Bottom-Up Construction of Rhombic Lamellar CoNi-MOFs for the Electrochemical Sensing of H2S

Lamellar metal-organic frameworks (MOFs) have attracted significant attention in the field of electrochemical sensing due to their abundant open active sites and specific electron conductivity. Herein, by employing a bottom-up synthesis strategy, rhombic lamellar heterometallic CoNi-MOFs with varying thicknesses are constructed. This is achieved by using 4-methylpyridine as a capping agent based on the (4,6)-linked Co2(azpy)2(bptc) (azpy = 4,4'-azopyridine, bptc = 3,3',5,5'-biphenyltetracarboxylic acid) structure with a fsc topology and by introducing Ni species simultaneously. To mitigate sulfur deposition on electrodes, the triple pulse amperometry (TPA) method is employed. Among the synthesized lamellar CoNi-MOFs, lamellar CoNi-MOF-3 with the minimum thickness exhibits an optimal electrochemical sensing performance toward hydrogen sulfide, with a sensitivity of 119.3 μA·mM-1·cm-2 in the linear range of 2-2000 μM. This study pioneers a new approach to the controlled construction and electrochemical activity modification of lamellar MOF materials.

Transformational Modulation of Fluorescence to Room Temperature Phosphorescence in Metal-Organic Frameworks with Flexible C-S-C Bonds

Photoluminescent metal-organic frameworks (MOFs) have been a subject of considerable interest for many years. However, the regulation of excited states of MOFs at the single crystal level remains restricted due to a lack of control methods. The singlet-triplet emissive property can be significantly influenced by crystal conformational distortions. This review introduces an intelligent responsive MOF material, denoted as LIFM-SHL-3a, characterized by flexible C-S-C bonds. LIFM-SHL-3a integrates elastic structural dynamics with fluorescence and room temperature phosphorescence (RTP) modulation under heating conditions. The deformable carbon-sulfur bond essentially propels the distortion of molecular conformation and alters the stacking mode, as illustrated by single-crystal-to-single-crystal transformation detection. The deformation of flexible C-S-C bonds leads to different noncovalent interactions in the crystal system, thereby achieving modulation of the fluorescence (F) and RTP bands. In the final state structure, the ratio of fluorescence is 66.7%, and the ratio of RTP is 32.6%. This stands as a successful demonstration of modulating F/RTP within the dynamic MOF, unlocking potential applications in optical sensing and beyond. Especially, a PL thermometer with a relative sensitivity of 0.096-0.104%·K-1 in the range of 300-380 K and a H2S probe with a remarkably low LOD of 125.80 nM can be obtained using this responsive MOF material of LIFM-SHL-3a.

Icing on the Cake: Imidazole-Anchored Strategy To Enhance the Proton Conductivity of Two Isostructural Ce(IV)/Hf(IV) Metal-Organic Frameworks

In the field of proton conduction, the acquisition of crystalline metal-organic frameworks (MOFs) with high stability and ultrahigh proton conductivity has been of great research value and is worth continuous exploration. Here, we greenly synthesized a three-dimensional porous MOF (MOF-801-Ce) by using [(NH4)2Ce(NO3)6 and fumaric acid as starting materials and solvothermally synthesized Hf-UiO-66-NO2 by using HfCl4 and 2-nitroterephthalic acid as starting materials. A series of measurements have shown that both MOFs exhibit good water stability, acid-base stability, and thermal stability and demonstrate outstanding proton conductivity. At 100 °C and 98% relative humidity (RH), the proton conductivities (σ) could be 2.59 × 10-3 S·cm-1 for MOF-801-Ce and 0.89 × 10-3 S·cm-1 for Hf-UiO-66-NO2. To pursue higher proton conductivity, we further adopted the evaporation approach to encapsulate imidazole molecules in the pores of the two compounds, achieving the imidazole-encapsulated MOFs, Im@MOF-801-Ce and Im@Hf-UiO-66-NO2. As expected, their σ values were significantly boosted by almost an order of magnitude up to 10-2 S·cm-1. Finally, their proton-conductive mechanisms were explored in light of the structural information, gas adsorption/desorption, and other tests. The outstanding structural stability of these MOFs and their durability of the proton conduction capability manifested that they have great promise in electrochemical fields.

