Development of type-I/type-II hybrid dye sensitizer with both pyridyl group and catechol unit as anchoring group for type-I/type-II dye-sensitized solar cell

New picolinate-functionalized titanium-oxide clusters: syntheses, structures and photocatalytic H2 evolution

Two nanosized titanium-oxide clusters (TOCs), Ti₁₂(μ₂-O)₁₄(μ₃-O)₄PA₁₆ (1; PA = 2-picolinate) and Ti₁₂(μ₂-O)₁₈PA₁₈ (2) were synthesized by using 2-picolinic acid and Ti(OⁱPr)₄ in one-pot reactions. Their structures were determined using single-crystal X-ray diffractometry. Although both have the same core composition of Ti₁₂O₁₈, 1 exhibited superior H₂ evolution activity of up to 180 μmol h^-1 g^-1, which is nearly eight times faster than 2. Mechanism studies revealed that 1 could induce the assembly of 2.3 nm PtNPs into 10-30 nm supra-nanoparticle structures, which contributed to the increased H₂ evolution rate.

Syntheses, Structures and Ligand Binding Modes of Titanium-Oxide Complexes of 2-Picolinate

Six titanium-oxide clusters (TOCs) comprised of 6-19 Ti atoms all of which are of nanometer size were synthesized with the functionalization of 2-picolinate (PA). Their structures were determined by single-crystal...

Preliminary Investigation on Vacancy Filling by Small Molecules on the Performance of Dye-Sensitized Solar Cells: The Case of a Type-II Absorber

The steric shielding offered by sensitizers on semiconducting surfaces as a result of branching in the dyes used offers the less utilization of semiconducting substrate sites during device fabrication in dye-sensitized solar cells (DSSCs). This work proposes a strategy to increase the coverage through the utilization of small molecules which have the ability to penetrate into the sites. The small molecules play the dual role of vacancy filling and sensitization, which can be viewed as an alternative to co-sensitization also. Hence, we show for the first time ever that the co-adsorption of catechol with Z907 as a sensitizer enhances the electron density in the photo-anode by adsorbing on the vacant sites. Catechol was subsequently adsorbed on TiO₂ after Z907 as it has a stronger interaction with TiO₂ owing to its favorable thermodynamics. The reduced number of vacant sites, suppressed charge recombination, and enhanced spectral response are responsible for the improvement in the PCEs. Quantitatively, both organic and aqueous electrolytes were used and the co-sensitized DSSCs had PCE enhancements of 7.2 and 60%, respectively, compared to the control devices.

Thiazolocatechol: Electron-Withdrawing Catechol Anchoring Group for Dye-Sensitized Solar Cells

Anchoring groups adopting a five-membered bidentate chelating are attractive to realize high power conversion efficiency (η) and long-term durability in dye-sensitized solar cells (DSSCs). In this regard, we chose catechol as an anchoring group that can adopt the chelating. However, the DSSCs with catechol-based sensitizers have never exceeded an η-value of 2 %. These poor photovoltaic performances may be associated with the electron-donating ability of the hydroxy groups in catechol. Considering these, we envisioned that fusing an electron-withdrawing thiazole moiety with a catechol anchoring group would improve its photovoltaic performance. Herein, we report a push-pull porphyrin sensitizer ZnPTC with a thiazolocatechol anchoring group. The DSSC with ZnPTC exhibited η=4.87 %. This value is the highest ever reported for catechol-anchor based DSSCs. Meanwhile, the long-term cell durability was not improved, although the robust anchoring properties were attained under harsh conditions.

Molecular Engineering of D-D-π-A-Based Organic Sensitizers for Enhanced Dye-Sensitized Solar Cell Performance

A series of molecularly engineered and novel dyes WS1, WS2, WS3, and WS4, based on the D35 donor, 1-(4-hexylphenyl)-2,5-di(thiophen-2-yl)-1H-pyrrole and 4-(4-hexylphenyl)-4H-dithieno[3,2-b:2',3'-d]pyrrole as π-conjugating linkers, were synthesized and compared to the well-known LEG4 dye. The performance of the dyes was investigated in combination with an electrolyte based on Co(II/III) complexes as redox shuttles. The electron recombination between the redox mediators in the electrolyte and the TiO₂ interface decreases upon the introduction of 4-hexylybenzene entities on the 2,5-di(thiophen-2-yl)-1H-pyrrole and 4H-dithieno[3,2-b:2',3'-d]pyrrole linker units, probably because of steric hindrance. The open circuit photovoltage of WS1-, WS2-, WS3-, and WS4-based devices in combination with the Co(II/III)-based electrolyte are consistently higher than those based on a I^-/I₃ ^- electrolyte by 105, 147, 167, and 75 mV, respectively. The WS3-based devices show the highest power conversion efficiency of 7.4% at AM 1.5 G 100 mW/cm² illumination mainly attributable to the high open-circuit voltage (V _OC).

Synthesis, optical and electrochemical properties, and photovoltaic performance of a panchromatic and near-infrared (D)2–π–A type BODIPY dye with pyridyl group or cyanoacrylic acid

(D)₂–π–A type BODIPY dyes bearing a pyridyl group or cyanoacrylic acid group and two diphenylamine–thienylcarbazole moieties which possess near-infrared adsorption ability as well as panchromatic adsorption ability, have been developed.

Synthesis and optical and electrochemical properties of julolidine-structured pyrido[3,4-b]indole dye

The julolidine-structured pyrido[3,4-b]indole dye ET-1 possesses the ability to act as a calorimetric and fluorescent sensor for Brønsted and Lewis acids.