Fluorescent carbon nanoparticles: mimicking hydrogen peroxide properties in a chemiluminescence system

Dual-mode colorimetric and chemiluminescence aptasensor for organophosphorus pesticides detection using aptamer-regulated peroxidase-like activity of TA-Cu

The residues of organophosphorus pesticides (OPs) in food pose a huge threat to human health. Therefore, the development of detection methods with simple design and high sensitivity is urgently needed. Here, a colorimetric/chemiluminescence (CL) dual-mode aptasensor strategy with high selectivity and sensitivity for detecting Parathion-methyl (PM) was designed based on aptamer-regulated nanozyme activity. The Parathion-methyl specific aptamer was anchored onto the surface of trimesic acid-Cu (TA-Cu) nanozyme, which can regulate the catalytic ability of TA-Cu nanozyme towards substrates and also serve as a specific recognition unit for PM. In the presence of PM, the aptamers bind to PM and detach from the surface of TA-Cu nanozyme, which effects the catalytic ability of TA-Cu nanozyme towards substrates. Based on the above experimental phenomena, a colorimetric/CL dual-mode aptasensor method for PM was developed, with the linear ranges of 0.01-20 and 1-100 ng/mL, the limit of detections of 0.004 and 0.45 ng/mL, respectively. More importantly, compared with most single mode analysis methods, this dual-mode sensing system can conduct self-inspection by comparing the detection results of each mode, thus improving the reliability of the detection results.

Determination of lansoprazole in pharmaceuticals using flow injection with rhodamine 6G-diperiodatoargentate (III)-chemiluminescence detection

A chemiluminescence (CL) method based on rhodamine 6G (R6G)-diperiodatoargentate (III) (silver (III) complex) reaction in acid solution is reported for the determination of lansoprazole (LNP) combined with flow injection (FI) technique. The most likely mechanism for CL reaction was elucidated considering reported data, spectrophotometric and spectrofluorimetric studies. The weak CL reaction between R6G and silver (III) complex could be magnanimously increased in the presence of LNP with a limit of detection (LOD) of 0.002 mg L^-1 (S/N = 3), the linear range of 0.01-10 mg L^-1 (R² = 0.9997, n = 7), relative standard deviations (RSD) of 1.2-3.2% (n = 4) and injection throughput of 140 h^-1 . No interference activity of commonly found excipients in LNP was detected. After LNP extraction from pharmaceutical samples, the recovery rate ranged from 93-110% (RSD, 1.4-3.3%, n = 4) was calculated. The results of proposed flow CL method were assessed with a spectrophotometric approach applying paired Student's t-test and the calculated value (0.178) was lower than the distributed value (2.20) at a 95% confidence limit.

General, Metal-free Synthesis of Carbon Nanofiber Assemblies from Plant Oils

We designed a metal-free synthesis of carbon nanofiber based on ketene chemistry using phosphorus pentoxide (P2 O5 ) and vegetable oil. Based on the characterization of intermediates, P2 O5 -oil reaction yielded most possibly alkylketenes, which polymerized into poly(ketene) with abundant enol groups. The enol groups further reacted with P2 O5 , forcing the poly(ketene) to assemble into a nano-sized preassembly structure. Moderate heating transforms these structures into carbonaceaus nanofibers. This approach is applicable to other chemicals with similar structure to vegetable oil. The carbon nanofibers with P-O-C functionalization show relatively high graphitization degree and promising textural properties. The C-O-P environment accounts for 66 at % of the total P and creates a superior thermal stability. As a model application, a CDI system built of a carbon-nanofiber-based electrode countered by an activated carbon-based electrode exhibited exceptional performance.

