Cd2+-Selective Fluorescence Enhancement of Bisquinoline Derivatives with 2-Aminoethanol Skeleton

The development of fluorescent Cd2+ sensors requires strict selectivity over Zn2+ because of the high availability of Zn2+ in the natural environment. In this paper, bisquinoline-based fluorescent sensors with a 2-aminoethanol backbone were investigated. The weak coordination ability of quinoline compared to well-studied pyridine is suitable for Cd2+ selectivity rather than Zn2+. In the presence of 3 equiv. of metal ions, TriMeO-N,O-BQMAE (N,O-bis(5,6,7-trimethoxy-2-quinolylmethyl)-2-methylaminoethanol (3)), as well as its N,N-isomer TriMeO-N,N-BQMAE (N,N-bis(5,6,7-trimethoxy-2-quinolylmethyl)-2-methoxyethylamine (6)), exhibits Cd2+-selective fluorescence enhancement over Zn2+ in DMF-HEPES buffer (1:1, 50 mM HEPES, 0.1 M KCl, pH = 7.5) (IZn/ICd = 26-34%), which has similar selectivity in comparison to the corresponding ethylenediamine derivative TriMeOBQDMEN (N,N'-bis(5,6,7-trimethoxy-2-quinolylmethyl)-N,N'-dimethylethylenediamine) under the same experimental condition (IZn/ICd = 24%). The fluorescence mechanisms of N,O- and N,N-isomers of BQMAE are quite different, judging from the fluorescence lifetimes of their metal complexes. The Cd2+ complex with TriMeO-N,O-BQMAE (3) exhibits a long fluorescence lifetime similar to that of TriMeOBQDMEN via intramolecular excimer emission, whereas the Cd2+ complex with TriMeO-N,N-BQMAE (6) exhibits a short lifetime from monomer emission.

Fabrication of reusable probe impregnated polymer monolithic sensor for the visual detection of Cd2+ in natural waters and cigarette samples

This work demonstrates the fabrication of a simple, low-cost naked-eye colorimetric solid-state sensor model for selective sensing of Cd2+. The sensor was developed using a polymer monolithic architect; namely, poly(n-allylthiourea-co-ethyleneglycol dimethacrylate) (poly(ATU-co-EGD) imbued with the chromophoric probe, 3-(quinoline-8-yldiazenyl)quinoline-2,4-diol (QYQD). The concocted indigenous perforated structural assemblies were studied through various microscopic, spectroscopic, and diffraction techniques. The template possessed a uniform arrangement of interconnected macro/mesoporous networks available for the maximum hooking of the QYQD probe moieties for the rapid and enhanced Cd2+ sensing process. The developed sensor offered an enhanced solid-state color transition response from yellow to dark meron for a proportional concentration increase of Cd2+ exhibiting precise absorption spectra with λmax at 475 nm. The relative stoichiometric binding ratio of the QYQD probe with Cd2+ was observed to be 2:1. The enhanced working conditions of the developed poly(ATU-co-EGD)QYQD sensor were tuned by validating various analytical conditions. The sensor exhibited a linear response signal from 2 to 150 ppb of Cd2+, and the corresponding LOD and LOQ values were 0.31 and 1.03 ppb, respectively. The efficacious performance drive of the sensor was validated in real water and cigarette samples that showed excellent data accuracy with a recovery value of ≥ 99.72% (n = 3).

