A ratiometric fluorescent chemosensor for selective and visual detection of phosgene in solutions and in the gas phase

Endoplasmic reticulum-targeting fluorescence turn-on probe for nitric oxide detection in living cells and serum samples

Nitric oxide (NO) is an important gas signaling molecule, and endoplasmic reticulum (ER) stress induced by NO may be related to the pathogenesis of many diseases. Therefore, the development of ER-targeted fluorescent probes for NO is of great significance to investigate the relationship between ER stress and NO concentration changes in related diseases. Herein, an ER-targeted fluorescent probe (ER-Np) for sensing NO was constructed. ER-Np was served as an excellent tool for detection NO with high selectivity, sensitivity and ER-targetable ability. Moreover, fluorescence imaging experiments indicated that ER-Np is capable of imaging NO in living cells. Impressively, visualization of endogenous NO production during dithiothreitol (DTT)-induced ER stress in living cells was successfully observed. In addition, we found that serum NO levels were upregulated in epilepsy children, which opens up a new avenue for further understanding the relationship between the diagnostic of epilepsy.

Electron-donating and -withdrawing groups discriminate the fluorometric sensing of phosgene

Phosgene, diphosgene, and chlorine are called choking agents due to their acute toxicity to the respiratory system by directly attacking through inhalation and causing acute hypoxia, asphyxia and death. For these reasons, small-molecule fluorescent probes have been developed for their detection to ensure public safety. In this regard, two thiophene-based chemodosimetric fluorescent probes TCAO ((Z)-3-(4-(dimethylamino)phenyl)thiophene-2-carbaldehyde oxime) and HMBT ((Z)-4-(2-((hydroxyimino)methyl)thiophen-3-yl)benzonitrile) were designed, synthesized and characterized using 1H-NMR, 13C NMR, FT-IR spectroscopy and HRMS methods. Probe TCAO exhibited higher selectivity and sensitivity for detecting phosgene than probe HMBT. The electron-donating group (EDG) and electron-withdrawing group (EWG) play a crucial role in detecting phosgene. TCAO, bearing EDG, exhibited a fluorescence 'turn-on' response by the NGP-assisted conversion of aldoxime to the cyano group in the presence of phosgene; whereas HMBT, bearing EWG, did not show any fluorometric response. Therefore, further studies were conducted on TCAO, and the quantum yield changed from Φ = 0.043 to Φ = 0.155 in the presence of phosgene. The limit of detection for TCAO was estimated to be as low as 51 nm. In addition, onsite monitoring for visual detection was performed using the easy-to-handle paper-strip method.

A Ratiometric Benzimidazole-Based Fluorescent Probe for The Recognition of Phosgene in Solution and Gaseous Phases

Considering the high toxicity and widespread application of phosgene, there is an urgent need to develop a simple and sensitive method for detecting phosgene. In this work, we designed and synthesized a novel ratiometric fluorescent probe 1 containing fluorophores of benzimidazole and benzothiazole. Probe 1 showed excellent sensitivity (< 30 s) and selectivity (LOD = 3.82 nM) for phosgene and significant ratiometric fluorescence changes. In addition, 1-loaded polystyrene membrane test strips were used to conveniently and efficiently detect phosgene gas (0.5 ppm) via the naked eye and the RGB APP of the smartphone, indicating that this probe has great potential for phosgene detection in the gaseous phase.

Ratiometric Fluorescent Probe for the Detection of Nanomolar Phosgene in Solution and Gaseous Phase: Advancing Crime Detection Applications

Phosgene, an exceptionally hazardous gas, poses a grave concern for the health and safety of the general public. The present study describes a fluorescent ratiometric probe for phosgene employing 2-(naphthalen-2-yl) benzo[d]oxazol-5-amine (NOA) with an amino group as the recognition site. NOA detects phosgene through the intramolecular charge transfer mechanism. The electron-rich amine group of NOA attacks the electrophilic carbonyl group of phosgene, resulting in a quick response within 20 s. NOA demonstrates a low detection limit of 60 nM while maintaining high selectivity and sensitivity toward phosgene. The final product was isolated and verified by nuclear magnetic resonance spectroscopy. The probe can detect phosgene not just quickly in a solution environment but also in its solid state. The probe's applications in fingerprint imaging and bioimaging are also demonstrated.

