Water as the often neglected medium at the interface between materials and biology

Despite its apparent simplicity, water behaves in a complex manner and is fundamental in controlling many physical, chemical and biological processes. The molecular mechanisms underlying interaction of water with materials, particularly polymer networks such as hydrogels, have received much attention in the research community. Despite this, a large gulf still exists in applying what is known to rationalize how the molecular organization of water on and within these materials impacts biological processes. In this perspective, we outline the importance of water in biomaterials science as a whole and give indications for future research directions towards emergence of a complete picture of water, materials and biology.

Roles of interfacial water states on advanced biomedical material design

When biomedical materials come into contact with body fluids, the first reaction that occurs on the material surface is hydration; proteins are then adsorbed and denatured on the hydrated material surface. The amount and degree of denaturation of adsorbed proteins affect subsequent cell behavior, including cell adhesion, migration, proliferation, and differentiation. Biomolecules are important for understanding the interactions and biological reactions of biomedical materials to elucidate the role of hydration in biomedical materials and their interaction partners. Analysis of the water states of hydrated materials is complicated and remains controversial; however, knowledge about interfacial water is useful for the design and development of advanced biomaterials. Herein, we summarize recent findings on the hydration of synthetic polymers, supramolecular materials, inorganic materials, proteins, and lipid membranes. Furthermore, we present recent advances in our understanding of the classification of interfacial water and advanced polymer biomaterials, based on the intermediate water concept.

Water-Induced Crystal Transition and Accelerated Relaxation Process of Polyamide 4 Chains in Microfibers

Microplastics have recently been identified as one of the major contributors to environmental pollution. To design and control the biodegradability of polymer materials, it is crucial to obtain a better understanding of the aggregation states and thermal molecular motion of polymer chains in aqueous environments. Here, we focus on melt-spun microfibers of a promising biodegradable plastic, polyamide 4 (PA4), with a relatively greater number density of hydrolyzable amide groups, which is regarded as an alternative to polyamide 6. Aggregation states and thermal molecular motion of PA4 microfibers without/with a post-heating drawing treatment under dry and wet conditions were examined by attenuated total reflectance-Fourier transform infrared spectroscopy and wide-angle X-ray diffraction analysis in conjunction with dynamic mechanical analysis. Sorbed water molecules in the microfibers induced the crystal transition from a meta-stable γ-form to a thermodynamically stable α-form via activation of the molecular motion of PA4 chains. Also, the post-drawing treatment caused a partial structural change of PA4 chains, from an amorphous phase to a crystalline phase. These findings should be useful for designing PA4-based structural materials applicable for use in marine environments.

Modification of a Polymer Surface by Partial Swelling Using Nonsolvents

Surface modification without changing the physical properties in the bulk is of pivotal importance for the development of polymers as devices. We recently proposed a simple surface functionalization method for polymer films by partial swelling using a nonsolvent and demonstrated the incorporation of poly(2-methoxyethyl acrylate) (PMEA), which has an excellent antibiofouling ability, only into the outermost region of a poly(methyl methacrylate) (PMMA) film. We here extend this technology to another versatile polymer, polystyrene (PS). In this case, PS and PMEA have different solubility parameters making it difficult to select a suitable solvent, which is a nonsolvent for PS and a good solvent for PMEA, unlike the combination of PMMA with PMEA. Thus, such a solvent was first sought by examining the swelling behavior of PS films in contact with various alcohols. Once a mixed solvent of methanol/1-butanol (50/50 (v/v)) was chosen, PMEA chains could be successfully incorporated at the outermost region of the PS film. Atomic force microscopy in conjunction with neutron reflectivity revealed that chains of PMEA incorporated in the PS surface region were well swollen in water. This leads to an excellent ability to suppress the adhesion of platelets on the PS film.

First Observation of the Hydration Layer around Polymer Chain by Scattering and Its Relationship to Thromboresistance: Dilute Solution Properties of PMEA in THF/Water

Poly(2-methoxyethyl acrylate) (PMEA) is known to exhibit excellent thromboresistance, i.e., hardly causing blood-clot formation on its surface. Hence, PMEA and its analogues have been commercially used for blood-contacting materials in medical devices. In this study, we investigated the conformation and solvation state of PMEA in mixtures of tetrahydrofuran (THF) and water with various water volume fractions (ϕ_water) by viscosity, sedimentation equilibrium, small-angle X-ray scattering (SAXS), and dielectric relaxation measurements. We also comparatively investigated those of poly[2-(2-methoxyethoxy)ethyl methacrylate] (PMe2MA) and polystyrene (PS). For all of these, THF is a good solvent and water is a nonsolvent or poor solvent. PMe2MA and PMEA show equally good thromboresistance, while PS does not at all. The solution properties of PMe2MA and PMEA were found to be quite different from PS. There are clear attractive interactions (or correlation) between the PMEA chain (or PMe2MA) and the waters in the vicinity of the chain despite their water insolubility. These correlated waters give additional scattering and the angular dependence of SAXS was analyzed in terms of the hydration layer model that has been used in protein solution scattering. The hydration is related to increasing both the chain stiffness and excluded volume. These distinctive properties are likely related to the origin of its good thromboresistance.

