High-Efficiency Photocatalytic Oxidation of Benzyl Alcohol by NH2-UiO-66-(Indole-2,3-Dione)-Fe

The photocatalytic oxidation of biomass-derived benzyl alcohol provides a promising way for the synthesis of benzoic acid, which is an important intermediate with wide applications. To improve the efficiency of photocatalytic benzyl alcohol oxidation to benzoic acid is of great interest. In this work, we propose the utilization of NH2-UiO-66-ID-Fe catalyst for photocatalytic oxidation of benzyl alcohol to benzoic acid, where NH2-UiO-66 is a typically used metal-organic framework, ID is indole-2,3-dione (ID) that has biocompatibility, light absorption property and can be covalently combined with amino-functionalized substances. The NH2-UiO-66-ID-Fe catalyst exhibits improved light absorption and photo-generated electron-hole separation ability compared with NH2-UiO-66. The photocatalytic performance of NH2-UiO-66-ID-Fe was examined for the oxidation of bio-based benzyl alcohol under mild conditions of air atmosphere, room temperature and no additive or additional oxidant involved. The results show that the conversion of benzyl alcohol and the selectivity to benzoic acid could both reach over 99 % in 6 h, and the generation rate of benzoic acid per gram of catalyst is 3.36 mmol g-1 h-1. The reaction mechanism was detected by radical trapping method and in situ electron paramagnetic resonance. This study presents an efficient and environmentally benign avenue for the synthesis of carboxylic acid compounds.

Half-Sandwich Iridium Complexes: A Recyclable and Stable Catalyst for Dehydrogenation of Alcohols to Carboxylic Acids

A series of acylhydrazone-based N,N-chelate half-sandwich iridium complexes have been synthesized through a facile route in good yields. The dehydrogenation of a series of aromatic and aliphatic primary alcohols to corresponding carboxylic acids has been accomplished catalyzed by the prepared air stable iridium complexes under mild reaction conditions. Carboxylic acids were obtained in high yields under open flask condition with broad substrates and good tolerance to sensitive functional groups. Such a half-sandwich iridium catalyst system exhibited high catalytic activity and stability, and a high TOF of 316.7 h-1 could be achieved with a catalyst loading as low as 0.05 mol %. Furthermore, the sustainable catalyst could be reused at least five times without obviously losing its activity, highlighting its potential application in industry. Molecular structure of iridium complex 1 was confirmed by single-crystal X-ray analysis.

A sustainable strategic approach for N-alkylation of amines with activation of alcohols triggered via a hydrogen auto-transfer reaction using a Pd(II) complex: evidence for metal-ligand cooperativity

This work describes a new well-defined, air-stable, phosphine free palladium(II) [Pd(L)Cl] (1) catalyst. This catalyst was utilized for N-alkylation of amines and indole synthesis where H2O was found to be the by-product. A broad range of aromatic amines were alkylated using this homogeneous catalyst with a catalyst loading of 0.1 mol%. Greener aromatic and aliphatic primary alcohols were utilized and a hydrogen auto-transfer strategy via a metal-ligand cooperative approach was investigated. The precursor of the antihistamine-containing drug molecule tripelennamine was synthesized on a gram scale for large-scale applicability of the current synthetic methodology. A number of control experiments were performed to investigate the possible reaction pathway and the outcomes of these experiments indicated the azo-chromophore as a hydrogen reservoir during the catalytic cycle.

Ruthenium Complexes with N-Bound 2-Pyridonato Ligand as O-Donors: A New Synthetic Approach and the Effect on Reactivity