ZIF-67 MOF-derived Co nanoparticles supported on N-doped carbon skeletons for the amperometric determination of hydrogen peroxide

ZIF-67-derived Co nanoparticles supported on N-doped carbon skeletons have been prepared from melamine foam (Co-NPs/NCs) for non-enzymatic electrochemical H₂O₂ detection. The synthesis of Co-NPs/NCs was demonstrated via calcination treatment using melamine foam (MF) and ZIF-67 as precursors. The experimental results show that Co-NPs/NCs composites exhibit eminent catalytic activity toward specific determination of H₂O₂ with high selectivity and sensitivity (252.43 and 203.88 μA mM^-1 cm^-2), low LOD (0.12 μM), and wide linear ranges (10-2080 and 2080-11,800 μM). The excellent performance might be ascribed to the synergetic effects of MOF and N-doped carbon skeletons. The carbon skeletons serve as a conductive bridge and provide a large specific surface area, which can facilitate electron transfer and well disperse nanoparticles. This non-enzymatic electrochemical sensor based on Co-NPs/NCs can successfully detect H₂O₂ secreted by living cells, indicating its great potential in the early diagnosis and pathological exploration of disease.

The Role of Carbon Quantum Dots in Organic Photovoltaics: A Short Overview

Carbon quantum dots (CDs) are a new class of fluorescent carbonaceous nanomaterials that were casually discovered in 2004. Since then, they have become object of great interest in the scientific community because of their peculiar optical properties (e.g., size-dependent and excitation wavelength-dependent fluorescence), which make them very similar to the well-known semiconductor quantum dots and suitable for application in photovoltaic devices (PVs). In fact, with appropriate structural engineering, it is possible to modulate CDs photoluminescence properties, band gap, and energy levels in order to realize the band matching suitable to enable the desired directional flow of charge carriers within the PV device architecture in which they are implanted. Considering the latest developments, in the present short review, the employment of CDs in organic photovoltaic devices (OPVs) will be summarized, in order to study the role played by these nanomaterials in the improvement of the performances of the devices. After a first brief summary of the strategies of structural engineering of CDs and the effects on their optical properties, the attention will be devoted to the recent highlights of CDs application in organic solar cells (OSCs) and in dye sensitized solar cells (DSSCs), in order to guide the users towards the full exploitation of the use of these nanomaterials in such OPV devices.

Fluorescence quenching mechanism and the application of green carbon nanodots in the detection of heavy metal ions: a review

This review article highlights the quenching mechanism and applications of green CNDs for the detection of metal ions.

A Novel Cell-Assisted Enhanced Chemiluminescence Strategy for Rapid and Label-Free Detection of Tumor Cells in Whole Blood

In this study, an interesting phenomenon was found where cells (including tumor and normal cells) managed to significantly enhance chemiluminescence (CL) signals. The possible reaction mechanism may be that cells can be severely damaged by CL substrates, and the released contents, possibly proteins (such as cytochrome c), can remarkably magnify CL owing to the increased production of singlet oxygen. More importantly, based on the above phenomena, a novel cell-assisted enhanced CL strategy was proposed for the rapid and label-free detection of tumor cells. The complexes of aptamer sgc8c and streptavidin-modified magnetic beads were employed to recognize and isolate target tumor cells from whole blood. The enhanced CL intensity, which was triggered directly by the captured cells, was measured. The proposed strategy exhibited a good detection performance with a linear range from 200 to 10,000 cells/mL. The analysis can be finished in ∼30 min, and the limit of detection was down to 100 cells/mL. The recoveries and relative standard deviations were 97.81-102.71% and 3.46-12.71%, respectively. Moreover, the established method can successfully distinguish the leukemia patients from healthy people. Therefore, it provides a novel, rapid, and simple method for the determination of tumor cells, which can be used in further practice.

Carbon nanoparticles with oligonucleotide probes for a label-free sensitive antibiotic residues detection based on competitive analysis

Carbon nanoparticles (CNPs) have been combined with aptamer, providing a broad application in small molecule. CNPs can be quenched by small molecules and are usually applied as luminescent probes because of their photophysical characteristics. In this work, we developed a competitive analysis for antibiotic residues detection based on carbon nanoparticles (CNPs) and oligonucleotide probes. Oligonucleotide probes including oxytetracycline (OTC) aptamer was exploited for recognition OTC and was used to restore the luminescence. Tetracycline (TC), as a competitor of OTC, was utilized to quench the luminescence of CNPs and reduce the sample matrix effect. Under optimal conditions, the linear rang of OTC was 0.010~1.0 ng/mL with the relative standard deviations (RSDs) from 2.91% to 11.3%, and the limit of detection (LOD) was low to 0.002 ng/mL. Moreover, the proposal was successfully applied to analyze OTC from drink water, indicating that this approach has great potential for other small molecule analysis.