Highly sensitive and selective detection of triphosgene with a 2-(2'-hydroxyphenyl)benzimidazole derived fluorescent probe

In this work, a 2-(2'-hydroxyphenyl)benzimidazole derived fluorescent probe, 2-(2'-hydroxy-4'-aminophenyl)benzimidazole (4-AHBI), was synthesized and its fluorescent behavior toward triphosgene were evaluated. The results showed that 4-AHBI exhibited high sensitivity (limit of detection, 0.08 nM) and excellent selectivity for triphosgene over other acyl chlorides including phosgene in CH2Cl2 solution. Moreover, 4-AHBI loaded test strips were prepared for the practical sensing of triphosgene.

Fluorescent probes for the detection of chemical warfare agents

Chemical warfare agents (CWAs) are toxic chemicals that have been intentionally developed for targeted and deadly use on humans. Although intended for military targets, the use of CWAs more often than not results in mass civilian casualties. To prevent further atrocities from occurring during conflicts, a global ban was implemented through the chemical weapons convention, with the aim of eliminating the development, stockpiling, and use of CWAs. Unfortunately, because of their relatively low cost, ease of manufacture and effectiveness on mass populations, CWAs still exist in today's world. CWAs have been used in several recent terrorist-related incidents and conflicts (e.g., Syria). Therefore, they continue to remain serious threats to public health and safety and to global peace and stability. Analytical methods that can accurately detect CWAs are essential to global security measures and for forensic analysis. Small molecule fluorescent probes have emerged as attractive chemical tools for CWA detection, due to their simplicity, ease of use, excellent selectivity and high sensitivity, as well as their ability to be translated into handheld devices. This includes the ability to non-invasively image CWA distribution within living systems (in vitro and in vivo) to permit in-depth evaluation of their biological interactions and allow potential identification of therapeutic countermeasures. In this review, we provide an overview of the various reported fluorescent probes that have been designed for the detection of CWAs. The mechanism for CWA detection, change in optical output and application for each fluorescent probe are described in detail. The limitations and challenges of currently developed fluorescent probes are discussed providing insight into the future development of this research area. We hope the information provided in this review will give readers a clear understanding of how to design a fluorescent probe for the detection of a specific CWA. We anticipate that this will advance our security systems and provide new tools for environmental and toxicology monitoring.

Rapid and ratiometric fluorescent detection of phosgene by a red-emissive ESIPT-based-benzoquinolone probe

Phosgene is a highly toxic gas that poses a serious threat to human health and public safety. Therefore, it is of great importance to develop an available detection method enabling on-the-spot measurement of phosgene. In this paper, we report a novel ESIPT fluorescent probe for phosgene detection based on quinolone fluorophore. This probe exhibits rapid response (in 10 s), stable signal output (last for 10 min), high sensitivity (LOD ∼ 6.7 nM), and distinct emission color change (red to green) towards phosgene. The sensing mechanism was investigated by using ¹H NMR, HRMS and fluorescence lifetime techniques, confirming that the amidation reaction between phosgene and quinolone effectively suppressed the ESIPT process of probe. Eventually, this probe was fabricated into polymer nanofibers by electrospinning and successfully employed to monitor gaseous phosgene with high specificity. This work provided a promising analytical tool for rapid and ratiometric detection of phosgene both in solution and in the gas phase.

A Rapid, Highly Sensitive and Selective Phosgene Sensor Based on 5,6-Pinenepyridine

The toxicity of phosgene (COCl₂ ) combined with its extensive use as a reactant and building block in the chemical industry make its fast and accurate detection a prerequisite. We have developed a carboxylic derivative of 5,6-pinenepyridine which is able to act as colorimetric and fluorimetric sensor for phosgene in air and solution. For the first time, the formation of a pyrido-[2,1-a]isoindolone was used for this purpose. In solution, the sensing reaction is extremely fast (under 5 s), selective and highly sensitive, with a limit of detection (LOD) of 9.7 nM/0.8 ppb. When fixed on a solid support, the sensor is able to detect the presence of gaseous phosgene down to concentrations of 0.1 ppm, one of the lowest values reported to date.