In this study, Ru complexes [(η6-p-cymene)RuX(2-{(2,6-iPr2-C6H3)N=CH}-C5H3N-6-(O))] (3: X=Cl; 4: X=I) were prepared with N-bound 2-pyridonato ligand by thermal base-free MeX elimination from ionic N,N-chelated Ru complexes [(η6-p-cymene)RuX(κ2-L1)](X) (1: X=Cl; 2: X=I; L1={2-[(2,6-iPr2-C6H3)N=CH]-6-(OMe)C5H3N}). The Ru complex 3 was used as O-donor for Lewis (LA) or Brönsted acids. The reactions of 3 with SnCl2, Ph3SnCl, ZnCl2 or HCl provided [(η6-p-cymene)Ru(SnCl3)(2-{(2,6-iPr2-C6H3)N=CH}-C5H3N-6-(O→SnCl2)] (6), [(η6-p-cymene)RuCl(2-{(2,6-iPr2-C6H3)N=CH}-C5H3N-6-(O→SnPh3Cl)] (7), and [(η6-p-cymene)RuCl(2-{(2,6-iPr2-C6H3)N=CH}-C5H3N-6-(O→)]2(μ-ZnCl2) (8) and [(η6-p-cymene)RuCl(2-{(2,6-iPr2-C6H3)N=CH}-C5H3N-6-(OH)}](Cl) (9). The easy conversion of the 2-pyridonato ligand in 3 to its 2-hydroxypyridine in 9 evoked testing of 3 and 4 as potential catalysts in base-free transfer-hydrogenation of ketones.

Pyrazole-pyridine-pyrazole (NNN) ruthenium(II) complex catalyzed acceptorless dehydrogenation of alcohols to aldehydes

A new series of cationic ruthenium(II) complexes, [RuCl(PPh3)2(κ3-NNN-L1)]Cl (1), [RuH(PPh3)2(κ3-NNN-L2)]Cl (2), and [RuH(PPh3)2(κ3-NNN-L3)]Cl (3), bearing a 2,6-bis (1-R-5-methyl-pyrazol-3-yl) pyridine ligand (L1: R = H, L2: R = C6H4-p-CF3, L3: R = C6H4-p-OCH3), were synthesized and characterized with NMR, HRMS, and single-crystal X-ray diffraction. Their catalytic application was investigated in the acceptorless dehydrogenation (AD) of primary alcohols. Complex 1 outperformed 2 and 3 in terms of the selectivity towards the aldehydes, and provided the aldehydes with a yield of up to 99%, with good functional group tolerance under mild conditions. In addition, the only by-product of the reaction was dihydrogen, which can be collected as clean energy, and the reaction meets the requirements of environment-friendly chemistry. Complex 1 also proved to be a promising catalyst in the sequential AD/condensation reaction between the primary and secondary alcohols, affording α,β-unsaturated ketones in moderate to good selectivity.

Oxidation of Organic Compounds Using Water as the Oxidant with H2 Liberation Catalyzed by Molecular Metal Complexes

Oxidation reactions of organic compounds play a central role in both industrial chemical and material synthesis as well as in fine chemical and pharmaceutical synthesis. While traditional laboratory-scale oxidative syntheses have relied on the use of strong oxidizers, modern large-scale oxidation processes preferentially utilize air or pure O₂ as an oxidant, with other oxidants such as hydrogen peroxide, nitric acid, and aqueous chlorine solution also being used in some processes. The use of molecular oxygen or air as an oxidant has been very attractive in recent decades because of the abundance of air and the lack of wasteful byproduct generation. Nevertheless, the use of high-pressure air or, in particular, pure oxygen can lead to serious safety concerns with improper handling and also necessitates the use of sophisticated high-pressure reactors for the processes.Several research groups, including ours, have investigated in recent times the possibility of carrying out catalytic oxidation reactions using water as the formal oxidant, with no added conventional oxidants. Along with the abundant availability of water, these processes also generate dihydrogen gas as the reaction coproduct, which is a highly valuable fuel. Several well-defined molecular metal complexes have been reported in recent years to catalyze these unusual oxidative reactions with water. A ruthenium bipyridine-based PNN pincer complex was reported by us to catalyze the oxidation of primary alcohols to carboxylate salts with alkaline water along with H₂ liberation, followed by reports by other groups using other complexes as catalysts. At the same time, ruthenium-, iridium-, and rhodium-based complexes have been reported to catalyze aldehyde oxidation to carboxylic acids using water. Our group has combined the catalytic aqueous alcohol and aldehyde oxidation activity of a ruthenium complex to achieve the oxidation of biomass-derived renewable aldehydes such as furfural and 5-hydroxymethylfurfural (HMF) to furoic acid and furandicarboxylic acid (FDCA), respectively, using alkaline water as the oxidant, liberating H₂. Ruthenium complexes with an acridine-based PNP ligand have also been employed by our group for the catalytic oxidation of amines to the corresponding lactams, or to carboxylic acids via a deaminative route, using water. Similarly, we also reported molecular complexes for the catalytic Markovnikov oxidation of alkenes to ketones using water, similar to Wacker-type oxidation, which, however, does not require any terminal oxidant and produces H₂ as the coproduct. At the same time, the oxidation of enol ethers to the corresponding esters with water has also been reported. This account will highlight these recent advances where water was used as an oxidant to carry out selective oxidation reactions of organic compounds, catalyzed by well-defined molecular complexes, with H₂ liberation. The oxidation of alcohols, aldehydes, amines, alkenes, and enol ethers will be discussed to provide an outlook toward other functional groups' oxidation. We hope that this will aid researchers in devising other oxidative dehydrogenative catalytic systems using water, complementing traditional oxidative processes involving strong oxidants and molecular oxygen.