In Situ Synthesis of Gold Nanoparticles/Metal-Organic Gels Hybrids with Excellent Peroxidase-Like Activity for Sensitive Chemiluminescence Detection of Organophosphorus Pesticides

Until now, despite much progress in the study of metal-organic gels (MOGs), the modification of transition-metal containing MOGs with noble metal nanoparticles (NPs) is far from fully developed. Herein, iron-based MOGs nanosheet hybrids with gold NPs (AuNPs) immobilization were first synthesized by a facile in situ grown strategy at ambient conditions. It is found that the as-prepared AuNPs/MOGs (Fe) hybrids exhibited enhanced mimicking peroxidase-like activity, making them endowed with outstanding performance in chemiluminescence (CL) field in the presence of H₂O₂. The remarkable CL enhancement by AuNPs/MOGs (Fe) hybrids was attributed to the modification of AuNPs on MOGs (Fe) nanosheets, which could synergistically accelerate the CL reaction by speeding up the generation of OH^•, O₂^•-, and ¹O₂. Accordingly, a sensitive CL detection of organophosphorus pesticides was successfully achieved by the AuNPs/MOGs (Fe) hybrids CL enhancing system in the range of 5-800 nM with a detection limit of 1 nM. We envision that this highly active and novel enzyme mimetic catalyst can be applicable to other extended AuNPs/MOGs (Fe) hybrid-based CL systems for sensitive detection of various analytes.

Recent advances and developments on integrating nanotechnology with chemiluminescence assays

Chemiluminescence (CL) techniques are extensively utilized for detection of analytes due to their high sensitivity, rapidity and selectivity. With the advent of nanotechnology and incorporation of the nanoparticles in the CL system has revolutionized the assays due to their unique optical and mechanical properties. Several CL-based reactions have been developed where these nanoparticle based CL sensors have evolved as excellent prospects for sensing in various analytical applications. This review article addresses the nanoparticles based CL detection system that are recently developed, the mechanisms has been summarized and the role of luminophors have been discussed. This article critically analyzes the optimal conditions for the CL detection along with quantitative assessment of the analytes. We have included the use of semiconductor nanoparticles, metal nanoparticles, graphene based nanostructures, mesoporous nanospheres, layered double hydroxides, clays for CL detection. The scope and application of these nanoscale material based CL system in various branches of science and technology including chemistry, biomedical applications, pharmaceutics, food, environmental and toxicological applications has been critically summarized.

Quantum dots: from fluorescence to chemiluminescence, bioluminescence, electrochemiluminescence, and electrochemistry

During the past decade, nanotechnology has become one of the major forces driving basic and applied research. As a novel class of inorganic fluorochromes, research into quantum dots (QDs) has become one of the fastest growing fields of nanotechnology today. QDs are made of a semiconductor material with tunable physical dimensions as well as unique optoelectronic properties, and have attracted multidisciplinary research efforts to further their potential bioanalytical applications. Recently, numerous optical properties of QDs, such as narrow emission band peaks, broad absorption spectra, intense signals, and remarkable resistance to photobleaching, have made them biocompatible and sensitive for biological assays. In this review, we give an overview of these exciting materials and describe their potential, especially in biomolecules analysis, including fluorescence detection, chemiluminescence detection, bioluminescence detection, electrochemiluminescence detection, and electrochemical detection. Finally, conclusions are made, including highlighting some critical challenges remaining and a perspective of how this field can be expected to develop in the future.