Construction and Application of Multipurpose metal-organic frameworks -based Hydrogen Sulfide Probe

Hydrogen sulfide (H2S) is a toxic gas derived from the sulfur industry and trace H2S in the environment can cause serious ecological damage while inhalation can cause serious damage and lead to disease. Therefore, the real-time and accurate detection of trace sulfur ions is of great significance for environmental protection and early disease detection. Considering the shortcoming of current H2S probes in terms of stability and sensitivity, the development of novel probes is necessary. Herein, a novel metal-organic frameworks (MOF)-based material, UiO-66-NH2@BDC, was designed and prepared for the visual detection of H2S with rapid response (< 6 s) and low detection limit of S2- (0.13 µM) by hydrogen bonding. Based on its good optical performance, the UiO-66-NH2@BDC probe can detect S2- in various water environments. More importantly, UiO-66-NH2@BDC probe realize imaging S2- in cells and live zebrafish.

Recent Progress in Metal-Organic Framework Based Fluorescent Sensors for Hazardous Materials Detection

Population growth and industrial development have exacerbated environmental pollution of both land and aquatic environments with toxic and harmful materials. Luminescence-based chemical sensors crafted for specific hazardous substances operate on host-guest interactions, leading to the detection of target molecules down to the nanomolar range. Particularly, the luminescence-based sensors constructed on the basis of metal-organic frameworks (MOFs) are of increasing interest, as they can not only compensate for the shortcomings of traditional detection techniques, but also can provide more sensitive detection for analytes. Recent years have seen MOFs-based fluorescent sensors show outstanding advantages in the field of hazardous substance identification and detection. Here, we critically discuss the application of MOFs for the detection of a broad scope of hazardous substances, including hazardous gases, heavy metal ions, radioactive ions, antibiotics, pesticides, nitro-explosives, and some harmful solvents as well as luminous and sensing mechanisms of MOF-based fluorescent sensors. The outlook and several crucial issues of this area are also discussed, with the expectation that it may help arouse widespread attention on exploring fluorescent MOFs (LMOFs) in potential sensing applications.

A sensitive colorimetric hydrogen sulfide detection approach based on copper-metal-organic frameworks and a smartphone

In this study, we demonstrate a colorimetric approach for the detection of hydrogen sulfide (H₂S) in water samples with high sensitivity. Firstly, copper-metal-organic frameworks (Cu-MOFs) were synthesized by ultrasonic-assisted hydrothermal method, presenting a maximum absorption peak at 700 nm. It was found that Cu-MOFs could react with H₂S to form a copper-sulfur complex along with a decrease of the absorption peak at 700 nm and a visible color change from blue to tan. Under the optimal reaction conditions, the absorption intensity at 700 nm was linear with H₂S concentration in a range of 0.05-2 mM (R² = 0.9928), providing a detection limit of 22 μM. Furthermore, the method was successfully applied to the detection of H₂S in lake water samples with a recovery rate between 94.4% and 112.6%. In addition, a practical and portable device for on-site H₂S detection was designed by using agarose hydrogels, and a simple colorimetric detection method based on a smartphone was developed. This analytical method showed good selectivity for H₂S compared to other interfering substances, and the feasibility of the agarose hydrogel-based device was proved by the determination of H₂S in real lake water samples.

Hydrazone connected stable luminescent covalent-organic polymer for ultrafast detection of nitro-explosives

Developing promising luminescent probes for the selective sensing of nitro-explosives remains a challenging issue. Porous luminescent covalent–organic polymers are one of the excellent sensing probes for trace hazardous materials. Herein, fluorescent monomers 1,1,2,2-tetrakis(4-formyl-(1,1′-biphenyl))ethane (TFBE) and 1,3,5-benzenetricarboxylic acid trihydrazide (BTCH) were selected to build a novel hydrazone connected stable luminescent covalent–organic polymer (H-COP) of high stability by typical Schiff-base reaction. The N₂ sorption study, BET surface area analysis, and TGA profile indicate the porosity and stability of this H-COP material. Such properties of the H-COP material enable a unique sensing platform for nitro-explosives with great sensitivity (Ksv ∼ 10⁶ M) and selectivity up to μM. This polymer material shows attractive selectivity and sensitivity towards phenolic nitro-explosives and other common explosives among earlier reported COP-based sensors.

A novel H-COP was synthesized through Schiff-base condensation reaction, which shows high sensitivity (K_sv ∼ 10⁶ M⁻¹) and selectivity (μM level) towards nitro-explosives.