Fluorescent RET-Based Chemosensor Bearing 1,8-Naphthalimide and Styrylpyridine Chromophores for Ratiometric Detection of Hg2+ and Its Bio-Application

Dyad compound NI-SP bearing 1,8-naphthalimide (NI) and styrylpyridine (SP) photoactive units, in which the N-phenylazadithia-15-crown-5 ether receptor is linked with the energy donor naphthalimide chromophore, has been evaluated as a ratiometric fluorescent chemosensor for mercury (II) ions in living cells. In an aqueous solution, NI-SP selectively responds to the presence of Hg²⁺ via the enhancement in the emission intensity of NI due to the inhibition of the photoinduced electron transfer from the receptor to the NI fragment. At the same time, the long wavelength fluorescence band of SP, arising as a result of resonance energy transfer from the excited NI unit, appears to be virtually unchanged upon Hg²⁺ binding. This allows self-calibration of the optical response. The observed spectral behavior is consistent with the formation of the (NI-SP)·Hg²⁺ complex (dissociation constant 0.13 ± 0.04 µM). Bio-imaging studies showed that the ratio of fluorescence intensity in the 440–510 nm spectral region to that in the 590–650 nm region increases from 1.1 to 2.8 when cells are exposed to an increasing concentration of mercury (II) ions, thus enabling the detection of intracellular Hg²⁺ ions and their quantitative analysis in the 0.04–1.65 μM concentration range.

A new diformyl phenol based chemosensor selectively detects Zn2+ and Co2+ in the nanomolar range in 100% aqueous medium and HCT live cells

A new diformyl phenol based chemosensor that can sense Zn2+ and Co2+ in the nanomolar range in 100% aqueous solution and in HCT cells was explored.

A novel AIE-active camphor-based fluorescent probe for simultaneous detection of Al3+ and Zn2+ at dual channels in living cells and zebrafish

A novel dual-functional probe N'-(2-hydroxy-5-((4,7,7-trimethyl-3-oxobicyclo[2.2.1] heptan-2-ylidene)methyl) benzylidene)picolinohydrazide (PSH) was constructed from natural camphor. This probe showed strong yellow-green fluorescence at 535 nm due to its aggregation-induced emission (AIE) feature. Interestingly, the probe PSH displayed a significant turn-on fluorescence response towards Al³⁺ (green fluorescence at 500 nm) and Zn²⁺ (orange fluorescence at 555 nm) at two different emissive channels. The detection limits of PSH towards Al³⁺ and Zn²⁺ were found to be 12.1 nM and 14.2 nM, respectively. PSH exhibited excellent selectivity and anti-interference performance and could distinguish between Al³⁺/Zn²⁺ and identify whether Zn²⁺ exists in the PSH-Al³⁺ complex by adding ATP. The binding mechanisms between PSH and Al³⁺/Zn²⁺ ions were supported by ¹H NMR, HRMS analysis, and density functional theory (DFT) calculations. Based on its outstanding sensing properties, the probe PSH was used to establish molecular logic function gates. Moreover, the probe PSH could be applied to detect Al³⁺ and Zn²⁺ in real environmental water, and fluorescence detection was well demonstrated by test strips. Furthermore, the probe PSH was employed for imaging Al³⁺ and Zn²⁺ in HeLa cells and zebrafish.

A novel chemosensor for the distinguishable detections of Cu2+ and Hg2+ by off-on fluorescence and ratiometric UV-visible absorption

A novel dual-functional chemosensor, derived from the conjugation of rhodamine B with a quinoline derivative (RHQ), was firstly synthesized with high efficiency and cost-effectiveness for the distinguishable detections of Cu²⁺ and Hg²⁺ via ring-opening and ring-forming mechanism. The chemosensor exhibits highly selective and distinguishable responses for Cu²⁺ and Hg²⁺ in CH₃CN-H₂O (4:1, v/v) with off-on fluorescence and ratiometric ultraviolet-visible (UV-Vis) absorption changes. Additionally, Cu²⁺ is identified by opening a rhodamine spirocycle with a UV-Vis absorption band, at around 560 nm and fluorescence turn-on. Interestingly, Hg²⁺ is discerned by opening the rhodamine spirocycle and by generating a new special cycle for the quinoline unit. Resultantly, there were two UV-Vis absorption bands at around 365 nm and 560 nm, which were accompanied by fluorescence turn-on. Moreover, the chemosensor can quantitatively detect Cu²⁺ and Hg²⁺ by off-on fluorescence and ratiometric UV-Vis absorption changes, respectively. Furthermore, the chemosensor with low cytotoxicity could be successfully administered to monitor Cu²⁺ and Hg²⁺ in living cells. This work may pay the way for the development of dual-functional chemosensor for quantificationally detecting metal ions in environmental and biological systems.