Tuning the selectivity in iridium-catalyzed acceptorless dehydrogenative coupling of primary alcohols

An acceptorless dehydrogenative coupling of primary alcohols to carboxylic acids/carboxylates, esters, and Guerbet alcohols (via both homo- and cross-β-alkylation of the alcohols) in the presence of an N-heterocyclic carbene iridium(I) catalyst was developed under aerobic conditions. The product selectivity can be easily tuned among the products with a single catalyst through simple modification of the reaction conditions, such as the catalyst and base amounts, the choice of base, and the reaction temperature.

A guide to secondary coordination sphere editing

This tutorial review showcases recent (2015-2021) work describing ligand construction as it relates to the design of secondary coordination spheres (SCSs). Metalloenzymes, for example, utilize SCSs to stabilize reactive substrates, shuttle small molecules, and alter redox properties, promoting functional activity. In the realm of biomimetic chemistry, specific incorporation of SCS residues (e.g., Brønsted or Lewis acid/bases, crown ethers, redox groups etc.) has been shown to be equally critical to function. This contribution illustrates how fundamental advances in organic and inorganic chemistry have been used for the construction of such SCSs. These imaginative contributions have driven exciting findings in many transformations relevant to clean fuel generation, including small molecule (e.g., H⁺, N₂, CO₂, NO_x, O₂) reduction. In most cases, these reactions occur cooperatively, where both metal and ligand are requisite for substrate activation.

Ni(I)-TPA Stabilization by Hydrogen Bond formation on the Second Coordination Sphere: a DFT Characterization

Ni(I) compounds are less common than those of either Ni(0) or Ni(II). Recently, a series of Ni(I) tris(2 pyridylmethyl)amine (TPA) complexes were synthetized through the reduction of Ni(II)-TPA complexes and...

Bulky PNP ligands blocking metal-ligand cooperation allow for isolation of Ru(0), and lead to catalytically active Ru complexes in acceptorless alcohol dehydrogenation

We synthesized two 4Me-PNP ligands which block metal-ligand cooperation (MLC) with the Ru center and compared their Ru complex chemistry to their two traditional analogues used in acceptorless alcohol dehydrogenation catalysis. The corresponding 4Me-PNP complexes, which do not undergo dearomatization upon addition of base, allowed us to obtain rare, albeit unstable, 16 electron mono CO Ru(0) complexes. Reactivity with CO and H 2 allows for stabilization and extensive characterization of bis CO Ru(0) 18 electron and Ru(II) cis and trans dihydride species that were also shown to be capable of C(sp2)-H activation. Reactivity and catalysis are contrasted to non-methylated Ru(II) species, showing that an MLC pathway is not necessary, with dramatic differences in outcomes during catalysis between i Pr and t Bu PNP complexes within each of the 4Me and non-methylated backbone PNP series being observed. Unusual intermediates are characterized in one of the new and one of the traditional complexes, and a common catalysis deactivation pathway was identified.

Hydrogen-bonded nickel(I) complexes

A series of nickel(ii) tris(2-pyridylmethyl)amine (TPA) complexes featuring appended hydrogen bonds (H-bonds) to halides (F, Cl, Br) was synthesized and charcterized. Reduction to the nickel(i) state provided access to an unusual nickel(i) fluoride complex stabilized by H-bonds, enabling structural and spectroscopic characterization.

