new sensing reactions with better selectivity, kinetics, and reversibility; fluorophores with high quantum yield, wide wavelength coverage, and Stokes shifts; and structural design with good aqueous solubility, membrane permeability, low protein interference, and organelle specificity. Antioxid. Redox Signal. 29, 518-540.

A highly selective TPE-based AIE fluorescent probe is developed for the detection of Ag+

The detection of Ag⁺ in the environment is very important to determine the level of pollution from silver complexes, which have caused various human health problems. Herein, an aggregation-induced emission (AIE) chromophore (tetraphenylethane, TPE) attached to a benzimidazole group (tetra-benzimidazole, TBI–TPE) is synthesized and utilized to detect Ag⁺ in the environment. The strong chelating effect between the benzimidazole group and Ag⁺ leads to the formation of aggregates, and strong yellow fluorescence signals were observed after adding Ag⁺ into a TBI–TPE solution. The stoichiometry of the complex of TBI–TPE and Ag⁺ was established to be 1 : 2 using photochemical and mass spectra measurements. The detection limit of the Ag⁺ assay is 90 nM with a linear range from 100 nM to 6 μM. This study provides a facile method to determine Ag⁺ in real environmental samples with satisfactory results.

We develop a highly selective TPE-based AIE fluorescent probe containing a benzimidazole group for the detection of Ag⁺.

para-Hydroxy Thiophenol-Coated CdSe/ZnS Quantum Dots as a Turn-On Fluorescent Probe for H2O2 Detection in Aqueous Media

Since hydrogen peroxide plays an important role in various fields, a facile, simple, highly selective, and stable analytic method for H2O2 is desirable. Semiconductor quantum dots (QDs) have acted as a potential alternative for organic fluorophores in fluorescence analytical fields due to their superior optical properties. Herein, we report hydrophilic p-hydroxy thiophenol (p-HTP) coated CdSe/ZnS QDs (denoted as p-HTP-QDs) acting as a selective fluorescence ‘turn-on’ probe for H2O2 in aqueous media. The obtained p-HTP-QD probe exhibits weak fluorescence, which stems from hole transfer from the QDs to p-HTP. The presence of H2O2 induces an oxidative structural transformation of p-HTP in p-HTP-QDs from a phenol structure to an α-hydroxy ketone derivative, which extremely reduces the driving force for hole transfer. Thus, the QDs photoluminescence (PL) was re-switched on. Under optimized conditions, an excellent linear relationship between fluorescence response and H2O2 concentration could be produced with a linear range from 0.309 to 4.900mM. The limit of detection of this probe was found to be 0.135mM. Moreover, the present probe exhibited a high selectivity of H2O2 over other reactive oxygen species/reactive nitrogen species (ROS/RNS) and was successfully used in the detection of H2O2 in real water samples.

Aggregation-Induced-Emission Materials with Different Electric Charges as an Artificial Tongue: Design, Construction, and Assembly with Various Pathogenic Bacteria for Effective Bacterial Imaging and Discrimination

Imaging-based total bacterial count and type identification of bacteria play crucial roles in clinical diagnostics, public health, biological and medical science, and environmental protection. Herein, we designed and synthesized a series of tetraphenylethenes (TPEs) functionalized with one or two aldehyde, carboxylic acid, and quaternary ammonium groups, which were successfully used as fluorescent materials for rapid and efficient staining of eight kinds of representative bacterial species, including pathogenic bacteria Vibrio cholera, Klebsiella pneumoniae, and Listeria monocytogenes and potential bioterrorism agent Yersinia pestis. By comparing the fluorescence intensity changes of the aggregation-induced-emission (AIE) materials before and after bacteria incubation, the sensing mechanisms (electrostatic versus hydrophobic interactions) were simply discussed. Moreover, the designed AIE materials were successfully used as an efficient artificial tongue for bacteria discrimination, and all of the bacteria tested were identified via linear discriminant analysis. Our current work provided a general method for simultaneous broad-spectrum bacterial imaging and species discrimination, which is helpful for bacteria surveillance in many fields.