A combined experimental and theoretical study of RuO2/TiO2 heterostructures as a photoelectrocatalyst for hydrogen evolution

We report a joint experimental and theoretical study of RuO₂/TiO₂ heterostructures. In the experimental section, mesoporous RuO₂/TiO₂ heterostructures were prepared by impregnation of mesoporous TiO₂ nanoparticles which were synthesized from a new precursor, Na₂[Ti(C₂O₄)₃], in an aqueous solution of ruthenium(III) chloride followed by calcination at 300 °C. Using various techniques, the prepared TiO₂ and RuO₂/TiO₂ heterostructures were extensively characterized. The photoelectocatalytic application of the as-prepared heterostructures was then investigated toward the hydrogen evolution reaction (HER). The results illustrated that RuO₂ is dispersed uniformly on the TiO₂ surface. The loading of RuO₂ on TiO₂ decreases the band gap energy and extends the absorption edge to the visible light region. This wide absorption extends the photoelectrocatalytic activity of RuO₂/TiO₂ heterostructures. To obtain a deeper understanding of the increase of the photoelectrocatalytic activity of RuO₂/TiO₂ heterostructures compared to pure TiO₂, theoretical calculations at the density functional theory (DFT) level were performed on some model clusters of pure TiO₂ and the RuO₂/TiO₂ heterostructure. The theoretical results elucidated that the recombination ratio of electron-hole pairs decreases effectively for RuO₂/TiO₂ compared to pure TiO₂.

Hydrogenation of Carboxylic Acids, Esters, and Related Compounds over Heterogeneous Catalysts: A Step toward Sustainable and Carbon-Neutral Processes

The catalytic hydrogenation of esters and carboxylic acids represents a fundamental and important class of organic transformations, which is widely applied in energy, environmental, agricultural, and pharmaceutical industries. Due to the low reactivity of the carbonyl group in carboxylic acids and esters, this type of reaction is, however, rather challenging. Hence, specifically active catalysts are required to achieve a satisfactory yield. Nevertheless, in recent years, remarkable progress has been made on the development of catalysts for this type of reaction, especially heterogeneous catalysts, which are generally dominating in industry. Here in this review, we discuss the recent breakthroughs as well as milestone achievements for the hydrogenation of industrially important carboxylic acids and esters utilizing heterogeneous catalysts. In addition, related catalytic hydrogenations that are considered of importance for the development of cleaner energy technologies and a circular chemical industry will be discussed in detail. Special attention is paid to the insights into the structure-activity relationship, which will help the readers to develop rational design strategies for the synthesis of more efficient heterogeneous catalysts.

Enhanced Catalytic Denitrification Performance of Ruthenium-based Catalysts by Hydrogen Spillover from a Palladium Promoter

Catalytic denitrification, a promising technology for nitrate removal, is increasingly limited by the rising price of Pd. Replacing Pd with less-expensive Ru would significantly reduce the cost; however, Ru-based catalysts have been reported to perform inconsistently in denitrification applications, making their replacement prospects unclear. Herein, the surface oxidation of Ru catalysts was confirmed to be a key factor that inhibits activity. A series of Ru-Pd catalysts containing small amounts of Pd (0.5 wt%) was developed to eliminate the Ru surface-oxide layer through the spillover of hydrogen atoms activated on the Pd promoter. Ru-Pd/Fe₃O₄ exhibited superior catalytic activity to Ru-Pd/C and Ru-Pd/Al₂O₃ because the reducible carrier (Fe₃O₄) has a lower resistance to hydrogen spillover and diffusion, as determined experimentally and supported by density functional theory calculations. This study developed a method that eliminates ruthenium surface oxides in situ and restores its denitrification activity, further reducing the barrier to Ru replacing Pd in catalytic aqueous denitrification.

Comparative Study of the Efficiency of Different Noble Metals Supported on Hydroxyapatite in the Catalytic Lean Methane Oxidation under Realistic Conditions

The combustion of lean methane was studied over palladium, rhodium, platinum, and ruthenium catalysts supported on hydroxyapatite (HAP). The samples were prepared by wetness impregnation and thoroughly characterized by BET, XRD, UV-Vis-NIR spectroscopy, H₂-TPR, OSC, CO chemisorption, and TEM techniques. It was found that the Pd/HAP and Rh/HAP catalysts exhibited a higher activity compared with Pt/HAP and Ru/HAP samples. Thus, the degree of oxidation of the supported metal under the reaction mixture notably influenced its catalytic performance. Although Pd and Rh catalysts could be easily re-oxidized, the re-oxidation of Pt and Ru samples appeared to be a slow process, resulting in small amounts of metal oxide active sites. Feeding water and CO₂ was found to have a negative effect, which was more pronounced in the presence of water, on the activity of Pd and Rh catalysts. However, the inhibiting effect of CO₂ and H₂O decreased by increasing the reaction temperature.