Direct Oxidation of Primary Alcohols to Carboxylic Acids

Oxidation of primary alcohols to carboxylic acids is a fundamental transformation in organic chemistry, yet despite its simplicity, extensive use, and relationship to pH, it remains a subject of active research for synthetic organic chemists. Since 2013, a great number of new methods have emerged that utilize transition-metal compounds as catalysts for acceptorless dehydrogenation of alcohols to carboxylates. The interest in this reaction is explained by its atom economy, which is in accord with the principles of sustainability and green chemistry. Therefore, the methods for the direct synthesis of carboxylic acids from alcohols is ripe for a modern survey, which we provide in this review.

1 Introduction

2 Thermodynamics of Primary Alcohol Oxidation

3 Oxometalate Oxidation

4 Transfer Dehydrogenation

5 Acceptorless Dehydrogenation

6 Electrochemical Methods

7 Outlook

Recent Advances in Homogeneous Catalysis via Metal–Ligand Cooperation Involving Aromatization and Dearomatization

Recently, an increasing number of metal complex catalysts have been developed to achieve the activation or transformation of substrates based on cooperation between the metal atom and its ligands. In such “cooperative catalysis,” the ligand not only is bound to the metal, where it exerts steric and electronic effects, but also functionally varies its structure during the elementary processes of the catalytic reaction. In this review article, we focus on metal–ligand cooperation involving aromatization and dearomatization of the ligand, thus introducing the newest developments and examples of homogeneous catalytic reactions.

A cyclometalated Ir(III)-NHC complex as a recyclable catalyst for acceptorless dehydrogenation of alcohols to carboxylic acids

In this work, we have synthesized two new [C, C] cyclometalated Ir(iii)-NHC complexes, [IrCp*(C∧C:NHC)Br](1a,b), [Cp* = pentamethylcyclopentadienyl; NHC = (2-flurobenzyl)-1-(4-methoxyphenyl)-1H-imidazoline-2-ylidene (a); (2-flurobenzyl)-1-(4-formylphenyl)-1H-imidazoline-2-ylidene (b)] via intramolecular C-H bond activation. The molecular structure of complex 1a was determined by X-ray single crystal analysis. The catalytic potentials of the complexes were explored for acceptorless dehydrogenation of alcohols to carboxylic acids with concomitant hydrogen gas evolution. Under similar experimental conditions, complex 1a was found to be slightly more efficient than complex 1b. Using 0.1 mol% of complex 1a, good-to-excellent yields of carboxylic acids/carboxylates have been obtained for a wide range of alcohols, both aliphatic and aromatic, including those involving heterocycles, in a short reaction time with a low loading of catalyst. Remarkably, our method can produce benzoic acid from benzyl alcohol on a gram scale with a catalyst-to-substrate ratio as low as 1 : 5000 and exhibit a TON of 4550. Furthermore, the catalyst could be recycled at least three times without losing its activity. A mechanism has been proposed based on controlled experiments and in situ NMR study.

Highly Efficient N-Heterocyclic Carbene/Ruthenium Catalytic Systems for the Acceptorless Dehydrogenation of Alcohols to Carboxylic Acids: Effects of Ancillary and Additional Ligands

The transition-metal-catalyzed alcohol dehydrogenation to carboxylic acids has been identified as an atom-economical and attractive process. Among various catalytic systems, Ru-based systems have been the most accessed and investigated ones. With our growing interest in the discovery of new Ru catalysts comprising N-heterocyclic carbene (NHC) ligands for the dehydrogenative reactions of alcohols, we designed and prepared five NHC/Ru complexes ([Ru]-1–[Ru]-5) bearing different ancillary NHC ligands. Moreover, the effects of ancillary and additional ligands on the alcohol dehydrogenation with KOH were thoroughly explored, followed by the screening of other parameters. Accordingly, a highly active catalytic system, which is composed of [Ru]-5 combined with an additional NHC precursor L5, was discovered, affording a variety of acid products in a highly efficient manner. Gratifyingly, an extremely low Ru loading (125 ppm) and the maximum TOF value until now (4800) were obtained.

