Self-wetting triphase photocatalysis for effective and selective removal of hydrophilic volatile organic compounds in air

Photocatalytic air purification is widely regarded as a promising technology, but it calls for more efficient photocatalytic materials and systems. Here we report a strategy to introduce an in-situ water (self-wetting) layer on WO3 by coating hygroscopic periodic acid (PA) to dramatically enhance the photocatalytic removal of hydrophilic volatile organic compounds (VOCs) in air. In ambient air, water vapor is condensed on WO3 to make a unique tri-phasic (air/water/WO3) system. The in-situ formed water layer selectively concentrates hydrophilic VOCs. PA plays the multiple roles as a water-layer inducer, a surface-complexing ligand enhancing visible light absorption, and a strong electron acceptor. Under visible light, the photogenerated electrons are rapidly scavenged by periodate to produce more •OH. PA/WO3 exhibits excellent photocatalytic activity for acetaldehyde degradation with an apparent quantum efficiency of 64.3% at 460 nm, which is the highest value ever reported. Other hydrophilic VOCs like formaldehyde that are readily dissolved into the in-situ water layer on WO3 are also rapidly degraded, whereas hydrophobic VOCs remain intact during photocatalysis due to the "water barrier effect". PA/WO3 successfully demonstrated an excellent capacity for degrading hydrophilic VOCs selectively in wide-range concentrations (0.5-700 ppmv).

Tuning the Conduction Band Potential of Bi-based Semiconductors Using a Combination of Organic Ligands

Most Bi-based semiconductors are incapable of photocatalytic reduction reaction from a thermodynamic view, owing to relatively positive conduction band potentials (E_CB ). Here, a novel Bi-based metal-organic framework (Bi-MBA, MBA=4-mercaptobenzoic acid) with excellent photocatalytic reduction activities is developed. The E_CB of Bi-MBA locates at -1.38 eV, which is able to efficiently reduce O₂ , Cr^VI and CO₂ . Theoretical calculations reveal the significant contribution of organic ligand (MBA) to the conduction band. Our results provide an effective route to improve the photocatalytic reduction activities of Bi-based photocatalysts.

Establishing Interfacial Charge-Transfer Transitions on Ferroelectric Perovskites: An Efficient Route for Photoelectrochemical Bioanalysis

This work presents the concept of establishing interfacial charge-transfer transitions (ICTT) on ferroelectric perovskites for efficient photoelectrochemical (PEC) bioanalysis. The model system was exemplified by using representative lead titanate (PbTiO₃) and an enzyme tandem consisting of the isocitrate dehydrogenase (ICDH) and p-hydroxybenzoate hydroxylase (PHBH). The enzymatic generation of protocatechuic acid (PCA) can coordinate onto the surface of the PbTiO₃ and hence form the ICTT that enables direct ligand-to-metal charge transfer from the highest occupied molecular orbital (HOMO) of PCA to the conduction band (CB) of PbTiO₃ under light irradiation. Due to the ferroelectric polarization induced electric field of PbTiO₃ and the surface polarity of PCA modification, enhanced charge separation of the ICTT contributes to the generation of anodic photocurrent and thus underlies a unique route for detecting the enzymatic activity or its substrate. For dehydrogenase detection, this strategy has better performance than some classical methodologies in terms of high sensitivity and improved selectivity. This work not only features ICTT establishment on ferroelectric perovskites for unique bioanalysis but also provides new insights into the utilization of ferroelectric perovskites for advanced PEC bioanalysis.

A Novel Flower-Like Ag/AgCl/BiOCOOH Ternary Heterojunction Photocatalyst: Facile Construction and Its Superior Photocatalytic Performance for the Removal of Toxic Pollutants

