Contrasting Metallic (Rh0) and Carbidic (2D-Mo2C MXene) Surfaces in Olefin Hydrogenation Provides Insights on the Origin of the Pairwise Hydrogen Addition

Kinetic studies are vital for gathering mechanistic insights into heterogeneously catalyzed hydrogenation of unsaturated organic compounds (olefins), where the Horiuti-Polanyi mechanism is ubiquitous on metal catalysts. While this mechanism envisions nonpairwise H2 addition due to the rapid scrambling of surface hydride (H*) species, a pairwise H2 addition is experimentally encountered, rationalized here based on density functional theory (DFT) simulations for the ethene (C2H4) hydrogenation catalyzed by two-dimensional (2D) MXene Mo2C(0001) surface and compared to Rh(111) surface. Results show that ethyl (C2H5*) hydrogenation is the rate-determining step (RDS) on Mo2C(0001), yet C2H5* formation is the RDS on Rh(111), which features a higher reaction rate and contribution from pairwise H2 addition compared to 2D-Mo2C(0001). This qualitatively agrees with the experimental results for propene hydrogenation with parahydrogen over 2D-Mo2C1-x MXene and Rh/TiO2. However, DFT results imply that pairwise selectivity should be negligible owing to the facile H* diffusion on both surfaces, not affected by H* nor C2H4* coverages. DFT results also rule out the Eley-Rideal mechanism appreciably contributing to pairwise addition. The measurable contribution of the pairwise hydrogenation pathway operating concurrently with the dominant nonpairwise one is proposed to be due to the dynamic site blocking at higher adsorbate coverages or another mechanism that would drastically limit the diffusion of H* adatoms.

Ni -chitosan/carbon nanotube: An efficient biopolymer -inorganic catalyst for selective hydrogenation of acetylene

This work developed an efficient Ni catalyst based on chitosan for selective hydrogenation of acetylene. The Ni catalyst was prepared by the reaction of the chitosan/carbon nanotube composite with NiSO₄ solution. The synthesized Ni-chitosan/carbon nanotube catalyst was characterized by inductively coupled plasma, FTIR, SEM and XRD. The results of FTIR and XRD demonstrated that Ni²⁺ successfully coordinated with chitosan. The addition of chitosan greatly improved the catalytic performances of Ni-chitosan/carbon nanotube catalyst. Over the Ni-chitosan/carbon nanotube catalyst, both the acetylene conversion and the selectivity to ethylene all achieved 100% at 160 °C and 190 °C, respectively. The catalytic performances of 6 mg Ni-chitosan/carbon nanotube catalyst were even better than that of 400 mg Ni single atom catalyst in literature. Extending the crosslinking time of chitosan and increasing the amount of the crosslinking agent were beneficial to enhance the catalytic effect of Ni-chitosan/carbon nanotube catalyst.

Cu Catalysts Doped with a Heteroatom into the Subsurface: Unraveling the Role of Subsurface Chemistry in Tuning the Catalytic Performance of C2H2 Selective Hydrogenation

Heteroatoms doped into the subsurface of transition metals play a vital role in heterogeneous catalysis via either expressing surface structures or even directly participating in the reaction. Herein, DFT calculations and microkinetic modeling are implemented to examine C₂H₂ selective hydrogenation over heteroatom (H, B, C, N, or P)-doped Cu(111) and Cu(211) subsurfaces, which are compared with pure Cu(111) and Cu(211) to unravel the role of subsurface chemistry in tuning the surface structure and further regulating catalytic performance. Our results indicate that the catalytic performance toward C₂H₂ selective hydrogenation is closely related to the type of doped subsurface heteroatom and the Cu surface coordination environment, which can be attributed to the simultaneous change of Cu surface geometric and electronic structures. Catalytic performance improvement over the heteroatom-doped Cu(111) is generally better than that over the doped Cu(211); especially, B- or N-doped Cu(111) has excellent C₂H₄ activity and selectivity and greatly inhibits green oil. For the heteroatom-doped Cu(211), better performance is only obtained on P-Cu(211), which is still lower than the B- and N-doped Cu(111). The subsurface heteroatom doping should focus on high-coordination Cu(111) instead of low-coordination Cu(211). AIMD simulations verified the thermal stability of B-Cu(111) and N-Cu(111); both were screened out to be the most suitable catalysts toward C₂H₂ hydrogenation. This work clearly unravels the role of subsurface chemistry in heterogeneous catalysis and contributes to the rational design of high-performance metal catalysts by tuning surface structures with the heteroatom into the subsurface.