Tb3+-Doped Ag-MOFs for fluorescent detection of formaldehyde in a novel smartphone platform and its removal applications in milk products and wastewater

As one kind of reactive carbonyl species (RCS), formaldehyde (FA) with a high concentration could be extremely toxic to living bodies as well as the environment. This paper reports a three-dimensional (3D) Tb3+@Ag-MOFs-based fluorescent probe for fast sensing of FA, which uses a novel turn-on mechanism based on the luminescence induced by Tb3+. The MOF sensor shows broad dynamic ranges of 0.1-1 mM for FA with the detection limit of 1.9 μM. For online and real-time detection of FA, a portable smartphone platform was employed to analyze the RGB values of the fluorescence by a smartphone application. By incorporating this probe into a polyacrylonitrile (PAN) layer, we synthesized a film composite that could effectively remove FA in real samples including milk and chemical factory wastewater, and the removal rate reached 98.52% and 95.38% respectively. Moreover, the potential of the film to remove gaseous FA was confirmed by experiments as well.

Ultrafast and nanomolar level detection of H2S in aqueous medium using a functionalized UiO-66 metal-organic framework based fluorescent chemosensor

Here, we present a 4-nitrophenyl functionalized Zr-UiO-66 MOF (MOF = metal-organic framework) and its applications towards the selective, sensitive and rapid detection of H₂S both in the aqueous medium and vapour phase. The MOF material was synthesized using the 2-(nitrophenoxy)terepththalic acid (H₂BDC-O-Ph-NO₂) linker and ZrCl₄ salt in the presence of a benzoic acid modulator. It was carefully characterized by thermogravimetric analysis (TGA), elemental analysis, powder X-ray diffraction (PXRD), FT-IR spectroscopy and surface area analysis. Noticeable thermal stability up to a temperature of 390 °C under air and the considerable chemical stability in different liquid media (H₂O, 1 M HCl, glacial acetic acid, NaOH in the pH = 8 to 10 range) confirmed the robustness of the MOF. The BET surface area (1040 m² g^-1) indicated the porous nature of the MOF. Remarkable selectivity of the MOF towards H₂S over other potential congeners of H₂S was observed in the aqueous medium. A very high fluorescence increment (∼77 fold) was observed after adding an aqueous Na₂S solution to the MOF suspension. The MOF probe displayed the lowest limit of detection (12.58 nM) among the existing MOF-based chemosensors of H₂S. Furthermore, it exhibited a very quick (60 s) response towards H₂S detection. The MOF compound could also detect H₂S in the vapour phase as well as in real water samples. Furthermore, we developed inexpensive MOF-coated paper strips for the naked-eye sensing of H₂S. A thorough investigation was carried out in order to elucidate the fluorescence turn-on sensing mechanism.

The chemistry and applications of hafnium and cerium(iv) metal-organic frameworks

The coordination connection of organic linkers to the metal clusters leads to the formation of metal-organic frameworks (MOFs), where the metal clusters and ligands are spatially entangled in a periodic manner. The immense availability of tuneable ligands of different length and functionalities gives rise to robust molecular porosity ranging from several angstroms to nanometres. Among the large family of MOFs, hafnium (Hf) based MOFs have been demonstrated to be highly promising for practical applications due to their unique and outstanding characteristics such as chemical, thermal, and mechanical stability, and acidic nature. Since the report of UiO-66(Hf) and DUT-51(Hf) in 2012, less than 200 Hf-MOFs (ca. 50 types of structures) have been reported. Besides, tetravalent cerium [Ce(iv)] has been proven to be capable of forming similar topological MOF structures to Zr and Hf since its first discovery in 2015. So far, ca. 40 Ce(iv) MOFs with 60% having UiO-66-type structure have been reported. This review will offer a holistic summary of the chemistry, uniqueness, synthesis, and applications of Hf/Ce(iv)-MOFs with a focus on presenting the development in the Hf/Ce(iv)-clusters, topologies, ligand structures, synthetic strategies, and practical applications of Hf/Ce(iv)-MOFs. In the end, we will present the research outlook for the development of Hf/Ce(iv)-MOFs in the future, including fundamental design of Hf/Ce(iv)-clusters, defect engineering, and various applications including membrane development, diversified types of catalytic reactions, irradiation absorption in nuclear waste treatment, water production and wastewater treatment, etc. We will also present the emerging computational approaches coupled with machine-learning algorithms that can be applied in screening Hf and Ce(iv) based MOF structures and identifying the best-performing MOFs for tailor-made applications in future practice.