Ratiometric Detection of Mercury (II) Ions in Living Cells Using Fluorescent Probe Based on Bis(styryl) Dye and Azadithia-15-Crown-5 Ether Receptor

Bis(styryl) dye 1 bearing N-phenylazadithia-15-crown-5 ether receptor has been evaluated as a ratiometric fluorescent chemosensor for mercury (II) ions in living cells. In aqueous solution, probe 1 selectively responds to the presence of Hg²⁺ via the changes in the emission intensity as well as in the emission band shape, which is a result of formation of the complex with 1:1 metal to ligand ratio (dissociation constant 0.56 ± 0.15 µM). The sensing mechanism is based on the interplay between the RET (resonance energy transfer) and ICT (intramolecular charge transfer) interactions occurring upon the UV/Vis (380 or 405 nm) photoexcitation of both styryl chromophores in probe 1. Bio-imaging studies revealed that the yellow (500-600 nm) to red (600-730 nm) fluorescence intensity ratio decreased from 4.4 ± 0.2 to 1.43 ± 0.10 when cells were exposed to increasing concentration of mercury (II) ions enabling ratiometric quantification of intracellular Hg²⁺ concentration in the 37 nM-1 μM range.

Highly selective sensing of Fe3+/Hg2+ and proton conduction using two fluorescent Zn(ii) coordination polymers

A pair of homologues, [Zn(Hssa)(1,4-bib)·H2O]n (1) and [Zn3(ssa)2(1,4-bib)3·4H2O]n (2), were successfully assembled using the same metals and ligands [H3ssa = 5-sulfosalicylic acid; 1,4-bib = 1,4-bis(1H-imidazol-1-yl)benzene] under solvothermal conditions. Polymer 1 is a two-dimensional (2D) sql network and polymer 2 is a three-dimensional (3D) framework. Polymer 2 can be simplified into two topology types: bct and tfc. The two polymers show significant differences in the fluorescence sensing of metal ions and proton conductivity. Their applications in detecting metal ions and proton conductivity were explored. Polymer 1 shows high sensitivity and selectivity for Fe3+, while polymer 2 can detect Hg2+ ions. The limit of detection was 1.66 μM with Fe3+ for 1 and 0.23 μM with Hg2+ for 2 in water. In addition, both 1 and 2 exhibit high water stability and proton conductivity. At 60 °C and 95% relative humidity, their conductivities were 3.45 × 10-5 and 6.26 × 10-6 S cm-1, respectively. A detailed analysis of the Hirshfeld surface and fingerprints was carried out for 1 and 2 to compare the interactions between the molecules, which is essential for analysing the relationship between their structures and material properties.

Efficient Polymer Pendant Approach toward High Stable Organic Fluorophore for Sensing Ultratrace Hg2+ with Improved Biological Compatibility and Cell Permeability

A convenient and efficient method to eliminate the aggregation effect of organic photoelectric sensing materials and to improve biological compatibility and cell permeability as well was developed by hanging organic fluorophores on a polymer chain, for example, fluorescein fluorophores had been controllably hung on polyacrylamide main chains with a 1:2 stoichiometric ratio by a simple copolymerization strategy. The results showed that introduction of water-soluble bioactive polyacrylamide main chains into fluorescein fluorophores via covalent bonds could effectively improve their optical stability by deteriorating π-π stack and charge-transfer interactions among different fluorophores. More importantly, the resultant materials possessed low toxicity and excellent cell permeability ten times larger than their precursor fluorescein fluorophore, which made it express an especially turn-on fluorescent response to ultratrace Hg²⁺ both in aqueous and living cells by forming stable 5-member-ring complexes with Hg²⁺ with a correlation coefficient of 0.997 and a low detection limit of 4.0 × 10^-10 mol·L^-1. This work provides promising insight into constructing some practical sensing materials for environmentally-friendly biological analyses.