Effect of point defects on acetylene hydrogenation reaction over Ni(111) surface: a density functional theory study

Density functional theory (DFT) calculations are carried out to investigate the effect of point defects on acetylene hydrogenation reaction over Ni(111) surface with three different defect concentrations (DC = 0.0500, 0.0625, and 0.0833), compared with the perfect Ni(111) surface. The adsorptions of C₂ species and H atoms and the mechanism of acetylene hydrogenation via the ethylene pathway are systematically analyzed. The results indicate that the existence of defects will make C₂ species and H atoms more inclined to adsorb near the defects. Introducing an appropriate amount of point defect concentration can enhance the catalytic activity and ethylene selectivity of Ni. In this work, DC = 0.0625 Ni(111) surface has the highest catalytic activity and selectivity of ethylene. This work provides useful theoretical information on the effect of defects on acetylene hydrogenation and is helpful for the design of Ni and related metal catalysts with defects.

Grafting nanometer metal/oxide interface towards enhanced low-temperature acetylene semi-hydrogenation

Metal/oxide interface is of fundamental significance to heterogeneous catalysis because the seemingly “inert” oxide support can modulate the morphology, atomic and electronic structures of the metal catalyst through the interface. The interfacial effects are well studied over a bulk oxide support but remain elusive for nanometer-sized systems like clusters, arising from the challenges associated with chemical synthesis and structural elucidation of such hybrid clusters. We hereby demonstrate the essential catalytic roles of a nanometer metal/oxide interface constructed by a hybrid Pd/Bi₂O₃ cluster ensemble, which is fabricated by a facile stepwise photochemical method. The Pd/Bi₂O₃ cluster, of which the hybrid structure is elucidated by combined electron microscopy and microanalysis, features a small Pd-Pd coordination number and more importantly a Pd-Bi spatial correlation ascribed to the heterografting between Pd and Bi terminated Bi₂O₃ clusters. The intra-cluster electron transfer towards Pd across the as-formed nanometer metal/oxide interface significantly weakens the ethylene adsorption without compromising the hydrogen activation. As a result, a 91% selectivity of ethylene and 90% conversion of acetylene can be achieved in a front-end hydrogenation process with a temperature as low as 44 °C.

Metal/oxide interface is of fundamental significance to heterogeneous catalysis. Here, the authors construct a nanometer Pd/Bi₂O₃ interface by grafting Pd clusters onto Bi₂O₃ clusters and demonstrate its essential roles in the low-temperature semi-hydrogenation of acetylene.

Dynamics of Initial Hydrogen Spillover from a Single Atom Platinum Active Site to the Cu(111) Host Surface: The Impact of Substrate Electron-Hole Pairs

The initial impulsive diffusion of hot hydrogen atoms resulted from the dissociative chemisorption of H₂ at atomically dispersed Pt atoms embedded in Cu(111) is investigated using ab initio molecular dynamics. Upon dissociation, one of the two hydrogen atoms tends to roam away from the dissociation site while the other remains trapped. It is shown that the fraction of diffusion and the average diffusion length increase with the incident energy and H₂ vibrational excitation, due apparently to the increased initial kinetic energy of the hot atoms. Most importantly, the strong interaction with surface electron-hole pairs, modeled using an electronic friction model, is shown to play an important role in rapid energy dissipation and significant retardation of the impulsive diffusion.