Construction of a series of metal-directed MOFs to explore their physical and chemical properties

Here, we report a series of metal-directed coordination polymers and explore their various properties. The polymeric networks show interesting properties such as selective CO₂ gas adsorption, Fenton-type photocatalytic dye degradation and heterogeneous catalytic reduction of 4-nitrophenol.

The selective and sensitive detection of formaldehyde by ZIF-90-LWvia aza-Cope rearrangement

Formaldehyde (FA), as one of the simplest reactive carbonyl species (RCS), is widely known as an environmental toxin and carcinogen. In this work, a new ZIF-90 type material (ZIF-90-LW) was synthesized and investigated, which combines the two strategies of "2-aza-Cope rearrangement" and "MOF structure", by the combination of a pre-functionalized 2-allylaminoimidazole ligand and Zn²⁺ salt under solvothermal conditions. From this, the hurdle of selectivity over other carbonyl compounds (RCS) could be overcome despite their similar electrophilic reactivities to FA, and a prominent fluorescence turn-on type signal was realized through the 2-aza-Cope rearrangement mechanism. A good linear relationship (R² = 0.9979) was obtained by fitting the fluorescence intensity towards FA from 0 to 25 mM, and the detection limit of ZIF-90-LW for FA was 2.3 μM. In addition, it also showed potentially useful sensing ability for the detection of FA in the gas phase, and might therefore be used to rapidly detect FA with a response time of 28 s in the liquid phase. All of the above features clearly demonstrate that ZIF-90-LW has great potential for sensitive and selective recognition of FA in the environment.

Nanoceria-Templated Metal Organic Frameworks with Oxidase-Mimicking Activity Boosted by Hexavalent Chromium

The high toxicity and mobility of hexavalent chromium (Cr(VI)) allow it to easily spread and bioaccumulate, and its detection is a major part of environmental protection. In this work, an innovative method is developed for preparation of cerium oxide nanorod-templated metal-organic frameworks (CeO₂NRs-MOF). The in situ growth of MOF on the surface of CeO₂ nanorods (CeO₂NRs) enhances its oxidase-like activity. In the presence of a trace amount of Cr(VI), CeO₂NRs-MOF can significantly accelerate the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) due to Cr(VI)-boosted oxidation, resulting in a blue colored oxidation product. It can detect Cr(VI) over a range of 0.03-5 μM with high selectivity. Moreover, this method can be applied to the detection of Cr(VI) in different water environment samples with satisfactory recoveries, demonstrating the potential application of CeO₂NRs-MOF for the direct monitoring of Cr(VI) in environmental water systems. Thus, this work provides a facile host-templated MOF preparation method, which could possibly be extended to other fields.

Ce-MIL-140: expanding the synthesis routes for cerium(iv) metal-organic frameworks

A microwave-assisted synthesis method for Ce(iv)-based MOFs crystallizing in the MIL-140 structure has been developed. Three different linker molecules, i.e. terephthalic acid (H2BDC), 2-chloroterephthalic acid (H2BDC-Cl) and 2,6-naphtalenedicarboxylic acid (H2NDC) that have previously been used for the synthesis of Ce-UiO-66 which contains hexanuclear Ce-O clusters as the inorganic building unit (IBU), were employed. Under solvothermal reaction conditions (140 °C) with acetonitrile as the solvent the compounds Ce-MIL-140-BDC, -BDC-Cl and -NDC, with the general composition [CeO(linker)] were obtained as microcrystalline products. For all three MOFs an extended purification process had to be carried out. The MOFs were fully characterized and the structure of Ce-MIL-140-BDC was refined against PXRD data using the Rietveld method. In contrast to Zr-MIL-140-BDC a symmetry reduction to the space group P1[combining macron] is observed. The MIL-140 structure type is built up by infinite CeO7 polyhedra that are interconnected by dicarboxylate ions to generate 1D pores. For Ce-MIL-140-BDC the highest specific surface area of asBET = 222 m2 g-1 is observed and the MOF is thermally stable up to 370 °C. This new synthetic route to Ce(iv)-MOFs avoids the formation of the previously extremely dominant hexanuclear IBU, and paves the way for higher IBU diversity in Ce(iv)-MOFs.