A dual-channel chemodosimetric sensor for discrimination between hypochlorite and nerve-agent mimic DCP: application on human breast cancer cells

A styryl bridge containing a triphenylamine-thioimidazole hydrazine-based dual-analyte-responsive fluorescent sensor was designed and synthesized for the detection of the nerve gas simulant diethyl chlorophosphate (DCP) and hypochlorite (OCl^-) for the first time. Hypochlorite induces oxidative intramolecular cyclization to give a triazole structure, which exhibited blue fluorescence with excellent selectivity and a low detection limit (8.05 × 10^-7 M) in solution. Conversely, the probe forms a phosphorylated intermediate with diethyl chlorophosphate, which undergoes further hydrolyzation and presents green fluorescence in a ratiometric mode with a low detection limit (3.56 × 10^-8 M). Additionally, the as-designed sensor was utilized to construct a portable kit for real-time monitoring of DCP in a discriminatory, simple and safe manner. Lastly, the probe was also productively employed for in situ imaging of OCl^- and DCP in the living cell.

An AIE fluorescent sensor for rapid and selective detection of phosgene

Herein, an aggregation-induced emission (AIE)-based sensor, 4-(1,2,2-triphenylvinyl)benzoxime (TPE-phos), has been rationally designed for phosgene detection. The sensor has a tetraphenylethylene unit combined with an oxime moiety. TPE-phos undergoes nitrile formation after the oxime group reacts with phosgene, which will give a significant "light-up" fluorescence due to the AIE effect within seconds.

A naphthimide-based ratiometric fluorescent probe for selective and visual detection of phosgene in solution and the gas phase

As a colorless, highly toxic and widely used chemical reagent, phosgene poses a potentially serious threat to public health and environmental safety. Therefore, there is an urgent need to develop a simple and sensitive method for detecting phosgene. In this work, a ratiometric fluorescent probe (NED) for phosgene was developed by utilizing 4-substituted 1,8-naphthimide unit as the fluorophore and ethylenediamine as the recognition moiety. The probe NED undergoes intramolecular cyclization reaction with phosgene, resulting in a remarkable ratiometric fluorescence response. The probe NED displays high sensitivity (LOD = 4.9 nM), excellent ratiometric fluorescence signal, and high selectivity toward phosgene over other relevant analytes. In addition, paper test strip capable of visually detecting gaseous phosgene has also been fabricated.

Visual pH Sensors: From a Chemical Perspective to New Bioengineered Materials

Many human activities and cellular functions depend upon precise pH values, and pH monitoring is considered a fundamental task. Colorimetric and fluorescence sensors for pH measurements are chemical and biochemical tools able to sense protons and produce a visible signal. These pH sensors are gaining widespread attention as non-destructive tools, visible to the human eye, that are capable of a real-time and in-situ response. Optical “visual” sensors are expanding researchers’ interests in many chemical contexts and are routinely used for biological, environmental, and medical applications. In this review we provide an overview of trending colorimetric, fluorescent, or dual-mode responsive visual pH sensors. These sensors include molecular synthetic organic sensors, metal organic frameworks (MOF), engineered sensing nanomaterials, and bioengineered sensors. We review different typological chemical entities of visual pH sensors, three-dimensional structures, and signaling mechanisms for pH sensing and applications; developed in the past five years. The progression of this review from simple organic molecules to biological macromolecules seeks to benefit beginners and scientists embarking on a project of pH sensing development, who needs background information and a quick update on advances in the field. Lessons learned from these tools will aid pH determination projects and provide new ways of thinking for cell bioimaging or other cutting-edge in vivo applications.