Addressing the uncertainty of DFT-determined hydrogenation mechanisms over coinage metal surfaces

Density functional theory (DFT) has been considered as a powerful tool for the identification of reaction mechanisms. However, it is still unclear whether the error of DFT calculations would lead to mis-identification of mechanisms. Here, taking the hydrogenation of acetylene and 1,3-butadiene as model reactions and employing a well-trained Bayesian error estimation functional with van der Waals correlation (BEEF-vdW), we try to estimate the error of DFT calculation results statistically, and therefore predict the reliability of the hydrogenation mechanisms identified. With an ensemble of 2000 functionals obtained around the BEEF-vdW functional as well as a descriptor developed to represent the possibility of different mechanisms, we found that the non-Horiuti-Polanyi mechanism is preferred on Ag(211) and Au(211), while the Horiuti-Polanyi mechanism is dominant on Cu(211). We further discovered that the descriptor is linearly correlated with the adsorption energies of reaction intermediates during acetylene and butadiene hydrogenation, and the hydrogenation of strongly adsorbed species are more likely to follow the Horiuti-Polanyi mechanism. We found the probability of following the non-HP mechanism obeys the order Cu(211) < Au(211) < Ag(211). Our work gives a more comprehensive explanation for the mechanisms of coinage metal catalyzed hydrogenation reactions, and also provides more theoretical insights into the development of new high-performance catalysts for selective hydrogenation reactions.

Influence of surface defects on activity and selectivity: a quantitative study of structure sensitivity of Pd catalysts for acetylene hydrogenation

The structure sensitivity of Pd catalysed acetylene hydrogenation is quantitatively examined using a coverage-dependent microkinetic model. Pd(211) was found to be more active than Pd(111), but present a poorer selectivity toward ethylene.

Fast prediction of oxygen reduction reaction activity on carbon nanotubes with a localized geometric descriptor

By using the pyramidalization angle as a localized geometric descriptor for oxygen reduction reaction (ORR) activity of carbon nanotubes (CNTs), we show the ORR activity of these systems can be readily predicted with mere structural optimization of CNTs.

A DFT Study of Acetylene Hydrogenation Catalyzed by S-Doped Pd1/g-C3N4

To exploit the excellent properties of g-C3N4, more and more studies have been carried out in various fields in recent years to improve the selectivity of catalysts, especially for selective acetylene hydrogenation. To our best knowledge, Pd catalyst is of great importance to hydrogenate acetylene in ethylene feed. Though we have explored the hydrogenation of acetylene catalyzed by Pd1/g-C3N4 before, doping with non-metals has never been studied. In this work, the mechanisms of selective hydrogenation of acetylene to ethylene on S-doped Pd1/g-C3N4 were investigated and we also compared this result with undoped Pd1/g-C3N4. By comparing the activation energy and selectivity of undoped Pd1/g-C3N4 with those of S-doped C and N sites of Pd1/g-C3N4, we found that S-doped C sites can improve the reactivity, but with a poor selectivity, while the activity of S atom doped N sites was not improved, but the selectivity has improved. Our work provides significant insights to explore the development of high efficiency non-metallic doping single metal atoms supported on 2D layered materials.

Theoretical study on the reaction mechanism and selectivity of acetylene semi-hydrogenation on Ni-Sn intermetallic catalysts

Recently, Ni-Sn intermetallic compounds (IMCs) with unique geometric structures have been proved to be selective catalysts for acetylene hydrogenation to ethylene, but the origin of the selectivity remains unclear. In this work, a density functional theory (DFT) study has been carried out to investigate the mechanism of acetylene hydrogenation on six surfaces of Ni-Sn IMCs, and the geometric effects towards ethylene selectivity were revealed. Two key parameters (adsorption energy and the hydrogenation barrier of ethylene), which determine the ethylene selectivity, were studied quantitatively. The adsorption sites for C2Hy (y = 2, 3, 4) can be classified into three types: Type 1 (Ni3Sn(111) and Ni3Sn2(101)-2) with Ni trimers, Type 2 (Ni3Sn(001) and Ni3Sn2(001)) with Ni monomers, and Type 3 (Ni3Sn2(101) and Ni3Sn2(001)-2) with reconstructed metal trimers. The adsorption energy (Ead) decreases following the order: Type 1 > Type 3 > Type 2, which indicates that the adsorption strength depends significantly on site ensemble: a more isolated Ni site would facilitate the desorption of ethylene. However, the surface roughness mainly dominates the hydrogenation barrier of ethylene. Either low or high roughness decreases the interactions between H and C2H4 (Eint), resulting in an enhanced energy barrier for over-hydrogenation of C2H4 (Ea,hydr); while moderate roughness benefits Eint and lowers Ea,hydr. The selectivity to ethylene is denoted as ΔEa = Ea,hydr - |Ead|, thus depending on the interplay of site ensemble effects and surface roughness. From this point of view, Ni3Sn(001) and Ni3Sn2(101) surfaces with well-isolated Ni ensembles and low (or high) surface roughness exhibit decreased |Ead| and increased Ea,hydr, giving rise to excellent selectivity to ethylene. This work provides significant understanding of the origin of ethylene selectivity in terms of geometric effects, which gives helpful instruction for the design and preparation of intermetallic catalysts for acetylene semi-hydrogenation.