A dual fluorescence probe for Zn2+ and Al3+ through differentially response and bioimaging in living cells

A novel Schiff base fluorescent probe 7-Hydroxy-8-(((2-(hydroxymethyl)quinolin-8-yl)imino)methyl)-coumarin (XL) consist of formylcoumarin and aminoquinoline moieties was synthesized for dual detection of Zn²⁺ and Al³⁺ ions. Probe XL exhibited high selective and sensitive response towards Zn²⁺ and Al³⁺ ions through different color changes and significant fluorescence turn-on response (270 fold higher for Zn²⁺ and 230 fold higher for Al³⁺) in MeOH-H₂O (4/1, v/v) over other cations, with detection limits (LOD) as low as 3.75 × 10^-8 and 1.14 × 10^-8 M, respectively. Moreover, probe XL exhibited preferential selectivity for Al³⁺ through displacing Zn²⁺ from the XL-Zn²⁺ complex by ligand-to-ligand transfer process. The binding mechanism of intramolecular charge transfer (ICT) were proposed from fluorescence and UV-vis titrations, Job's plot, ¹H NMR titration, HRMS and DFT calculations. The probe was proven to be suitable for actual samples detection of Zn²⁺ and Al³⁺ ions. The complex XL-Zn²⁺ and XL-Al³⁺ exhibited dramatic fluorescent "turn-off" properties for PPi and PPi/F^- respectively through snatching metal ions and released free XL. Moreover, probe XL showed low biotoxicity and sequentially "off-on-off" fluorescent bio-imaging of Zn²⁺/Al³⁺ and PPi/F^- in PC12 cells.

A coumarin derivative as a "turn-on" fluorescence probe toward Cd2+ in live cells

A novel coumarin-derived Schiff base fluorescence probe (CTB) has been successfully designed and synthesized through exploiting tris-(2-aminothyl)-amine moiety as a recognition unit for the highly selective and sensitive detection of Cd²⁺. It is based on CN isomerization and the photo-induced electron transfer (PET) mechanism. The investigation into the sensing processes showed that CTB exhibited an excellent selectivity for Cd²⁺. The sensitivity exceeded that of other competing metal ions, and had a high sensitivity, a detection limit of 1.16 × 10^-7 M with the association constants of 1.37 × 10¹¹ M^-2. The experiments including Job's plot, UV-Vis titration, ¹H NMR titration and ESI-MS spectrum established that the probe CTB binds to Cd²⁺ in a 1:2 ratio. Further studies also demonstrated that probe CTB can be successfully applied to the fluorescence imaging of Cd²⁺ in HepG-2 cells.

A Novel Ratiometric Fluorescent Probe for Mercury (II) ions and Application in Bio-imaging

Since the accumulation of mercury (II) ions in the environment and ecosystem causes serious problems to environment and disease, the recognition of Hg2+ ions and its bio-imaging is of high importance. In sight of the advantages of fluorescence probes, a new probe (PMH) was facilely synthesized by incorporating phenylimidazole fluorophore and 3-methyl-2- benzothiazolinone hydrazone hydrochloride monohydrate. The PMH probe exhibited a ratiometric response for Hg2+ ions with fluorescence intensity increasing at 520 nm and decreasing at 445 nm simultaneously. The PMH probe interacted with Hg2+ ions in seconds with high optical stability and showed good selectivity over other metal ions. In addition, the probe has excellent biocompatibility and imaging performance in cells and zebrafish.