Terpyridine-metal complexes: Applications in catalysis and supramolecular chemistry

As an NNN-tridentate ligand, the 2,2':6',2"-terpyridine plays an important role in coordination chemistry. With three coordination sites and low LUMO, terpyridine and its derivatives are one of the typical Pincer ligand and/or non-innocent ligands in transition metal catalysis. Interesting catalytic reactivities have been obtained with these tpy-metal complexes targeting some challenging transformations, such as C-C bond formation and hydrofunctionalization. On the other hand, terpyridine ligands can form "closed-shell" octahedral complexes, which provide a linear and stable linkage in supramolecular chemistry. Numerous supramolecular architectures have been achieved using modified terpyridine ligands including Sierpiński triangles, hexagonal gasket and supramolecular rosettes. This review presents a summary of recent progress regarding transition metal-terpyridine complexes with the focus on their applications in catalysis and supramolecular structure construction. Facile synthesis of terpyridine derivatives is also described. We hope this article can serve to provide some general perspectives of the terpyridine ligand and their applications in coordination chemistry.

Bidentate Ru(ii)-NC complexes as catalysts for the dehydrogenative reaction from primary alcohols to carboxylic acids

Complex 1 is active for alcohol dehydrogenative reactions, and two critical intermediates were isolated and characterized.

Evaluation of attractive interactions in the second coordination sphere of iron complexes containing pendant amines

The ability of different ligands to attract a pendant amine is studied in a series of iron complexes.

Highly active bidentate N-heterocyclic carbene/ruthenium complexes performing dehydrogenative coupling of alcohols and hydroxides in open air

A highly active and robust bidentate NHC/Ru complex for the acceptorless dehydrogenative coupling of alcohols and hydroxides in open air.

Zinc Oxide-Catalyzed Dehydrogenation of Primary Alcohols into Carboxylic Acids

Zinc oxide has been developed as a catalyst for the dehydrogenation of primary alcohols into carboxylic acids and hydrogen gas. The reaction is performed in mesitylene solution in the presence of potassium hydroxide, followed by workup with hydrochloric acid. The transformation can be applied to both benzylic and aliphatic primary alcohols and the catalytically active species was shown to be a homogeneous compound by a hot filtration test. Dialkylzinc and strongly basic zinc salts also catalyze the dehydrogenation with similar results. The mechanism is believed to involve the formation of a zinc alkoxide which degrades into the aldehyde and a zinc hydride. The latter reacts with the alcohol to form hydrogen gas and regenerate the zinc alkoxide. The degradation of a zinc alkoxide into the aldehyde upon heating was confirmed experimentally. The aldehyde can then undergo a Cannizzaro reaction or a Tishchenko reaction, which in the presence of hydroxide leads to the carboxylic acid.

Effects of Ancillary Ligands on Redox and Chemical Properties of Ruthenium Coordinated Azoaromatic Pincer

In this work, the effect of the electronically different ancillary ligands on the overall properties of the Ru^IIL moiety (L = 2,6-bis(phenylazo)pyridine) in heteroleptic complexes of general formula [RuLQCl]^0/+ was investigated. Four different ancillary ligands (Q) with different electronic effects were used to prepare the heteroleptic compounds from the precursor complex, [RuL(CH₃CN)Cl₂] (1); Q = pcp: 2-(4-chloro-phenylazo)pyridine (strong π-acceptor), [2]⁺; bpy: 2,2'-bipyridyl (moderate π-acceptor), [3]⁺; acac^-: acetylacetonate (strong σ-donor), 4; and DTBCat^2-: 3,5-di- tert-butyl catecholate (strong π-donor), 5. The complexes [2]⁺, [3]⁺, 4, and 5 were fully characterized and structurally identified. The electronic structures of these complexes along with their redox partners were elucidated by using a host of physical measurements: nuclear magnetic resonance, cyclic voltammetry, electronic paramagnetic resonance, UV-vis-NIR spectroscopy, and density functional theory. The studies revealed significant effects of the coligands on azo bond lengths of the RuL moiety and their redox behavior. Aerobic alcohol oxidation reactions using these Ru complexes as catalysts were scrutinized. It was found that the catalytic efficiency is primarily controlled by the electronic effect of the coligand. Accordingly, the complex [2]⁺ (containing a strong π-acceptor coligand, pcp) brings about oxidation efficiently, producing 86% of benzaldehyde. In comparison, however, the complexes 4 and 5 (containing electron donating coligand) furnished only 15-20% of benzaldehyde under identical reaction conditions. Investigations of the reaction mechanism suggest that an unstable Ru-H species is formed, which is transformed to a Ru-hydrazo intermediate by H-walking as reported by Hall et al. ( J. Am. Chem. Soc., 2015, 137, 12330). Aerial O₂ regenerates the catalyst via oxidation of the hydrazo intermediate.