Two-phase activated colorimetric and ratiometric fluorescent sensor for visual detection of phosgene via AIE coupled TICT processes

In this paper, we specifically designed and synthesized an excellent colorimetric and ratiometric fluorescent sensor DPA-CI for rapid and convenient detection of the highly toxic phosgene. DPA-CI was developed by incorporated a diphenylamine (DPA) and a 2-imine-3-benzo[d]imidazole as the enhanced push-pull electronic structure into the coumarin fluorophore matrix. The sensor DPA-CI towards phosgene sensing exhibited both visible colorimetric and ratiometric fluorescent color change in solution and in gaseous conditions with TICT and AIE mechanism respectively, which can be easily distinguished by using the naked eye. Also, the sensor DPA-CI showed splendid sensing performance such as excellent selectivity, rapid response (less than 8 s in THF and 2 min in gaseous condition), and fair sensitivity (limit of detection less than 0.11 ppm in gaseous condition and 0.27 μM in solution). The design strategy based on enhanced push-pull electronic structure with AIE and TICT properties will be helpful to construct a solid optical sensor with excellent potential application prospects for portable and visual sensing of gaseous phosgene through distinct color and ratiometric fluorescence change by the naked eyes.

Sensitive and Visual Detection of Phosgene by a TICT-Based BODIPY Dye with 8-(o-Hydroxy)aniline as the Active Site

Phosgene and its substitutes (diphosgene and triphosgene) are widely utilized as chemical industrial materials and chemical warfare agents and pose a threat to public health and environmental safety due to their extreme toxicity. Research efforts have been directed to develop selective and sensitive detection methods for phosgene and its substitutes. In this paper, we have prepared two BODIPY-based fluorescent probes, o-Pah and o-Pha, which are two isomers with different active sites, ortho-aminohydroxy (3',4' or 4',3') phenyls at meso position of BODIPY, and compared their sensing performance toward triphosgene. The probe with o-(4'-amino-3'-hydroxyl), o-Pha, exhibits better sensing performance over the o-(3'-amino-4'-hydroxyl), o-Pah, for instance, a lower limit of detection (LOD) (0.34 nm vs. 1.2 nm), and more rapid response (10 s vs. 200 s). Furthermore, based on the above comparative studies, a red-fluorescence probe o-Phae has been constructed through extending 3,5-conjugation of o-Pha. The probe o-Phae displays rapid response (60 s), high sensitivity to triphosgene (LOD=0.88 nm), and high selectivity for triphosgene over relevant analytes including nitric oxide. Finally, a facile test strip for phosgene was fabricated by immobilizing o-Phae in a polyethylene oxide membrane for sensitive (<2 ppm) and selective detection of phosgene in the gas phase.

A facile dual-function fluorescent probe for detection of phosgene and nitrite and its applications in portable chemosensor analysis and food analysis

Due to the potential threats of phosgene and nitrite to public health and safety, in this work, we first proposed the application of a facile dual-function fluorescent probe 2-(1H-Benzimidazol-2-yl)Aniline (BMA) for the detection of phosgene and nitrite in different solvent environments. BMA had fast response (1 min), high selectivity and sensitivity (the limit of detection was 1.27 nM) to phosgene in CH₃CN solution (containing 10% DMSO), which manifested as a ratiometric fluorescent mode from 416 nm to 480 nm. The response of BMA to nitrite in HCl solution (pH = 1, containing 10% CH₃CN) was also highly selective and sensitive (the limit of detection was 60.63 nM), which shown as a turn-off fluorescent mode at 485 nm. In addition, two portable chemosensors (BMA-loaded TLC plates and test strips) had also been successfully manufactured for the detection of phosgene in the gas phase and nitrite in solution, which displayed good responses. Most importantly, BMA had also been successfully used for detection of nitrite in food samples, and a good recovery (88.5%-107.2%) was obtained by adding standard sodium nitrite.

Optical detection of sulfur mustard contaminated surfaces based on a sprayable fluorescent probe

A water-based sprayable functional polymer was immobilized with the fluorescent probe DPXT and was used as a chemo-sensor for rapid localization of surface contamination by sulfur mustard.