Role of interfacial water in determining the interactions of proteins and cells with hydrated materials

Water molecules play a crucial role in biointerfacial interactions, including protein adsorption and desorption. To understand the role of water in the interaction of proteins and cells at biological interfaces, it is important to compare particular states of hydration water with various physicochemical properties of hydrated biomaterials. In this review, we discuss the fundamental concepts for determining the interactions of proteins and cells with hydrated materials along with selected examples corresponding to our recent studies, including poly(2-methoxyethyl acrylate) (PMEA), PMEA derivatives, and other biomaterials. The states of water were analyzed by differential scanning calorimetry, in situ attenuated total reflection infrared spectroscopy, and surface force measurements. We found that intermediate water which is loosely bound to a biomaterial, is a useful indicator of the bioinertness of material surfaces. This finding on intermediate water provides novel insights and helps develop novel experimental models for understanding protein adsorption in a wide range of materials, such as those used in biomedical applications.

Effect of a heterogeneous network on glass transition dynamics and solvent crack behavior of epoxy resins

In general, it has been widely accepted that the physical properties of an epoxy resin are strongly dependent on how it is prepared. However, a clear understanding of the mechanisms of the relationship at a molecular level has yet to be achieved. We here studied the glass transition dynamics and fracture behavior of four epoxy resins, which were pre-cured at different temperatures and well cured under the same conditions. Fourier-transform infrared spectroscopy revealed that the reaction kinetics for an epoxy-amine mixture were strongly dependent on the pre-curing temperature. The glass transition temperature of epoxy resins with the same cross-linking density was dependent on the pre-curing temperature. Dielectric relaxation spectroscopy and dynamic mechanical analysis revealed that the fragility index of the epoxy resin decreased with increasing pre-curing temperature, indicating that the network structure formed in it became more heterogeneous with increasing pre-curing temperature. Once the epoxy resin was immersed in a good solvent, it was partly swollen and was then macroscopically fractured. The fracture was initiated by the crack generation in an un-swollen region of the resin due to the stress induced upon swelling. The immersion time required to reach the fracture decreased as the extent of the heterogeneity increased. The knowledge here obtained should be useful for understanding and controlling fracture toughness of epoxy resins, leading to the furtherance of their functionalization.

A Facile Surface Functionalization Method for Polymers Using a Nonsolvent

Surface treatment of polymeric solids without impairing their bulk properties is a crucial functionalization strategy for the promotion of their wider application. We here propose a facile method using a nonsolvent which can subtly alter or swell the polymer surface to be modified. A thin film of poly(methyl methacrylate) (PMMA) was immersed in a methanol solution of poly(2-methoxyethyl acrylate) (PMEA). Electron spectroscopy for chemical analysis and neutron reflectometry revealed that a PMEA layer formed on the PMMA film with a diffused interface. The PMEA layer was very swollen in water and exhibited the ability to suppress serum protein adsorption and platelet adhesion on it. The functionalization technique using a nonsolvent was also applicable to the surface of other polymeric solids such as polyurethane.

A compact device for simultaneous dielectric spectroscopy and microgravimetric analysis under controlled humidity

Water plays a key role in the functioning of natural and synthetic molecular systems. Despite several hydration studies, different techniques are employed individually for monitoring different physical features such as kinetics, dynamics, and absorption. This study describes a compact hydration cell that enables simultaneous dielectric relaxation spectroscopy (DRS) and mass loss/uptake measurements in thin organic layers under controlled humidity conditions and in a wide temperature range. This approach enabled us to correlate the physical quantities obtained during the same experiment by complementary techniques. To demonstrate the performance of this device, a 200 nm thick poly(methyl methacrylate) (PMMA) layer was measured at various relative humidity levels (0%-75%), temperatures (25-75 °C), and frequencies (DRS: 0.1 Hz-1 MHz) to study how hydration and dehydration processes affect its molecular dynamics. The results show the capability of this setup to study the changes in the PMMA film regarding the kinetics and molecular dynamics upon variation of the water content.

Design of a Well-Defined Polyrotaxane Structure on a Glassy Polymer Surface

The polymer dynamics at the water interface play a crucial role in the manifestation of biorelated functions. One of the strategies for this is to form inclusion complexes of polymer chains with cyclic compounds. However, such an idea has been limited to bulk materials so far. Here we propose a preparation pathway for a polyrotaxane structure composed of poly(ethylene oxide) (PEO) and α-cyclodextrin (CD) at the outermost surface of a glassy poly(methyl methacrylate) film on the basis of the combination of a click reaction and the Langmuir-Blodgett method. The chain motion of PEO at the water interface could be regulated by threading of CD molecules on PEO and thereby the biological responses such as protein adsorption and platelet adhesion altered depending on the extent of complexation.

Surface Characterization and Platelet Adhesion on Thin Hydrogel Films of Poly(vinyl ether)

Poly(vinyl ether), with short oxyethylene side chains which possess a simple and relatively polar structure, should be a unique candidate for a bioinert material thanks to its solubility in water. On the basis of living cationic copolymerization and subsequent ultraviolet light irradiation, thin films of poly(2-methoxyethyl vinyl ether) with different cross-linking densities were prepared on solid substrates. The films were thickened in water, and the extent was dependent on the cross-linking density. Although the surface chemistry and aggregation states were almost identical to one another, the stiffness, or the softness, of the outermost region in the film was strongly dependent on the cross-linking density. That is, the interface between polymer and water became thicker, or more diffused, with decreasing cross-linking density. The blood compatibility based on the platelet adhesion on to the hydrogel films was better for a more diffused interface.

Effect of soft segment molecular weight on the glass transition, crystallinity, molecular mobility and segmental dynamics of poly(ethylene oxide) based poly(urethane–urea) copolymers

The effect of poly(ethylene oxide) (PEO) soft segment molecular weight (M_n= 2000, 4600, 8000 g mol⁻¹) molecular mobility and segmental dynamics of a series of polyurethane–urea copolymers (PU) was investigated by dielectric relaxation spectroscopy.