Computational Fluid-Structure Interaction in Microfluidics

Micro elastofluidics is a transformative branch of microfluidics, leveraging the fluid-structure interaction (FSI) at the microscale to enhance the functionality and efficiency of various microdevices. This review paper elucidates the critical role of advanced computational FSI methods in the field of micro elastofluidics. By focusing on the interplay between fluid mechanics and structural responses, these computational methods facilitate the intricate design and optimisation of microdevices such as microvalves, micropumps, and micromixers, which rely on the precise control of fluidic and structural dynamics. In addition, these computational tools extend to the development of biomedical devices, enabling precise particle manipulation and enhancing therapeutic outcomes in cardiovascular applications. Furthermore, this paper addresses the current challenges in computational FSI and highlights the necessity for further development of tools to tackle complex, time-dependent models under microfluidic environments and varying conditions. Our review highlights the expanding potential of FSI in micro elastofluidics, offering a roadmap for future research and development in this promising area.

Improving the adsorption performance of non-polar benzene vapor by using lignin-based activated carbon

Both indoor and outdoor contamination continually contain benzene vapor. It has primary concerns about long-term health risks to the living environment. Benzene is a crucial airborne pollutant in the environment due to its apparent acute toxicity, high volatility, and poor degradability. It is especially urgent to restrain benzene emissions due to the persistent concentration increase and stringent processes. Benzene adsorption is a highly efficient mechanism with low cost, low energy consumption, and a simple process. In this study, biomass-derived porous carbon materials (TCACs) were synthesized by pyrolysis activation combined with H3PO4, HNO3, and HCl. TCAC44 has the best activation conclusion, showing that surface area and pore volume were 1107 m2/g and 0.58 cm3/g treated with H3PO4 and so was chosen for subsequent benzene adsorption/desorption tests. The adsorption capacities of benzene for TCAC44 were increased from 58 mg/g for 35 °C + 95% RH to 121 mg/g for 25 °C + 15% RH and presented a higher adsorption capacity of benzene than TCAC101 and TCAC133. Otherwise, well recyclability of TCAC44 was revealed as the benzene adsorption capacity reductions were 22.49% after five adsorption-desorption cycles. Furthermore, the present study established the property-application relationships to promote and encourage future research on the newly synthesized innovative TCAC44 for benzene removal.

Oxygen Vacancy Induced Strong Metal-Support Interactions on Ni/Ce0.8Zr0.2O2 Nanorod Catalysts for Promoting Steam Reforming of Toluene: Experimental and Computational Studies

To develop an efficient Ni-based steam reforming catalyst for tar removal from the products of biomass gasification, Ni/Ce_0.8Zr_0.2O₂ nanorods were designed. The Ni/Ce_0.8Zr_0.2O₂ nanorod was used as a catalyst in steam reforming of toluene, which was regarded as a model compound of biomass gasification tar. At gas hourly space velocity (GHSV) of 24,000 h^-1 and Ni loading of 5 wt %, the 5Ni/Ce_0.8Zr_0.2O₂ nanorod catalyst achieved 100% of toluene conversion at 600 °C. After 10 h of operation, toluene conversion still reached 87.6%, and the carbon deposition rate was only 1.9 mg/g_cat h^-1. The experimental results demonstrated that the 5Ni/Ce_0.8Zr_0.2O₂ nanorod catalyst showed much higher catalytic activity and coking resistance than other Ni-based catalysts reported in the literature. Through different characterization technologies and density functional theory calculations, it was confirmed that the excellent catalytic performance was attributed to the strong metal-support interaction (SMSI) between Ni and the {100} facet of Ce_0.8Zr_0.2O₂. The special surface structure of {100} allowed Ni atoms to anchor to the surface oxygen vacancies and maintained its reduced state by electron transport between surface atoms. The anchored Ni facilitated oxygen vacancies formation and H₂O dissociation on the support, while the support modulated the electronic structure of Ni, which promoted its ability to toluene activation.