An amino-substituted 2-(2′-hydroxyphenyl)benzimidazole for the fluorescent detection of phosgene based on an ESIPT mechanism

In this work, an ESIPT-based fluorescence probe, 5′-amino-2-(2′-hydroxyphenyl)benzimidazole (P1), was synthesized and explored for the ratiometric detection of phosgene. Compared to 2-(2′-hydroxyphenyl)benzimidazole (HBI), P1 exhibits high sensitivity (LoD = 5.3 nM) and selectivity toward phosgene with the introduction of the amine group. Furthermore, simple P1 loaded test papers are manufactured and display selective fluorescent detection of phosgene in the gas phase.

An easily prepared phosgene probe, 5′-amino-2-(2′-hydroxyphenyl)benzimidazole (P1), is designed and studied. Based on ESIPT mechanism, P1 exhibits ratiometric, sensitive and selective detection of phosgene both in solution and gas phase.

Second-Generation Phosgene and Diphosgene Detection Tube

We have developed a second-generation detection tube for colorimetric and fluorescence detection of phosgene and diphosgene in air. The tube is packed with pellets made of a mixture of microcrystalline cellulose and magnesium aluminum metasilicate treated with a suitable monoterpene (camphor, menthol) to increase porosity and specific surface area. We impregnated the pellets with a specific o-phenylenediamine-pyronin (PY-OPD) based reagent. The detector with this novel indication charge enables phosgene or diphosgene to be selectively and sensitively detected at concentrations lower than as would those posing acute health risk. Owing to the analytical colorimetric and, at the same time, fluorescence signal, the detector is very robust while featuring good sensitivity and variability. The colorimetric limits of detection were 0.3 mg/m3 (tristimulus colorimeter), resp. 5 mg/m3 (with the naked eye), fluorescence detection limits of 0.3 mg/m3 (with the naked eye), all at an air sample volume of 1 dm3. The response was practically immediate, acid vapors and gases, or diethyl chlorophosphate as a simulant of nerve warfare chemical agents, were disruptive.

Bright Luminescent Carbon Dots for Multifunctional Selective Sensing and Imaging Applications in Living Cells

Luminescent carbon dots (CDs) have become attractive materials because of their superior photophysical properties and various potential applications. However, most of the formerly developed CDs only have strong blue emission, which limits their further applications, particularly in bioimaging. Herein luminescent CDs have been successfully synthesized via a one-pot solvothermal process using 4-bromoaniline and ethylenediamine as starting materials. The luminescent CDs emit strong green fluorescence with high quantum yield as well as excellent biocompatibility and biolabeling potentials. At first, the luminescent CDs exhibited high selectivity for phosgene with a turn-off fluorescence detection. The limit of detection was 81 nM, which is sensitive for the determination of phosgene over other competing toxic pollutants. In addition, the luminescent CDs have shown a three-state "on-off-on" emission with the stepwise addition of Ag⁺ and cysteine (Cys). Luminescent CDs show fluorescence quenching by Ag⁺ and fluorescence regaining with further addition of Cys, with lower detection limits of 3.9 μM (Ag⁺) and 3.4 μM (Cys), respectively. The luminescent CDs were utilized to obtain a clear fingerprint. During the drying process, the coffee ring effect and electrostatic interaction between the positive surface charge of amine-functionalized CDs and negatively charged fingerprint residues facilitate the formation of clear fingerprints on different platforms.

Sensitive and selective detection of phosgene with a bis-(1H-benzimidazol-2-yl)-based turn-on fluorescent probe in the solution and gas phase

As one of the chemical weapons in World War I, phosgene (COCl2) is an extremely toxic gas. Due to wide applications in industrial production, phosgene can easily leak inadvertently and poses a serious threat to the environment and human health and safety. In this study, we report for the first time a new fluorescent probe (bis-(1H-benzimidazol-2-yl)-methanone) for the rapid detection of phosgene. The probe is based on the easily prepared bis-(1H-benzimidazol-2-yl), which can quickly combine with phosgene to obtain a six-membered cyclic carbamylation product showing fluorescence turn-on. The combination of phosgene caused the maximum absorption of the probe shifting from 361 nm to 373 nm, which showed a color change from colorless to yellow under visible light. Meanwhile, a strong fluorescence emission peak appeared at 428 nm, which showed change from no fluorescence to blue-violet fluorescence under a UV lamp (365 nm). The response of the probe towards phosgene is fast (within 30 s), highly selective and sensitive (the detection limit in solution being 3.3 nM). Furthermore, the portable test strips manufactured using the probe can conveniently perform visual and fluorescence detection of phosgene in the gas phase.