Effects of TiO2 structure and Co addition as a second metal on Ru-based catalysts supported on TiO2 for selective hydrogenation of furfural to FA

The TiO2 supported Ru-based catalysts were prepared with 1.5 wt% Ru and 0-0.8 wt% Co on various TiO2 (anatase, rutile, P-25, and sol-gel TiO2) and studied in the liquid-phase selective hydrogenation of furfural to furfuryl alcohol (FA) under mild conditions (50 °C and 2 MPa H2). The presence of high anatase crystallographic composition on TiO2 support was favorable for enhancing hydrogenation activity, while the strong interaction between Ru and TiO2 (Ru-TiOx sites) was required for promoting the selectivity to FA. The catalytic performances of bimetallic Ru-Co catalysts were improved with increasing Co loading due to the synergistic effect of Ru-Co alloying system together with the strong interaction between Ru and Co as revealed by XPS, H2-TPR, and TEM-EDX results. The enhancement of reducibility of Co oxides in the bimetallic Ru-Co catalysts led to higher hydrogenation activity with the Ru-0.6Co/TiO2 catalyst exhibited the best performances in FA selective hydrogenation of furfural to FA under the reaction conditions used.

Nanostructured Metal Catalysts for Selective Hydrogenation and Oxidation of Cellulosic Biomass to Chemicals

Conversion of biomass to chemicals provides essential products to human society from renewable resources. In this context, achieving atom-economical and energy-efficient conversion with high selectivity towards target products remains a key challenge. Recent developments in nanostructured catalysts address this challenge reporting remarkable performances in shape and morphology dependent catalysis by metals on nano scale in energy and environmental applications. In this review, most recent advances in synthesis of heterogeneous nanomaterials, surface characterization and catalytic performances for hydrogenation and oxidation for biorenewables with plausible mechanism have been discussed. The perspectives obtained from this review paper will provide insights into rational design of active, selective and stable catalytic materials for sustainable production of value-added chemicals from biomass resources.

PDDA-Montmorillonite Composites Loaded with Ru Nanoparticles: Synthesis, Characterization, and Catalytic Properties in Hydrogenation of 2-Butanone

The effect of synthesis parameters on the physicochemical properties of clay/ polydiallyldimethylammonium (PDDA)/Ru composites and their applicability in hydrogenation of 2-butanone under very mild conditions (room temperature, atmospheric pressure, and aqueous solution) was studied. Three synthetic procedures were employed, differing in the order of addition of components and the stage at which metallic Ru species were generated. The materials were characterized with XRD (X-ray diffraction), XRF (X-ray fluorescence), EDS (energy-dispersive spectroscopy), AFM (atomic force microscopy), TEM/HRTEM (transmission electron microscopy/high resolution transmission electron microscopy), and TG/DSC (thermal gravimetry/differential scanning microscopy techniques. The study revealed that the method of composite preparation affects its structural and thermal properties, and controls the distribution and size of Ru particles. All catalysts are active in hydrogenation of 2-butanone. For best catalytic performance (100% conversion within 30 min) both the size of Ru particles and the load of polymer had to be optimized. Superior catalytic properties were obtained over the composite with intermediate crystal size and intermediate PDDA load, prepared by generation of metallic Ru species in the polymer solution prior to intercalation. This method offers an easy way of controlling the crystal size by modification of Ru/PDDA ratio.

Nanoceria-Supported Ruthenium(0) Nanoparticles: Highly Active and Stable Catalysts for Hydrogen Evolution from Water

Ruthenium(0) nanoparticles supported on nanoceria (Ru⁰/CeO₂) were prepared by reduction of Ru³⁺ ions on the surface of ceria using aqueous solution of NaBH₄. The Ru⁰/CeO₂ samples were characterized by advanced analytical tools and employed as electrocatalysts on the glassy carbon electrode (GCE) in hydrogen evolution from water. The GCE, modified by Ru⁰/CeO₂ (1.86 wt % Ru), provides an incredible electrocatalytic activity with a high exchange current density of 0.67 mA·cm^-2, low overpotential of 47 mV at j = 10 mA·cm^-2, and small Tafel slope of 41 mV·dec^-1. Moreover, this modified GCE provides an unprecedented long-term stability without changing the onset potential (33 mV) even after 10 000 scans in acidic water splitting at room temperature. The hydrogen gas, evolved during the water splitting using the Ru⁰/CeO₂ (1.86 wt % Ru) electrocatalyst, was also collected. The amount of the evolved H₂ gas matches well with the calculated value, which indicates the achievement of nearly 100% Faradaic efficiency.