Electrode-modified block copoly-ionic liquid boosting the CO2 reduction toward CO in water-based media

Coupling polymer and ionic liquids with electrodes for catalysis is a promising tool for optimization of electrocatalytic CO₂ reduction reaction (CO₂RR). Here, block copolymer ionic liquids BCPILs were synthesized via controlled radical polymerization and nucleophilic post-substitution to introduce imidazole moieties. We show that, thanks to these PIL functionalities, the BCPIL/Re@HPC/GDL electrode can keep the selectivity toward CO when a higher amount of water is present in the electrolyte than the raw Re@HPC/GDL system. Our results help to understand the development of solid-state ionic liquids for enhanced CO₂RR in water-based electrolyte.

Solution-State Long-Range Molecular Ordering in Poly(3-hexylthiophene)

A blend of poly(3-hexylthiophene) (P3HT) and poly(n-hexyl isocyanate-block-2-vinylpyridine) (PHIC-b-P2VP) in a common solvent shows the formation of long-range (micrometer-scale) nanowires of P3HT through hydrophobic interactions between the hexyl arms of P3HT and PHIC in a parallel way, which increase the planarity that leads to the generation of vibration bands with a lower free exciton bandwidth (W = 67 meV) in the solution state, which is further decreased to 9 meV after 48 h annealing of the blend film. The resulting nanowires of the P3HT show a 100-fold increase in current in comparison to pristine P3HT.

Recent advances on porous interfaces for biomedical applications

Porous structures on solid surfaces prepared artificially through the water droplet template method have the features of easy operation, low cost and self-removal of templates, and thus are widely applied in the fields of medicine, biomedicine, adsorption, catalysis, and separation, optical and electronic materials. Due to their tunable dimensions, abundant selection of materials, mechanical stability, high porosity, and enlarged pore surface, the formed porous interfaces show specific significance in bio-related systems. In this study, recent achievements related to applications of porous interfaces and a focus into biological and medical-related systems are summarized. The discussion involves the preparation of porous interfaces, and porous interface-induced cell behaviors including culture, growth, proliferation, adhesion, and differentiation of cells. The inhibitory effect of bacteria and separated features of microorganisms supported by porous interfaces, the immobilization of biomolecules related to proteins, DNA and enzymes, and the controllable drug delivery are also discussed. The summary of recent advances pointed out in the study, are suggestive of insights for motivating unique potential applications including their extension to porous interfaces in biomedical materials.

Core@Corona Functional Nanoparticle-Driven Rod-Coil Diblock Copolymer Self-Assembly

Herein, a novel strategy to overcome the influence of π-π stacking on the rod-coil copolymer organization is reported. A diblock copolymer poly(3-hexylthiophene)-block-poly(ethylene glycol methyl ether methacrylate) (P3HT-b-PEGMA) was synthesized by the Huisgen cycloaddition, so-called "click chemistry", combining the PEGMA and P3HT blocks synthesized by atom transfer radical polymerization and Kumada catalyst transfer polymerization, respectively. Using a dip-coating process, we controlled the original film organization of the diblock copolymer by the crystallization of the P3HT block via π-π stacking. The morphology of the P3HT-b-PEGMA films was influenced by the incorporation of gold nanoparticles (GNPs) coated by poly(ethylene glycol) ligands. Indeed, the crystalline structuration of the P3HT sequence was counterbalanced by the addition in the film of gold nanoparticles finely localized within the copolymer PEGMA matrix. Transmission electron microscopy and time-of-flight secondary ion mass spectrometry analysis validated the GNP homogeneous localization into the compatible PEGMA phase. Differential scanning calorimetry showed the rod block crystallization disruption. A morphological transition of the self-assembly is observed by atomic force microscopy from P3HT fibrils into out-of-plane cylinders driven by the nanophase segregation.

A Simple Route to Hierarchical Rings of Diblock Copolymer Micelles

A hierarchically assembled necklace composed of amphiphilic diblock copolymer micelles is exquisitely produced by capitalizing on two concurrent self-assembly processes at different scales (i.e., "breath figure" strategy of diblock copolymer micelles solution evaporating in humid air to yield rings at the microscopic scale in conjunction with self-assembly of diblock copolymer micelles within individual ring at the nanometer scale). Intriguingly, hierarchical rings of diblock copolymer micelles comprising gold precursors or fluorescent dyes can also be crafted using this strategy. Upon exposure to hydrophilic block-selective solvent, core-corona inversion of micelles within the microscopic rings occurs. In contrast, such inversion is inhibited when the micelles are impregnated by gold precursors. This simple yet effective strategy for engineering diblock copolymer micelles may be extended to produce hierarchically assembled structures consisting of other functional block copolymers (e.g., stimuli-responsive block copolymer) and nanocrystals (e.g., semiconducting, magnetic, ferroelectric, etc.) with unique catalytic, magnetic, ferroelectric, optical, electronic, and optoelectronic properties.