A coumarin based fluorescent chemodosimeter for phosgene gas detection instantaneously in solution and the gas phase

A coumarin based compound, 7-(diethylamino)-2-oxo-2H-chromene-3-carbaldehyde oxime, acts as a selective fluorescent chemodosimeter for phosgene gas in solution and as well as in the gas phase.

Rapid naked-eye colorimetric detection of gaseous alkaline analytes using rhodamine B hydrazone-coated silica strips

Development of rhodamine B hydrazone-coated silica strips for rapid detection of alkaline vapors by the naked-eye or using a smartphone camera.

Selectively Light-up Detection of Phosgene with an Aggregation-Induced Emission-Based Fluorescent Sensor

Phosgene, a widely used but highly toxic substance, may pose a serious risk to public safety and health because of the potential abuse and possible accidental leakage. Consequently, it is of great significance to develop a rapid, reliable, and sensitive detection method for this noxious agent. In this work, an aggregation-induced emission-based sensor, 3,6-bis(1,2,2-triphenylvinyl)benzene-1,2-diamine (DATPE), has been rationally designed for detecting phosgene by conjugation of o-phenylenediamine (OPD) core as the reactive recognition moiety decorated with two peripheral triphenylethylene (TPE) units. A light-up fluorescence response is achieved by the fast cyclization reaction of OPD part and phosgene along with the formation of 2-imidazolidinone ring, thus inhibiting the intramolecular charge transfer quenching process in the sensor. Moreover, an easy-to-use test paper with DATPE is fabricated for onsite visual detection of phosgene in the gas phase even at a concentration of as low as 0.1 ppm.

Novel cyanide supramolecular fluorescent chemosensor constructed from a quinoline hydrazone functionalized-pillar[5]arene

Herein, we report a simple and novel approach for the design of fluorescent chemosensor through the self-assembly of functionalized monomer molecules. According to these approach, a novel supramolecular fluorescent chemosensor (SPMS) was successfully constructed by self-assembly of a quinoline hydrazone functionalized pillar[5]arene monomer PM. Interestingly, upon the addition of CN^-, the solution of SPMS instantly shows dramatic fluorescent enhancement and emitting bright blue emission. Meanwhile, the fluorescence quantum yields show distinct increase from 0.0582 of SPMS to 0.3952 of SPMS + CN^-. The detection limit (LOD) of SPMS for CN^- is 9.70 × 10^-8 M, which indicated high sensitivity. Moreover, the SPMS is selective for CN^- even in the presence of other anions, the fluorescent detection process of SPMS for CN^- was not interfered by other competitive anions (F^-, Cl^-, Br^-, I^-, N₃^-, OH^-, SCN^-, HSO₄^-, AcO^-, H₂PO₄^- and ClO₄^-). Notably, in the CN^- sensing process, the self-assembly structure of the supramolecular chemosensor SPMS didn't show any disassembly. This work provides a novel approach for instant detection of CN^- through a self-assembled supramolecular fluorescent chemosensor in aqueous system. Moreover, the test strips based on SPMS were fabricated, which could serve as convenient and efficient CN^- test kits.

An ESIPT-based fluorescent probe for the detection of phosgene in the solution and gas phases

Phosgene is a highly toxic gas that poses a serious threat to public health and safety. Herein, we describe the preparation of a ratiometric fluorescence probe (Pi) bearing hydroxyl and imidazole moieties as recognition sites, and employ it for the excited-state intramolecular proton transfer-based (ESIPT-based) detection of phosgene. It is the first time that hydroxyl and imidazole have been exploited as recognition sites for phosgene. In the presence of phosgene, Pi undergoes sequential nucleophilic substitution and cyclization reactions that facilitate a rapid response, high selectivity, and excellent sensitivity (detection limit = 0.14 μM). The sensing mechanism was verified by ¹H NMR spectroscopy and high-resolution mass spectrometry. Furthermore, we fabricated a fluorescent test strip (FTS-Pi) for the detection of phosgene in the gas phase that undergoes a fluorescence color change, from green to blue, under 365 nm UV light in the presence of phosgene, which is easily observed with the naked eye.