Novel Iron(III)-Based Metal-Organic Gels with Superior Catalytic Performance toward Luminol Chemiluminescence

Novel metal-organic gels (MOGs) consisting of iron (Fe³⁺) as the central ion and 1,10-phenanthroline-2,9-dicarboxylic acid (PDA) as the ligand were synthesized by a mild facile strategy. The Fe(III)-containing metal-organic xerogels (Fe-MOXs), obtained after removing the solvents in MOGs, were found to exhibit outstanding performance in the catalysis of luminol chemiluminescence (CL) for the first time even in the absence of extra oxidants such as hydrogen peroxide. The possible CL mechanism was discussed according to the electro/optical measurements, including electron paramagnetic resonance (EPR), UV-vis absorption, and CL spectra, as well as the effects of radical scavengers on Fe-MOXs-catalyzed luminol CL system, suggesting that the CL emission of luminol might originate from the intrinsic oxidase-like catalytic activity of Fe-MOXs on the decomposition of dissolved oxygen. Additionally, the potential practical application of the resulting luminol-Fe-MOXs system was evaluated by the quantitative analysis of dopamine. Good linearity over the range from 0.05 to 0.6 μM was obtained with the limit of detection (LOD, 3σ) of 20.4 nM and acceptable recoveries ranging from 98.6 to 105.4% in human urine. These results may open up the promising application of novel metal-organic gels as highly effective catalysts in the field of chemiluminescence.

Chemiluminescence detection of trace iodide with flow injection analysis of KMnO4 -carbon dots system

Ultra-weak chemiluminescence (CL) from the reaction of iodide and KMnO₄ was strongly enhanced by carbon nanodots (CNDs) in an acidic medium. The CL intensity was directly proportional to the concentration of iodide in the solution. Therefore, a flow-injection CL system with high sensitivity, selectivity and reproducibility is proposed for the determination of iodide. The proposed method exhibited advantages over a linear range of 3.0 × 10^-6 -1.0 × 10^-4  mol/L and had a detection limit of 3.5 × 10^-7  mol/L. The method was successfully applied to the evaluation of iodide in food samples with recoveries of between 96 and 103%. The relative standard deviations were 2.1 and 4.1% for intra- and inter-assay precision, respectively.

Quantitative determination of VEGF165 in cell culture medium by aptamer sandwich based chemiluminescence assay

In this work, we have developed a sensitive and selective chemiluminescence (CL) assay for vascular endothelial growth factor (VEGF165) quantitative detection based on two specific VEGF165 binding aptamers (Apt). VEGF is a predominant biomarker in cancer angiogenesis, and sensitive detection method of VEGF are highly demanded for both academic study and clinical diagnosis of multiple cancers. In our experiment, VEGF165 was captured in a sandwich structure assembled by two binding aptamers, one capture aptamer was immobilized on streptavidin-coated magnetic beads (MBs) and another VEGF-binding aptamer was labeled by biotin for further phosphatase conjunction. After Apt-VEGF-Apt sandwich was formed on MBs surface, alkaline phosphatase (ALP) was modified to the second aptamer to catalyze CL reaction. By applying 4-methoxy-4-(3-phosphatephenyl)-spiro-(1,2-dioxetane-3,2-adamantane) (AMPPD) as CL substrate, strong signal intensity was achieved. VEGF165 content as low as 1ng/mL was detected in standard spiked samples by our assay, and linear range of working curve was confirmed from 1 to 20ng/mL. Then our method was successfully applied for cell culture medium analysis and on-chip hypoxic HepG2-HUVEC co-culture model study with excellent accuracy equal to ELISA Kit. Our developed assay demonstrated an outstanding performance in VEGF165 quantification and may be further extended to clinical testing of important biomarkers as well as probing microchip cell culture model.

Luminol and gold nanoparticle-co-precipitated reduced graphene oxide hybrids with long-persistent chemiluminescence for cholesterol detection

Luminol and AuNP dual-functionalized rGO hybrids (rGO/AuNP/luminol) have been synthesized to generate long-persistent chemiluminescence, which can be used as a chemiluminescent biosensing platform for the detection of cholesterol.