Novel 3D flower-like Ag/AgCl/BiOCOOH ternary heterojunction photocatalysts were fabricated by the solvothermal and in-situ precipitation methods, followed by light reduction treatment. The Ag/AgCl nanoparticles were homogeneously distributed on 3D BiOCOOH microspheres. These obtained catalysts were characterized by XRD, SEM, TEM, diffuse reflectance spectra (DRS), and photoluminescence (PL). As expected, they exhibited extraordinary photocatalytic capabilities for the elimination of rhodamine B (RhB) and ciprofloxacin (CIP) under simulated sunlight, the results revealed that the Ag/AgCl/BiOCH-3 with 20 wt.% of Ag/AgCl possessed the maximum activity, and the rate constant for the RhB degradation reached up to 0.1353 min⁻¹, which was about 16.5 or 12.2 times that of bare BiOCOOH or Ag/AgCl. The PL characterization further verified that Ag/AgCl/BiOCOOH heterojunctions were endowed with the effective separation of photogenerated carriers. The excellent photocatalytic ability of Ag/AgCl/BiOCOOH could be credited to the synergistic interactions between Ag/AgCl and BiOCOOH, which not only substantially widened the light absorption, but also evidently hindered the charge recombination. The trapping experiments revealed that the dominant reactive species in RhB removal were h⁺, •OH, and •O₂⁻ species. In addition, Ag/AgCl/BiOCOOH was quite stable and easily recyclable after multiple cycles. The above results imply that the 3D flower-like Ag/AgCl/BiOCOOH ternary heterojunction photocatalyst holds promising prospects in treating industrial wastewater.

Band gap engineering of BiOI via oxygen vacancies induced by graphene for improved photocatalysis

A reduced graphene oxide–bismuth iodide oxide (rGO–BiOI) composite was prepared by a thermal reduction method.

Synthesis of Flower-Like AgI/BiOCOOH p-n Heterojunctions With Enhanced Visible-Light Photocatalytic Performance for the Removal of Toxic Pollutants

In this study, flower-like AgI/BiOCOOH heterojunctions were constructed through a two-step procedure involving the solvothermal synthesis of BiOCOOH microflowers followed by AgI modification using a precipitation method. These novel photocatalysts were systematically examined by XRD, UV–vis DRS, SEM, TEM, EDS, and PL spectroscopy techniques. The AgI/BiOCOOH heterojunction were studied as a decent photocatalyst for the removal of the industrial dye (rhodamine B, and methyl blue) and antibiotic (tetracycline) under visible light. The AgI/BiOCOOH heterojunctions are much more active than bare BiOCOOH, and AgI, which could be ascribed to the improved separation of charge carriers, resulting from the formation of p-n heterojunction between two constituents. The holes (h⁺) and superoxide radical (•O2-) were detected as the main active species responsible for the pollutant degradation. The results showed that a highly efficient visible-light-driven photocatalytic system was developed for the decomposition of toxic pollutants.

Milling-Induced Synthesis of BiOCl1-x Brx Solid Solution and Their Adsorptive and Photocatalytic Performance

CH₃ COO(BiO) (denoted as BiOAc) is one of the most easily obtained bismuth compounds and was for the first time proposed by our group as an effective UV light photocatalyst. Herein, BiOCl_{1- x} Br_x (x refers to the feeding atomic ratio) were obtained using a facile solid state milling and subsequent water washing. More importantly, all of the as-prepared BiOCl_{1- x} Br_x possessed better visible light photocatalytic activity to the corresponding ones obtained by previously reported solution route. Especially at an optimal x value of 0.5, the solid solution showed the highest photodegradation efficiency (~100%) for rhodamine B (RhB) with a concentration of 30 mg L^-1 , whereas the degradation efficiency was only 63% over that obtained by solution route. Furthermore, the as-prepared BiOCl_0.5 Br_0.5 also exhibited excellent photodegradation activity for malachite green (MG). The superior photocatalytic performance of the as-prepared BiOCl_0.5 Br_0.5 could be attributed to its thinner sheetlike structures and highly exposed (001) facets, which enable effective separation of the photogenerated electrons and holes along the [001] direction. In addition, the as-prepared BiOCl_0.5 Br_0.5 revealed dramatic adsorption capacity for cationic dyes like MG, RhB and methylene violet (MV), as well as anion (Cr₂ O₇ )^2- owing to electrostatic interaction between cationic dyes and negatively charged surface of BiOCl_0.5 Br_0.5 , and positively charged surface in K₂ Cr₂ O₇ solution (pH ≈ 3).

Multiple halide anion doped layered bismuth terephthalate with excellent photocatalysis for pollutant removal

Doping multiple halide anions into bismuth terephthalate can effectively improve photocatalytic activities. The F^–, Cl^–, Br^– codoped hybrids exhibit excellent photocatalytic activities on RhB and salicylic acid.