Graphene Nanobuds: A New Second-Generation Phosgene Sensor with Ultralow Detection Limit in Aqueous Solution

Selective and sensitive detection of highly toxic chemicals by a suitable, fast, inexpensive, and trustworthy method is vital due to its serious health threats to humankind and breach of public security caused by unexpected terrorist attacks and industrial accidents. Phosgene or carbonyl dichloride is widely employed in many chemical industries and pharmaceuticals, and in pesticide production, which is extremely toxic by severe (short-term) inhalation exposure. Because of the non-existence of a phosgene sensor in aqueous solution and the immense emphasis gained by nanomaterials, especially carbonaceous materials, augmented attention has been given to the development of a fluorophore-functionalized carbon-based method to detect this noxious substance. In this study, surfactant free 1,8-diaminonaphthalene (DAN)-functionalized graphene quantum dots (DAN-GQDs) were prepared to detect phosgene in aqueous solution. The FESEM (field emission scanning electron microscopy) and HRTEM (high-resolution transmission electron microscopy) analyses confirm the as-prepared DAN-GQD morphology as nanobuds (NBs) with an average diameter of ca. 35-40 nm. The crystalline nature, elemental composition, and chemical state of DAN-GQDs were analyzed by standard physiochemical techniques. The edge-termination at the carboxyl functional group of GQDs with DAN was examined by XPS, Raman, FT-IR, and ¹H NMR spectroscopy analyses. The aqueous solution of DAN-GQDs (4.89 × 10^-9 M) exhibits a strong emission peak at 423 nm upon excitation at 328 nm. The addition of the phosgene molecule (0 → 88 μL) quenches the initial fluorescence intensity of DAN-GQDs (Φ_F 53.6 → 34.6%) through the formation of a stable six-membered cyclized product. The DAN-GQDs displayed excellent selectivity and sensitivity for phosgene ( K_a = 3.84 × 10² M^-1 and LoD (limit of detection) = 2.26 ppb) over other competing toxic pollutants in water. The time-resolved fluorescence analysis confirms that the quenching of DAN-GQDs follows nonradiative relaxation of excited electrons. Furthermore, bioimaging experiments of phosgene in living human breast cancer (HeLa) cells and cell viability test successfully demonstrated the practicability of DAN-GQDs.

Fluorescent Chemosensor for Dual-Channel Discrimination between Phosgene and Triphosgene

As highly toxic and accessible chemical reagents, phosgene and triphosgene have become a serious threat to public safety. So, it is highly desirable to develop facile methods to detect and recognize them. In this article, a novel fluorescent chemosensor, Phos-4, has been constructed with 1,8-naphthalimide as the fluorophore and 2-(2-aminophenyl)imidazol as the recognition sites for discrimination between phosgene and triphosgene in a dual-channel mode for the first time. Owing to the difference in electrophilicity between chlorocarbonyl and trichloromethoxycarbonyl, the sensing reaction of Phos-4 with phosgene undergoes two carbamylations to afford a cyclic product with green fluorescence, and only one carbamylation occurs for triphosgene to form a noncyclic product with blue fluorescence. The sensor Phos-4 exhibits high sensitivity (the limit of detection, 3.2 nM, for phosgene, and 1.9 nM, for triphosgene) and high selectivity in solutions. Furthermore, facile test papers containing Phos-4-embedded nanofibrous membrane have been fabricated by the electrospinning technology. The test papers can provide visual and selective detection of phosgene with a lower limit of detection (42 ppb) and a faster response (≤10 s) in the gas phase over those in solutions. The test paper with Phos-4 is promising to be a practical detection tool of gaseous phosgene.