The chemistry of Ce-based metal-organic frameworks

Metal-organic frameworks (MOFs) have gained widespread attention due to their modular construction that allows the tuning of their properties. Within this vast class of compounds, metal carboxylates containing tri- and tetravalent metal ions have been in the focus of many studies due to their often high thermal and chemical stabilities. Cerium has a rich chemistry, which depends strongly on its oxidation state. Ce(iii) exhibits properties typically observed for rare earth elements, while Ce(iv) is mostly known for its oxidation behaviour. In MOF chemistry this is reflected in their unique optical and catalytic properties. The synthetic parameters for Ce(iii)- and Ce(iv)-MOFs also differ substantially and conditions must be chosen to prevent reduction of Ce(iv) for the formation of the latter. Ce(iii)-MOFs are usually reported in comprehensive studies together with those constructed with other RE elements and normally they are isostructural. They exhibit a greater structural diversity, which is reflected in the larger variety of inorganic building units. In contrast, the synthesis conditions of Ce(iv)-MOFs were only recently (2015) established. These lead selectively to hexanuclear Ce-O clusters that are well-known for Zr-MOFs and therefore very similar structural and isoreticluar chemistry is found. Hence Ce(iv)-MOFs exhibit often high porosity, while only a few porous Ce(iii)-MOFs have been described. Some of these show structural flexibility which makes them interesting for separation processes. For Ce(iv)-MOFs the redox properties are most relevant. Thus, they are intensively discussed for catalytic, photocatalytic and sensing applications. In this perspective, the synthesis, structural chemistry and properties of Ce-MOFs are summarized.

Unraveling the origin of the “Turn-On” effect of Al-MIL-53-NO2 during H2S detection

Real fluorophores were found in nitro-functionalized metal–organic frameworks for H₂S detection using a representative MOF, Al-MIL-53-NO₂.

Influence of pH on CeIV-[AsIIIW9O33]9− association for the formation of hexanuclear cerium(iv) oxo-hydroxo-clusters stabilized by trivacant polyanions

Influence of pH on Ce^IV-AsW₉O₃₃ association leads to the formation of four crystalline compounds incorporating classical and distorted hexanuclear cerium clusters.

Post-synthetic modification of a metal–organic framework with a chemodosimeter for the rapid detection of lethal cyanide via dual emission

A post-synthetically modified chemodosimeter grafted MOF is presented for the selective, visual and fluorogenic detection of cyanide via dual emission.

Amino group dependent sensing properties of metal–organic frameworks: selective turn-on fluorescence detection of lysine and arginine

Recently, metal–organic frameworks (MOFs) have been extensively investigated as fluorescence chemsensors due to their tunable porosity, framework structure and photoluminescence properties. In this paper, a well-known Zr(iv)-based MOF, UiO-66-NH₂ was demonstrated to have capability for detection of l-lysine (Lys) and l-arginine (Arg) selectively from common essential amino acids in aqueous media via a fluorescence turn-on mechanism. Further investigation reveals its high sensitivity and strong anti-interference properties. Moreover, the possible mechanism for sensing Lys and Arg was explored by FT-IR and ¹H-NMR, and the results indicate that the enhancement of the fluorescence could be ascribed to the adsorption of Lys/Arg and the hydrogen bonding interactions between Lys/Arg and the amino group of UiO-66-NH₂. The difference of the sensing capacity and sensitivity between UiO-66 and UiO-66-NH₂ revealed that the amino group plays an essential role in the sensing performance. This work presents a unique example of the functional group dependent sensing properties of MOFs.

The amino group of UiO-66-NH₂ was demonstrated to play an important role in selective fluorescence turn-on sensing of lysine and arginine.

Functional metal–organic frameworks as effective sensors of gases and volatile compounds

This review summarizes the recent advances of metal organic framework (MOF) based sensing of gases and volatile compounds.

Functionalized Metal-Organic Framework UiO-66-NH-BQB for Selective Detection of Hydrogen Sulfide and Cysteine

Hydrogen sulfide (H₂S) is an important signaling molecule related to many diseases. Thus, H₂S has a great impact on the pathological and physiological processes in biological systems. Cysteine (l-Cys) is a building block for proteins and important metabolites. To understand their roles in the physiological metabolic procedures, the measurement of the H₂S level and identifying cysteine in the biological system is significant. In this study, through the functionalization of UiO-66-NH₂ by 4-(2,2-dicyanoethenyl)benzoic acid (BQB), a novel UiO-66-NH-BQB is successfully synthesized and used as a fluorescence probe to recognize and detect H₂S and l-Cys. The fluorescence signals of the probe are enhanced great when it is exposed to H₂S or cysteine molecules; thus, it is able to determine quantificationally the H₂S concentration in an aqueous solution. The detection limitation of the UiO-66-NH-BQB to H₂S concentration is found to be as low as 1.74 μM. The developed fluorescent probe based on UiO-66-NH-BQB displays a high selectivity and excellent biocompatibility, which is very promising for recognition and sensing of biothiols in organisms.