Topological self-template directed synthesis of multi-shelled intermetallic Ni3Ga hollow microspheres for the selective hydrogenation of alkyne

Multi-shelled hollow structured materials featuring large void volumes and high specific surface areas are very promising for a variety of applications. However, controllable synthesis of multi-shelled hollow structured intermetallic compounds remains a formidable challenge due to the high annealing temperature commonly required for the formation of intermetallic phases. Here, a topological self-template strategy was developed to solve this problem. Using this strategy, we prepared well-defined multi-shelled intermetallic Ni3Ga hollow microspheres (Ni3Ga-MIHMs) as disclosed by the HAADF-STEM, HRTEM, and EDS characterizations, and the BET specific surface areas of them measured as much as 153.4 m2 g-1. XRD and EXAFS spectral characterizations revealed the atomically ordered intermetallic phase nature of the Ni3Ga-MIHMs. The selective hydrogenation of acetylene catalytic evaluation results further demonstrated excellent catalytic properties of the Ni3Ga-MIHMs, which results from the more energetically facile reaction pathway for acetylene hydrogenation and ethylene desorption over it as revealed by DFT calculations. Besides, this strategy is also extendable to synthesize other multi-shelled intermetallic Ni3Sn4 hollow microspheres, and is expected to open up new opportunities for rational design and preparation of novel structured and highly efficient intermetallics.

The DFT study of Si-doped Pd6Si clusters for selective acetylene hydrogenation reaction

Recently, it has been demonstrated that Si-modified Pd catalyst shows excellent selectivity and produces less amount of green oil than the unmodified Pd catalyst in acetylene hydrogenation. Motivated by experiment works, we systematically investigate the mechanism of the selective acetylene hydrogenation reactions over pristine Pd₇ and Si-doped Pd₆Si clusters by using the B3LYP method of density functional theory. Our result confirms that both the Pd₇ and Pd₆Si clusters catalytic hydrogenation of acetylene are mainly through two different pathways and a series of intermediates can be transformed into each other by proton transfer, which link the two independent reaction paths into a network path. Among these reaction paths, activation energies for all steps of the reaction have been calculated and it is illustrated that the lowest activation energy in the process of ethylene generation are 22.59 kcal/mol for Pd₇ cluster and 11.25 kcal/mol for Pd₆Si cluster, which indicate that the Pd₆Si cluster perform better than Pd₇ cluster in the aspect of catalytic activity. Besides, it has also been demonstrated that the selectivity for the reaction is enhanced after doping a Si atom.

The reaction mechanism and selectivity of acetylene hydrogenation over Ni–Ga intermetallic compound catalysts: a density functional theory study

A Ga-rich NiGa(111) surface significantly reduces the adsorption strength of acetylene and ethylene, and shows high selectivity to ethylene for acetylene semihydrogenation.

Surface restructuring of Cu-based single-atom alloy catalysts under reaction conditions: the essential role of adsorbates

The stabilities and catalytic performances of single-atom alloy (SAA) structures under the reaction conditions of acetylene hydrogenation are thoroughly examined utilizing density functional theory (DFT) calculations.

Theoretical understanding on the selectivity of acrolein hydrogenation over silver surfaces: the non-Horiuti–Polanyi mechanism is the key

The significance of the non-Horiuti–Polanyi mechanism in understanding heterogeneous catalytic hydrogenation reactions is highlighted.

Selective hydrogenation of alkynes over ppm-level Pd/boehmite/Al2O3 beads in a continuous-flow reactor

High activity and selectivity to the semi-hydrogenated products for alkyne hydrogenation over ppm-level Pd/boehmite/Al₂O₃ beads in a safe continuous-flow reactor.