A potent colorimetric and fluorogenic phosgene probe based on dual photophysical processes: PET attenuation and ICT reversal

An easily obtainable pyrene benzothiazole platform for the selective detection of hazardous analyte phosgene simply via quaternization of the benzothiazole N atom, which precludes any ring opening or closure.

Phosgene invites selective switch-on fluorescence at ppm concentrations in a Betti base by hindering 2-way PET

Phosgene ignites a decisive and immediate fluorescence response in a simple Betti base.

An Optical Dosimeter for the Selective Detection of Gaseous Phosgene with Ultralow Detection Limit

We present here a cheap, fast, and highly selective dosimeter for the colorimetric detection of gaseous phosgene with an ultralow detection limit. The disposable device is based on Harrison's reagent supported into a porous nanocrystalline TiO₂ matrix film. We exposed the films to phosgene streams while the absorbance was monitored by an optic fiber in a gas chamber. The pronounced spectral changes were unaffected by humidity and oxygen and permitted us to use the response rate at 464 nm as a very stable calibration signal for quantitative analysis purposes. The use of a specific sensing reaction guaranteed a very high selectivity of the device even against saturated vapors of primary interferences like halide gases and other oxidizing and volatile agents. With this simple method, whose response is compatible with affordable and efficient miniature LED-photodiode devices, we reach an ultralow limit of detection well below the ppm level.

Readily prepared iminocoumarin for rapid, colorimetric and ratiometric fluorescent detection of phosgene

In this paper, a new colorimetric and ratiometric fluorescent probe for the rapid detection of phosgene is reported. This probe is based on a readily prepared and highly fluorescent iminocoumarin, which reacts rapidly with phosgene to form a cyclic carbamate product to produce, distinctive colorimetric and ratiometric fluorescent signal changes. The detection of phosgene with this probe is fast (complete within 2 min), highly selective and sensitive with a detection limit of 27 nM in solution. Moreover, this probe can be used to prepare easy-to-use paper test strips for convenient visual and fluorescent detection of phosgene gas even at a concentration of 0.1 mg/L. Overall, this work provides a very promising dual colorimetric and ratiometric fluorescent probe for rapid and sensitive detection of phosgene both in solution and in the gas phase.

Colorimetric and Fluorescent Detecting Phosgene by a Second-Generation Chemosensor

Because of the current shortage of first-generation phosgene sensors, increased attention has been given to the development of fluorescent and colorimetric based methods for detecting this toxic substance. In an effort focusing on this issue, we designed the new, second-generation phosgene chemosensor 1 and demonstrated that it undergoes a ring-opening reaction with phosgene in association with color and fluorescent changes with a detection limit of 3.2 ppb. Notably, in comparison with the first-generation sensor RB-OPD, 1 not only undergoes a much faster response toward phosgene with an overall response time within 2 min, but it also generates no byproducts during the sensing process. Finally, sensor 1 embedded nanofibers were successfully fabricated and used for accurate and sensitive detection of phosgene.

Recent Advances in the Development of Chromophore-Based Chemosensors for Nerve Agents and Phosgene

The extreme toxicity and ready accessibility of nerve agents and phosgene has caused an increase in the demand to develop effective systems for the detection of these substances. Among the traditional platforms utilized for this purpose, chemosensors including surface acoustic wave (SAW) sensors, enzymes, carbon nanotubes, nanoparticles, and chromophore based sensors have attracted increasing attention. In this review, we describe in a comprehensive manner recent progress that has been made on the development of chromophore-based chemosensors for detecting nerve agents (mimic) and phosgene. This review comprises two sections focusing on studies of the development of chemosensors for nerve agents (mimic) and phosgene. In each of the sections, the discussion follows a format which concentrates on different reaction sites/mechanisms involved in the sensing processes. Finally, chemosensors uncovered in these efforts are compared with those based on other sensing methods and challenges facing the design of more effective chemosensors for the detection of nerve agents (mimic) and phosgene are discussed.

A ratiometric fluorescent paper sensor for consecutive color change-based visual determination of blood glucose in serum

The ratiometric fluorescent paper sensor with a dosage-sensitive allochromatic capability for the visual determination of blood glucose in human serum.