Recent Progress in Metal-Organic Framework (MOF) Based Luminescent Chemodosimeters

Metal-organic frameworks (MOFs), as a class of crystalline hybrid architectures, consist of metal ions and organic ligands and have displayed great potential in luminescent sensing applications due to their tunable structures and unique photophysical properties. Until now, many studies have been reported on the development of MOF-based luminescent sensors, which can be classified into two major categories: MOF chemosensors based on reversible host-guest interactions and MOF chemodosimeters based on the irreversible reactions between targets with a probe. In this review, we summarize the recently developed luminescent MOF-based chemodosimeters for various analytes, including H2S, HClO, biothiols, fluoride ions, redox-active biomolecules, Hg2+, and CN-. In addition, some remaining challenges and future perspectives in this area are also discussed.

A dinitro-functionalized metal-organic framework featuring visual and fluorogenic sensing of H2S in living cells, human blood plasma and environmental samples

Here, we describe a new dinitro-functionalized Zr(iv) MOF (MOF = metal-organic framework) having a UiO-66 (UiO = University of Oslo) framework topology called UiO-66-(NO₂)₂ (1). It shows fluorescence turn-on behavior towards H₂S in simulated biological medium (HEPES buffer, pH = 7.4). By employing solvothermal conditions, 1 was successfully synthesized by reacting ZrCl₄, H₂BDC-(NO₂)₂ [H₂BDC-(NO₂)₂ = 2,5-dinitro-1,4-benzenedicarboxylic acid] ligand and benzoic acid with a molar ratio of 1 : 1 : 10 in DMF (DMF = N,N-dimethylformamide) at 130 °C for 24 h. The material was characterized by infrared spectroscopy, X-ray powder diffraction (XRPD) and thermogravimetric (TG) analyses. The compound not only displays highly sensitive fluorometric sensing of H₂S but also exhibits a visually detectable colorimetric change towards H₂S in daylight. Moreover, the high selectivity of 1' towards H₂S is retained even when several other biologically intrusive species co-exist in the sensing medium. The limit of detection (LOD) of the compound is 14.14 μM which lies in the range of the H₂S concentration found in biological systems. Fluorescence microscopy studies on J774A.1 cells revealed the efficacy of the probe for imaging H₂S in living cells. Moreover, this material can detect H₂S in human blood plasma (HBP) and monitor the sulfide concentration in real water samples. All these features clearly demonstrate that the material has huge potential for highly selective sensing of both extracellular and intracellular H₂S.

A silver nanoparticle-anchored UiO-66(Zr) metal–organic framework (MOF)-based capacitive H2S gas sensor

Metal–organic frameworks anchored with metal oxide nanoparticles for the detection of H₂S gas with enhanced sensitivity.

Bio-related applications of porous organic frameworks (POFs)

Porous organic frameworks (POFs) are promising candidates for bio-related applications. This review highlights the recent progress in POF-based bioapplications, including drug delivery, bioimaging, biosensing, therapeutics, and artificial shells. These encouraging performances suggest that POFs used for bioapplications deserve more attention in the future.

A dual functional MOF-based fluorescent sensor for intracellular phosphate and extracellular 4-nitrobenzaldehyde

A hydrazine-functionalized Zr(iv) MOF was used for the selective and sensitive detection of intracellular PO₄³⁻ ions and extracellular 4-nitrobenzaldehyde.

A phthalimide-functionalized UiO-66 metal–organic framework for the fluorogenic detection of hydrazine in live cells

A phthalimide-functionalized Zr(iv) UiO-66 MOF was utilized for fluorogenic detection of hydrazine in HEPES buffer and inside living cells.

Selective detection and removal of mercury ions by dual-functionalized metal–organic frameworks: design-for-purpose

In this study, through introducing a new functional group into the structure, the performance and efficiency of MOFs as a sensor for heavy metal cations have been improved.