Catalytic Tar Conversion in Two Different Hot Syngas Cleaning Systems

Tar in the product gas of biomass gasifiers reduces the efficiency of gasification processes and causes fouling of system components and pipework. Therefore, an efficient tar conversion in the product gas is a key step of effective and reliable syngas production. One of the most promising approaches is the catalytic decomposition of the tar species combined with hot syngas cleaning. The catalyst must be able to convert tar components in the synthesis gas at temperatures of around 700 °C downstream of the gasifier without preheating. A Ni-based doped catalyst with high activity in tar conversion was developed and characterized in detail. An appropriate composition of transition metals was applied to minimize catalyst coking. Precious metals (Pt, Pd, Rh, or a combination of two of them) were added to the catalyst in small quantities. Depending on the hot gas cleaning system used, both transition metals and precious metals were co-impregnated on pellets or on a ceramic filter material. In the case of a pelletized-type catalyst, the hot gas cleaning system revealed a conversion above 80% for 70 and 110 h. The catalyst composed of Ni, Fe, and Cr oxides, promoted with Pt and impregnated on a ceramic fiber filter composed of Al2O3(44%)/SiO2(56%), was the most active catalyst for a compact cleaning system. This catalyst was catalytically active with a naphthalene conversion of around 93% over 95 h without catalyst deactivation.

SERS Chemical Enhancement of 2,4,5-Trichlorophenoxyacetic Acid Adsorbed on Silver Substrate

Surface-enhanced Raman spectroscopy (SERS) was employed to gain an understanding of the chemical enhancement mechanism of 2,4,5-trichlorophenoxyacetic acid (2,4,5-T), an Agent Orange, adsorbed on a silver substrate surface. Experimental measurements were performed using a micro-Raman spectrophotometer with an excitation wavelength of 532 nm and successfully detected 2,4,5-T at a relatively low concentration of 0.4 nM. Density functional theory (DFT) calculations on the interactions of the 2,4,5-T molecule with some small silver clusters, Ag_n with n = 4, 8, and 20, as well as with extended Ag surfaces, demonstrate that the most stable adsorption configuration is formed via coordination of Cl9 sites and carbonyl C═O group on the 2,4,5-T ligand to the Ag atoms on surfaces. Analyses of charge transfer mechanism and frontier orbitals distributions show an electron transfer from 2,4,5-T to the cluster in the ground state, and an inversed trend occurs for the excited singlet state process, consequently leading to a chemical enhancement of SERS signals. The obtained results are of importance for subsequent work in guiding the design of mobile sensors specifically used for services of rapid screening and detection of these toxic compounds present in the environment, as well as agricultural and food products. Extensive computations pointed out that small silver clusters, in particular of Ag₂₀ size, can be used as appropriate models for a metal nanoparticle surface.

Realizing Catalytic Acetophenone Hydrodeoxygenation with Palladium-Equipped Porous Organic Polymers

Porous organic polymers (POPs) constructed through covalent bonds have raised tremendous research interest because of their suitability to develop robust catalysts and their successful production with improved efficiency. In this work, we have designed and explored the properties and catalytic activity of a template-free-constructed, hydroxy (-OH) group-enriched porous organic polymer (Ph-POP) bearing functional Pd nanoparticles (Pd-NPs) by one-pot condensation of phloroglucinol (1,3,5-trihydroxybenzene) and terephthalaldehyde followed by solid-phase reduction with H₂. The encapsulated Pd-NPs rested within well-defined POP nanocages and remained undisturbed from aggregation and leaching. This polymer hybrid nanocage Pd@Ph-POP is found to enable efficient liquid-phase hydrodeoxygenation (HDO) of acetophenone (AP) with high selectivity (99%) of ethylbenzene (EB) and better activity than its Pd@Al₂O₃ counterpart. Our investigation demonstrates a facile, scalable, catalyst-template-free methodology for developing novel porous organic polymer catalysts and next-generation efficient greener chemical processes from platform molecules to produce value-added chemicals. With the aid of comprehensive in situ ATR-IR spectroscopy experiments, it is suggested that EB can be more easily desorbed in a solution, reflecting from the much weaker but better-resolved signal at 1494 cm^-1 in Pd@Ph-POP compared to that in Pd@Al₂O₃, which is the key determining factor in favoring an efficient catalytic mechanism. Density functional theory (DFT) calculations were performed to illustrate the detailed reaction network and explain the high catalytic activity observed for the fabricated Pd@Ph-POP catalyst in the HDO conversion of AP to EB. All of the hydrogenation routes, including direct hydrogenation by surface hydrogen, hydrogen transfer, and the keto-enol pathway, are evaluated, providing insights into the experimental observations. The presence of phenolic hydroxyl groups in the Ph-POP frame structure facilitates the hydrogen-shuttling mechanism for dehydration from the intermediate phenylethanol, which was identified as a crucial step for the formation of the final product ethylbenzene. Besides, weaker binding of the desired product ethylbenzene and lower coverage of surface hydrogen atoms on Pd@Ph-POP both contributed to inhibiting the overhydrogenation reaction and explained well the high yield of EB produced during the HDO conversion of AP on Pd@Ph-POP in this study.

