Highly selective uptake of carbon dioxide on the zeolite |Na10.2KCs0.8|-LTA – a possible sorbent for biogas upgrading

Adsorption-Induced Deformation of Zeolites 4A and 13X: Experimental and Molecular Simulation Study

Gas adsorption in zeolites leads to adsorption-induced deformation, which can significantly affect the adsorption and diffusive properties of the system. In this study, we conducted both experimental investigations and molecular simulations to understand the deformation of zeolites 13X and 4A during carbon dioxide adsorption at 273 K. To measure the sample's adsorption isotherm and strain simultaneously, we used a commercial sorption instrument with a custom-made sample holder equipped with a dilatometer. Our experimental data showed that while the zeolites 13X and 4A exhibited similar adsorption isotherms, their strain isotherms differed significantly. To gain more insight into the adsorption process and adsorption-induced deformation of these zeolites, we employed coupled Monte Carlo and molecular dynamics simulations with atomistically detailed models of the frameworks. Our modeling results were consistent with the experimental data and helped us identify the reasons behind the different deformation behaviors of the considered structures. Our study also revealed the sensitivity of the strain isotherm of zeolites to pore size and other structural and energetic features, suggesting that measuring adsorption-induced deformation could serve as a complementary method for material characterization and provide guidelines for related technical applications.

Carbon dioxide capture with zeotype materials

This review describes the application of zeotype materials for the capture of CO2 in different scenarios, the critical parameters defining the adsorption performances, and the challenges of zeolitic adsorbents for CO2 capture.

Selective Adsorption of CO2 on Zeolites NaK-ZK-4 with Si/Al of 1.8-2.8

Zeolites with appropriately narrow pore apertures can kinetically enhance the selective adsorption of CO₂ over N₂. Here, we showed that the exchangeable cations (e.g., Na⁺ or K⁺) on zeolite ZK-4 play an important role in the CO₂ selectivity. Zeolites NaK ZK-4 with Si/Al = 1.8-2.8 had very high CO₂ selectivity when an intermediate number of the exchangeable cations were K⁺ (the rest being Na⁺). Zeolites NaK ZK-4 with Si/Al = 1.8 had high CO₂ uptake capacity and very high CO₂-over-N₂ selectivity (1190). Zeolite NaK ZK-4 with Si/Al = 2.3 and 2.8 also had enhanced CO₂ selectivity with an intermediate number of K⁺ cations. The high CO₂ selectivity was related to the K⁺ cation in the 8-rings of the α-cage, together with Na⁺ cations in the 6-ring, obstructing the diffusion of N₂ throughout the zeolite. The positions of the K⁺ cation in the 8-ring moved slightly (max 0.2 Å) toward the center of the α-cage upon the adsorption of CO₂, as revealed by in situ X-ray diffraction. The CO₂-over-N₂ selectivity was somewhat reduced when the number of K⁺ cations approached 100%. This was possibly due to the shift in the K⁺ cation positions in the 8-ring when the number of Na⁺ was going toward 0%, allowing N₂ diffusion through the 8-ring. According to in situ infrared spectroscopy, the amount of chemisorbed CO₂ was reduced on zeolite ZK-4s with increasing Si/Al ratio. In the context of potential applications, a kinetically enhanced selection of CO₂ could be relevant for applications in carbon capture and bio- and natural gas upgrading.

Freeze Granulated Zeolites X and A for Biogas Upgrading

Biogas is a potential renewable energy resource that can reduce the current energy dependency on fossil fuels. The major limitation of utilizing biogas fully in the various applications is the presence of a significant volume fraction of carbon dioxide in biogas. Here, we used adsorption-driven CO2 separation using the most prominent adsorbents, NaX (faujasite) and CaA (Linde Type A) zeolites. The NaX and CaA zeolites were structured into hierarchically porous granules using a low-cost freeze granulation technique to achieve better mass transfer kinetics. The freeze granulation processing parameters and the rheological properties of suspensions were optimized to obtain homogenous granules of NaX and CaA zeolites 2-3 mm in diameter with macroporosity of 77.9% and 68.6%, respectively. The NaX and CaA granules kept their individual morphologies, crystallinities with a CO2 uptake of 5.8 mmol/g and 4 mmol/g, respectively. The CO2 separation performance and the kinetic behavior were estimated by breakthrough experiments, where the NaX zeolite showed a 16% higher CO2 uptake rate than CaA granules with a high mass transfer coefficient, 1.3 m/s, compared to commercial granules, suggesting that freeze-granulated zeolites could be used to improve adsorption kinetics and reduce cycle time for biogas upgrading in the adsorption swing technology.

Optimized cesium and potassium ion-exchanged zeolites A and X granules for biogas upgrading

Ion exchange of binderless zeolite A and X granules leads to high CO₂/CH₄ selectivity and CO₂ uptake capacity.

Nanostructure and pore size control of template-free synthesised mesoporous magnesium carbonate

The structure of mesoporous magnesium carbonate (MMC) first presented in 2013 is investigated using a bottom-up approach.