2D MOF with Compact Catalytic Sites for the One-pot Synthesis of 2,5-Dimethylfuran from Saccharides via Tandem Catalysis

One pot synthesis of 2,5-dimethylfuran (2,5-DMF) from saccharides under mild conditions is of importance for the production of biofuel and fine chemicals. However, the synthesis requires a multitude of active sites and suffers from slow kinetics due to poor diffusion in most composite catalysts. Herein, a metal-acid functionalized 2D metal-organic framework (MOF; Pd/NUS-SO3 H), as an ultrathin nanosheet of 3-4 nm with Lewis acid, Brønsted acid, and metal active sites, was prepared based on the diazo method for acid modification and subsequent metal loading. This new composite catalyst gives substantially higher yields of DMF than all reported catalysts for different saccharides (fructose, glucose, cellobiose, sucrose, and inulins). Characterization suggests that a cascade of reactions including polysaccharide hydrolysis, isomerization, dehydration, and hydrodeoxygenation takes place with rapid molecular interactions.

Highly Effective Activated Carbon-Supported Ni-Mn Bifunctional Catalyst for Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran

Designing highly efficient and low-cost catalysts for conversion of renewable biomass into high value-added chemicals and biofuels is important and challenging. Herein, a non-noble Ni-Mn bifunctional catalyst supported on activated carbon (Ni-Mn/AC) was developed by an incipient wetness impregnation method. The catalyst was found to be economic and efficient for the selective hydrodeoxygenation of biomass-derived 5-hydroxymethylfurfural (5-HMF) to 2,5-dimethylfuran (2,5-DMF). The optimal Ni-Mn/AC (Ni/Mn=3) catalyst achieved 98.5 % 2,5-DMF yield with 100 % conversion of 5-HMF under mild reaction conditions of 180 °C, 2.0 MPa H₂ for 4 h. Furthermore, the catalyst exhibited outstanding reusability and could be recycled eight times without loss of activity. The addition of Mn not only enhanced the reactivity of 5-HMF but also resulted in the dominant reaction pathway shift from the hydrogenation of the C=O bond to the hydrogenolysis of C-OH bond, which was attributed to the synergy of highly dispersed Ni metallic nanoparticles and moderate Lewis acid sites from MnO_x as revealed by detailed characterizations.

Recent Advances in Reductive Upgrading of 5-Hydroxymethylfurfural via Heterogeneous Thermocatalysis

The catalytic conversion of 5-hydroxymethylfufural (HMF), one of the vital platform chemicals in biomass upgrading, holds great promise for producing highly valuable chemicals through sustainable routes, thereby alleviating the dependence on fossil feedstocks and reducing CO₂ emissions. The reductive upgrading (hydrogenation, hydrogenolysis, ring-opening, ring-rearrangement, amination, etc.) of HMF has exhibited great potential to produce monomers, liquid fuel additives, and other valuable chemicals. Thermocatalytic conversion has a significant advantage over photocatalysis and electrocatalysis in productivity. In this Review, the recent achievements of thermo-reductive transformation of HMF to various chemicals using heterogeneous catalytic systems are presented, including the catalytic systems (catalyst and solvent), reaction conditions, (reaction temperature, pressure, etc.), and reaction mechanisms. The current challenges and future opportunities are discussed as well, aiming at guiding the catalyst design and practical scalable productions.

A unique Co@CoO catalyst for hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran

The development of precious-metal-free catalysts to promote the sustainable production of fuels and chemicals from biomass remains an important and challenging target. Here, we report the efficient hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran over a unique core-shell structured catalyst, Co@CoO that affords the highest productivity among all catalysts, including noble-metal-based catalysts, reported to date. Surprisingly, we find that the catalytically active sites reside on the shell of CoO with oxygen vacancies rather than the metallic Co. The combination of various spectroscopic experiments and computational modelling reveals that the CoO shell incorporating oxygen vacancies not only drives the heterolytic cleavage, but also the homolytic cleavage of H2 to yield more active Hδ- species, resulting in the exceptional catalytic activity. Co@CoO also exhibits excellent activity toward the direct hydrodeoxygenation of lignin model compounds. This study unlocks, for the first time, the potential of simple metal-oxide-based catalysts for the hydrodeoxygenation of renewable biomass to chemical feedstocks.