Ligand-Based Storage of Protons and Electrons in Dihydrazonopyrrole Complexes of Nickel

A newly developed dihydrazonopyrrole ligand and corresponding Ni complexes have been synthesized and thoroughly characterized. Electrochemical studies and chemical reactivity tests show that these complexes can reversibly store both electrons and protons, or equivalently H-atoms, via ligand-based events. The stored H-atom equivalent can be transferred to small molecules such as acetonitrile or oxygen. Furthermore, this series of complexes can adopt a variety of different coordination modes. In addition to one e^- reactivity, the two e^- electrophilic oxidation of phosphines is also demonstrated. Taken together, these results show that dihydrazonopyrrole complexes represent a geometrically and electronically flexible scaffold for controlling the flow of both electrons and protons.

Incorporation of redox-inactive cations promotes iron catalyzed aerobic C-H oxidation at mild potentials

The synthesis and characterization of the Schiff base complexes Fe(ii) (2M) and Fe(iii)Cl (3M), where M is a K+ or Ba2+ ion incorporated into the ligand, are reported. The Fe(iii/ii) redox potentials are positively shifted by 440 mV (2K) and 640 mV (2Ba) compared to Fe(salen) (salen = N,N'-bis(salicylidene)ethylenediamine), and by 70 mV (3K) and 230 mV (3Ba) compared to Fe(Cl)(salen), which is likely due to an electrostatic effect (electric field) from the cation. The catalytic activity of 3M towards the aerobic oxidation of allylic C-H bonds was explored. Prior studies on iron salen complexes modified through conventional electron-donating or withdrawing substituents found that only the most oxidizing derivatives were competent catalysts. In contrast, the 3M complexes, which are significantly less oxidizing, are both active. Mechanistic studies comparing 3M to Fe(salen) derivatives indicate that the proximal cation contributes to the overall reactivity in the rate determining step. The cationic charge also inhibits oxidative deactivation through formation of the corresponding Fe2-μ-oxo complexes, which were isolated and characterized. This study demonstrates how non-redox active Lewis acidic cations in the secondary coordination sphere can be used to modify redox catalysts in order to operate at milder potentials with a minimal impact on the reactivity, an effect that was unattainable by tuning the catalyst through traditional substituent effects on the ligand.

Phenylamino derivatives of tris(2-pyridylmethyl)amine: hydrogen-bonded peroxodicopper complexes

A series of copper complexes bearing new 6-substituted tris(2-pyridylmethyl)amine ligands (L^R) appended with NH(p-R-C₆H₄) groups (R = H, CF₃, OMe) were prepared. These ligands are electronically tunable (ΔE_1/2 = 160 mV) and Cu^I(L^R)⁺ complexes react with oxygen to form hydrogen bonded (trans-1,2-peroxo)dicopper species.

ortho-Amino group functionalized 2,2′-bipyridine based Ru(ii) complex catalysed alkylation of secondary alcohols, nitriles and amines using alcohols

The catalytic activity of Ru(ii) complexes in sustainable C–C and C–N bond formation is enhanced by using a functionalized 2,2′-bipyridine ligand.

A general and efficient Mn-catalyzed acceptorless dehydrogenative coupling of alcohols with hydroxides into carboxylates

A general and efficient Mn-catalyzed acceptorless dehydrogenative coupling of alcohols with hydroxides into carboxylates has been developed.