Interface Engineering of Graphene-Supported Cu Nanoparticles Encapsulated by Mesoporous Silica for Size-Dependent Catalytic Oxidative Coupling of Aromatic Amines

In this study, graphene nanosheet-supported ultrafine Cu nanoparticles (NPs) encapsulated with thin mesoporous silica (Cu-GO@m-SiO₂) materials are fabricated with particle sizes ranging from 60 to 7.8 nm and are systematically investigated for the oxidative coupling of amines to produce biologically and pharmaceutically important imine derivatives. Catalytic activity remarkably increased from 76.5% conversion of benzyl amine for 60 nm NPs to 99.3% conversion and exclusive selectivity of N-benzylidene-1-phenylmethanamine for 7.8 nm NPs. The superior catalytic performance along with the outstanding catalyst stability of newly designed catalysts are attributed to the easy diffusion of organic molecules through the porous channel of mesoporous SiO₂ layers, which not only restricts the restacking of the graphene nanosheets but also prevents the sintering and leaching of metal NPs to an extreme extent through the nanoconfinement effect. Density functional theory calculations were performed to shed light on the reaction mechanism and to give insight into the trend of catalytic activity observed. The computed activation barriers of all elementary steps are very high on terrace Cu(111) sites, which dominate the large-sized Cu NPs, but are significantly lower on step sites, which are presented in higher density on smaller-sized Cu NPs and could explain the higher activity of smaller Cu-GO@m-SiO₂ samples. In particular, the activation barrier for the elementary coupling reaction is reduced from 139 kJ/mol on flat terrace Cu(111) sites to the feasible value of 94 kJ/mol at step sites, demonstrating the crucial role of the step site in facilitating the formation of secondary imine products.

Integrated Experimental and Theoretical Study of Shape-Controlled Catalytic Oxidative Coupling of Aromatic Amines over CuO Nanostructures

We have synthesized CuO nanostructures with flake, dandelion-microsphere, and short-ribbon shapes using solution-phase methods and have evaluated their structure-performance relationship in the heterogeneous catalysis of liquid-phase oxidative coupling reactions. The formation of nanostructures and the morphological evolution were confirmed by transmission electron microscopy, scanning electron microscopy, X-ray diffraction analysis, X-ray photoelectron spectroscopy, Raman spectroscopy, energy-dispersive X-ray spectroscopy, elemental mapping analysis, and Fourier transform infrared spectroscopy. CuO nanostructures with different morphologies were tested for the catalytic oxidative coupling of aromatic amines to imines under solvent-free conditions. We found that the flake-shaped CuO nanostructures exhibited superior catalytic efficiency compared to that of the dandelion- and short-ribbon-shaped CuO nanostructures. We also performed extensive density functional theory (DFT) calculations to gain atomic-level insight into the intriguing reactivity trends observed for the different CuO nanostructures. Our DFT calculations provided for the first time a detailed and comprehensive view of the oxidative coupling reaction of benzylamine over CuO, which yields N-benzylidene-1-phenylmethanamine as the major product. CuO(111) is identified as the reactive surface; the specific arrangement of coordinatively unsaturated Cu and O sites on the most stable CuO(111) surface allows N-H and C-H bond-activation reactions to proceed with low-energy barriers. The high catalytic activity of the flake-shaped CuO nanostructure can be attributed to the greatest exposure of the active CuO(111) facets. Our finding sheds light on the prospective utility of inexpensive CuO nanostructured catalysts with different morphologies in performing solvent-free oxidative coupling of aromatic amines to obtain biologically and pharmaceutically important imine derivatives with high selectivity.