Proton transfer dynamics dictate quinone speciation at lipid-modified electrodes

Synergy between Cu and Co in a Layered Double Hydroxide Enables Close to 100% Nitrate-to-Ammonia Selectivity

Nitrate electroreduction (NO3RR) holds promise as an energy-efficient strategy for the removal of toxic nitrate to restore the natural nitrogen cycle and mitigate the adverse impacts caused by overfertilization from suboptimal agricultural practices. However, existing catalysts suffer from limited electrocatalytic activity, poor selectivity, inadequate durability, and low scalability. To address this quadrilemma, in this study, we developed a cost-effective layered double hydroxide (LDH) electrocatalyst with a lamellar structure that presents trimetallic CuCoAl active sites on the nanomaterial surface. This codoping design enabled electrochemical upcycling of nitrate into ammonia exclusively and efficiently with an onset potential at 0 V vs RHE, where the electrocatalytic process is less energy intensive and has a lower carbon footprint than conventional practices. The synergistic interaction among Cu, Co, and Al further afforded a 99.5% Faradic efficiency (FE) and a yield rate of 0.22 mol h-1 g-1 for nitrate-to-ammonia electroreduction, surpassing the performance of state-of-the-art nonprecious metal NO3RR electrocatalysts over an extended operation period. To gain insights into the origin of the catalytic performance observed on LDH, control materials were employed to elucidate the roles of Cu and Co. Cu was found to improve the NO3RR onset potential despite displaying limited FE for ammonia synthesis, while Co was discovered to suppress the formation of nitrite byproduct though requiring large overpotential. Simulated wastewater containing phosphate and sulfate, which are typically present in industrial effluents, was used to further investigate the effect of electrolytes on NO3RR. Intriguingly, the use of phosphate buffer resulted in a superior yield rate and FE for ammonia production while simultaneously inhibiting nitrite byproduct formation compared with the sulfate case. These experimental findings were supported by density functional theory (DFT) calculations, which explored the adsorption strength of nitrate adducts adjacent to coadsorbed electrolytes on the LDH surface. Additionally, the relative free energies of NO3RR species were also computed to examine the proton-coupled electron transfer (PCET) mechanism on CuCoAl LDH, shedding light on the potential-dependent step (PDS) and the exclusive selectivity for nitrate-to-ammonia conversion. The CuCoAl LDH developed here offers scalability by eliminating the need for precious metals, rendering this earth-abundant catalyst particularly appealing for sustainable nitrate electrovalorization technology.

Hybrid bilayer membranes as platforms for biomimicry and catalysis

Hybrid bilayer membrane (HBM) platforms represent an emerging nanoscale bio-inspired interface that has broad implications in energy catalysis and smart molecular devices. An HBM contains multiple modular components that include an underlying inorganic surface with a biological layer appended on top. The inorganic interface serves as a support with robust mechanical properties that can also be decorated with functional moieties, sensing units and catalytic active sites. The biological layer contains lipids and membrane-bound entities that facilitate or alter the activity and selectivity of the embedded functional motifs. With their structural complexity and functional flexibility, HBMs have been demonstrated to enhance catalytic turnover frequency and regulate product selectivity of the O₂ and CO₂ reduction reactions, which have applications in fuel cells and electrolysers. HBMs can also steer the mechanistic pathways of proton-coupled electron transfer (PCET) reactions of quinones and metal complexes by tuning electron and proton delivery rates. Beyond energy catalysis, HBMs have been equipped with enzyme mimics and membrane-bound redox agents to recapitulate natural energy transport chains. With channels and carriers incorporated, HBM sensors can quantify transmembrane events. This Review serves to summarize the major accomplishments achieved using HBMs in the past decade.