A simple Schiff base as dual-responsive fluorescent sensor for bioimaging recognition of Zn2+ and Al3+ in living cells

A simple Schiff base fluorescent sensor (BDNOL) was synthesized from the reaction of picolinohydrazide and 4-(diethylamino)salicylaldehyde, and developed for selective detection of Al³⁺ and Zn²⁺. This non-fluorescent sensor displayed obvious fluorescence enhancement after binding to Al³⁺/Zn²⁺ ions with high sensitivity and selectivity, accompanied by obvious fluorescence emission enhancement (504 nm for Al³⁺ and 575 nm for Zn²⁺). The detection limits were found to be 8.30 × 10^-8 M for Al³⁺ and 1.24 × 10^-7 M for Zn²⁺. The binding mechanisms between BDNOL and Al³⁺/Zn²⁺ ions were supported by ¹H NMR and HR-MS analysis, and a density functional theory (DFT) study. The sensing behavior was also studied with molecular logic functions of OR, AND, and NOT gates. Furthermore, the fluorescent sensor was successfully used to recognize Al³⁺ and Zn²⁺ in living cells, suggesting that this simple biosensor has great potential in biological imaging applications.

Polymerization led selective detection and removal of Zn2+and Cd2+ions: isolation of Zn- and Cd-MOFs and reversibility studies

Two post-functionalized chemosensors display remarkable sensing of Zn²⁺and Cd²⁺ionsviagenerating corresponding metal–organic frameworks (MOFs), whereas nitrate and nitrite ions reverse the MOF-polymerization process.

Development and applications of two colorimetric and fluorescent indicators for Hg2+ detection

Two rhodamine-active probes RBAI (Rhodamine B-di-Aminobenzene-phenyl Isothiocyanate) and RGAI (Rhodamine 6G-di-Aminobenzene-phenyl Isothiocyanate) were designed, synthesized and characterized. The probes were developed as fluorescent and colorimetric chemodosimeters in ethanol-water solution with a broad pH span (5-10) and high selectivity toward Hg²⁺ but no significant response toward other common competitive cations. The Hg²⁺-promoted ring opening of spirolactam of the rhodamine moiety induced cyclic guanylation of the thiourea moiety, which resulted in the dual chromo- and fluorogenic observation (off-on). Cytotoxicity and bioimaging studies by L929 living cells and living mice indicated that the probes were negligible cytotoxicity, cell permeable and suitable for detecting Hg²⁺ in biological environments. Moreover, the new probes not only displayed excellent abilities for the successful detection of Hg²⁺ in L929 living cells and living mice but also able to detect Hg²⁺ by adsorbing on solid surfaces and quantitative detection of Hg²⁺ in real water samples with good recovery (more than 90%), indicating that they have promising prospect for application for Hg²⁺ sensing in environmental and biological sciences.

Fluorescent detection of multiple ions by two related chemosensors: structural elucidations and logic gate applications

Two related chemosensors L1 and L2 display selective detection of multiple ions (Cu²⁺, Al³⁺, Cd²⁺ and S²⁻) as a result of minor variation of functional groups at a remote arene ring.

A Schiff base platform: structures, sensing of Zn(ii) and PPi in aqueous medium and anticancer activity

A Schiff base platform was explored to present structural aspects of its Zn(ii) and Cd(ii) coordination compounds, sensing behavior towards Zn(ii) and PPi in aqueous medium and anticancer activity.

A 4,5-quinolimide-based fluorescent sensor for the turn-on detection of Cd2+ with live-cell imaging

The first 4,5-quinolimide sensor, BNA, bearing the amide-DPA receptor, was reported for sensing Cd²⁺ with live-cell imaging.

A new fluorescent probe based on quinoline for detection of Al3+ and Fe3+ with “off–on–off” response in aqueous solution

A new quinoline-based fluorescent probe has been designed and synthesized. It showed highly selective relay recognition of Al³⁺ and Fe³⁺via a fluorescence “off–on–off” mechanism by central metal displacement.

A selective fluorescent probe for the detection of Cd2+ in different buffer solutions and water

A fluorescent probe NHQ, which exhibited excellent selectivity toward Cd²⁺ in different buffer solutions such as Tris-HCl buffer solution, HEPES buffer solution, and PBS buffer solution, and even in water, was developed.