A Fabric-Based Strain Sensor with a Microbridge Structure and the Supercapacitor-Powered Integrated Sensing System

Developing fabric-based strain sensors with high sensitivity and stability is in high demand for wearable electronics. Herein, carbon nanotubes (CNTs) and polypyrrole (PPy) are coated on a thermoplastic polyurethane (TPU) fabric as strain sensors. A microbridge structure, in which CNT bridges the stretching-induced cracks, has been designed for the TPU-CNT-PPy strain sensor. The microbridge structure can significantly enhance the electrical resilience, ensuring the improved sensitivity and stability of strain sensors. As a result, our TPU-CNT-PPy strain sensors deliver high sensitivity (GF = 231.5) with a broad working range (150%) and fast response and recovery time (166/195 ms). In addition, our TPU-CNT-PPy could also be used as flexible electrodes of the microsupercapacitors (MSCs) as a power supplier for the integrated sensing system. The TPU-CNT-PPy-based MSCs exhibit a high specific capacitance (460.3 mF cm-2 at 0.5 mA cm-2) and excellent cycling stability (96.69% capacitance retention for 10,000 charge/discharge cycles). Finally, we demonstrated an integrated sensing system using TPU-CNT-PPy as both MSCs and strain sensors, where the current signals of the sensors could be well detected via Bluetooth. This study offers a microbridge strategy to fabricate strain sensors with high sensitivity and stability and develops an integrated sensing system for the actual applications of wearable electronics.

Hydrogenation of Furfural with Nickel Nanoparticles Stabilized on Nitrogen-Rich Carbon Core-Shell and Its Transformations for the Synthesis of γ-Valerolactone in Aqueous Conditions

In this article, we report the synthesis of nitrogen-rich carbon layer-encapsulated Ni(0) nanoparticles as a core-shell structure (Ni@N/C-g-800) for the catalytic hydrogenation of furfural to furfuryl alcohol. The nickel nanoparticles were stabilized by the nitrogen-rich graphitic framework, which formed during the agitation of nickel acetate-impregnated cucurbit[6]uril surface in a reducing atmosphere. Furthermore, the catalyst was characterized using various physicochemical methods such as powder X-ray diffraction, Raman, field emission-scanning electron microscopy, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller surface area, CO₂-temperature-programmed desorption, inductive coupled plasma, and CHN analyses. The nitrogen-rich environment of the solid support with metallic Ni nanoparticles was found to be active and selective for the catalytic hydrogenation of furfural with molecular H₂ in an aqueous medium at 100 °C. To understand the reaction mechanism, the diffuse reflectance infrared Fourier transform study was performed, which revealed that the C═O bond is activated in the presence of a catalyst. In addition, we have extended our methodology toward the synthesis of "levulinic acid" and "γ-valerolactone", by successive hydrolysis and hydrogenation of furfuryl alcohol and levulinic acid, respectively, in an aqueous medium. Moreover, the heterogeneous catalysts used in all of the three consecutive steps help in recovery and recycling of the catalyst and easy separation of products.

Hybrid Mo-C T Nanowires as Highly Efficient Catalysts for Direct Dehydrogenation of Isobutane

Direct dehydrogenation of isobutane to isobutene has drawn extensive attention for synthesizing various chemicals. The Mo-based catalysts hold promise as an alternative to the toxic CrO _x- and scarce Pt-based catalysts. However, the low activity and rapid deactivation of the Mo-based catalysts greatly hinder their practical applications. Herein, we demonstrate a feasible approach toward the development of efficient and non-noble metal dehydrogenation catalysts based on Mo-C _T hybrid nanowires calcined at different temperatures. In particular, the optimal Mo-C₇₀₀ catalyst exhibits isobutane consumption rate of 3.9 mmol g^-1 h^-1 and isobutene selectivity of 73% with production rate of 2.8 mmol g^-1 h^-1. The catalyst maintained 90% of its initial activity after 50 h of reaction. Extensive characterizations reveal that such prominent performance is well correlated with the adsorption abilities of isobutane and isobutene and the formation of η-MoC species. In contrast, the generation of β-Mo₂C crystalline phase during long-term reaction causes minor decline in activity. Compared to MoO₂ and β-Mo₂C, η-MoC plays a role more likely in suppressing the cracking reaction. This work demonstrates a feasible approach toward the development of efficient and non-noble metal dehydrogenation catalysts.

Nitrogen-rich graphitic-carbon stabilized cobalt nanoparticles for chemoselective hydrogenation of nitroarenes at milder conditions

Herein, we report the synthesis of nitrogen-rich graphitic-carbon supported cobalt nanoparticles and its application for the hydrogenation of nitroarenes in the water-THF mixture at 50 °C with maximum TOF of 14 117 h⁻¹.