Proton Removal Kinetics That Govern the Hydrogen Peroxide Oxidation Activity of Heterogeneous Bioinorganic Platforms

Precise regulation of proton-coupled electron-transfer (PCET) rates holds the key to simultaneously optimizing the turnover frequency and product selectivity of redox reactions that are central to the realization of renewable energy schemes in a sustainable future. In this work, a self-assembled monolayer (SAM) of a Ru complex electrografted onto a glassy carbon (GC) electrode was prepared as a heterogeneous electrocatalytic interface to facilitate the hydrogen peroxide (H₂O₂) oxidation half-cell reaction of a direct hydrogen peroxide/hydrogen peroxide fuel cell. A functional lipid membrane embedded with catalytic amounts of proton carriers was appended on top of the Ru SAM to construct a hybrid bilayer membrane (HBM) platform that can modulate the thermodynamics and kinetics of proton- and electron-transfer steps independently. The performances of the as-prepared Ru SAMs and HBMs toward H₂O₂ oxidation were investigated using electrochemical means, kinetic isotope effect (KIE) studies, and Tafel analyses. Proton carriers featuring borate, phosphate, and nitrile headgroups were found to dictate the transmembrane proton removal rate, thereby controlling the H₂O₂ oxidation activity. The first significance of this work was the expansion of HBM platforms to GC substrates to overcome the limited redox potential window on gold thiol systems, thereby enabling electrochemical investigations of anodic reactions at the SAM-lipid interface. The second highlight of this work was demonstrating for the first time that deprotonation kinetics can be taken advantage of to enhance the electrocatalytic oxidation performance of a metal complex anchored at the SAM-lipid interface of a HBM platform. When the knowledge gaps regarding how PCET steps govern redox pathways are closed, the advances achieved using our unique bioinorganic platform are envisioned to accelerate the understanding and optimization of electrocatalytic processes involving proton- and electron- transfer steps that are fundamental to the development of high-performance energy devices.

Aldehyde-Mediated Protein-to-Surface Tethering via Controlled Diazonium Electrode Functionalization Using Protected Hydroxylamines

We report a diazonium electro-grafting method for the covalent modification of conducting surfaces with aldehyde-reactive hydroxylamine functionalities that facilitate the wiring of redox-active (bio)molecules to electrode surfaces. Hydroxylamine near-monolayer formation is achieved via a phthalimide-protection and hydrazine-deprotection strategy that overcomes the multilayer formation that typically complicates diazonium surface modification. This surface modification strategy is characterized using electrochemistry (electrochemical impedance spectroscopy and cyclic voltammetry), X-ray photoelectron spectroscopy, and quartz crystal microbalance with dissipation monitoring. Thus-modified glassy carbon, boron-doped diamond, and gold surfaces are all shown to ligate to small molecule aldehydes, yielding surface coverages of 150-170, 40, and 100 pmol cm^-2, respectively. Bioconjugation is demonstrated via the coupling of a dilute (50 μM) solution of periodate-oxidized horseradish peroxidase enzyme to a functionalized gold surface under biocompatible conditions (H₂O solvent, pH 4.5, 25 °C).

Self-Assembled Bilayers as an Anchoring Strategy: Catalysts, Chromophores, and Chromophore-Catalyst Assemblies

Anchoring strategies for immobilization of molecular catalysts, chromophores, and chromophore-catalyst assemblies on electrode surfaces play an important role in solar energy conversion devices such as dye-sensitized solar cells and dye-sensitized photoelectrosynthesis cells. They are also important in interfacial studies with surface-bound molecules including electron-transfer dynamics and mechanistic studies related to small molecule activation catalysis. Significant progress has been made in this area, but many challenges remain in terms of stability, synthetic complexity, and versatility. We report here a new anchoring strategy based on self-assembled bilayers. This strategy takes advantage of noncovalent interactions between long alkyl chains chemically bound to a metal-oxide electrode surface and long alkyl chains on the molecule being anchored. The new methodology is applicable to the heterogenization of both catalysts and chromophores as well as to the in situ "synthesis" of chromophore-catalyst assemblies on the electrode surface.