Insight into the dehydration of high-concentration fructose to 5-hydroxymethylfurfural in oxygen-containing polar aprotic solvents

A high 5-HMF yield of 85.4% was achieved in polar aprotic oxygen-containing solvent with strong electrophilic maleic acid by quenching DHH.

One-Step Reductive Amination of 5-Hydroxymethylfurfural into 2,5-Bis(aminomethyl)furan over Raney Ni

Simultaneous reductive amination of C=O and C-OH in 5-hydroxymethylfurfural (HMF) into C-NH₂ in 2,5-bis(aminomethyl)furan (BAMF) is challenging. In this work, reductive amination of C=O in HMF was firstly studied, in which HMF can be converted into 5-hydroxymethyl furfurylamine (HMFA) with a 99.5 % yield over Raney Co catalyst. BAMF was then directly synthesized with 82.3 % yield from HMF over Raney Ni catalyst at 160 °C for 12 h. An even higher yield of 88.3 % could be obtained through a stepwise reductive amination process, in which the reaction started at 120 °C for the first 2 h over Raney Co mainly for amination of C=O and then continued at 160 °C for another 10 h over Raney Ni mainly for amination of C-OH. Under optimized reaction conditions, the catalyst could be reused four times without obvious loss in catalytic performance. XRD and XPS characterization of the reused catalyst indicated that the formation of Ni₃ N and the adsorption of alkyl amines could be the main reasons for the deactivation of the catalyst. Moreover, plausible reaction pathways were proposed to originate the detected by-products according to the kinetic profiles.

Efficient hydrogenation of 5-hydroxymethylfurfural using a synergistically bimetallic Ru-Ir/C catalyst

Activated charcoal-dispersed Ru-Ir alloy nanoparticles (ca. 2.2 nm) are a selective and reusable hydrogenation catalyst for the conversion of 5-hydroxymethylfurfural to valuable liquid biofuel. A 99% yield to 2,5-dimethylfuran is achieved at only 120 °C. An acceleration in the reduction of substrate and intermediates is observed due to the synergistic effect between the Ru and Ir species.

Direct Production of 2,5-Dimethylfuran with High Yield from Fructose over a Carbon-Based Solid Acid-Coated CuCo Bimetallic Catalyst

A carbon-based solid acid, which functionalized with p-toluenesulfonic acid (TsOH), an encapsulated non-noble CuCo multifunctional heterogeneous catalyst was for the first time developed and used to catalyze the one-pot direct conversion of fructose into 2,5-dimethylfuran (2,5-DMF) without purification of 5-hydroxymethylfurfural (5-HMF) from the reaction solutions. Fructose was first transformed into intermediate 5-HMF over the outer shell carbon-based solid acid sites via dehydration, and subsequently 5-HMF was further converted to produce 2,5-DMF over the non-noble metal active sites in the core. As high as 71.1 mol % yield of 2,5-DMF was achieved in tetrahydrofuran at 220 °C and 3 MPa H₂ for 10 h, which is higher than the yield reported for the direct conversion of fructose to 2,5-DMF. Besides, the carbon-based solid acid-coated CuCo catalyst could be reused up to five times.

An Efficient and Reusable Embedded Ru Catalyst for the Hydrogenolysis of Levulinic Acid to γ-Valerolactone

To achieve a higher activity and reusability of a Ru-based catalyst, Ru nanoparticles were embedded in N-doped mesoporous carbon through a hard-template method. The catalyst showed excellent catalytic performance (314 h^-1 turnover frequency) and recyclability (reusable five times with 3 % activity loss) for the hydrogenolysis of levulinic acid to γ-valerolactone. Compared with the mesoporous carbon without N-doping and conventional activated carbon, the introduction of N-dopant effectively improved the dispersion of Ru nanoparticles, decreased the average size of Ru nanoparticles to as small as 1.32 nm, and improved the adsorption of levulinic acid, which contributed to the increase in the activity of the catalyst. Additionally, the embedding method increased the interaction between Ru nanoparticles and carbon support in contrast with the conventional impregnation method, thus preventing the Ru nanoparticles from migration, aggregation, and leaching from the carbon surface and therefore increasing the reusability of the catalyst.