Empowering CO2 Eco-Refrigeration With Colossal Breathing-Caloric-Like Effects in MOF-508b

Today, ≈20% of the electric consumption is devoted to refrigeration; while, ≈50% of the final energy is dedicated to heating applications. In this scenario, many cooling devices and heat-pumps are transitioning toward the use of CO2 as an eco-friendly refrigerant, favoring carbon circular economy. Nevertheless, CO2 still has some limitations, such as large operating pressures (70-150 bar) and a critical point at 31 °C, which compromises efficiency and increases technological complexity. Very recently, an innovative breathing-caloric mechanism in the MIL-53(Al) compound is reported, which implies gas adsorption under CO2 pressurization boosted by structural transitions and which overcomes the limitations of stand-alone CO2. Here, the breathing-caloric-like effects of MOF-508b are reported, surpassing by 40% those of MIL-53(Al). Moreover, the first thermometry device operating at room temperature and under the application of only 26 bar of CO2 is presented. Under those conditions, this material presents values of ΔT ≈ 30 K, reaching heating temperatures of 56 °C and cooling temperatures of -10 °C, which are already useful for space heating, air-conditioning, food refrigeration, and freezing applications.

Metal Doping to Control Gate Opening and Increase Methane Working Capacity in Isostructural Flexible Diamondoid Networks

Adsorbed natural gas (ANG) systems involve using porous materials to increase the working capacity and/or reduce the storage pressure compared to compressed natural gas (CNG). Flexible metal-organic materials (FMOMs) are particularly interesting in this context since their stepped isotherms can afford increased working capacity if the adsorption/desorption steps occur within the proper pressure range. We report herein that metal doping in a family of isostructural FMOMs, ML₂ (M=Co, Ni or Ni_x Co_1-x , L=4-(4-pyridyl)-biphenyl-4-carboxylic acid), enables control over the gate opening between non-porous (closed) and porous (open) phases at pressures relevant to methane storage. Specifically, methane-induced phase transformations can be fine-tuned by using different Ni/Co ratios to enhance methane working capacity. The optimal working capacity from 5 to 35 bar at 298 K (153 cm³  cm^-3 ) was found for Ni_0.89 Co_0.11 L₂ (X-dia-1-Ni_0.89 Co_0.11 ), which is greater than that of benchmark rigid MOFs.

Flexible metal-organic frameworks for gas storage and separation

Flexible metal-organic frameworks (MOFs) have gradually attracted much attention due to their reversible structural changes and flexible structural responses. The basic research of flexible MOFs is to study their dynamic responses under different external stimuli and translate the responses into applications. Most research studies on flexible MOFs focus on gas storage and separation, but lack a systematic summary. Here, we review the development of flexible MOFs, the structural transformation under the external effects of temperature, pressure, and guest molecules, and their applications in gas storage and separation. Microporous MOFs with flexible structures provide unique opportunities for fine-tuning their performance because the pore shape and size can be controlled by external stimuli. The characteristics of breathing phenomena and large specific surface area make flexible MOFs suitable candidates for gas storage and separation. Finally, the application prospects of flexible MOFs are reported.

Spiers Memorial Lecture: Coordination networks that switch between nonporous and porous structures: an emerging class of soft porous crystals

Coordination networks (CNs) are a class of (usually) crystalline solids typically comprised of metal ions or cluster nodes linked into 2 or 3 dimensions by organic and/or inorganic linker ligands. Whereas CNs tend to exhibit rigid structures and permanent porosity as exemplified by most metal-organic frameworks, MOFs, there exists a small but growing class of CNs that can undergo extreme, reversible structural transformation(s) when exposed to gases, vapours or liquids. These "soft" or "stimuli-responsive" CNs were introduced two decades ago and are attracting increasing attention thanks to two features: the amenability of CNs to design from first principles, thereby enabling crystal engineering of families of related CNs; and the potential utility of soft CNs for adsorptive storage and separation. A small but growing subset of soft CNs exhibit reversible phase transformations between nonporous (closed) and porous (open) structures. These "switching CNs" are distinguished by stepped sorption isotherms coincident with phase transformation and, perhaps counterintuitively, they can exhibit benchmark properties with respect to working capacity (storage) and selectivity (separation). This review addresses fundamental and applied aspects of switching CNs through surveying their sorption properties, analysing the structural transformations that enable switching, discussing structure-function relationships and presenting design principles for crystal engineering of the next generation of switching CNs.

High Pressure In Situ Single-Crystal X-Ray Diffraction Reveals Turnstile Linker Rotation Upon Room-Temperature Stepped Uptake of Alkanes

The rare availability of suitable single-crystal X-ray diffraction (SCXRD) structural data allows for the direct interpretation of the response of a framework to gas sorption and may lead to the development of improved functional porous materials. We report an in situ SCXRD structural investigation of a flexible MOF subjected to methane, ethane, propane, and butane gas pressures. Supporting theoretical investigations indicate weak host-guest interactions for the crystallographically modelled gaseous guests and, in addition, reveal that a turnstile mechanism facilitates the transport of alkanes through the seemingly nonporous system. Inflections present in the adsorption isotherms are furthermore rationalized as due to gate-opening, but without the expected creation of new accessible space.