In Search of a Green Process: Polymeric Films with Ordered Arrays via a Water Droplet Technique

As an efficient technique for the preparation of polymeric hexagonal orderly arrays, the breath figure (BF) process has opened a modern avenue for a bottom-up fabrication method for more than two decades. Through the use of the water vapor condensation on the solution surface, the water droplets will hexagonally pack into ordered arrays, acting as a template for controlling the regular micro patterns of polymeric films. Comparing to the top-down techniques, such as lithography or chemical etching, the use of water vapor as the template provides a simple fabrication process with sustainability. However, using highly hazardous solvents such as chloroform, carbon disulfide (CS2), benzene, dichloromethane, etc., to dissolve polymers might hinder the development toward green processes based on this technique. In this review, we will touch upon the contemporary techniques of the BF process, including its up-to-date applications first. More importantly, the search of greener processes along with less hazardous solvents for the possibility of a more sustainable BF process is the focal point of this review.

Direct formation of hydrophilic honeycomb film by self-assembly in breath figure templating of hydrophobic polylacticacid/ionic surfactant complexes

Honeycomb-patterned porous films with good surface wettability have great potential applications in various areas. However, hydrophilic honeycomb films are difficult to obtain using the direct self-assembly of pure (co)polymers. Thus, additional and special treatments are required to improve film wettability, which makes the procedure complicated and difficult to access. In this study, a facile way to prepare hydrophilic honeycomb-structured porous films is proposed that uses the direct self-assembly of complexes of biocompatible hydrophobic poly(l-lactic acid) and dodecyltrimethylammonium chloride by breath figure templating. The addition of ionic surfactant not only improves film quality but also confers good wettability. The obtained hydrophilic pore arrays were found to effectively promote cell attachment. Such a hydrophilic honeycomb-patterned porous film could find potential applications where pore wetting is required, including tissue engineering, lithography, and nanoparticle embedding.

Controlled ATRP Synthesis of Novel Linear-Dendritic Block Copolymers and Their Directed Self-Assembly in Breath Figure Arrays

Herein, we report the formation and characterization of novel amphiphilic linear-dendritic block copolymers (LDBCs) composed of hydrophilic dendritic poly(ether-ester), PEE, blocks and hydrophobic linear poly(styrene), PSt. The LDBCs are synthesized via controlled atom transfer radical polymerization (ATRP) initiated by a PEE macroinitiator. The copolymers formed have narrow molecular mass distributions and are designated as LGn-PSt Mn, in which LG represents the PEE fragment, n denotes the generation of the dendron (n = 1⁻3), and Mn refers to the average molecular mass of the LDBC (Mn = 3.5⁻68 kDa). The obtained LDBCs are utilized to fabricate honeycomb films by a static "breath figure" (BF) technique. The copolymer composition strongly affects the film morphology. LDBCs bearing acetonide dendron end groups produce honeycomb films when the PEE fraction is lower than 20%. Pore uniformity increases as the PEE content decreases. For LDBCs with hydroxyl end groups, only the first generation LDBCs yield BF films, but with a significantly smaller pore size (0.23 μm vs. 1⁻2 μm, respectively). Although higher generation LDBCs with free hydroxyl end groups fail to generate honeycomb films by themselves, the use of a cosolvent or addition of homo PSt leads to BF films with a controllable pore size (3.7⁻0.42 μm), depending on the LDBC content. Palladium complexes within the two triazole groups in each of the dendron's branching moieties can also fine-tune the morphology of the BF films.

CO2-Driven reversible wettability in a reactive hierarchically patterned bio-inspired honeycomb film

A triple structured honeycomb film is fabricated through block copolymer directed self-assembly in “Breath Figure” templating as a clickable patterned platform to enhance its reversible surface wettability between hydrophobicity and hydrophilicity upon a biological CO₂ trigger.

Hierarchically organized honeycomb films through block copolymer directed self-assembly in "breath figure" templating and soft microwave-triggered annealing

Hierarchically organized polymer films are produced with a high level of order from the combination of block copolymer nanophase segregation, "breath figure" methodology and microwave irradiation. A block copolymer based on poly(methyl methacrylate) and poly(n-butylacrylate) featuring cylindrical nanopatterns is involved in the "breath figure" process to create a microporous honeycomb structure. These films are submitted to microwave annealing to enhance the degree of ordering of the nano-segregation without the destruction of the honeycomb microstructure, which is not possible by classical thermal or solvent annealing. Ellipsometry, optical and atomic force microscopy are used to study three key parameters; the substrate nature, the film thickness and the microwave irradiation power. The silicon wafer is the substrate of choice to efficiently act as the heating transfer element and 60 seconds at 10 watts are enough to nicely order the 1 μm thick copolymer films. These conditions are eventually applied on hierarchically organized polymer films to obtain a hexagonal array of 100 nm deep holes within a matrix of perpendicularly aligned nano-cylinders.

Reactive nano-patterns in triple structured bio-inspired honeycomb films as a clickable platform

Towards unprecedented triple structured bio-inspired honeycomb film by selfassembly of a functional block copolymer during breath figure templating as a nano-patterned clickable platform.