Guest-occupiable space in the crystalline solid state: a simple rule-of-thumb for predicting occupancy

The generally greater degree of thermal motion of guest molecule(s) relative to the host often impedes their accurate modelling in crystal structures. We propose a 'rule-of-thumb' for estimating the maximum number of guest molecules that can be accommodated in a given amount of accessible space in an adequately modelled host structure. A survey of the Cambridge Structural Database was carried out to evaluate the fractional occupancy θ of the accessible space for almost 40 000 solvates involving 20 common solvents. Using widely accessible software tools, the volume of a guest is estimated as its van der Waals surface, while the guest-occupiable space of a potentially porous host is determined as that available to a virtual spherical probe. We propose terminology more appropriate to the supramolecular interpretation of surface typology: the probe-traversable and probe-accessible boundaries as traced out by the locus and surface of a spherical probe, respectively. High-throughput analysis using commercial and free software packages yielded a mean θ = 51.1(4)%, ranging from 45.3(6)% for hexane to 60(1)% for acetic acid.

Pressure-Gradient Sorption Calorimetry of Flexible Porous Materials: Implications for Intrinsic Thermal Management

Thermal management is an important consideration for applications that involve gas sorption by flexible porous materials. A pressure-gradient differential scanning calorimetric method was developed to measure the energetics of adsorption and desorption both directly and continuously. The method was applied to the uptake and release of CO₂ by the well-known flexible metal-organic frameworks MIL-53(Al) and MOF-508b. High-resolution differential enthalpy plots and total integral enthalpy values for sorption allow comprehensive assessment of the thermal behavior of the materials throughout the entire sorption process. During adsorption, the investigated materials display the ability to offset exothermic adsorption enthalpy against endothermic structural transition enthalpy, and vice versa during desorption. The results show that flexible materials offer reduced total integral heat over a working range when compared to rigid materials.

CO2-induced single-crystal to single-crystal transformations of an interpenetrated flexible MOF explained by in situ crystallographic analysis and molecular modeling

A molecular-level investigation is reported on breathing behaviour of a metal-organic framework (1) in response to CO2 gas pressure. High-pressure gas adsorption shows a pronounced step corresponding to a gate-opening phase transformation from a closed (1cp ) to a large-pore (1lp ) form. A plateau is observed upon desorption corresponding to narrow-pore intermediate form 1np which does not occur during adsorption. These events are corroborated by pressure-gradient differential scanning calorimetry and in situ single-crystal X-ray diffraction analysis under controlled CO2 gas pressure. Complete crystallographic characterisation facilitated a rationalisation of each phase transformation in the series 1cp → 1lp → 1np → 1cp during adsorption and subsequent desorption. Metropolis grand-canonical Monte Carlo simulations and DFT-PBE-D3 interaction energy calculations strongly underpin this first detailed structural investigation of an intermediate phase encountered upon desorption.

Host–guest energetic materials constructed by incorporating oxidizing gas molecules into an organic lattice cavity toward achieving highly-energetic and low-sensitivity performance

Powerful oxidizer N₂O was incorporated into an organic lattice cavity through aeration crystallization, and smart host–guest energetic materials with highly-energetic and low-sensitivity performance were obtained.

A new dynamic framework with direct in situ visualisation of breathing under CO2 gas pressure

Structural evidence from in situ single-crystal X-ray diffraction analysis reveals flexibility in a new non-interpenetrated pillared-layer MOF that switches between a wide-pore and a narrow-pore form.

Visualizing Structural Transformation and Guest Binding in a Flexible Metal-Organic Framework under High Pressure and Room Temperature

Understanding the effect of gas molecules on the framework structures upon gas sorption in porous materials is highly desirable for the development of gas storage and separation technologies. However, this remains challenging for flexible metal-organic frameworks (MOFs) which feature "gate-opening/gate-closing" or "breathing" sorption behaviors under external stimuli. Herein, we report such a flexible Cd-MOF that exhibits "gating effect" upon CO₂ sorption. The ability of the desolvated flexible Cd-MOF to retain crystal singularity under high pressure enables the direct visualization of the reversible closed-/open-pore states before and after the structural transformation as induced by CO₂ adsorption/desorption through in situ single-crystal X-ray diffraction experiments. The binding sites of CO₂ molecules within the flexible MOF under high pressure and room temperature have also been identified via combined in situ single-crystal X-ray diffraction and powder X-ray diffraction studies, facilitating the elucidation of the states observed during gate-opening/gate-closing behaviors. Our work therefore lays a foundation to understand the high-pressure gas sorption within flexible MOFs at ambient temperature, which will help to improve the design efforts of new flexible MOFs for applications in responsive gas sorption and separation.